Search PubMed⌕ Search

Biomedical subjects

C T Wittwer

Publications and source records attributed to C T Wittwer.

At least 19 recordsLinked to original sources
PubMed2004

High-resolution DNA melting curve analysis to establish HLA genotypic identity.

High-resolution melting curve analysis is a closed-tube fluorescent technique that can be used for genotyping and heteroduplex detection after polymerase chain reaction. We applied this technique at the HLA-A locus and suggest that this method can be used as a rapid, inexpensive screen between siblings prior to living-related transplantation. At any locus, there are seven general cases of shared alleles among two individuals, ranging from identical homozygous genotypes (all alleles shared) to two heterozygous genotypes that share no alleles. We studied each case using previously typed cell lines to show that identity or non-identity can be determined in all cases by high-resolution melting curve analysis. HLA genotype identity is suggested when two individuals have the same melting curves. Identity is confirmed by comparing the melting curve of a 1:1 mixture with the individual melting curves. Non-identity at the amplified locus changes the heteroduplexes formed in the mixture compared with the original samples and alters the shape of the melting curve. The technique was tested on DNA from a 17-member CEPH family. High-resolution melting curve analysis revealed six different genotypes in the family. The genotype clustering was confirmed by sequence-based typing. Although this technique does not sequence or determine specific HLA alleles, it does rapidly establish identity at highly polymorphic HLA loci. The technique may also prove useful for confirmation of HLA genotypic identity between unrelated individuals prior to allogeneic hematopoietic stem-cell transplantation.

Base Sequence↗
PubMed2001

Fluorescein-labeled oligonucleotides for real-time pcr: using the inherent quenching of deoxyguanosine nucleotides.

Fluorescein-labeled oligonucleotide probes can be used to continuously monitor the polymerase chain reaction. Depending on the sequence, the fluorescence intensity of the probe is either increased or decreased by hybridization. The greatest effect is probe quenching by hybridization to amplicons containing deoxyguanosine nucleotides (Gs), giving a sequence-specific decrease in fluorescence as product accumulates. Quenching of the probes by Gs is position dependent. A 25% decrease in fluorescence of 5'-labeled probes was observed with a G at the first position of the 3'-dangling end. Additional Gs can increase quenching to about 40%. This change in fluorescence with hybridization allows real-time quantification and mutation detection with a simple single labeled probe. Quantification of the initial template copy number is possible by monitoring fluorescence at each cycle at a constant temperature. Mutation detection by Tm estimates from melting curve analysis for factor V Leiden, hemoglobin C, hemoglobin S, the thermolabile mutation of methylenetetrahydrofolate reductase, and the cystic fibrosis-associated deletion F508del is demonstrated. By using the inherent quenching of deoxyguanosine nucleotides in the amplicon, complicated probe designs involving internal quenching can be avoided.

DNA Mutational Analysis↗
PubMed2001

Real-time multiplex PCR assays.

The ability to multiplex PCR by probe color and melting temperature (T(m)) greatly expands the power of real-time analysis. Simple hybridization probes with only a single fluorescent dye can be used for quantification and allele typing. Different probes are labeled with dyes that have unique emission spectra. Spectral data are collected with discrete optics or dispersed onto an array for detection. Spectral overlap between dyes is corrected by using pure dye spectra to deconvolute the experimental data by matrix algebra. Since fluorescence is temperature dependent and depends on the dye, spectral overlap and color compensation constants are also temperature dependent. Single-labeled probes are easier to synthesize and purify than more complex probes with two or more dyes. In addition, the fluorescence of single-labeled probes is reversible and depends only on hybridization of the probe to the target, allowing study of the melting characteristics of the probe. Although melting curves can be obtained during PCR, data are usually acquired at near-equilibrium rates of 0.05-0.2 degrees C/s after PCR is complete. Using rapid-cycle PCR, amplification requires about 20 min followed by a 10-min melting curve, greatly reducing result turnaround time. In addition to dye color, melting temperature can be used for a second dimension of multiplexing. Multiplexing by color and T(m) creates a "virtual" two-dimensional multiplexing array without the need for an immobilized matrix of probes. Instead of physical separation along the X and Y axes, amplification products are identified by different fluorescence spectra and melting characteristics.

