Search PubMed⌕ Search

Biomedical subjects

H Bayley

Publications and source records attributed to H Bayley.

At least 37 records · Page 2Linked to original sources
PubMed1999

Heptameric structures of two alpha-hemolysin mutants imaged with in situ atomic force microscopy.

Atomic force microscopy has been used to study self-assembled structures of two alpha-hemolysin mutants. For a mutant (alphaHL-H5) that was locked into the prepore state on fluid phase egg-PC membranes, we visualized, for the first time, heptameric prepores and showed that the 7-fold axis in the prepore lies perpendicular to the membrane surface. For another mutant (TCM) with the transmembrane domain, the self-assembled oligomer that assumes the conformation of the fully assembled pore is also a heptamer. These results show that heptamers are the preferred oligomerization state of alpha-hemolysin.

Bacterial Toxins↗
PubMed1999

Genetically engineered metal ion binding sites on the outside of a Channel's transmembrane beta-barrel.

We are exploring the ability of genetically engineered versions of the Staphylococcus aureus alpha-hemolysin (alphaHL) ion channel to serve as rationally designed sensor components for analytes including divalent cations. We show here that neither the hemolytic activity nor the single channel current of wild-type alphaHL was affected by [Zn(II)] </= 1 mM. Binding sites for the divalent cations were formed by altering the number and location of coordinating side chains, e.g., histidines and aspartic acids, between positions 126 and 134, inclusive. Several mutant alphaHLs exhibited Zn(II)-induced current noise that varied with Zn(II) concentration. At a fixed divalent cation concentration, the current fluctuation kinetics depended on the analyte type, e.g., Zn(II), Cu(II), Ni(II), and Co(II). We also show that the ability of Zn(II) to change the mutant channel current suggests that the pore's topology is beta-sheet and that position 130 is near the turn at the trans mouth. Both conclusions are consistent with the crystal structure of WT-alphaHL oligomerized in detergent. Our results, in the context of the channel's crystal structure, suggest that conductance blockades were caused by Zn(II) binding to the outside surface of the pore. Thus, analyte-induced current blockades alone might not establish whether an analyte binding site is inside a pore.

Amino Acid Sequence↗
PubMed1999

Designed membrane channels and pores.

Advances in the synthesis and assembly of designed membrane channels and pores include addressable template-assisted synthetic protein (TASP) syntheses of helix bundles, the production of a new class of nanotubes and the ability to purify hetero-oligomeric pores. Channels and pores with altered functional properties and with built-in triggers and switches have been prepared. Progress in applications has been greatest in sensor technology, where sensor elements based on ligand activation, channel selectivity and channel block have been made. Structural information about natural membrane proteins is emerging to inspire new designs.

Biological Transport↗
PubMed1999

A functional protein pore with a "retro" transmembrane domain.

Extended retro (reversed) peptide sequences have not previously been accommodated within functional proteins. Here, we show that the entire transmembrane portion of the beta-barrel of the pore-forming protein alpha-hemolysin can be formed by retrosequences comprising a total of 175 amino acid residues, 25 contributed by the central sequence of each subunit of the heptameric pore. The properties of wild-type and retro heptamers in planar bilayers are similar. The single-channel conductance of the retro pore is 15% less than that of the wild-type heptamer and its current-voltage relationship denotes close to ohmic behavior, while the wild-type pore is weakly rectifying. Both wild-type and retro pores are very weakly anion selective. These results and the examination of molecular models suggest that beta-barrels may be especially accepting of retro sequences compared to other protein folds. Indeed, the ability to form a retro domain could be diagnostic of a beta-barrel, explaining, for example, the activity of the retro forms of many membrane-permeabilizing peptides. By contrast with the wild-type subunits, monomeric retro subunits undergo premature assembly in the absence of membranes, most likely because the altered central sequence fails to interact with the remainder of the subunit, thereby initiating assembly. Despite this difficulty, a technique was devised for obtaining heteromeric pores containing both wild-type and retro subunits. Most probably as a consequence of unfavorable interstrand side-chain interactions, the heteromeric pores are less stable than either the wild-type or retro homoheptamers, as judged by the presence of subconductance states in single-channel recordings. Knowledge about the extraordinary plasticity of the transmembrane beta-barrel of alpha-hemolysin will be very useful in the de novo design of functional membrane proteins based on the beta-barrel motif.

