Search PubMed⌕ Search

Biomedical subjects

Cha Yong Choi

Publications and source records attributed to Cha Yong Choi.

35 records · Page 2Linked to original sources

Skin regeneration using keratinocytes and dermal fibroblasts cultured on biodegradable microspherical polymer scaffolds.

Bioartificial skin sheet grafts have been utilized to treat large burns and chronic ulcers. However, the trypsinization step to harvest cultured skin grafts from culture dishes damages the cells by breaking the anchoring proteins and lowers their uptake ratio after transplantation. In addition, epidermal sheet grafts require a long fabrication period. To overcome these limitations, we utilized biodegradable poly(lactide-co-glycolide) (PLGA) microspheres as both cell culture matrix and transplantation vehicle of skin cells for skin regeneration in this study. This method could avoid the trypsinization step and have a relatively short preparation period. Human keratinocytes and dermal fibroblasts cultured on PLGA microspheres in spinner flasks proliferated by 3.0-fold and 9.4-fold, respectively, after 10 days. When both types of cells cultured on PLGA microspheres were reinoculated onto culture dishes, the cells migrated from the PLGA microspheres to the culture dish surface, grew, and formed a confluent cell layer within 5 days, showing the growth and migration abilities of the cells cultured on PLGA microspheres. Full-thickness skin wounds created on the back of athymic mice were either treated with transplantation of keratinocytes and dermal fibroblasts cultured on microspheres (cell-transplanted group), treated with PLGA microspheres alone (microsphere-implanted group), or covered with dressing materials without treatment (untreated group). Three weeks after the treatments, differentiated epithelium that stained positively for cytokeratin, a marker of epidermis, was observed in the cell-transplanted group, while the microsphere-implanted group and untreated group showed incomplete reepithelialization. Dermal regeneration with positive staining for vimentin, a marker of dermal fibroblast, was observed in the cell-transplanted group. Regenerated dermis with positive staining for vimentin was partly observed in the microsphere-implanted group and untreated group. These results suggest that transplantation of keratinocytes and dermal fibroblasts cultured on PLGA microspheres could be potentially useful as an alternative to bioartificial skin grafts for the treatment of skin wounds.

Animals↗

Implantation of bone marrow mononuclear cells using injectable fibrin matrix enhances neovascularization in infarcted myocardium.

Neovascularization may improve cardiac function and prevent further scar tissue formation in infarcted myocardium. A number of studies have demonstrated that bone marrow-derived cells have the potential to induce neovascularization in ischemic tissues. In this study, we hypothesized that implantation of bone marrow mononuclear cells (BMMNCs) using injectable fibrin matrix further enhances neovascularization in infarcted myocardium compared to BMMNC implantation without matrix. To test this hypothesis, infarction was induced in rat myocardium by cryoinjury. Three weeks later, rat BMMNCs were mixed with fibrin matrix and injected into the infarcted myocardium. Injection of either BMMNCs or medium alone into infarcted myocardium served as controls. Eight weeks after the treatments, histological analyses indicated that implantation of BMMNCs using fibrin matrix resulted in more extensive tissue regeneration in the infarcted myocardium compared to BMMNC implantation without matrix. Examination with fluorescence microscopy revealed that cells labeled with a fluorescent dye prior to implantation survived in the infarcted myocardium at 8 weeks of implantation. Importantly, implantation of BMMNCs using fibrin matrix resulted in much more extensive neovascularization in infarcted myocardium than BMMNC implantation without matrix. The microvessel density in infarcted myocardium was significantly higher (p < 0.05) when BMMNCs were implanted using fibrin matrix (350 +/- 22 microvessels/mm2) compared to BMMNC implantation without matrix (262 +/- 13 microvessels/mm2) and medium injection (76 +/- 9 microvessels/mm2). In addition, average internal diameter of microvessels was significantly larger (p < 0.05) in BMMNC implantation with fibrin matrix group (14.6 +/- 1.2 microm) than BMMNC implantation without matrix group (10.2 +/- 0.7 microm) and medium injection group (7.3 +/- 0.5 microm). These results suggest that fibrin matrix could serve as a cell implantation matrix that enhances neovascularization efficacy for myocardial infarction treatment.

Animals↗

Mechano-active tissue engineering of vascular smooth muscle using pulsatile perfusion bioreactors and elastic PLCL scaffolds.

