Search PubMed⌕ Search

Biomedical subjects

Bo Mattiasson

Publications and source records attributed to Bo Mattiasson.

At least 91 records · Page 5Linked to original sources

Monitoring of two-stage anaerobic biodegradation using a BOD biosensor.

A previously developed biosensor for fast estimation of short-term biochemical oxygen demand (BOD(st)) was used for off-line monitoring of intermediate products from the initial step of an anaerobic process in laboratory scale. Good agreement was generally achieved between the results from the biosensor method and the conventional 5-day test except for samples with high content of organic polymers. During the period of agreement between the measurement principles, good correlation was achieved between the biogas production rate and the organic loading rate. The results from this study demonstrate that BOD(st) can be a successful monitoring parameter to achieve a better process control.

Anaerobiosis↗

Cold-adapted yeasts as producers of cold-active polygalacturonases.

Eight cold-adapted, polygalacturonase-producing yeasts belonging to four species were isolated from frozen environmental samples in Iceland. They were identified as Cystofilobasidium lari-marini, Cystofilobasidium capitatum, Cryptococcus macerans and Cryptococcus aquaticus species by sequence analysis of rDNA regions. Growth behavior of the isolates was investigated. All strains could grow at 2 degrees C. Addition of glucose to pectin-containing culture medium had a repressive effect on enzyme production except for C. aquaticus, which showed increased polygalacturonase activity. Optimal temperature for enzyme production for the Cystofilobasidium strains was 14 degrees C, while that for the Cryptococcus strains was lower. Among the isolates, C. lari-marini S3B produced highest levels of enzyme activity at pH 3.2. Preliminary characterization of the polygalacturonases in the culture supernatant showed the enzyme from Cystofilobasidium strains to be optimally active at 40 degrees C and pH 5, and that from the Cryptococcus strains at 50 degrees C and pH 4. The polygalacturonase from C. macerans started to lose activity after 1 h of incubation at 40 degrees C, while that from the other strains had already lost activity at 30 degrees C. All the strains except C. aquaticus produced isoenzymes of polyglacturonase. In addition to polygalacturonase, the Cystofilobasidium strains produced pectin lyase, C. aquaticus pectin esterase, and C. macerans pectin lyase, pectate lyase and pectin esterase.

Carbon↗

Direct chromatographic capture of enzyme from crude homogenate using immobilized metal affinity chromatography on a continuous supermacroporous adsorbent.

A continuous supermacroporous matrix has been developed allowing direct capture of enzyme from non-clarified crude cell homogenate at high flow-rates. The continuous supermacroporous matrix has been produced by radical co-polymerization of acrylamide, allyl glycidyl ether and N,N'-methylene-bis(acrylamide) which proceeds in aqueous solution of monomers frozen inside a column (cryo-polymerization). After thawing, the column contains a continuous matrix having interconnected pores of 10-100 microm size. Iminodiacetic acid covalently coupled to the cryogel is a rendering possibility for immobilized metal affinity chromatographic purification of recombinant His-tagged lactate dehydrogenase, (His)6-LDH, originating from thermophilic bacterium Bacillus stearothermophilus, but expressed in Escherichia coli. The large pore size of the adsorbent makes it possible to process particulate-containing material without blocking the column. No preliminary filtration or centrifugation is needed before application of crude extract on the supermacroporous column. A total of 210 ml crude homogenate, 75 ml of it non-clarified, was processed on a single 5.0 ml supermacroporous column at flow speeds up to 12.5 ml/min without noticeable impairment of the column properties. Mechanically the cryogel adsorbent is very stable. The continuous matrix could easily be removed from the column, dried at 70 degrees C and kept in a dry state. After rehydration and reinsertion of the matrix into an empty column, (His)6-LDH was purified as efficiently as on the newly prepared column. The procedure of manufacturing the supermacroporous continuous cryogel is technically simple. Starting materials and initiators are cheap and available and are simply mixed and frozen under specified conditions. Altogether these qualities reveal that the supermacroporous continuous cryogels is a very interesting alternative to existing methods of protein purification from particulate-containing crude extracts.

Adsorption↗

Affinity fractionation of lymphocytes using a monolithic cryogel.

