Biomedical subjects

Bo Mattiasson

Publications and source records attributed to Bo Mattiasson.

99 records · Page 6Linked to original sources

PubMedDate not supplied

Ion-exchange macroporous hydrophilic gel monolith with grafted polymer brushes.

The grafting of functional polymers to the pore surface of macroporous monolithic polyacrylamide cryogels was found to be an efficient and convenient method for the preparation of macroporous polyacrylamide gels, so-called cryogels (pAAm cryogels), with both controlled extent of functional group incorporated and with tailored surface chemistries. Anion-exchange polymer chains of poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA) and poly([2-(methacryloyloxy)ethyl]-trimethylammonium chloride) (pMETA), and cation-exchange polymer chains of polyacrylate have been grafted onto pAAm cryogels using potassium diperiodatocuprate as initiator. It was possible to achieve the ion-exchange capacity up to 0.2-0.5 mmol/ml. The graft polymerization did not alter the macroporous structure of the pAAm cryogel, however the flow rate of solutes through the cryogel matrix decreased with increase in the density of polymer grafted. The sorption of low-molecular-weight (metal ion, dye) and high-molecular-weight (protein) substances on the grafted monolithic pAAm column has been studied. The results indicate that a 'tentacle'-type binding of protein to grafted polymer depended on the architecture of the grafted polymer layer and took place after a certain degree of grafting has been reached. The binding of proteins by tentacle-like polymer chains allowed for increasing the binding capacity for proteins on the grafted pAAm cryogels up to 6-12 mg/ml.

Acrylic Resins↗

PubMedDate not supplied

Macroporous polyacrylamide monolithic gels with immobilized metal affinity ligands: the effect of porous structure and ligand coupling chemistry on protein binding.

Macroporous polyacrylamide gels (MPAAG) with iminodiacetic acid (IDA) functionality were prepared by (i) chemical modification of polyacrylamide gel, (ii) co-polymerization of acrylamide with allyl glycidyl ether (AGE) and N,N'metylene-bis(acrylamide) (MBAAm) followed by coupling IDA ligand or (iii) by copolymerization of acrylamide and MBAAm with functional monomer carrying IDA-functionality (1-(N,N-bis(carboxymethyl)amino-3-allylglycerol). Screening for optimized conditions for the production of the MPAAG with required porous properties was performed in a 96-well chromatographic format that allowed parallel production and analysis of the MPAAG prepared from reaction mixtures with different compositions. Scanning electron microscopy of the fabricated MPAAG revealed two different types of the porous structures: monomodal macroporous structure with large interconnected pores separated by dense non-porous pore walls in case of plain gels or gels produced via copolymerization with AGE. The other type of the MPAAG (gel produced via co-polymerization with functional monomer carrying IDA-functionality) had bimodal pore structure with large interconnected pores separated by the pore walls pierced through with micropores. The effect of different modifications of MPAAG monoliths and of porous structure of the MPAAG (monomodal and bimodal porous structure) on protein binding has been evaluated.

Acrylic Resins↗

PubMedDate not supplied

Recovery of urokinase from integrated mammalian cell culture cryogel bioreactor and purification of the enzyme using p-aminobenzamidine affinity chromatography.

An integrated product recovery system was developed to separate urokinase from the cell culture broth of human kidney cells HT1080. Supermacroporous monolithic cryogels provided ideal matrices with respect to surface and flow properties for use as cell culture scaffold as well as for affinity chromatographic capture step of the enzyme in the integrated system. The urokinase was produced continuously in the reactor running for 4 weeks with continuous circulation of 500 ml of culture medium. The enzyme activity in the culture medium reached to 280 Plough units (PU)/mg protein. Cu(II)-iminodiacetic acid (IDA)-polyacrylamide (pAAm) cryogel column was used to capture urokinase by integrating with the gelatin-coupled pAAm-cryogel bioreactor for HT1080 cell culture. After removing the urokinase capture column from the integrated system the bound protein was eluted. The metal affinity capture step gave 4.5-fold purification of the enzyme thus achieving a specific activity of 1300 PU/mg protein. The enzyme eluate from Cu(II)-IDA-pAAm cryogel capture column was further purified on benzamidine-Sepharose affinity column. This step finally led to a homogeneous preparation of different forms of urokinase in two different elution peaks with a best urokinase activity of 13 550 PU/mg of protein. As compared to initial activity in the cell culture broth, about 26.2- and 48.4-fold increase in specific activity was achieved with enzyme yields corresponding to 32% and 35% in two different peak fractions, respectively. Native electrophoresis and SDS-PAGE showed multiple protein bands corresponding to different forms of the urokinase, which were confirmed by Western blotting and zymography.

