Search PubMed⌕ Search

Biomedical subjects

Cha Yong Choi

Publications and source records attributed to Cha Yong Choi.

At least 19 recordsLinked to original sources

Controlled release of nerve growth factor from fibrin gel.

Nerve growth factor (NGF) is known to promote the axonal regeneration in injured nerve system. Delivery of NGF for a long period in a controlled manner may enhance the regeneration efficacy. In this study, we investigated whether NGF can be released from fibrin gel for a long period in a controlled manner. We also investigated whether sustained delivery of NGF using fibrin gel can enhance the efficacy of NGF in vitro. The addition of heparin to fibrin gel decreased the rate of NGF release from the fibrin gel. As the concentrations of thrombin and fibrinogen in fibrin gel increased, the NGF release rate decreased significantly, and the initial release burst decreased. NGF was released for up to 14 days in vitro. The bioactivity of NGF released from fibrin gel was assessed by morphological changes of pheochromocytoma (PC12) cells cultured in the presence of NGF-containing fibrin gel. NGF released from fibrin gel exhibited significantly higher degrees of PC12 cell viability and differentiation than NGF added in a free form daily into the culture medium. This study demonstrates that fibrin gel can release NGF in a sustained, controlled manner and in a bioactive form.

Animals↗

A poly(lactide-co-glycolide)/hydroxyapatite composite scaffold with enhanced osteoconductivity.

Biodegradable polymer/ceramic scaffolds can overcome the limitations of conventional ceramic bone substitutes. However, the conventional methods of polymer/ceramic scaffold fabrication often use organic solvents, which might be harmful to cells or tissues. Moreover, scaffolds fabricated with the conventional methods have limited ceramic exposure on the scaffold surface since the polymer solution envelopes the ceramic particles during the fabrication process. In this study, we developed a novel fabrication method for the efficient exposure of ceramic onto the scaffold surface, which would enhance the osteoconductivity and wettability of the scaffold. Poly(D,L-lactide-co-glycolide)/nanohydroxyapatite (PLGA/HA) scaffolds were fabricated by the gas foaming and particulate leaching (GF/PL) method without the use of organic solvents. Selective staining of ceramic particles indicated that HA nanoparticles exposed to the scaffold surface were observed more abundantly in the GF/PL scaffold than in the conventional solvent casting and particulate leaching (SC/PL) scaffold. Both types of scaffolds were implanted to critical size defects in rat skulls for 8 weeks. The GF/PL scaffolds exhibited significantly enhanced bone regeneration when compared with the SC/PL scaffolds. Histological analyses and microcomputed tomography of the regenerated tissues showed that bone formation was more extensive on the GF/PL scaffolds than on the SC/PL scaffolds. Compared with the SC/PL scaffolds, the enhanced bone formation on the GF/PL scaffolds may result from the higher exposure of HA nanoparticles to the scaffold surface. These results show that the biodegradable polymer/ceramic composite scaffolds fabricated with the novel GF/PL method can enhance bone regeneration compared with those fabricated with the conventional SC/PL method.

Absorbable Implants↗

A neutralizable epitope is induced on HGF upon its interaction with its receptor cMet.

A new conformational neutralizable epitope is created on heptocyte growth factor (HGF), when it interacts with its receptor, cMet. By immunizing rabbits with HGF-cMet complex, we successfully generated a monoclonal antibody (SFN68) that inhibits HGF-cMet interaction, and blocks the biological function mediated by HGF. To define the epitope, we screened out an epitope-mimicking peptide, KSLSRHDHIHHH, from a phage display of combinatorial peptide library. In molecular mimicry this peptide bound to cMet and inhibited HGF-cMet interaction. No humoral response was induced to this epitope-mimicking peptide when immunization was done with HGF alone.

Animals↗

Functional analysis of desVIII homologues involved in glycosylation of macrolide antibiotics by interspecies complementation.

