Search PubMed⌕ Search

Biomedical subjects

H Bayley

Publications and source records attributed to H Bayley.

At least 19 recordsLinked to original sources
PubMed2000

Surface-accessible residues in the monomeric and assembled forms of a bacterial surface layer protein.

The S-layer protein SbsB of the thermophilic, Gram-positive organism Bacillus stearothermophilus PV72/p2 forms a crystalline, porous array constituting the outermost component of the cell envelope. SbsB has a molecular mass of 98 kDa, and the corresponding S-layer exhibits an oblique lattice symmetry. To investigate the molecular structure and assembly of SbsB, we replaced 75 residues (mainly serine, threonine, and alanine), located throughout the primary sequence, with cysteine, which is not found in the wild-type protein. As determined by electron microscopy, 72 out of 75 mutants formed regularly-structured self-assembly products identical to wild-type, thereby proving that the replacement of most of the selected amino acids by cysteine does not dramatically alter the structure of the protein. The three defective mutants, which showed a greatly reduced ability to self-assemble, were, however, successfully incorporated into S-layers of wild-type protein. Monomeric SbsB mutants and SbsB mutants assembled into S-layers were subjected to a surface accessibility screen by targeted chemical modification with a 5-kDa hydrophilic cysteine-reactive polyethylene glycol conjugate. In the monomeric form of SbsB, 34 of the examined residues were not surface accessible, while 23 were classified as very accessible, and 18 were of intermediate surface accessibility. By contrast, in the assembled S-layers, 57 of the mutated residues were not accessible, six were very accessible, and 12 of intermediate accessibility. Together with other structural information, the results suggest a model for SbsB in which functional domains are segregated along the length of the polypeptide chain.

Bacterial Proteins↗
PubMed2000

Reversal of charge selectivity in transmembrane protein pores by using noncovalent molecular adapters.

In this study, the charge selectivity of staphylococcal alpha-hemolysin (alphaHL), a bacterial pore-forming toxin, is manipulated by using cyclodextrins as noncovalent molecular adapters. Anion-selective versions of alphaHL, including the wild-type pore and various mutants, become more anion selective when beta-cyclodextrin (betaCD) is lodged within the channel lumen. By contrast, the negatively charged adapter, hepta-6-sulfato-beta-cyclodextrin (s(7)betaCD), produces cation selectivity. The cyclodextrin adapters have similar effects when placed in cation-selective mutant alphaHL pores. Most probably, hydrated Cl(-) ions partition into the central cavity of betaCD more readily than K(+) ions, whereas s(7)betaCD introduces a charged ring near the midpoint of the channel lumen and confers cation selectivity through electrostatic interactions. The molecular adapters generate permeability ratios (P(K+)/P(Cl-)) over a 200-fold range and should be useful in the de novo design of membrane channels both for basic studies of ion permeation and for applications in biotechnology.

Anions↗
PubMed2000

Intracellular trehalose improves the survival of cryopreserved mammalian cells.

We report that the introduction of low concentrations of intracellular trehalose can greatly improve the survival of mammalian cells during cryopreservation. Using a genetically engineered mutant of Staphylococcus aureus alpha-hemolysin to create pores in the cellular membrane, we were able to load trehalose into cells. Low concentrations (0.2 M) of trehalose permitted long-term post-thaw survival of more than 80% of 3T3 fibroblasts and 70% of human keratinocytes. These results indicate that simplified and widely applicable freezing protocols may be possible using sugars as intracellular cryoprotective additives.

3T3 Cells↗
PubMed2000

Simultaneous stochastic sensing of divalent metal ions.

Stochastic sensing is an emerging analytical technique that relies upon single-molecule detection. Transmembrane pores, into which binding sites for analytes have been placed by genetic engineering, have been developed as stochastic sensing elements. Reversible occupation of an engineered binding site modulates the ionic current passing through a pore in a transmembrane potential and thereby provides both the concentration of an analyte and, through a characteristic signature, its identity. Here, we show that the concentrations of two or more divalent metal ions in solution can be determined simultaneously with a single sensor element. Further, the sensor element can be permanently calibrated without a detailed understanding of the kinetics of interaction of the metal ions with the engineered pore.

Binding Sites↗
PubMed1999

Stochastic sensing of organic analytes by a pore-forming protein containing a molecular adapter.