Amino Acid Sequence↗
PubMed1998

Self-assembled alpha-hemolysin pores in an S-layer-supported lipid bilayer.

The effects of a supporting proteinaceous surface-layer (S-layer) from Bacillus coagulans E38-66 on a 1,2-diphytanoyl-sn-glycero-3-phosphatidylcholine (DPhPC) bilayer were investigated. Comparative voltage clamp studies on plain and S-layer supported DPhPC bilayers revealed no significant difference in the capacitance. The conductance of the composite membrane decreased slightly upon recrystallization of the S-layer. Thus, the attached S-layer lattice did not interpenetrate or rupture the DPhPC bilayer. The self-assembly of a pore-forming protein into the S-layer supported lipid bilayer was examined. Staphylococcal alpha-hemolysin formed lytic pores when added to the lipid-exposed side. The assembly was slow compared to unsupported membranes, perhaps due to an altered fluidity of the lipid bilayer. No assembly could be detected upon adding alpha-hemolysin monomers to the S-layer-faced side of the composite membrane. Therefore, the intrinsic molecular sieving properties of the S-layer lattice do not allow passage of alpha-hemolysin monomers through the S-layer pores to the lipid bilayer. In comparison to plain lipid bilayers, the S-layer supported lipid membrane had a decreased tendency to rupture in the presence of alpha-hemolysin.

Bacillus↗
PubMed1998

Purification and characterization of recombinant spider silk expressed in Escherichia coli.

A partial cDNA clone, from the 3' end of the dragline silk gene was isolated from Nephila clavipes major ampullate glands. This clone contains a 1.7-kb insert, consisting of a repetitive coding region of 1.4-kb and a 0.3-kb nonrepetitive coding region; 1.5-kb of the 1.7-kb fragment was cloned into Escherichia coli and a 43-kDa recombinant silk protein was expressed. Characterization of the purified protein by Western blot, amino acid composition analysis, and matrix-assisted laser desorption ionization/time-of-flight mass spectrometry confirms it to be spider dragline silk.

Amino Acid Sequence↗
PubMed1997

Toxin structure: part of a hole?

The structure of the monomeric form of perfringolysin O solved by X-ray crystallography has been used to model the very large transmembrane pore formed when this bacterial protein toxin assembles in cholesterol-containing membranes. The structure is a notable advance, but it may not provide the whole story.

Bacterial Toxins↗
PubMed1997

Transmembrane beta-barrel of staphylococcal alpha-toxin forms in sensitive but not in resistant cells.

Staphylococcal alpha-toxin is a 293-residue, single-chain polypeptide that spontaneously assembles into a heptameric pore in target cell membranes. To identify the pore-forming domain, substitution mutants have been produced in which single cysteine residues were introduced throughout the toxin molecule. By attaching the environmentally sensitive dye acrylodan to the sulfhydryl groups, the environment of individual amino acid side chains could be probed. In liposomes, a single 23-amino acid sequence (residues 118-140) was found to move from a polar to a nonpolar environment, indicating that this sequence forms the walls of the pore. However, periodicity in side chain environmental polarity could not be detected in the liposomal system. In the present study, the fluorimetric analyses were extended to physiological target cells. With susceptible cells such as rabbit erythrocytes and human lymphocytes, the 23 central amino acids 118-140 were again found to insert into the membrane; in contrast to the previous study with liposomes, the expected periodicity was now detected. Thus, every other residue in the sequence 126-140 entered a nonpolar environment in a striking display of an amphipathic transmembrane beta-barrel. In contrast, human granulocytes were found to bind alpha-toxin to a similar extent as lymphocytes, but the heptamers forming on these cells failed to insert their pore-forming domain into the membrane. As a consequence, nonfunctional heptamers assembled and the cells remained viable. The data resolve the molecular organization of a pore-forming toxin domain in living cells and reveal that resistant cells can prevent insertion of the functional domain into the bilayer.