The DesVIII is an auxiliary protein which enhances the transfer of TDP-d-desosamine catalyzed by DesVII glycosyltransferase in the biosynthesis of macrolide antibiotics, neomethymycin, methymycin and pikromycin, in Streptomyces venezuelae ATCC 15439. Homologues of the desVIII gene are present in a number of aminosugar-containing antibiotic biosynthetic gene clusters including eryCII from the erythromycin producer Saccharopolyspora erythraea, oleP1 from the oleandomycin producer Streptomyces antibioticus, dnrQ from the doxorubicin producer Streptomyces peucetius, and tylMIII from the tylosin producer Streptomyces fradiae. In order to gain further insight into the function of these DesVIII homologues, interspecies complementation experiments were carried out by expressing each gene in a desVIII deletion mutant strain of S. venezuelae. Complementation by expressing EryCII, OleP1, and DnrQ in this mutant strain restored the production of glycosylated macrolides to an approximate level of 66%, 26% and 26%, respectively, compared to self-complementation by DesVIII. However, expression of TylMIII did not restore the antibiotic production. These results suggest that the DesVIII homologues (except for TylMIII) can functionally replace the native DesVIII for glycosylation to proceed in vivo and their functions are similar in acting as glycosyltransferase auxiliary proteins. The requirement of glycosyltransferase auxiliary protein seems to be more widespread in polyketide biosynthetic pathways than previously known.

Anti-Bacterial Agents↗

Tissue engineering of heart valves by recellularization of glutaraldehyde-fixed porcine valves using bone marrow-derived cells.

To increase the biocompatibility and durability of glutaraldehyde (GA)-fixed valves, a biological coating with viable endothelial cells (ECs) has been proposed. However, stable EC layers have not been formed successfully on GA-fixed valves due to their inability to repopulate. In this study, to improve cellular adhesion and proliferation, the GA-fixed prostheses were detoxified by treatment with citric acid to remove free aldehyde groups. Canine bone marrow mononuclear cells (MNCs) were differentiated into EC-like cells and myofibroblast-like cells in vitro. Detoxified prostheses were seeded and recellularized with differentiated bone marrow- derived cells (BMCs) for seven days. Untreated GA-fixed prostheses were used as controls. Cell attachment, proliferation, metabolic activity, and viability were investigated and cell-seeded leaflets were histologically analyzed. On detoxified GA-fixed prostheses, BMC seeding resulted in uninhibited cell proliferation after seven days. In contrast, on untreated GA-fixed prostheses, cell attachment was poor and no viable cells were observed. Positive staining for smooth muscle a-actin, CD31, and proliferating cell nuclear antigen was observed on the luminal side of the detoxified valve leaflets, indicating differentiation and proliferation of the seeded BMCs. These results demonstrate that the treatment of GA-fixed valves with citric acid established a surface more suitable for cellular attachment and proliferation. Engineering heart valves by seeding detoxified GA-fixed biological valve prostheses with BMCs may increase biocompatibility and durability of the prostheses. This method could be utilized as a new approach for the restoration of heart valve structure and function in the treatment of end-stage heart valve disease.

Actins↗

Enhancement of adipose tissue formation by implantation of adipogenic-differentiated preadipocytes.

Engineered adipose tissue could be used for the reconstruction or augmentation of soft tissues lost due to mastectomy or lumpectomy in plastic and reconstructive surgery. Preadipocytes are a feasible cell source for adipose tissue regeneration. However, the enhancement of the in vivo adipogenic conversion of preadipocytes remains a major task. In vitro, the adipogenic differentiation of preadipocytes prior to implantation might enhance the adipose tissue regeneration. In the present study, we investigated whether implantation of adipogenic-differentiated preadipocytes enhances the adipose tissue formation compared with implantation of undifferentiated preadipocytes. We also investigated whether basic fibroblast growth factor (bFGF) further enhances the adipose tissue formation mediated by the implantation of adipogenic-differentiated preadipocytes. A fibrin matrix containing human preadipocytes cultured in adipogenic differentiation-inducing conditions with (group 1) or without (group 2) bFGF was injected into the subcutaneous spaces of athymic mice. Fibrin matrices containing undifferentiated human preadipocytes with (group 3) or without (group 4) bFGF were also implanted. Six weeks after implantation, the implanted cells formed new tissues in all groups. Importantly, the implantation of adipogenic-differentiated preadipocytes resulted in more extensive adipogenesis than the implantation of undifferentiated preadipocytes, as evaluated by adipose tissue area and human adipocyte-specific gene expression in the newly formed tissues. In addition, bFGF enhanced neovascularization in the newly formed tissues and further enhanced the adipogenesis mediated by the adipogenic-differentiated preadipocytes. The present study demonstrates that the implantation of adipogenic-differentiated preadipocytes enhances adipose tissue regeneration, as compared with the implantation of undifferentiated preadipocytes, and that cell transplantation-mediated adipogenesis can be further enhanced by the delivery of bFGF.