Blood vessels are subjected in vivo to mechanical forces in a form of radial distention, encompassing cyclic mechanical strain due to the pulsatile nature of blood flow. Vascular smooth muscle (VSM) tissues engineered in vitro with a conventional tissue engineering technique may not be functional, because vascular smooth muscle cells (VSMCs) cultured in vitro typically revert from a contractile phenotype to a synthetic phenotype. In this study, we hypothesized that pulsatile strain and shear stress stimulate VSM tissue development and induce VSMCs to retain the differentiated phenotype in VSM engineering in vitro. To test the hypothesis, rabbit aortic smooth muscle cells (SMCs) were seeded onto rubber-like elastic, three-dimensional PLCL [poly(lactide-co-caprolactone), 50:50] scaffolds and subjected to pulsatile strain and shear stress by culturing them in pulsatile perfusion bioreactors for up to 8 weeks. As control experiments, VSMCs were cultured on PLCL scaffolds statically. The pulsatile strain and shear stress enhanced the VSMCs proliferation and collagen production. In addition, a significant cell alignment in a direction radial to the distending direction was observed in VSM tissues exposed to radial distention, which is similar to that of native VSM tissues in vivo, whereas VSMs in VSM tissues engineered in the static condition randomly aligned. Importantly, the expression of SM alpha-actin, a differentiated phenotype of SMCs, was upregulated by 2.5-fold in VSM tissues engineered under the mechano-active condition, compared to VSM tissues engineered in the static condition. This study demonstrates that tissue engineering of VSM tissues in vitro by using pulsatile perfusion bioreactors and elastic PLCL scaffolds leads to the enhancement of tissue development and the retention of differentiated cell phenotype.

Animals↗

The enhancement of recombinant protein production by polymer nanospheres in cell suspension culture.

Recombinant Chinese hamster ovary (rCHO) cells are being increasingly used in industry for the production of recombinant therapeutic proteins. Three-dimensional suspension culture is preferred to two-dimensional monolayer culture for the efficient large-scale culture of rCHO cells and subsequent mass production of recombinant proteins. Previously, we have demonstrated that the use of plain polymer nanospheres enhances the growth of anchorage-dependent animal cells (human embryonic kidney 293 cells) in suspension culture in serum-containing medium. Vitronectin and fibronectin were adsorbed onto poly(lactic-co-glycolic acid) (PLGA) nanospheres (696 nm in average diameter) by immersing the nanospheres in fetal bovine serum. In this study, we investigated if the use of vitronectin/fibronectin-adsorbed polymer nanospheres enhances recombinant protein production in rCHO cell suspension culture in serum-free medium. Cell aggregate formation may be critical for the survival and growth of anchorage-dependent animal cells in suspension culture, and cells in single cell suspension may result in cell death. The addition of vitronectin/fibronectin-adsorbed nanospheres to rCHO cell suspension culture promoted the rate and efficiency of cell aggregate formation. The nanospheres enhanced cell growth (2.9 folds on day 10) and, importantly, recombinant antibody production (1.8 folds on day 14), compared to suspension culture without nanospheres. The viability of cells in the aggregates in the nanosphere-added culture was high for the entire culture period of 14 days. Apoptotic activity of cells was much lower in the nanosphere-added culture than in the culture without nanospheres on day 5. The nanosphere suspension culture method developed in this study may be useful for the mass production of recombinant proteins through large-scale suspension culture of anchorage-dependent animal cells.

Adsorption↗

Vascular patches tissue-engineered with autologous bone marrow-derived cells and decellularized tissue matrices.

Synthetic polymer vascular patches used in cardiovascular surgery have shortcomings such as thrombosis, intimal hyperplasia, calcification, infection, and no growth potential. Tissue-engineered vascular patches using autologous vascular cells may solve these problems. In this study, we developed a tissue-engineered vascular patch using autologous bone marrow-derived cells (BMCs) and decellularized tissue matrices. Vascular smooth muscle cells and endothelial cells were differentiated from bone marrow mononuclear cells in vitro. Tissue-engineered vascular patches were fabricated by seeding these cells onto decellularized canine inferior vena cava matrices and implanted into the inferior vena cava of dogs. Three weeks after implantation, the tissue-engineered vascular patches were patent with no sign of thrombus formation. Histological, immunohistochemical, and electron microscopic analyses of the vascular patches retrieved 3 weeks after implantation revealed regeneration of endothelium and smooth muscle and the presence of collagen and elastin. BMCs labeled with a fluorescent dye prior to implantation were detected in the retrieved vascular patches, indicating that the BMCs survived after implantation and contributed to the vascular tissue regeneration. This study demonstrates that vascular patches can be tissue-engineered with autologous BMCs and decellularized tissue matrices.