Benzamidines↗

PubMedDate not supplied

Interaction of sugars, polysaccharides and cells with boronate-containing copolymers: from solution to polymer brushes.

Interaction of mono- and disaccharides, polysaccharide particles and yeast cells with boronate-containing copolymers (BCC) of N-acryloyl-m-aminophenylboronic acid (NAAPBA) with N,N-dimethylacrylamide (DMAA) or N-isopropylacrylamide (NIPAM) was studied. The binding of saccharides to BCC of NIPAM resulted in a shift of its phase transition temperature (DeltaTP), which provided a quantitative measure for the complex formation. Among the sugars typical of non-reducing ends of glycoproteins the DeltaTP decreased in the order: N-acetylneuraminic acid > xylose approximately galactose > mannose approximately fucose >> N-acetylglucosamine. Strong specific adsorption of the BCC on the cross-linked agarose gel Sepharose CL-6B (15-30 mg/ml gel at pH 9.2) was registered. The copolymers adsorption was due to boronate-sugar interactions and decreased with pH. Multivalent interaction of the BCC with the agarose gel has been proven by liquid column chromatography exhibiting a weak reversible adsorption of NAAPBA and almost irreversible adsorption of DMAA-NAAPBA copolymer from 0.1 M sodium phosphate buffer, pH 7.9. The two studied BCCs could be completely desorbed from the gel by 0.1 M fructose in aqueous buffered media with pH from 7.5 to 9.2. In turn, the agarose particles and yeast cells were found to adhere to siliceous supports end-grafted with boronate-BCC of N,N-dimethylacrylamide at pH > or = 7.5, due to the actions. Quantitative detachment of adhered particles or cells could be attained by addition of 20 mM or 100 mM fructose, respectively, in the pH range from 7.5 to 9.2. Affinity adhesion of micron-size carbohydrate particles to boronate-containing polymer brushes fixed on solid supports was considered as a model system suggesting a new approach to isolation and separation of living cells.

Acrylamides↗

PubMedDate not supplied

Recovery of recombinant cutinase using detergent foam.

Foam generated by vigorous stirring of a nonionic detergent, Triton X-114, was used for the recovery of recombinant cutinase expressed by Saccharomyces cerevisiae. The enzyme with a hydrophobic fusion tag, (Trp-Pro)(4), was recovered with a higher yield as compared to the wild-type cutinase, indicating the involvement of hydrophobic interactions in protein isolation with the foam. The influence of various factors including volume, dilution, pH, different additives, and cell concentration in the medium on enzyme recovery was investigated. Interaction of the enzyme with detergent was monitored using fluorescence spectroscopy. No significant changes in protein conformation after the isolation procedure were observed using circular dichroism.

Carboxylic Ester Hydrolases↗

PubMedDate not supplied

Conjugation of penicillin acylase with the reactive copolymer of N-isopropylacrylamide: a step toward a thermosensitive industrial biocatalyst.

Conjugation of penicillin acylase (PA) to poly-N-isopropylacrylamide (polyNIPAM) was studied as a way to prepare a thermosensitive biocatalyst for industrial applications to antibiotic synthesis. Condensation of PA with the copolymer of NIPAM containing active ester groups resulted in higher coupling yields of the enzyme (37%) compared to its chemical modification and copolymerization with the monomer (9% coupling yield) at the same NIPAM:enzyme weight ratio of ca. 35. A 10-fold increase of the enzyme loading on the copolymer resulted in 24% coupling yield and increased by 4-fold the specific PA activity of the conjugate. Two molecular forms of the conjugate were found by gel filtration on Sepharose CL 4B: the lower molecular weight fraction of ca. 10(6) and, presumably, cross-linked protein-polymer aggregates of MW > 10(7). Michaelis constant for 5-nitro-3-phenylacetamidobenzoic acid hydrolysis by the PA conjugate (20 microM) was found to be slightly higher than that of the free enzyme (12 microM), and evaluation of V(max) testifies to the high catalytic efficiency of the conjugated enzyme. PolyNIPAM-cross-linked PA retained its capacity to synthesize cephalexin from d-phenylglycin amide and 7-aminodeacetoxycephalosporanic acid. The synthesis-hydrolysis ratios of free and polyNIPAM-cross-linked enzyme in cephalexin synthesis were 7.46 and 7.49, respectively. Thus, diffusional limitation, which is a problem in the industrial production of beta-lactam antibiotics, can be successfully eliminated by cross-linking penicillin acylase to a smart polymer (i.e., polyNIPAM).