Animals↗
PubMed2001

Quantification of HER2/neu gene amplification by competitive pcr using fluorescent melting curve analysis.

BACKGROUND: Molecular detection methods for HER2/neu gene amplification include fluorescence in situ hybridization (FISH) and competitive PCR. We designed a quantitative PCR system utilizing fluorescent hybridization probes and a competitor that differed from the HER2/neu sequence by a single base change. METHODS: Increasing twofold concentrations of competitor were coamplified with DNA from cell lines with various HER2/neu copy numbers at the HER2/neu locus. Competitor DNA was distinguished from the HER2/neu sequence by a fluorescent hybridization probe and melting curve analysis on a fluorescence-monitoring thermal cycler. The percentages of competitor to target peak areas on derivative fluorescence vs temperature curves were used to calculate copy number. RESULTS: Real-time monitoring of the PCR reaction showed comparable relative areas throughout the log phase and during the PCR plateau, indicating that only end-point detection is necessary. The dynamic range was over two logs (2000-250 000 competitor copies) with CVs < 20%. Three cell lines (MRC-5, T-47D, and SK-BR-3) were determined to have gene doses of 1, 3, and 11, respectively. Gene amplification was detected in 3 of 13 tumor samples and was correlated with conventional real-time PCR and FISH analysis. CONCLUSION: Use of relative peak areas allows gene copy numbers to be quantified against an internal competitive control in < 1 h.

DNA↗
PubMed2001

Oligonucleotide melting temperatures under PCR conditions: nearest-neighbor corrections for Mg(2+), deoxynucleotide triphosphate, and dimethyl sulfoxide concentrations with comparison to alternative empirical formulas.

BACKGROUND: Many techniques in molecular biology depend on the oligonucleotide melting temperature (T(m)), and several formulas have been developed to estimate T(m). Nearest-neighbor (N-N) models provide the highest accuracy for T(m) prediction, but it is not clear how to adjust these models for the effects of reagents commonly used in PCR, such as Mg(2+), deoxynucleotide triphosphates (dNTPs), and dimethyl sulfoxide (DMSO). METHODS: The experimental T(m)s of 475 matched or mismatched target/probe duplexes were obtained in our laboratories or were compiled from the literature based on studies using the same real-time PCR platform. This data set was used to evaluate the contributions of [Mg(2+)], [dNTPs], and [DMSO] in N-N calculations. In addition, best-fit coefficients for common empirical formulas based on GC content, length, and the equivalent sodium ion concentration of cations [Na(+)(eq)] were obtained by multiple regression. RESULTS: When we used [Na(+)(eq)] = [Monovalent cations] + 120(square root of ([Mg2+]-[dNTPs])) (the concentrations in this formula are mmol/L) to correct DeltaS(0) and a DMSO term of 0.75 degrees C (%DMSO), the SE of the N-N T(m) estimate was 1.76 degrees C for perfectly matched duplexes (n = 217). Alternatively, the empirical formula T(m) ( degrees C) = 77.1 degrees C + 11.7 x log[Na(+)(eq)] + 0.41(%GC) - 528/bp - 0.75 degrees C(%DMSO) gave a slightly higher SE of 1.87 degrees C. When all duplexes (matched and mismatched; n = 475) were included in N-N calculations, the SE was 2.06 degrees C. CONCLUSIONS: This robust model, accounting for the effects of Mg(2+), DMSO, and dNTPs on oligonucleotide T(m) in PCR, gives reliable T(m) predictions using thermodynamic N-N calculations or empirical formulas.

Cations, Divalent↗
PubMed2000

Monitoring hybridization during polymerase chain reaction.

The polymerase chain reaction (PCR) is usually analyzed by gel electrophoresis for size separation of PCR products. Additional separation techniques, such as single-stranded conformational polymorphism (SSCP), denaturing gradient gel electrophoresis (DGGE), temperature gradient gel electrophoresis (TGGE) and denaturing high-performance liquid chromatography (DHPLC), can also be used to scan for sequence alterations. These techniques are all based on the effect of PCR product hybridization on mobility. Hybridization can also be monitored with fluorescence during PCR without chromatographic or electrophoretic separation. Continuous monitoring of PCR allows the detection, quantification and sequence specificity of PCR products to be assessed, often without any need for further analysis. In such a closed system, PCR quantification with sensitivity to the single copy level can be achieved using either double-stranded DNA binding dyes or fluorescently labeled allele-specific oligonucleotide (ASO) probes. Melting curve analysis with ASO probes can be used to genotype various alleles, including single base alterations. The integration of rapid cycle PCR and ASO probes in an automated system greatly facilitates research and clinical applications of nucleic acid analysis in genetics, oncology, and infectious disease.