Adipocytes↗

Heterologous expression of tylosin polyketide synthase and production of a hybrid bioactive macrolide in Streptomyces venezuelae.

Tylosin polyketide synthase (Tyl PKS) was heterologously expressed in an engineered strain of Streptomyces venezuelae bearing a deletion of pikromycin PKS gene cluster using two compatible low-copy plasmids, each under the control of a pikAI promoter. The mutant strain produced 0.5 mg/l of the 16-membered ring macrolactone, tylactone, after a 4-day culture, which is a considerably reduced culture period to reach the maximum production level compared to other Streptomyces hosts. To improve the production level of tylactone, several precursors for ethylmalonyl-CoA were fed to the growing medium, leading to a 2.8-fold improvement (1.4 mg/ml); however, switching the pikAI promoter to an actI promoter had no observable effect. In addition, a small amount of desosamine-glycosylated tylactone was detected from the extract of the mutant strain, revealing that the native glycosyltransferase DesVII displayed relaxed substrate specificity in accepting the 16-membered ring macrolactone to produce the glycosylated tylactone. These results demonstrate a successful attempt for a heterologous expression of Tyl PKS in S. venezuelae and introduce S. venezuelae as a rapid heterologous expression system for the production of secondary metabolites.

Anti-Bacterial Agents↗

Development and mathematical modeling of a two-stage reactor system for trichloroethylene degradation using Methylosinus trichosporium OB3b.

A two-stage reactor system was developed for the continuous degradation of gas-phase trichloroethylene (TCE). Methylosinus trichosporium OB3b was immobilized on activated carbon in a TCE degradation reactor, trickling biofilter (TBF). The TBF was coupled with a continuous stirred tank reactor (CSTR) to allow recirculation of microbial cells from/to the TBF for the reactivation of inactivated cells during TCE degradation. The mass transfer aspect of the TBF was analyzed, and mass transfer coefficient of 3.9 h(-1) was estimated. The loss of soluble methane monooxygenase (sMMO) activity was modeled based on a material balance on the CSTR and TBF, and transformation capacity (T (c)) was determined to be 20.2 micromol mg(-1). Maximum TCE degradation rate of 525 mg 1(-1) d(-1) was obtained and reactor has been stably operated for more than 270 days.

Bioreactors↗

A precise mRNA quantification method using CE-based SSCP.

Even though mRNA quantification provides significant information for biological analysis, current methods such as Northern blot analysis and real-time PCR are known to be laborious and lacking in precision. In this study, we demonstrate a new precise mRNA quantification method using CE based on SSCP (CE-SSCP) coupled with reverse transcription. mRNA samples could be simply analyzed for the quantification directly with reverse transcript obtained from a single reaction. This helps to avoid considerable errors generated by a series of the tedious manual steps. Also, unlike real-time PCR, reverse transcripts can be directly quantified by CE-SSCP in this method without further data estimation. Reproducibility and accuracy of CE-SSCP for mRNA quantification was examined using enhanced green fluorescent protein (eGFP) mRNA transcribed in vitro. Specific reverse transcription primer was determined for the accurate quantification of eGFP mRNA from total RNA obtained from the recombinant Escherichia coli. Using elongation factor Tu mRNA as an internal standard, it was shown that sample-to-sample variation could be minimized. Expression kinetics at both mRNA level and protein level was studied and the potential of CE-SSCP in expression analysis was demonstrated by comparison with the eGFP activity assay.

Electrophoresis, Capillary↗

Enhancement of in vivo endothelialization of tissue-engineered vascular grafts by granulocyte colony-stimulating factor.