A new type of continuous, supermacroporous, monolithic, cryogel affinity adsorbent was developed, allowing specific fractionation and separation of human peripheral blood lymphocytes in a chromatographic format. The affinity adsorbent was used to design a novel cell separation strategy, which was based on the interaction of protein A from Staphylococcus aureus with cells bearing IgG antibodies on the surface. After treating lymphocytes with goat anti-human IgG(H+L), the IgG-positive B-lymphocytes were efficiently separated from T-lymphocytes. Protein A covalently coupled to epoxy activated dimethylacrylamide (DMAA) cryogel matrix specifically bound IgG-bearing B-lymphocytes through the Fc region, while non-bound T-lymphocytes passed through the column. More than 90% of the B-lymphocytes were retained in the column while the cells in the breakthrough fraction were enriched in T-lymphocytes (81%). The viability of the T-lymphocytes isolated was greater than 90%. The bound lymphocytes released by human or dog IgG recovered 60-70% of the B-cells without significantly impairing the cell viability. The technique can be applied in general to cell separation systems where IgG antibodies against specific cell surface markers are available.

Blood Proteins↗

Polymeric cryogels as promising materials of biotechnological interest.

Cryogels are gel matrices that are formed in moderately frozen solutions of monomeric or polymeric precursors. Cryogels typically have interconnected macropores (or supermacropores), allowing unhindered diffusion of solutes of practically any size, as well as mass transport of nano- and even microparticles. The unique structure of cryogels, in combination with their osmotic, chemical and mechanical stability, makes them attractive matrices for chromatography of biological nanoparticles (plasmids, viruses, cell organelles) and even whole cells. Polymeric cryogels are efficient carriers for the immobilization of biomolecules and cells.

Biocompatible Materials↗

Synergistic relationships in algal-bacterial microcosms for the treatment of aromatic pollutants.

The potential of algal-bacterial microcosms was studied for the biodegradation of salicylate, phenol and phenanthrene. The isolation and characterization of aerobic bacterial strains capable of mineralizing each pollutant were first conducted. Ralstonia basilensis was isolated for salicylate degradation, Acinetobacter haemolyticus for phenol and Pseudomonas migulae and Sphingomonas yanoikuyae for phenanthrene. The green alga Chlorella sorokiniana was then cultivated in the presence of the pollutants at different concentrations, showing increasing inhibitory effects in the following order: salicylate < phenol < phenanthrene. The synergistic relationships in the algal-bacterial microcosms were clearly demonstrated, since for the three contaminants tested, a substantial removal (>85%) was recorded only in the systems inoculated with both algae and bacteria and incubated under continuous lighting. This study presents, to our knowledge, the first reported case of photosynthesis-enhanced biodegradation of toxic aromatic pollutants by algal-bacterial microcosms in a one-stage treatment.

Acinetobacter↗

Aerobic biodegradation of nonylphenol by cold-adapted bacteria.

Three strains capable of mineralizing nonylphenol as sole carbon source were isolated from a sample of contaminated soil and characterized as two Pseudomonas spp. and a Stenotrophomonas sp. The two Pseudomonas spp. expressed characteristics typical of psychrophiles growing optimally of 10 degrees C and capable of growing at 0 degree C. The Stenotrophomonas sp. was more likely psychrotrophic because it had an optimal temperature between 14 and 22 degrees C although it was not capable of growing at 4 degrees C. At 14 degrees C, one of the Pseudomonas spp. exhibited the highest rate of degradation of nonylphenol (4.4 mg l-1 d-1), when compared with axenic or mixed cultures of the isolates. This study represents, to the best of our knowledge, the first reported case of cold-adapted microorganisms capable of mineralizing nonylphenol.

Adaptation, Physiological↗

Biodegradation of nonylphenol in a continuous packed-bed bioreactor.

A packed bed bioreactor, with 170 ml glass bead carriers and 130 ml medium, was tested for the removal of the endocrine disrupter, nonylphenol, with a Sphingomonas sp. The bioreactor was first continuously fed with medium saturated with nonylphenol in an attempt to simulate groundwater pollution. At best, nonylphenol was degraded by 99.5% at a feeding rate of 69 ml h(-1) and a removal rate of 4.3 mg nonylphenol day(-1), resulting in a 7.5-fold decrease in effluent toxicity according to the Microtox. The bioreactor was then fed with soil leachates at 69 ml h(-1) from artificially contaminated soil (1 g nonylphenol kg(-1) soil) and a real contaminated soil (0.19 g nonylphenol kg(-1) soil). Nonylphenol was always completely removed from the leachates of the two soils. It was removed by 99% from the artificial soil but only 62% from real contaminated soil after 18 and 20 d of treatment, respectively, showing limitation due to nonylphenol adsorption.