Nucleic Acid Hybridization↗
PubMed2000

Comparison of automated short tandem repeat and manual variable number of tandem repeat analysis of chimerism in bone marrow transplant patients.

Hematopoietic chimerism can be monitored in bone marrow transplant patients at DNA polymorphic sites. In this study, allele detection and quantification by ethidium bromide-stained agarose gels were compared with automated fluorescent sizing on an artificially mixed system and on chimeric post-transplant whole blood and sorted cell populations. A panel of five variable number of tandem repeats (VNTRs) were amplified and quantified visually on an ethidium bromide-stained gel. The ten short tandem repeats (STRs) were amplified as a multiplex polymerase chain reaction (PCR) and fluorescently detected on a DNA sequencer. Fluorescent band intensities were converted to fluorescent peak areas for allele quantification. Using mixed DNA of different proportions, both STRs and VNTRs showed linearity and appeared equally sensitive. However, case studies showed STRs to be more sensitive (<5%) than VNTRs (<10%). The STRs more accurately quantified the minor DNA component at low concentrations.

Alleles↗
PubMed2000

PCR amplification using electrolytic resistance for heating and temperature monitoring.

An alternative method of rapid-cycle PCR for DNA amplification is demonstrated using electrolyte resistance for heating and temperature monitoring. The PCR amplification solution is electrically conductive and can be heated by passing an alternating current through the sample. The temperature of the solution is evaluated by monitoring its electrical resistance. Cooling is accomplished by forced air convection at ambient temperature. Heating and cooling rates of up to 20 degrees C/s were achieved. The 35 cycles of PCR were completed in less than 12 min with product yields equivalent to conventional temperature cycling. Electrolyte resistance provides a method for both direct heating and monitoring the temperature of PCR samples.

Calibration↗
PubMed1999

Color multiplexing hybridization probes using the apolipoprotein E locus as a model system for genotyping.

Fluorescent hybridization probes were multiplexed for color genotyping of the apolipoprotein E locus using model oligonucleotide targets. Fluorescence resonance energy transfer was observed during adjacent hybridization of 3'-fluorescein-labeled "donor" probes paired with 5'-labeled "acceptor" probes with different emission spectra reporting at codons 112 and 158. The acceptor dyes emitted at either 640 nm (LightCycler Red 640) or 705 nm (LightCycler Red 705) and were monitored with a LightCycler, a thermal cycler with an integrated fluorimeter. The color of the acceptor dye identified each site and the characteristic melting temperatures of the fluorescein-labeled probes identified single base changes within each codon. Color compensation of temperature-dependent spectral overlap was applied to completely separate each channel. Competition between the probes and the complementary strand for the target sequence decreased resonance energy transfer, indicating an advantage of single-stranded target. Hybridization probes of the same length, but different GC content are T(m) shifted by the same amount during A:C mismatch duplex melting. Genotyping was optimal at both sites if melting curve analysis was preceded by a slow (1 degrees C/s) annealing phase. Although each site preferred different concentrations of Mg(2+) and target strand for optimal genotyping, conditions for multiplexing were found. This method, along with an appropriate amplification technique, should allow real-time multiplex genotyping from genomic DNA.

Apolipoproteins E↗
PubMed1999

Rapid simultaneous amplification and detection of the MBR/JH chromosomal translocation by fluorescence melting curve analysis.