Animals↗

Engineering of volume-stable adipose tissues.

Autologous adipose tissues have been clinically used for augmentation of soft tissues lost due to mastectomy or lumpectomy in plastic and reconstructive surgery. However, this therapy has problems of absorption and subsequent volume loss of the implanted adipose tissues. In this study, volume-stable adipose tissues were engineered in vivo using mechanical support structures fabricated from biodegradable synthetic polymers. Dome-shaped mechanical support structures were fabricated by reinforcing poly(glycolic acid) fiber-based matrices with poly(L-lactic acid). The support structures were placed into subcutaneous pockets of athymic mice, and human preadipocytes suspended in fibrin matrix were injected into the space under the support structures (group I). Injection of either fibrin matrix without preadipocytes under the support structures (group II) or fibrin matrix containing preadipocytes into subcutaneous spaces with no support structures (group III) served as controls. Six weeks after implantation, the original implant volume was maintained approximately in groups I and II, whereas, group III showed significant implant shrinkage. The compressive modulus of the mechanical support structures did not change significantly over 6-week incubation in phosphate-buffered saline at 37 degrees C. Histological analyses of the implants showed regeneration of adipose tissues in group I. In contrast, groups II and III did not show extensive adipose tissue formation. This study demonstrates that volume-stable adipose tissues can be engineered in vivo using mechanical support structures. This technique offers the potential for augmentation of adipose tissues with volume conservation.

Adipocytes↗

A poly(lactic acid)/calcium metaphosphate composite for bone tissue engineering.

A new method to prepare PLA/CMP (poly-L-lactide/calcium metaphosphate) composite scaffolds was developed for effective bone tissue engineering. This novel sintering method is composed of pressing the mixture of PLA, CMP, and salt particles at 150 MPa for 3 min followed by heat treatment at 210 degrees C for 30 min. The scaffolds had a homogeneously interconnected porous structure without a skin layer, and they exhibited a narrower pore size distribution and higher mechanical strength in comparison with scaffolds made by a solvent casting method. The scaffolds were seeded by osteoblasts and cultured in vitro or implanted into nude mice subcutaneously for up to 5 weeks. The number of cells attached to and proliferated on the scaffolds at both in vitro and in vivo was in the order of; PLA by novel sintering < PLA/CMP by solvent casting < PLA/CMP by novel sintering. In addition, the alkaline phosphatase activity of and calcium deposition in the scaffolds explanted from mice were enhanced significantly for the scaffolds by novel sintering compared to them by solvent casting. The in vitro results agreed well with the in vivo data. Such a superior characteristic of the novel sintering method should have resulted from the fact that the CMP particles could contact directly with cells/tissues to stimulate the cell proliferation and osteogenic differentiation, while the CMP particles would be coated by polymers and hindered to interact with cells/tissues in the case of a solvent casting method. As the novel sintering method does not use any solvents it offers another advantage to avoid problems associated with solvent residue.

Animals↗

Small-diameter blood vessels engineered with bone marrow-derived cells.

OBJECTIVE: The objective of this study is to investigate if bone marrow-derived cells (BMCs) regenerate vascular tissues and improve patency in tissue-engineered small-diameter (internal diameter = 3 mm) vascular grafts. SUMMARY BACKGROUND DATA: BMCs have demonstrated the ability to differentiate into endothelial-like cells and vascular smooth muscle-like cells and may offer an alternative cell source for vascular tissue engineering. Thus, we tissue-engineered small-diameter vascular grafts with BMCs and decellularized arteries. METHODS: Canine BMCs were differentiated in vitro into smooth muscle alpha-actin/smooth muscle myosin heavy-chain-positive cells and von Willebrand factor/CD31-positive cells and seeded onto decellularized canine carotid arteries (internal diameter = 3 mm). The seeded grafts were implanted in cell donor dogs. The vascular-tissue regeneration and graft patency were investigated with immunohistochemistry and angiography, respectively. RESULTS: The vascular grafts seeded with BMCs remained patent for up to 8 weeks in the canine carotid artery interposition model, whereas nonseeded grafts occluded within 2 weeks. Within 8 weeks after implantation, the vascular grafts showed regeneration of the 3 elements of artery (endothelium, media, and adventitia). BMCs labeled with a fluorescent dye prior to implantation were detected in the retrieved vascular grafts, indicating that the BMCs participated in the vascular tissue regeneration. CONCLUSIONS: Here we show that BMCs have the potential to regenerate vascular tissues and improve patency in tissue-engineered small-diameter vascular grafts. This is the first report of a small-diameter neovessel engineered with BMCs as a cell source.

