Biomedical subjects

D O Kuethe

Publications and source records attributed to D O Kuethe.

9 recordsLinked to original sources

PubMed2000

Imaging obstructed ventilation with NMR using inert fluorinated gases.

We partially obstructed the left bronchi of rats and imaged an inert insoluble gas, SF(6), in the lungs with NMR using a technique that clearly differentiates obstructed and normal ventilation. When the inhaled fraction of O(2) is high, SF(6) concentrates dramatically in regions of the lung with low ventilation-to-perfusion ratios (VA/Q); therefore, these regions are brighter in an image than where VA/Q values are normal or high. A second image, made when the inhaled fraction of O(2) is low, serves as a reference because the SF(6) fraction is nearly uniform, regardless of VA/Q. The quotient of the first and second images displays the low-VA/Q regions and is corrected for other causes of brightness variation. The technique may provide sufficient quantification of VA/Q to be a useful research tool. The noise in the quotient image is described by the probability density function for the quotient of two normal random variables. When the signal-to-noise ratio of the denominator image is >10, the signal-to-noise ratio of the quotient image is similar to that of the parent images and decreases with pixel value.

Animals↗

PubMed1999

Effects of gas density on experimentally obstructed ventilation during acute hypoxia.

When patients with obstructive lung disease breathe helium-oxygen mixtures, their arterial PCO2, is lowered towards normal, indicating more effective ventilation. However, there is a lack of detailed respiratory data from clinical cases, so that the mechanisms remain unclear. To study relevant variables during hypoxemia and obstruction in the absence of disease, we undertook experiments with healthy subjects breathing normoxic and hypoxic gas mixtures of differing densities (air, 13.7% O2 in N2 and 13.7% O2 in helium) through an experimental obstruction (resistive airway loading). This increased airway resistance was twice that reported from the ambient-pleural pressure differences in patients with moderately severe emphysema. Without imposed resistance the total ventilation (VE) increased 27% on both hypoxic mixtures. With normoxia, the obstruction increased tidal volume but decreased frequency so that VE and alveolar ventilation (VA) were essentially unchanged. With hypoxia, breathing pattern changed similarly, but now VE decreased while VA was maintained. Helium returned the breathing patterns toward normal. Obstruction lowered the rapid increase in VE from two or three breaths of N2, but the decrease from two or three breaths of O2 was unchanged. We detected an increase in metabolic rate with obstructed breathing that was reduced by the helium mixtures. The remarkable finding was that despite the obstruction being markedly uncomfortable because of the high resistance, we did not find any substantial disturbance in gas exchange, compared to hypoxia with no obstruction. Thus, the main mechanisms responsible for improved blood gases in patients breathing helium mixtures were outside the scope of our experiment and likely related to disease factors.

Adult↗

PubMed1999

Transforming NMR data despite missing points.

Some NMR experiments produce data with several of the initial points missing. The inverse discrete Fourier transform (IDFT) assumes these points are present so the data cannot be so transformed without artifact-ridden results. This problem is often particularly severe when projection imaging with free-induction decays (FIDs). This paper compares recent methods for obtaining a projection from incomplete data and elaborates on their strengths and limitations. One method is to write the transform that would take the desired projection to the truncated data set, and then solve the matrix equation by singular value decomposition. A second replaces the missing data with zeros, so that an IDFT produces a projection with unwanted artifacts. Then one solves the matrix equation that takes the desired projection to the artifact-ridden projection. A third uses the same artifact-ridden projection, but fits the region outside the bandwidth of the sample with as many sinusoidal functions as there are missing data. The coefficients of these functions are estimates of the missing data, and the projection is obtained by transforming the completed FID or subtracting the extrapolation of the fitted curve from the region containing the object. We show that when all three methods are applicable, they theoretically produce the same result. They differ by ease of implementation and possibly by computational errors. They give a result similar to that of the previous method that iteratively corrects the FID and projection after repeated IDFTs and DFTs. We find that one can obtain a projection despite missing a substantial number of data.

Artifacts↗

PubMed1998

Imaging lungs using inert fluorinated gases.

Rat lungs were imaged by 19F projection MRI of hexafluoroethane, mixed with 20% oxygen to form the inhaled gas. The 3D image had 700 microm resolution, and the data took 4.3 h to acquire. Free induction decays were collected in the presence of steady magnetic field gradients in 686 different directions. To take advantage of fast relaxation (T1 = 5.9 +/- 0.2 ms), the repetition time was 5 ms. To eliminate signal loss from magnetic field inhomogeneities, data were collected within 2 ms of spin excitation (from 80 micros to 2 ms after the 42-micros pi/2 pulses). The singular value decomposition of the transform from frequency to time domain was used to obtain projections despite the absence of data during and immediately after the RF pulses. Inert fluorinated gas imaging may be less expensive than polarized noble gas imaging and is appropriate for imaging steady-state rather than transient gas concentrations.

Animals↗

PubMed1998

A programmable pre-emphasis system.