Successful reconstruction of large-diameter blood vessel in humans has been demonstrated using the tissue engineering technique, but improvement in patency of small-diameter bioartificial vascular graft remains a great challenge. This study reports that granulocyte colony-stimulating factor (G-CSF) can enhance in vivo endothelialization of tissue-engineered vascular grafts, which could be used to improve patency of small-diameter vascular graft. Vascular grafts were tissue engineered with decellularized canine abdominal aortas and canine autologous bone marrow-derived cells. Prior to cell seeding onto decellularized graft matrices, bone marrow-derived cells were induced to differentiate into endothelial cells and smooth muscle cells. The cell-seeded vascular grafts were implanted into the abdominal aortas of bone marrow donor dogs. Before and after graft implantation, G-CSF was administered subcutaneously to the dogs (n = 3). The grafts implanted into the dogs not receiving G-CSF were used as controls (n = 3). Eight weeks after implantation, grafts in both groups showed regeneration of vascular tissues including endothelium and smooth muscle. Importantly, endothelium formation was more extensive in the G-CSF-treated grafts than in the control grafts, as assessed with reverse transcription polymerase chain reaction, western blot, and immunohistochemistry. In addition, intimal hyperplasia was significantly reduced in the G-CSF-treated grafts compared to the control grafts. This study suggests that G-CSF administration could be applied to improve patency of small-diameter tissue-engineered vascular grafts.

Animals↗

A method for the effective formation of hepatocyte spheroids using a biodegradable polymer nanosphere.

Cultures of hepatocytes in spheroid form are known to maintain higher cell viability and exhibit better hepatocyte functions than those in monolayer cultures. In this study, a method for the formation of hepatocyte spheroids was developed using biodegradable polymer nanospheres. The addition of poly(lactic-co-glycolic acid) nanospheres to hepatocyte cultures in spinner flasks increased the efficiency of hepatocyte spheroid formation (the number of cells in spheroids divided by the total cell number) as compared with hepatocyte cultures without nanospheres (control). The viability and mitochondrial activity of the hepatocyte spheroids in the nanosphere-added cultures were significantly higher than those in the control. In addition, the mRNA expression levels of albumin and phenylalanine hydroxylase, both of which are hepatocyte-specific proteins, were significantly higher in the nanosphere-added cultures than in the control. This new culture method improves upon the conventional method of forming hepatocyte spheroids in terms of spheroid formation efficiency, cell viability, and hepatocyte function.

Absorbable Implants↗

Enhancement of the osteogenic efficacy of osteoblast transplantation by the sustained delivery of basic fibroblast growth factor.

Previously, the sustained delivery of basic fibroblast growth factor (bFGF) has been demonstrated to promote bone regeneration in bone defects that had not been treated with osteogenic cell transplantation. In this study, we tested the hypothesis that the sustained delivery of bFGF could enhance osteoblast transplantation-mediated ectopic bone formation. Rat osteoblasts and bFGF were mixed with an injectable fibrin matrix and subcutaneously transplanted to rats (cell + bFGF group). The fibrin matrix played roles in both the cell transplantation matrix and the bFGF sustained delivery matrix. The transplantation of osteoblasts suspended in a fibrin matrix without bFGF served as a control. Twelve weeks after transplantation, histological analyses of retrieved transplants showed that new bone formation was more abundant and mature in the cell + bFGF group than in the control group. The bone formation area and the calcium content in the cell + bFGF group were two- and nine-fold higher, respectively, than those in the control group. Enhanced bone formation by the sustained delivery of bFGF may be attributed to the enhanced osteogenic gene expression of the transplanted cells and neovascularization of the transplants, as both mRNA expression of various osteogenic markers and arteriole density in the cell + bFGF group were significantly higher than those in the control group. This study demonstrates that the sustained delivery of bFGF can potentiate ectopic bone regeneration by osteoblast transplantation. This combination therapy may have effective implications for bone regeneration in large bone defects in which extensive osteogenic cell migration and angiogenesis are required.

Animals↗

Preliminary experience with tissue engineering of a venous vascular patch by using bone marrow-derived cells and a hybrid biodegradable polymer scaffold.