Animals↗

Synergistic effect of keratinocyte transplantation and epidermal growth factor delivery on epidermal regeneration.

Both keratinocyte transplantation and epidermal growth factor (EGF) delivery stimulate epidermal regeneration. In this study, we hypothesized that the combined therapy of keratinocyte transplantation and EGF delivery accelerates epidermal regeneration compared to the single therapy of either keratinocyte transplantation or EGF delivery. To test this hypothesis, we utilized fibrin matrix as a keratinocyte/EGF delivery vehicle for epidermal regeneration. Full-thickness wounds were created on the dorsum of athymic mice, and human keratinocytes and EGF in fibrin matrix were sprayed onto the wounds to regenerate epidermal layers (group 1). As controls, human keratinocytes in fibrin matrix (group 2), EGF in fibrin matrix (group 3), or fibrin matrix alone (group 4) was sprayed onto the wounds. Spraying keratinocytes suspended in fibrin matrix did not affect the keratinocyte viability, as the cell viabilities before and after spraying were not different. EGF was released from fibrin matrix for 3 days. The wounds were analyzed with histology and immunohistochemistry at 1 and 3 weeks after treatments. Compared with the control groups, initial wound closure rate was highest in group 1. Histological analyses indicated that group 1 exhibited faster and better epidermal regeneration than the other groups. Immunohistochemical analyses showed that regenerated epithelium in groups 1 and 2 stained positively for human involucrin at 3 weeks, whereas the tissue sections of the groups 3 and 4 stained negatively. Human laminin was detected at the dermal-epidermal junction of the regenerated tissues in groups 1 and 2 at 3 weeks and was not detected in groups 3 and 4. The epidermal thickness of the regenerated tissues in group 1 was significantly thicker than that of the other groups at all time points. These results suggest that the combined therapy of keratinocyte transplantation and EGF delivery is more efficacious for epidermal regeneration than each separate therapy alone.

Animals↗

HEK 293 cell suspension culture using fibronectin-adsorbed polymer nanospheres in serum-free medium.

Previously, we reported on suspension culture of anchorage-dependent animal cells using plain polymer nanospheres in serum-containing medium. For commercial cell culture, it is more advantageous to use serum-free medium than serum-containing medium. To culture anchorage-dependent animal cells using polymer nanospheres in serum-free medium, the nanospheres need to be coated with cell adhesion proteins. In this study, we utilized fibronectin-adsorbed polymer nanospheres for suspension culture of anchorage-dependent animal cells in serum-free medium. Fibronectin was adsorbed onto poly(lactic-co-glycolic acid) nanospheres (433 nm in average diameter) by immersing the nanospheres in fetal bovine serum. The nanospheres were used to culture human embryonic kidney (HEK) 293 cells in serum-free medium in stirred suspension bioreactors. Nanospheres attached between HEK 293 cells and promoted cell aggregate formation compared with culture without nanospheres. Most cells in the aggregates were viable over a 10-day culture period. Importantly, the use of poly(lactic-co-glycolic acid) nanospheres promoted the cell growth significantly, compared with culture without nanospheres (3.8- vs 1.8-fold growth). The nanosphere culture method developed in this study removes the time-consuming and costly process of adaptation of anchorage-dependent animal cells to suspension culture in serum-free medium. This culture method may be useful for the large-scale suspension culture of various types of anchorage-dependent animal cells in serum-free medium.

Animals↗

New olivosyl derivatives of methymycin/pikromycin from an engineered strain of Streptomyces venezuelae.

A mutant strain of Streptomyces venezuelae was engineered by deletion of the entire gene cluster related to biosynthesis of the endogenous deoxysugar (TDP-D-desosamine) and replacement with genes required for biosynthesis of an intermediate sugar (TDP-4-keto-6-deoxy-D-glucose) or an exogenous sugar (TDP-D-olivose), from the oleandomycin and urdamycin deoxysugar pathways. The 'sugar-flexible' glycosyltransferase (DesVII) was able to attach the intermediate sugar and the new sugar to both 12- and 14-membered macrolactones thus producing quinovose or olivose glycosylated 10-deoxymethynolide and narbonolide, respectively. In addition, hydroxylated analogs of the new metabolites were detected. These results demonstrate a successful attempt of engineering the deoxysugar pathway for generation of novel hybrid macrolide antibiotics.