Adenosine Triphosphate↗
PubMed1997

The heptameric prepore of a staphylococcal alpha-hemolysin mutant in lipid bilayers imaged by atomic force microscopy.

We have used atomic force microscopy to study the oligomeric state of a genetically engineered mutant of staphylococcal alpha-hemolysin (alphaHL-H5) that can be arrested as a "prepore" assembly intermediate. AFM images of alphaHL-H5 on supported bilayers of a fluid-phase lipid, egg-yolk phosphatidylcholine (egg-PC), under conditions that lock alphaHL-H5 into the prepore state, clearly show a heptameric structure for many individual oligomers. The central dent of the prepore has a diameter of 3.2 +/- 0.2 nm. The distance between the centers of mass of neighboring subunits is 2.8 +/- 0.3 nm. The heptamer has an average diameter of 8.9 +/- 0.6 nm. These results support a recently proposed pathway for the assembly of alpha-hemolysin.

Bacterial Toxins↗
PubMed1997

Caged cysteine and thiophosphoryl peptides.

Photoreleasable molecules are important in studies of various biological phenomena, especially cell signaling. Here we report a generally applicable approach for 'caging' unprotected cysteine-containing or thiophosphorylated peptides in aqueous solution with 2-nitrobenzyl bromides. Photolysis of the caged peptides was achieved with near UV light with product quantum efficiencies of 0.064-0.62 under conditions that produced no damage to attendant biological macromolecules. Yields of uncaged peptides were 55-70%. Selective reaction of the side-chain of thiophosphoryl serine with 2-nitrobenzyl bromide in the presence of a cysteinyl residue was also demonstrated, establishing a means for functional caging of various signal transduction proteins without prior modification or mutagenesis.

Cysteine↗
PubMed1997

Designed protein pores as components for biosensors.

BACKGROUND: There is a pressing need for new sensors that can detect a variety of analytes, ranging from simple ions to complex compounds and even microorganisms. The devices should offer sensitivity, speed, reversibility and selectivity. Given these criteria, protein pores, remodeled so that their transmembrane conductances are modulated by the association of specific analytes, are excellent prospects as components of biosensors. RESULTS: Structure-based design and a separation method that employs targeted chemical modification have been used to obtain a heteromeric form of the bacterial pore-forming protein staphylococcal alpha-hemolysin, in which one of the seven subunits contains a binding site for a divalent metal ion, M(II), which serves as a prototypic analyte. The single-channel current of the heteromer in planar bilayers is modulated by nanomolar Zn(II). Other M(II)s modulate the current and produce characteristic signatures. In addition, heteromers containing more than one mutant subunit exhibit distinct responses to M(II)s Hence, a large collection of responsive pores can be generated through subunit diversity and combinatorial assembly. CONCLUSIONS: Engineered pores have several advantages as potential sensor elements: sensitivity is in the nanomolar range; analyte binding is rapid (diffusion limited in some cases) and reversible; strictly selective binding is not required because single-channel recordings are rich in information; and for a particular analyte, the dissociation rate constant, the extent of channel block and the voltage-dependence of these parameters are distinguishing, while the frequency of partial channel block reflects the analyte concentration. A single sensor element might, therefore, be used to quantitate more than one analyte at once. The approach described here can be generalized for additional analytes.

Bacterial Toxins↗
PubMed1997

Reversible permeabilization of plasma membranes with an engineered switchable pore.

By using an engineered, self-assembling, proteinaceous, 2-nm pore equipped with a metal-actuated switch, a technique to reversibly permeabilize the plasma membrane to small molecules (approximately 1000 Da) has been developed. We have demonstrated the dose-dependent permeabilization of fibroblasts by pores designed to be blocked and unblocked by the addition and removal of microM concentrations of Zn2+. Further, we have shown that the activity of the switch allows permeabilized cells to maintain viability and ultrastructural integrity following the unconstrained flux of small molecules. This ability to control the transmembrane influx and efflux of molecules and thereby vary the intracellular environment yet maintain cell viability will impact an array of biological and medical problems.

3T3 Cells↗