Biodegradation, Environmental↗

Metal chelate affinity precipitation of RNA and purification of plasmid DNA.

The affinity of metal chelates for amino acids, such as histidine, is widely used in purifying proteins, most notably through six-histidine 'tails'. We have found that metal affinity interactions can also be applied to separation of single-stranded nucleic acids through interactions involving exposed purines. Here we describe a metal affinity precipitation method to resolve RNA from linear and plasmid DNA. A copper-charged copolymer of N-isopropyl acrylamide (NIPAM) and vinyl imidazole (VI) is used to purify plasmid from an alkaline lysate of E. coli. The NIPAM units confer reversible solubility on the copolymer while the imidazole chelates metal ions in a manner accessible to interaction with soluble ligands. RNA was separated from the plasmid by precipitation along with the polymer in the presence of 800 mM NaCl. Bound RNA could be recovered by elution with imidazole and separated from copolymer by a second precipitation step. RNA binding showed a strong dependence on temperature and on the type of buffer used.

Acrylamides↗

Salicylate biodegradation by various algal-bacterial consortia under photosynthetic oxygenation.

Four green microalgae (Chlorella sorokiniana, Chlorella vulgaris, Scenedesmus obliquus and Selenastrum capricornutum), a wild Bolivian microalga strain and two cyanobacteria (Anabaena catenula and Microcystis aeruginosa) were compared for tolerance to salicylate, O2 production capacity and ability to support salicylate degradation by a Ralstonia basilensis strain in symbiotic microcosms with the microalgae. Microcystis aeruginosa had the highest tolerance to salicylate at 500 mg l(-1) and 1500 mg l(-1) but only produced 0.7 mg O2 l(-1) h(-1) in the absence of pollutant. Chlorella sorokiniana resisted salicylate at 1500 mg l(-1) with the highest O2 production in the absence of salicylate (26 mg l(-1) h(-1)) closely followed by the Bolivian microalga (23 mg l(-1) h(-1)) and Chlorella vulgaris (21 mg l(-1) h(-1)). Selenastrum capricornutum and Anabaena catenula were completely inhibited by salicylate at 500 mg l(-1). When inoculated with Ralstonia sp. and supplied with salicylate, Chlorella sorokiniana had the highest removal rate (19 mg l(-1) h(-1)), followed by the wild Bolivian strain (18 mg l(-1) h(-1)) and Chlorella vulgaris (14 mg l(-1) h(-1)).

Biodegradation, Environmental↗

Incomplete degradation of polycyclic aromatic hydrocarbons in soil inoculated with wood-rotting fungi and their effect on the indigenous soil bacteria.

Soil artificially contaminated with fluorene, phenanthrene, pyrene, and benz[a]anthracene was inoculated with the wood-rotting fungi Plrurotus ostreatus and Antrodia vaillantii. During 12 weeks of incubation, polycyclic aromatic hydrocarbon (PAH) degradation and the formation of persistent degradation products were monitored by chemical analysis. In addition, the effect on the indigenous soil bacteria was studied by plate count techniques and by measuring the concentration of bacteria-specific phospholipid fatty acids (PLFAs). In both soils inoculated with fungi, the PAH degradation was enhanced compared to the control soil without fungi. The white-rot fungus P. ostreatus accelerated the degradation rate radically the first weeks, while the effect of the brown-rot fungus was more pronounced at later stages during the 12-week study. In a soil with no amendments, the final degradation result was similar to that in the soil with added fungi, although the degradation pattern for the individual PAHs was different. Furthermore, the degradation by P. ostreatus was accompanied by an accumulation of PAH metabolites, that is, 9-fluorenone, benz[a]anthracene-7,12-dione, and two compounds identified as 4-hydroxy-9-fluorenone and 4-oxapyrene-5-one, that was not seen in the other soils. The inoculation with the white-rot fungus also had a large negative effect on the indigenous soil bacteria. This could be an important drawback of using the white-rot fungus P. ostreatus in soil bioremediation since a sequential fungal-bacterial degradation probably is needed for a complete degradation of PAHs in soil. In the soil inoculated with A. vaillantii, on the other hand, no metabolites accumulated, and no negative effects were observed on the indigenous microorganisms.