Polymerase chain reaction (PCR) amplification and product analysis for the detection of chromosomal translocations, such as the t(14;18), has traditionally been a two-step process. PCR product detection has generally entailed gel electrophoresis and/or hybridization or sequencing for confirmation of assay specificity. Using a microvolume fluorimeter integrated with a thermal cycler and a PCR-compatible double-stranded DNA (dsDNA) binding fluorescent dye (SYBR Green I), we investigated the feasibility of simultaneous thermal amplification and detection of MBR/JH translocation products by fluorescence melting curve analysis. We analyzed DNA from 30 cases of lymphoproliferative disorders comprising 19 cases of previously documented MBR/JH-positive follicle center lymphoma and 11 reactive lymphadenopathies. The samples were coded and analyzed blindly for the presence of MBR/JH translocations by fluorescence melting curve analysis. We also performed dilutional assays using the MBR/JH-positive cell line SUDHL-6. Multiplex PCR for MBR/JH and beta-globin was used to simultaneously assess sample adequacy. All (100%) of the 19 cases previously determined to be MBR/JH positive by conventional PCR analysis showed a characteristic sharp decrease in fluorescence at approximately 90 degrees C by melting curve analysis after amplification. Fluorescence melting peaks obtained by plotting the negative derivative of fluorescence over temperature (-dF/dT) versus temperature (T) showed melting temperatures (Tm) at 88.85+/-1.15 degrees C. In addition, multiplex assays using both MBR/JH and beta-globin primers yielded easily distinguishable fluorescence melting peaks at approximately 90 degrees C and 81.2 degrees C, respectively. Dilutional assays revealed that fluorescence melting curve analysis was more sensitive than conventional PCR and agarose gel electrophoresis with ultraviolet transillumination by as much as 100-fold. Simultaneous amplification and fluorescence melting curve analysis is a simple, reliable, and sensitive method for the detection of MBR/JH translocations. The feasibility of specific PCR product detection without electrophoresis or utilization of expensive fluorescently labeled probes makes this method attractive for routine molecular diagnostics.

Chromosome Mapping↗
PubMed1999

Rapid F508del and F508C assay using fluorescent hybridization probes.

Amplification and fluorescent genotyping of the cystic fibrosis F508del locus was achieved from human genomic DNA in less than 30 min. The hybridization of adjacent fluorescent probes at the mutation site was monitored by resonance energy transfer between fluorescein and Cy5 during heating or cooling. Characteristic curves were obtained for each genotype; the first derivative of these fluorescent curves has a maximum at an apparent hybridization temperature (Tm) that is specific for each probe/allele duplex. The direction and rate of temperature change determines the difference between the apparent Tm and the true equilibrium Tm. One hundred and five sample were genotyped for the F508del cystic fibrosis mutation by heating and cooling curve profiles. These genotypes were validated by allele-specific amplification. Two fluorescein hybridization probes were designed to match the wild-type sequence perfectly from either codons 502 to 513 or from 504 to 511 on the cystic fibrosis transconductance regulator gene of chromosome 7. While genotyping for the F508del, an allele with the F508C base change was detected. For both F508del and F508C variants, the Tm shift from wild type was greater with a 24-mer probe than with a 35-mer probe. Fluorescent monitoring of hybridization probes is a versatile technique that can detect unexpected sequence alterations.

Alleles↗
PubMed1999

A rapid practical RT-PCR-based approach for the detection of the PML/RAR alpha fusion transcript in acute promyelocytic leukemia.

The t(15;17) and its molecular equivalent, PML/RAR alpha gene fusion, is strongly associated with acute promyelocytic leukemia (APL). Since treatment response to all-trans retinoic acid correlates directly with PML/RAR alpha, expeditious documentation is critical to patient care. We have designed an extremely rapid, practical, polymerase chain reaction (PCR)-based method using a rapid air thermal cycler to detect type A, B, and B-variant fusion patterns of PML/RAR alpha. We examined 15 cases of APL and 13 cases of leukemias other than APL with a nested reverse-transcription PCR assay. Three APL samples were type A, 11 were type B, and 1 was a B variant based on gel band patterns. PCR products exhibited positive probe hybridization signals and had sequences containing type A, B, or B-variant fusion patterns. PCR amplification of PML/RAR alpha was complete in 22 minutes, and the entire test required 4 1/2 hours. This method permits exceptional turnaround time and is an alternative to cytogenetics and slower PCR assays.

Artificial Gene Fusion↗
PubMed1999

Fluorescence melting curve analysis for the detection of the bcl-1/JH translocation in mantle cell lymphoma.