MRI systems often use magnetic field gradient and shim pulse-shaping networks (pre-emphasis) to correct for magnetic field distortions caused by eddy currents. A pre-emphasis system that uses up to 16 fixed resistor-capacitor (RC) time constants per channel with programmable amplitude coefficients is described. The magnetic fields induced by the pre-emphasis RC time constants serve as a set of basis functions for compensating eddy-current fields induced by the gradient set. The resultant time-varying magnetic field gradient accurately reflects the gradient specified by the pulse programmer. Reductions in eddy-current fields are demonstrated for actively shielded and unshielded gradient sets.

Artifacts↗

PubMed1991

Non-ferromagnetic retinal tacks are a tolerable risk in magnetic resonance imaging.

Should patients with cobalt alloy (ASTM F563) retinal tacks (Grieshaber cat. #611.95) in their eyes be subjected to the magnetic fields used in magnetic resonance imaging? Although the tacks are not ferromagnetic, they will experience a retarding torque when they are moved at the high angular velocities of human eye motion. Because retinal tacks are small (2.85 mm x 0.9 mm), the torque is difficult to measure. Rather, we measured the torque on a model 25.4 times larger and used a scaling law derived from Maxwell's equations to calculate the force on the tack. The scaling law states that the torque varies with the cube of the object's length. To mimic the motion, models of retinal tacks were attached to Plexiglas rods and the assemblies were swung as pendulums. The pendulums were oriented in the magnetic field of a 1.5 T imager to experience the greatest retardation. Retarding torques were estimated from the rate of decrease of the pendulum amplitude, both inside and outside the magnet. Even if the retinal tacks were as conductive as 6061T6 aluminum alloy (25 MS/m) and the velocity of the surface of the eye were 24 cm/s (angular vel. of 1130 deg/s), the retarding torque would be only 1.6 times the weight of the tack acting with a lever arm as long as the distance from its tip to its center of gravity. The maximum retarding torque on an implanted retinal tack in a 1.5 T magnet is similar to the torque produced by gravity alone acting on the tack and is a tolerable risk.(ABSTRACT TRUNCATED AT 250 WORDS)

Alloys↗

PubMed1989

Fluid shear and spin-echo images.

Because clinical studies have indicated that shear in fluids may be one of the major causes of magnetic resonance image artifacts, we imaged an apparatus that would separate the effects of shear from the plethora of other motion artifacts. The apparatus contained fluid between two concentric cylinders. To produce shear, we turned the outer cylinder. To produce motion without shear, we turned both cylinders as one. Shear rates near 200 s-1 (similar to those in large arteries) can cause pixel intensities either to increase 40% or decrease to background levels. Increases can occur when the velocities are nearly parallel to the phase-encoding gradient. Decreases can occur when velocities are in the direction of the frequency gradient. The decreases are similar to those predicted from phase dispersion within a "voxel" so long as the voxel's phase warp does not exceed 2 pi.

Body Fluids↗

PubMed1988

Effects of turbulence on signal intensity in gradient echo images.

Although the appearance of laminar vascular flow in magnetic resonance (MR) images has been characterized, there is no general agreement about the effect of turbulent flow on MR signal intensity. This study uses a fast scan gradient echo pulse sequence to evaluate nonpulsatile turbulent flow in two different models. The first model simulated flow in normal vascular structure. It generated nonpulsatile, laminar and turbulent flow in straight, smooth-walled Plexiglas tubes. The second model simulated flow through a vascular stenosis. It generated nonpulsatile, laminar, and turbulent flow through an orifice. Velocities and flow rates ranged from low physiologic to well above the physiologic range (velocity = .3 to 280 cm/second, flow rate from .15 to 40 L/minute). Transition from laminar to turbulent flow was observed with dye streams. Turbulent flow in straight, smooth-walled vessels was not associated with a decrease in MR signal intensity even at the highest velocities and flow rates studied. The transition from laminar to turbulent flow through an orifice is not associated with a decrease in gradient echo signal intensity. As the intensity of the turbulent flow increases, however, there is a threshold above which signal intensity decreases linearly as turbulence increases (r = .97). This study suggests that flow in normal vascular structures should not be associated with decreased signal intensity in gradient echo images. Turbulent flow through areas such as valves, valvular lesions or vascular stenoses, may be associated with a decrease in gradient echo signal intensity.

Blood Flow Velocity↗

PubMed1988

Fluid mechanical valving of air flow in bird lungs.

The unidirectional flow through the gas-exchanging bronchi of bird lungs is known to be effected by (1) the structure of the major bronchi and (2) a pressure difference between the cranial and caudal air sacs. To study the effects of bronchial structure, simple physical models of bird lungs were constructed. They suggested that, to achieve unidirectional flow, air in the caudal portion of the primary bronchus must be directed towards the orifices of the mediodorsal bronchi. To study the effect of air sac pressures, a controllable pressure difference was produced between the air sac orifices of fixed duck lungs. The cranial orifices had a higher pressure than the caudal ones during inhalation and vice versa during exhalation. There was a set of pressure differences for which the paleopulmo received the same flow rate during inhalation as during exhalation. High pressure differences caused more flow in the paleopulmo during exhalation than during inhalation; low pressure differences had the converse effect.

Air Pressure↗