Basidiomycota↗

Chromatography of microbial cells using continuous supermacroporous affinity and ion-exchange columns.

Continuous supermacroporous chromatographic columns with anion-exchange ligands [2-(dimethylamino)ethyl group] and immobilized metal affinity (IMA) ligands (Cu2+-loaded iminodiacetic acid) have been developed allowing binding of Escherichia coli cells and the elution of bound cells with high recoveries. These poly(acrylamide)-based continuous supermacroporous columns have been produced by radical co-polymerization of monomers in aqueous solution frozen inside a column (cryo-polymerization). After thawing, the column contains a continuous matrix (so-called cryogel) with interconnected pores of 10-100 microm in size. The large pore size of the matrix makes it possible for E. coli cells to pass unhindered through a plain column containing no ligands. E. coli cells bound to an ion-exchange column at low ionic strength were eluted with 70-80% recovery at NaCl concentrations of 0.35-0.40 M, while cells bound to an IMA-column were eluted with around 80% recovery using either 10 mM imidazole or 20 mM EDTA solutions, respectively. The cells maintain their viability after the binding/elution procedure. These preliminary results indicate that microbial cells can be handled in a chromatographic mode using supermacroporous continuous columns. These columns are easy to manufacture from cheap and readily available starting materials, which make the columns suitable for single-time use.

Chromatography, Affinity↗

Application of shielding boronate affinity chromatography in the study of the glycation pattern of haemoglobin.

Human haemoglobin (Hb) may appear in a number of glycated species. The glycation pattern of Hb using shielding boronate affinity chromatography (SBAC) has been studied in the present work. SBAC is a novel separation technique, which eliminates nonspecific boronate-protein interactions by introducing a so-called shielding reagent. Two samples from Bio-Rad (Lyphochek)--one from normal persons' blood with relatively low HbA(1c) level (HbL) and the other from diabetic patients' blood with an elevated HbA(1c) level (HbH)--were used for the investigation. Glycated Hb (GHb) was separated from nonglycated Hb species using Tris as the shielding reagent. Two eluted peaks, eluted peak 1 (E1) and eluted peak 2 (E2), were obtained using a linear gradient elution with Tris. Several bands were observed on isoelectric focusing gel, which showed the same migration positions as Hb adducts, such as HbA(0), which is major Hb component containing two alpha chains and two beta chains; HbA(1c), which is post-translational glycation on the N-terminus of the beta chains of HbA(0); Foetal Hb (HbF), consisting of two alpha chains and two gamma chains; and glutathione Hb (also called HbSSG), which is the result from thiol-disulphide interchain exchange during oxidation of the thiol groups of Hb. In both HbL and HbH samples, E2 exhibited slightly higher amounts of HbF than E1. Electrospray-ionisation mass spectrometry showed that: (1) HbL-E1 was glycated with single glucose on both alpha and beta chains while no observable glycated chains were present in HbL-E2; (2) both HbH-E1 and HbH-E2 were glycated with single glucoses on both alpha and beta chains, however, compared with HbH-E1, HbH-E2 showed a higher relative intensity of the glycated beta chain and lower relative intensity of the glycated alpha chain; and (3) the degree of glycation increased with increasing glycation level of the sample. The amount of HbA(1c) presented in the eluted peaks was further determined using enzymatic digestion of glycated Hb by endoproteinase Glu-C and the subsequent separation and analysis of the digested peptides by reversed-phase high-performance liquid chromatography and capillary electrophoresis. The values of HbA(1c)/HbA(0) of the eluted peaks, i.e. HbL-E1, HbL-E2, HbH-E1 and HbH-E2, were 0.27, 0.19, 0.50 and 0.43, respectively. In both HbL and HbH samples, E1 contained higher amounts of HbA(1c) than E2. This study demonstrates the structural heterogeneity of GHb as well as the possibility of using SBAC to detect glycated species of Hb.

Boronic Acids↗

Selective recovery of lactate dehydrogenase using affinity foam.