PCR amplification and product analysis for the detection of chromosomal translocations such as bcl-1/JH have traditionally been performed as a two-step process with separate amplification and product detection. PCR product detection has generally entailed gel electrophoresis, hybridization, or sequencing for confirmation of assay specificity. By using a microvolume fluorimeter integrated with a thermal cycler and the PCR compatible double-stranded DNA (dsDNA) binding dye SYBR Green I, we simultaneously amplified and detected bcl-1/JH translocation products by using rapid cycle PCR and fluorescence melting curve analysis. We analyzed DNA from 25 cases of lymphoproliferative disorders comprising 12 previously documented bcl-1/JH-positive mantle cell lymphomas, and 13 reactive lymphadenopathies. The samples were coded and analyzed in a blind manner for the presence of bcl-1/JH translocations by fluorescence melting curve analysis. The results of fluorescence analysis were compared with those of conventional PCR and gel electrophoresis. All of the 12 cases (100%) previously determined to be bcl-1/JH positive by conventional PCR analysis showed a characteristic sharp decrease in fluorescence at about 86 degrees C by melting curve analysis. For easier visualization of melting temperatures (Tm), fluorescence melting peaks were obtained by plotting the negative derivative of fluorescence over temperature (-dF/dT) versus temperature (T). Dilutional assays revealed that fluorescence melting curve analysis was more sensitive than conventional PCR and agarose gel electrophoresis with ultraviolet transillumination by as much as 40-fold. Our results indicate that nucleic acid amplification integrated with fluorescence melting curve analysis is a simple, reliable, sensitive, and rapid method for the detection of bcl-1/JH translocations. The feasibility of specific PCR product detection without electrophoresis or expensive fluorescently labeled probes makes this methodology attractive for studies in molecular pathology.

Cyclin D1↗
PubMed1998

Integrated amplification and detection of the C677T point mutation in the methylenetetrahydrofolate reductase gene by fluorescence resonance energy transfer and probe melting curves.

A microvolume fluorimeter integrated with a rapid thermal cycler allows both amplification and point mutation detection from genomic DNA in approximately 30 min. This homogeneous method combines rapid cycle DNA amplification with allele-specific fluorescent probe melting profiles for product genotyping. The amplification reaction includes a primer internally labeled with Cy5 and a 3'-fluorescein-labeled probe that spans the region of interest. During asymmetric amplification, the probe hybridizes to excess Cy5-labeled strand and is observed as fluorescence resonance energy transfer. Resonance energy transfer increases each cycle as product accumulates during amplification. When fluorescence is monitored as the temperature increases through the Tm of the probe/product duplex, a characteristic melting profile for each genotype is obtained. Fluorescence genotyping of the common C677T base substitution in the methylenetetrahydrofolate reductase gene in 110 DNA samples correlated perfectly with genotyping by restriction enzyme digestion and gel electrophoresis. The relatively stable G:T mismatch of this example gave a 3 degrees C difference in Tm from complete Watson-Crick pairing, suggesting that this homogeneous fluorescence method can be used for all single-base mismatches.

Alleles↗
PubMed1998

Homogeneous multiplex genotyping of hemochromatosis mutations with fluorescent hybridization probes.

Multiplex polymerase chain reaction amplification and genotyping by fluorescent probe melting temperature (Tm) was used to simultaneously detect multiple variants in the hereditary hemochromatosis gene. Homogenous real-time analysis by fluorescent melting curves has previously been used to genotype single base mismatches; however, the current method introduces a new probe design for fluorescence resonance energy transfer and demonstrates allele multiplexing by Tm for the first time. The new probe design uses a 3'-fluorescein-labeled probe and a 5'-Cy5-labeled probe that are in fluorescence energy transfer when hybridized to the same strand internal to an unlabeled primer set. Two hundred and fifty samples were genotyped for the C282Y and H63D hemochromatosis causing mutations by fluorescent melting curves. Multiplexing was performed by including two primer sets and two probe sets in a single tube. In clinically defined groups of 117 patients and 56 controls, the C282Y mutation was found in 87% (204/234) of patient chromosomes, and the relative penetrance of the H63D mutation was 2.4% of the homozygous C282Y mutation. Results were confirmed by restriction enzyme digestion and agarose gel electrophoresis. In addition, the probe covering the H63D mutation unexpectedly identified the A193T polymorphism in some samples. This method is amenable to multiplexing and has promise for scanning unknown mutations.

Alleles↗