Search PubMed⌕ Search

Biomedical subjects

B S Jacobson

Publications and source records attributed to B S Jacobson.

At least 55 records · Page 3Linked to original sources

Pure gelatin microcarriers: synthesis and use in cell attachment and growth of fibroblast and endothelial cells.

A new type of microcarrier was described using bead emulsion-polymerization techniques. An aqueous solution of gelatin and glutaraldehyde was dispersed in a hydrophobic phase of mineral oil, using Triton X-114 as an emulsifier, and polymerization was initiated. The resultant spherical beads, composed entirely of gelatin, showed excellent mechanical stability to ethanol drying, sterilization, and long-term use in microcarrier spinner cultures. The solid gelatin microcarriers supported the growth of L-929 fibroblast, swine aorta endothelial, human umbilical endothelial, and HeLa-S3 cultures with no adverse effects on cell morphology or growth. The beads were transparent in growth medium and attached cells were clearly visualized without staining. The beads were also compatible with techniques for scanning electron microscopy. Collagenase could be used to entirely digest the gelatin beads, leaving the cells free from microcarriers and suspended in solution while retaining 98% cell viability. The results further showed that after collagenase treatment the cells would populate fresh gelatin microcarriers and grow to confluence. Cell attachment kinetics revealed that the endothelial cells attached to the gelatin beads at the same rate as to tissue culture plates, whereas the fibroblast cells attached to the beads more slowly. However, once the fibroblast cells were attached to the gelatin microcarriers they spread and grew normally.

Animals↗

Evaluation of the silica microbead method for isolation of red beet protoplast plasma membrane sheets.

The silica microbead procedure was utilized for the isolation of plasma membrane sheets from protoplasts of a higher plant, the red beet (Beta vulgaris L.). Membrane yields, as determined by recovery of an exogenous membrane marker were approx. 75%. The plasma membrane fraction contained the enzyme marker, pH 6.5, vanadate-sensitive, K+-stimulated, Mg2+-ATPase and small amounts of mitochondria, endoplasmic reticulum, and possibly tonoplast. The silica microbead procedure was also used for the isolation of intact vacuoles from microbead-coated protoplasts.

Cell Fractionation↗

Coating cells with colloidal silica for high yield isolation of plasma membrane sheets and identification of transmembrane proteins.

Plasma membrane (PM) can be isolated by binding to a positively charged solid support. Using this concept, we have developed a novel method of PM isolation using cationic colloidal silica. The method is designed for the comparative study of various physiological states of PM and for transbilayer protein mapping. The procedure consists of coating intact cells with a dense pellicle of silica particles and polyanion. Since cells remain intact during pellicle formation, the external face of the PM is selectively coated. The pellicle greatly enhances PM density and stabilizes it against vesiculation or lateral reorientation. Upon cell lysis, large open sheets of PM are rapidly isolated by centrifugation. PM from Dictyostelium discoideum was prepared by this method. Marker enzymes, cell surface labeling and microscopy demonstrate that the PM was isolated in high yield (70-80%) with a 10-17-fold purification and only low levels of cytoplasmic contamination. The pellicle remains intact during cell lysis and membrane isolation, shielding the external surface of the membranes up to 92% from chemical or enzymatic attack. The PM can thus be labeled selectively from inside and/or outside. Transmembrane proteins were identified in Dictyostelium PM by means of lactoperoxidase iodination and autoradiography.

Cell Fractionation↗

Unique morphology of HeLa cell attachment, spreading and detachment from microcarrier beads covalently coated with a specific and non-specific substratum.

A SEM and TEM evaluation of adhesion of HeLa-S3 cells to suspensions of culture microcarriers coated with various substrata revealed two unique cell morphologies. One is similar to that for cells attaching to culture dishes and the other one only appeared with microcarriers stirred under high shear conditions. The usual appearance of a spreading cell is to change from a sphere to the shape of a 'fried egg'. This proceeded in HeLa cells by a radial extension of the filopodia in between which the cytoplasm subsequently filled. Fluorescent antibody staining of actin suggested that more actin was present at the periphery of the spreading edges of the cell than inwards. The above morphology was characteristic of HeLa cell attachment to gelatin-coated microcarriers. However, the morphology of the attachment to microcarriers coated with non-biological substances such as negatively charged sulfonate groups or positively charged polyethyleneimine or even with the attachment protein laminin was quite different. Here the cells attached and began to spread as with gelatin-microcarriers, however, the spreading was not radial but occurred from one or two major regions of the cell periphery. The cell then appeared to constrict with the formation of a substratum attached pedestal upon which the cell body was perched. With time the cell pinched-off from pedestal. Evidence indicated that the pedestal was quite fragile. Furthermore, fluorescent antiactin staining indicated that the initial spreading region contained abundant actin which was depleted upon pedestal formation and detachment. The above in addition to previous kinetic measurements provided the information to classify cell substrate attachment materials into two distinct types. One is specific substrata which promote normal attachment and spreading and appear to interact with specific cell surface proteins. The other is non-specific substrata which in high shear conditions induces pedestal formation followed by pinching-off of the cells. Had previous attachment assays been done under high shear as done with the microcarriers and HeLa cells it is likely that substrata classified as specific might be reclassified into non-specific.