Selective isolation of lactate dehydrogenase (LDH) from porcine muscle extract was studied using foam generated from the vigorous stirring of a non-ionic surfactant, Triton X-114 derivatized with Cibacron blue. The cloud point of the surfactant-dye conjugate was higher than that of the native Triton X-114, and also the foam prepared from the affinity surfactant was more rigid taking a longer time to collapse. The equilibrium dissociation constant between pure LDH and surfactant-dye conjugate was 5.0 microM as compared to the value of 2.2 microM for the enzyme and free dye as measured by differential spectroscopy. The isolation procedure involved mixing of the porcine muscle extract with the affinity foam, separating and collapsing the foam, and warming the solution formed to 37 degrees C to yield the surfactant-dye phase and an aqueous phase containing the enzyme. The effect of surfactant concentration and protein load on enzyme recovery and purification was investigated. Under optimal conditions, LDH was quantitatively recovered with high purification factor in a very short time. Both recovery and purification were higher when foam prepared from an equivalent mixture of surfactant-dye conjugate and unmodified surfactant was used. The selectivity of interaction between LDH and detergent-dye conjugate was confirmed by lowered recovery when NADH was included during the binding step.

Affinity Labels↗

Direct capture of product from fermentation broth using a cell-repelling ion exchanger.

A new technique for treating anion exchangers has been proposed allowing direct capture of the fermentation product, shikimic acid directly from the cell-containing fermentation broth. A layer of hydrophilic polymer, poly(acrylic acid) (PAA) has been physically adsorbed on the anion exchanger followed by a covalent cross-linking of PAA. The PAA layer is penetrable for small molecules despite being negatively charged as PAA is, but the polymer layer repels large negatively charged structures like cell debris and cells preventing them from adsorption to the chromatographic matrix. The binding capacity for pure shikimic was about 81 mg/ml adsorbent for both cross-linked PAA-Amberlite and native Amberlite in the fluidized mode of column operation. Binding capacity dropped to 17 and 15 mg per ml adsorbent, respectively, when using filtrated fermentation broth and to about 10 mg/ml adsorbent for cross-linked PAA-Amberlite when using directly the fermentation broth containing cells. Native Amberlite cannot be used for the direct capture of shikimic acid due to the immediate clogging of the column and the collapse of the expanded bed. The cross-linked PAA-Amberlite was used repeatedly for the direct adsorption of shikimic acid from the industrial fermentation broth.

Acrylic Resins↗

Microbial BOD sensors for wastewater analysis.

The field of biosensors for measuring biochemical oxygen demand (BOD) is reviewed. Particularly, BOD sensors constructed on the biofilm configuration are discussed regarding performance characteristics like linearity, response time, precision, agreement between BOD values obtained from the biosensors and the conventional 5-days test, as well as toxic resistance to various compounds and operational stability. The techniques for improving the agreement between the sensor BOD and BOD5 are described. Information provided also includes BOD biosensors based on respirometers and other measuring principles, the commercial BOD instruments, as well as the current limitations of BOD biosensor development.

Biofilms↗

Affinity binding of cells to cryogel adsorbents with immobilized specific ligands: effect of ligand coupling and matrix architecture.

The capture of human acute myeloid leukemia KG-1 cells expressing the CD34 surface antigen and the fractionation of human blood lymphocytes were evaluated on polyvinyl alcohol (PVA)-cryogel beads and dimethyl acrylamide (DMAAm) monolithic cryogel with immobilized protein A. The affinity ligand (protein A) was chemically coupled to the reactive PVA-cryogel beads and epoxy-derivatized monolithic cryogels through different immobilization techniques and the binding efficiency of the cell surface receptors specific antibody-labeled cells to the gels/beads was determined. The binding of cells to monolithic cryogel was higher (90-95%) compared with cryogel beads (76%). B-lymphocytes, which bound to the protein A-cryogel beads, were separated from T-lymphocytes with yields for the two cell types 74 and 85%, respectively. About 91% of the bound B-cells could be recovered without significantly impairing their viability. Our results show differences in the percentage of cell-binding to the immunosorbents caused by ligand density, flow shear forces and bond strength between the cells and the affinity surface once distinct chemical coupling of protein A, size of beads, sequence of antibody binding to protein A adsorbents, morphology and geometry of surface matrices were compared.

Antigens, CD19↗