Gene Deletion↗

Smooth muscle-like tissues engineered with bone marrow stromal cells.

Bone marrow-derived cells have demonstrated the ability to differentiate into multiple mesenchymal cell lineages. Here we tested whether smooth muscle (SM)-like tissues can be created in vivo with bone marrow stromal cells (BMSCs). Cultured canine BMSCs, which expressed SM cell-specific markers including SM alpha-actin and SM myosin heavy chain, were seeded on three-dimensional, biodegradable polymer scaffolds and implanted into peritoneal cavity of athymic mice. The cell-scaffold constructs retrieved 4 weeks after implantation formed three-dimensional tissues. Immunohistochemical analyses showed that the tissue reconstructs expressed SM alpha-actin and SM myosin heavy chain. Masson's trichrome staining showed the presence of significant amounts of collagen in the tissue reconstructs. Cells labeled with a fluorescent tracer prior to implantation were still present in the tissue reconstructs 4 weeks after implantation. Non-seeded scaffolds (control groups) retrieved 4 weeks after implantation did not exhibit extensive tissue formation. This study demonstrates the potential of BMSCs as an alternative cell source for tissue engineering of SM.

Absorbable Implants↗

The role of erythromycin C-12 hydroxylase, EryK, as a substitute for PikC hydroxylase in pikromycin biosynthesis.

The substrate flexibility of the erythromycin C-12 hydroxylase from Saccharopolyspora erythraea, EryK, was investigated to test its potential for the generation of novel polyketide structures. We have shown that EryK can accept the substrates of PikC from Streptomyces venezuelae which is responsible for the hydroxylation of YC-17 and narbomycin. In a S. venezuelae pikC deletion mutant, EryK could catalyze the hydroxylation of YC-17 and narbomycin to generate methymycin/neomethymycin and pikromycin, respectively. Molecular modeling of the enzyme-substrate complex suggested the possible interaction of EryK with alternative substrates. The results indicate that EryK is flexible toward some alternative polyketides and can be useful for structural diversification of macrolides by post-polyketide synthase hydroxylation.

Bacterial Proteins↗

Enhanced immunodetection of cell-free synthesized erythropoietin under denaturing conditions.

A monoclonal antibody produced by hydridoma cell line, ATCC HB8209, was used to detect and purify erythropoietin synthesized in a cell-free system. The antibody was raised against the N-terminal 20 residues of erythropoietin. It retained anti-erythropoietin activity in 6 M urea in which most of the cell-free synthesized erythropoietin became soluble and gave an enhanced activity of the antibody.

Animals↗

Suspension culture of anchorage-dependent animal cells using nanospheres of the biodegradable polymer, poly(lactic-co-glycolic acid).

A novel method was developed for suspension culture of anchorage-dependent animal cells using biodegradable polymer nanospheres. The addition of poly(lactic-co-glycolic acid) nanospheres (907 nm average diam.) to the culture of human embryonic kidney 293 cells in stirred suspension bioreactors promoted the aggregate formation and cell growth (4.4-fold versus 2.2-fold growth for 7 d), compared to culture without nanospheres. This method may be useful for the culture of various types of anchorage-dependent animal cells in large-scale suspension bioreactors.

Animals↗

Renal tissue reconstitution by the implantation of renal segments on biodegradable polymer scaffolds.

Renal units were created in vivo by transplanting isolated renal segments on three-dimensional, biodegradable polymer scaffolds. Renal segments, freshly isolated from rat kidneys, were seeded on polymer scaffolds and subcutaneously implanted in athymic mice for two and four weeks. Three-dimensional renal reconstructs were formed with glomeruli and tubules, showing a possibility of reconstituting renal structures by transplanting renal segments.

Absorbable Implants↗

A cell-free protein synthesis system as an investigational tool for the translation stop processes.

Using Escherichia coli cell-free protein synthesis system and aminoacylated amber suppressor tRNA, we successfully inserted an unnatural amino acid S-(2-nitrobenzyl)cysteine into human erythropoietin. Three different types of translation stop suppression were observed and each of the three types was easily discerned with SDS-PAGE. Optimal conditions were established for correct stop and programmed suppressions. Since this system differentiates proteins produced by misreading of codons from those produced by programmed suppression, we conclude that this cell-free translation system that we describe in this paper will be of a great use for future investigations on translation stop processes.

Cell-Free System↗