OBJECTIVE: Currently available synthetic polymer vascular patches used in cardiovascular surgery have shown serious shortcomings, including thrombosis, calcification, infection, and lack of growth potential. These problems may be avoided by vascular patches tissue-engineered with autologous stem cells and biodegradable polymeric materials. The objective of this study was to develop a tissue-engineered vascular patch by using autologous bone marrow-derived cells (BMCs) and a hybrid biodegradable polymer scaffold. METHODS: Hybrid biodegradable polymer scaffolds were fabricated from poly(lactide-co-epsilon-caprolactone) (PLCL) copolymer reinforced with poly(glycolic acid) (PGA) fibers. Canine bone marrow mononuclear cells were induced in vitro to differentiate into vascular smooth muscle cells and endothelial cells. Tissue-engineered vascular patches (15 mm wide x 30 mm long) were fabricated by seeding vascular cells onto PGA/PLCL scaffolds and implanted into the inferior vena cava of bone marrow donor dogs. RESULTS: Compared with PLCL scaffolds, PGA/PLCL scaffolds exhibited tensile mechanical properties more similar to those of dog inferior vena cava. Eight weeks after implantation of vascular patches tissue-engineered with BMCs and PGA/PLCL scaffolds, the vascular patches remained patent with no sign of thrombosis, stenosis, or dilatation. Histological, immunohistochemical, and scanning electron microscopic analyses of the retrieved vascular patches revealed regeneration of endothelium and smooth muscle, as well as the presence of collagen. Calcium deposition on tissue-engineered vascular patches was not significantly different from that on native blood vessels. Immunofluorescent double staining confirmed that implanted BMCs survived after implantation and contributed to regeneration of endothelium and vascular smooth muscle in the implanted vascular patches. CONCLUSIONS: This study demonstrates that vascular patches can be tissue-engineered with autologous BMCs and hybrid biodegradable polymer scaffolds.

Absorbable Implants↗

Neopikromycin and novapikromycin from the pikromycin biosynthetic pathway of Streptomyces venezuelae.

Two new macrolides from the pikromycin biosynthetic pathway of Streptomyces venezuelae, neopikromycin (9) and novapikromycin (10), were identified and structurally characterized through mass spectrometry and NMR spectroscopy. The established structures showed that 9 and 10 have hydroxyl groups at C-14 (9) and at both C-12 and C-14 (10), on the basis of a comparison with narbomycin (7). The purified PikC cytochrome P450 monooxygenase catalyzes the in vitro hydroxylation of 7 and pikromycin (8) to yield 9 and 10, respectively, thus expanding the substrate- and regio-flexibility of this enzyme.

Anti-Bacterial Agents↗

Enhancement of angiogenic efficacy of human cord blood cell transplantation.

We tested the hypotheses that angiogenic efficacy of cord blood mononuclear cell (CBMNC) transplantation would be enhanced by using matrix and that combined therapy of CBMNC transplantation using matrix and sustained delivery of basic fibroblast growth factor (bFGF) would be synergistic in angiogenesis induction in ischemic limbs. One day after surgical induction of hindlimb ischemia, C57BL/6J mice were randomized to receive either medium injection, CBMNC transplantation using medium, CBMNC transplantation using fibrin matrix, sustained delivery of bFGF, or a combination of sustained delivery of bFGF and CBMNC transplantation using fibrin matrix. Four weeks after treatment, the angiogenic efficacy of the treatments was evaluated by immunohistochemical examinations and microvessel density determination in the ischemic sites. Transplanted CBMNCs survived, proliferated, and participated in capillary formation in ischemic limbs. CBMNC transplantation using fibrin matrix significantly increased the densities of capillaries and arterioles compared with CBMNC transplantation using medium. Importantly, combined therapy of sustained delivery of bFGF and CBMNC transplantation using fibrin matrix further increased the densities of capillaries and arterioles compared with either therapy alone. The angiogenic efficacy of angiogenic cell transplantation is enhanced by cell transplantation using matrix. Combined therapy of sustained release of angiogenic protein and angiogenic cell transplantation synergistically enhances angiogenesis in ischemic limbs compared to each therapy separately.

Animals↗

Tissue engineering of heart valves in vivo using bone marrow-derived cells.