Acrylic Resins↗

PubMedDate not supplied

Polyelectrolyte-coated ion exchangers for cell-resistant expanded bed adsorption.

Adsorption chromatography in expanded beds is a widely used technology for direct capture of target proteins from fermentation broths. However, in many cases this method cannot be applied as a result of the strong tendency of cells or cell debris to interact with the adsorbent beads. To prevent contamination of the expanded bed with the biomass, STREAMLINE DEAE, anion exchanger designed for expanded bed adsorption, was modified with a layer of poly(acrylic acid) (PAA). The shielding layer of polyelectrolyte was attached to the surface of the matrix beads via electrostatic interactions. PAA with a high degree of polymerization was chosen to prevent diffusion of large polymer molecules into the pores of adsorbent. Thus, the shielding layer of PAA was adsorbed only at the mouth of the pores of STREAMLINE DEAE beads and only marginally decreased the binding capacity of the ion exchanger for bovine serum albumin, the model protein in this study. PAA-coated STREAMLINE DEAE practically did not interact with yeast cells, which otherwise bound strongly to the native adsorbent at neutral conditions. Cell-resistant PAA-coated anion exchanger was successfully used for isolation of BSA from the model protein mixture containing BSA, lysozyme (positively charged at applied conditions), and yeast cells. The layer of PAA was stable under mild elution conditions, and the modified adsorbent could be used in the repeated purification cycles.

Adsorption↗

PubMedDate not supplied

Cell chromatography: separation of different microbial cells using IMAC supermacroporous monolithic columns.

Supermacroporous monolithic columns with Cu(2+)-IDA ligands have been successfully used for chromatographic separation of different types of microbial cells. The bed of monolithic matrix is formed by a cryogel of poly(acrylamide) cross-linked with methylenebis(acrylamide) and has a network of large (10-100 microm) interconnected pores allowing unhindered passage of whole cells through the plain cryogel column containing no ligands. Two model systems have been studied: the mixtures of wild-type Escherichia coli (w.t. E. coli) and recombinant E. coli cells displaying poly-His peptides (His-tagged E. coli) and of w.t. E. coli and Bacillus halodurans cells. Wild-type E. coli and His-tagged E. coli were quantitatively captured from the feedstock containing equal amounts of both cell types and recovered by selective elution with imidazole and EDTA, with yields of 80% and 77%, respectively. The peak obtained after EDTA elution was 8-fold enriched with His-tagged E. coli cells as compared with the peak from imidazole elution, which contained mainly weakly bound w.t. E. coli cells. Haloalkalophilic B. halodurans cells had low affinity to the Cu(2+)-IDA cryogel column and could be efficiently separated from a mixture with w.t. E. coli cells, which were retained and recovered in high yields from the column with imidazole gradient. All the cells maintained their viability after the chromatographic procedure. The results show that chromatography on affinity supermacroporous monolithic columns is a promising approach to efficient separations of individual cell types.

Bacillus↗

PubMedDate not supplied

Improved methods for prepurification and detection of staphylococcal enterotoxin B from cell-free culture filtrate.

An improved ELISA method for the detection of Staphylococcal Enterotoxin B (SEB) in protein A preparations is presented. Fab fragments were obtained by digestion with papain of anti-SEB IgG bound to SEB immobilized on Sepharose 4B. Anti-SEB and peroxidase-labeled Fab fragments from secondary antibodies were successfully used in a modified ELISA of SEB in protein A preparations. SEB-Sepharose was used repeatedly for the production of anti-SEB Fab fragments by papain digestion without loss of affinity. In addition, for the purification of SEB from crude culture filtrates, an initial step utilizing a combined heat and pH treatment for the removal of significant amounts of contaminating proteins without losses of toxin activity is presented. This pretreatment step yielded positive effects in further downstream processing considering both shortened time and an increase in total recovery.

Calibration↗