The detection of organic molecules is important in many areas, including medicine, environmental monitoring and defence. Stochastic sensing is an approach that relies on the observation of individual binding events between analyte molecules and a single receptor. Engineered transmembrane protein pores are promising sensor elements for stochastic detection, and in their simplest manifestation they produce a fluctuating binary ('on/off') response in the transmembrane electrical current. The frequency of occurrence of the fluctuations reveals the concentration of the analyte, and its identity can be deduced from the characteristic magnitude and/or duration of the fluctuations. Genetically engineered versions of the bacterial pore-forming protein alpha-haemolysin have been used to identify and quantify divalent metal ions in solution. But it is not immediately obvious how versatile binding sites for organic ligands might be obtained by engineering of the pore structure. Here we show that stochastic sensing of organic molecules can be procured from alpha-haemolysin by equipping the channel with an internal, non-covalently bound molecular 'adapter' which mediates channel blocking by the analyte. We use cyclodextrins as the adapters because these fit comfortably inside the pore and present a hydrophobic cavity suitable for binding a variety of organic analytes. Moreover, a single sensing element of this sort can be used to analyse a mixture of organic molecules with different binding characteristics. We envisage the use of other adapters, so that the pore could be 'programmed' for a range of sensing functions.

Bacterial Toxins↗
PubMed1999

Heptameric structures of two alpha-hemolysin mutants imaged with in situ atomic force microscopy.

Atomic force microscopy has been used to study self-assembled structures of two alpha-hemolysin mutants. For a mutant (alphaHL-H5) that was locked into the prepore state on fluid phase egg-PC membranes, we visualized, for the first time, heptameric prepores and showed that the 7-fold axis in the prepore lies perpendicular to the membrane surface. For another mutant (TCM) with the transmembrane domain, the self-assembled oligomer that assumes the conformation of the fully assembled pore is also a heptamer. These results show that heptamers are the preferred oligomerization state of alpha-hemolysin.

Bacterial Toxins↗
PubMed1999

Genetically engineered metal ion binding sites on the outside of a Channel's transmembrane beta-barrel.

We are exploring the ability of genetically engineered versions of the Staphylococcus aureus alpha-hemolysin (alphaHL) ion channel to serve as rationally designed sensor components for analytes including divalent cations. We show here that neither the hemolytic activity nor the single channel current of wild-type alphaHL was affected by [Zn(II)] </= 1 mM. Binding sites for the divalent cations were formed by altering the number and location of coordinating side chains, e.g., histidines and aspartic acids, between positions 126 and 134, inclusive. Several mutant alphaHLs exhibited Zn(II)-induced current noise that varied with Zn(II) concentration. At a fixed divalent cation concentration, the current fluctuation kinetics depended on the analyte type, e.g., Zn(II), Cu(II), Ni(II), and Co(II). We also show that the ability of Zn(II) to change the mutant channel current suggests that the pore's topology is beta-sheet and that position 130 is near the turn at the trans mouth. Both conclusions are consistent with the crystal structure of WT-alphaHL oligomerized in detergent. Our results, in the context of the channel's crystal structure, suggest that conductance blockades were caused by Zn(II) binding to the outside surface of the pore. Thus, analyte-induced current blockades alone might not establish whether an analyte binding site is inside a pore.

Amino Acid Sequence↗
PubMed1999

Designed membrane channels and pores.

Advances in the synthesis and assembly of designed membrane channels and pores include addressable template-assisted synthetic protein (TASP) syntheses of helix bundles, the production of a new class of nanotubes and the ability to purify hetero-oligomeric pores. Channels and pores with altered functional properties and with built-in triggers and switches have been prepared. Progress in applications has been greatest in sensor technology, where sensor elements based on ligand activation, channel selectivity and channel block have been made. Structural information about natural membrane proteins is emerging to inspire new designs.

Biological Transport↗
PubMed1999

A functional protein pore with a "retro" transmembrane domain.

Extended retro (reversed) peptide sequences have not previously been accommodated within functional proteins. Here, we show that the entire transmembrane portion of the beta-barrel of the pore-forming protein alpha-hemolysin can be formed by retrosequences comprising a total of 175 amino acid residues, 25 contributed by the central sequence of each subunit of the heptameric pore. The properties of wild-type and retro heptamers in planar bilayers are similar. The single-channel conductance of the retro pore is 15% less than that of the wild-type heptamer and its current-voltage relationship denotes close to ohmic behavior, while the wild-type pore is weakly rectifying. Both wild-type and retro pores are very weakly anion selective. These results and the examination of molecular models suggest that beta-barrels may be especially accepting of retro sequences compared to other protein folds. Indeed, the ability to form a retro domain could be diagnostic of a beta-barrel, explaining, for example, the activity of the retro forms of many membrane-permeabilizing peptides. By contrast with the wild-type subunits, monomeric retro subunits undergo premature assembly in the absence of membranes, most likely because the altered central sequence fails to interact with the remainder of the subunit, thereby initiating assembly. Despite this difficulty, a technique was devised for obtaining heteromeric pores containing both wild-type and retro subunits. Most probably as a consequence of unfavorable interstrand side-chain interactions, the heteromeric pores are less stable than either the wild-type or retro homoheptamers, as judged by the presence of subconductance states in single-channel recordings. Knowledge about the extraordinary plasticity of the transmembrane beta-barrel of alpha-hemolysin will be very useful in the de novo design of functional membrane proteins based on the beta-barrel motif.