In this study, we tissue-engineered heart valves in vivo using autologous bone marrow-derived cells (BMCs). Canine BMCs were differentiated into endothelial cell (EC)-like cells and myofibroblast (MF)-like cells. Decellularized porcine pulmonary valves were seeded with BMCs and implanted to abdominal aorta and pulmonary valve of bone marrow donor dogs. Histological examination of the explants identified the regeneration of valvular structures expressing CD31 and smooth muscle alpha-actin, indicating the presence of EC-like and MF-like cells in the grafts at 3 and 1 week, respectively, after implantation. Fluorescent microscopic examinations identified the presence of fluorescently labeled cells in the explants, indicating that the implanted BMCs survived and participated in the heart valve reconstitution. This study reports, for the first time, on tissue engineering of heart valve in vivo using BMCs.

Animals↗

Granulocyte colony-stimulating factor treatment enhances the efficacy of cellular cardiomyoplasty with transplantation of embryonic stem cell-derived cardiomyocytes in infarcted myocardium.

We tested the hypothesis that granulocyte colony-stimulating factor (G-CSF) administration would enhance the efficacy of cellular cardiomyoplasty with embryonic stem (ES) cell-derived cardiomyocytes in infarcted myocardium. Three weeks after myocardial infarction by cryoinjury, Sprague-Dawley rats were randomized to receive either an injection of medium, ES cell-derived cardiomyocyte transplantation, G-CSF administration, or a combination of G-CSF administration and ES cell-derived cardiomyocyte transplantation. Eight weeks after treatment, the cardiac tissue formation, neovascularization, and apoptotic activity in the infarct regions were evaluated by histology and immunohistochemistry. The left ventricular (LV) dimensions and function of the treated heart were evaluated by echocardiography. Transplanted ES cell-derived cardiomyocytes survived and participated in the myocardial regeneration in the infarcted heart. A combination of G-CSF treatment and ES cell-derived cardiomyocyte transplantation significantly promoted angiogenesis and reduced the infarct area and cell apoptosis in the infarcted myocardium compared with ES cell-derived cardiomyocyte transplantation alone. The combination therapy also attenuated LV dilation, as compared with ES cell-derived cardiomyocyte transplantation alone. G-CSF treatment can enhance the efficacy of cellular cardiomyoplasty by ES cell-derived cardiomyocyte transplantation to treat myocardial infarction.

Animals↗

Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering.

Biodegradable polymer/bioceramic composite scaffolds can overcome the limitations of conventional ceramic bone substitutes such as brittleness and difficulty in shaping. However, conventional methods for fabricating polymer/bioceramic composite scaffolds often use organic solvents (e.g., the solvent casting and particulate leaching (SC/PL) method), which might be harmful to cells or tissues. Furthermore, the polymer solutions may coat the ceramics and hinder their exposure to the scaffold surface, which may decrease the likelihood that the seeded osteogenic cells will make contact with the bioactive ceramics. In this study, a novel method for fabricating a polymer/nano-bioceramic composite scaffold with high exposure of the bioceramics to the scaffold surface was developed for efficient bone tissue engineering. Poly(D,L-lactic-co-glycolic acid)/nano-hydroxyapatite (PLGA/HA) composite scaffolds were fabricated by the gas forming and particulate leaching (GF/PL) method without the use of organic solvents. The GF/PL method exposed HA nanoparticles at the scaffold surface significantly more than the conventional SC/PL method does. The GF/PL scaffolds showed interconnected porous structures without a skin layer and exhibited superior enhanced mechanical properties to those of scaffolds fabricated by the SC/PL method. Both types of scaffolds were seeded with rat calvarial osteoblasts and cultured in vitro or were subcutaneously implanted into athymic mice for eight weeks. The GF/PL scaffolds exhibited significantly higher cell growth, alkaline phosphatase activity, and mineralization compared to the SC/PL scaffolds in vitro. Histological analyses and calcium content quantification of the regenerated tissues five and eight weeks after implantation showed that bone formation was more extensive on the GF/PL scaffolds than on the SC/PL scaffolds. Compared to the SC/PL scaffolds, the enhanced bone formation on the GF/PL scaffolds may have resulted from the higher exposure of HA nanoparticles at the scaffold surface, which allowed for direct contact with the transplanted cells and stimulated the cell proliferation and osteogenic differentiation. These results show that the biodegradable polymer/bioceramic composite scaffolds fabricated by the novel GF/PL method enhance bone regeneration compared with those fabricated by the conventional SC/PL method.

Alkaline Phosphatase↗