Amino Acid Sequence↗
PubMed1998

Self-assembled alpha-hemolysin pores in an S-layer-supported lipid bilayer.

The effects of a supporting proteinaceous surface-layer (S-layer) from Bacillus coagulans E38-66 on a 1,2-diphytanoyl-sn-glycero-3-phosphatidylcholine (DPhPC) bilayer were investigated. Comparative voltage clamp studies on plain and S-layer supported DPhPC bilayers revealed no significant difference in the capacitance. The conductance of the composite membrane decreased slightly upon recrystallization of the S-layer. Thus, the attached S-layer lattice did not interpenetrate or rupture the DPhPC bilayer. The self-assembly of a pore-forming protein into the S-layer supported lipid bilayer was examined. Staphylococcal alpha-hemolysin formed lytic pores when added to the lipid-exposed side. The assembly was slow compared to unsupported membranes, perhaps due to an altered fluidity of the lipid bilayer. No assembly could be detected upon adding alpha-hemolysin monomers to the S-layer-faced side of the composite membrane. Therefore, the intrinsic molecular sieving properties of the S-layer lattice do not allow passage of alpha-hemolysin monomers through the S-layer pores to the lipid bilayer. In comparison to plain lipid bilayers, the S-layer supported lipid membrane had a decreased tendency to rupture in the presence of alpha-hemolysin.

Bacillus↗
PubMed1998

Purification and characterization of recombinant spider silk expressed in Escherichia coli.

A partial cDNA clone, from the 3' end of the dragline silk gene was isolated from Nephila clavipes major ampullate glands. This clone contains a 1.7-kb insert, consisting of a repetitive coding region of 1.4-kb and a 0.3-kb nonrepetitive coding region; 1.5-kb of the 1.7-kb fragment was cloned into Escherichia coli and a 43-kDa recombinant silk protein was expressed. Characterization of the purified protein by Western blot, amino acid composition analysis, and matrix-assisted laser desorption ionization/time-of-flight mass spectrometry confirms it to be spider dragline silk.

Amino Acid Sequence↗
PubMed1997

Toxin structure: part of a hole?

The structure of the monomeric form of perfringolysin O solved by X-ray crystallography has been used to model the very large transmembrane pore formed when this bacterial protein toxin assembles in cholesterol-containing membranes. The structure is a notable advance, but it may not provide the whole story.

Bacterial Toxins↗
PubMed1997

Transmembrane beta-barrel of staphylococcal alpha-toxin forms in sensitive but not in resistant cells.

Staphylococcal alpha-toxin is a 293-residue, single-chain polypeptide that spontaneously assembles into a heptameric pore in target cell membranes. To identify the pore-forming domain, substitution mutants have been produced in which single cysteine residues were introduced throughout the toxin molecule. By attaching the environmentally sensitive dye acrylodan to the sulfhydryl groups, the environment of individual amino acid side chains could be probed. In liposomes, a single 23-amino acid sequence (residues 118-140) was found to move from a polar to a nonpolar environment, indicating that this sequence forms the walls of the pore. However, periodicity in side chain environmental polarity could not be detected in the liposomal system. In the present study, the fluorimetric analyses were extended to physiological target cells. With susceptible cells such as rabbit erythrocytes and human lymphocytes, the 23 central amino acids 118-140 were again found to insert into the membrane; in contrast to the previous study with liposomes, the expected periodicity was now detected. Thus, every other residue in the sequence 126-140 entered a nonpolar environment in a striking display of an amphipathic transmembrane beta-barrel. In contrast, human granulocytes were found to bind alpha-toxin to a similar extent as lymphocytes, but the heptamers forming on these cells failed to insert their pore-forming domain into the membrane. As a consequence, nonfunctional heptamers assembled and the cells remained viable. The data resolve the molecular organization of a pore-forming toxin domain in living cells and reveal that resistant cells can prevent insertion of the functional domain into the bilayer.

Adenosine Triphosphate↗