Actins↗

HeLa cell adhesion to microcarriers in high shear conditions: evidence for membrane receptors for collagen but not laminin or fibronectin.

HeLa-S3 cells were analyzed for their ability to attach and spread on cell culture microcarriers that were made either positively or negatively charged with polymeric plastics or were coated with BSA, gelatin, fibronectin or laminin. The cells stuck to all microcarriers under low shear, i.e. low stirring conditions with similar rates of attachment. Except in the case of gelatin microcarriers where cells fully spread, cells did not or only partially spread on the others. Under high shear, cells attached with the following rates: positive = negative = gelatin = BSA greater than laminin greater than fibronectin. Cells detached from all but the gelatin and BSA coated beads. However, the cells did not fully spread on BSA beads. The observation that cells not only attached but also spread on gelatin beads indicated that gelatin could be a specific substratum adhesion protein while the other surfaces were 'non-specific'. It should be noted that neither antibodies to laminin nor fibronectin interfered with attachment to gelatin. Protein synthesis inhibitors reduced the attachment and spreading on gelatin beads under high but not low shear conditions. With low shear, attachment and spreading appeared normal. We concluded that the density of the cell surface attachment proteins was reduced by the protein synthesis inhibitors and there were not enough present to facilitate attachment under high shear. The results also indicated that protein synthesis was not essential for cell spreading. Proteolysis of the cell surface with low concentrations of trypsin abolished the attachment of cells to gelatin-coated beads. The reappearance of attachment ability took several hours and was inhibited by actinomycin-D.

Cell Adhesion↗

Interaction of the plasma membrane with the cytoskeleton: an overview.

The intent of this review was to point out the diversity of cellular functions thought to be mediated by PM-cytoskeleton interactions. Based upon possible molecular mechanism, the functions were categorized into those involving PM proteins which are dispersed and those involving clustered proteins. Functions associated with dispersed proteins are thought to mediate the stabilization and shape of the PM. Clustering of PM proteins provides the driving force inducing their interaction with the cytoskeleton. Clustering by external ligands, pH or ionic exchanges, etc., is also a means of transmembrane signalling. Various methods used to explore cytoskeletal-PM mediated functions were evaluated. The methods were considered separately under biophysical, morphological and biochemical headings. This made it easier to point out current and potential values of the methods as well as their limitations. Each method taken separately is insufficient to elucidate molecular mechanisms regulating cytoskeletal-PM reactions, but combined they hold great promise of future solutions.

Actins↗

Growth of endothelial and HeLa cells on a new multipurpose microcarrier that is positive, negative or collagen coated.

A new cell culture microcarrier that can be covalently bonded by cell attachment proteins and can be thin-sectioned for electron microscopy was synthesized. It was easily made by sulfonating cross-linked polystyrene beads for a negative surface charge followed by covalent attachment of polyethylenimine for a positive charge. Cell attachment proteins, e.g. collagen was covalently bonded directly to the microcarrier using a carbodiimide or after activating the microcarrier surface with glutaraldehyde. HeLa-S3 cells attached, spread and grew to confluence more efficiently on the positive microcarriers and those coated with collagen than on the negative ones. Endothelial cells, grew best on those with a negative surface charge. The nature of the microcarrier surface was not the only aspect involved in cell adhesion but also the type of serum proteins absorbed. Qualitatively different proteins coated the microcarriers depending upon whether the carrier was negative, positive or coated with collagen. Comparison of various types of available microcarriers indicated that the modified cross-linked polystyrene beads used here were best for transmission and scanning electron microscopy. Endothelial cells grown on the microcarriers had the same ultrastructure as cells grown in monolayers in culture dishes. Of a variety of microcarriers tested the modified cross-linked polystyrene beads were the only ones that could be used for both ultrastructural and biochemical techniques.

Animals↗

Explanation of anomalous binding kinetics with a high yield immobilized enzyme system.

The activities of glucose oxidase (beta-D-glucose:oxygen 1-oxidoreductase, EC 1.1.3.4) and catalase (hydrogen-peroxide:hydrogen-peroxide oxidoreductase, EC 1.11.1.6) from commercial preparations do not give typical adsorption curves upon immobilization on non-porous polyethylenimine-coated glass microbeads. The cause of this effect with glucose oxidase was investigated. Protein binding exhibited a rectangular hyperbolic adsorption isotherm, approaching saturation at high concentrations, however, enzyme activities did not. The isotherm for activities exhibited a maxima which corresponded to less than 50% saturation with regard to total protein adsorption. The enzyme preparation was found to contain small quantities of several low molecular weight impurities as judged by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. These impurities apparently compete with glucose oxidase for binding. When large excesses of protein are added to beads, the binding of impurities becomes significant and the amount of enzyme activity per unit of bead is reduced.

Catalase↗

Imporved method for isolation of plasma membrane on cationic beads. Membranes from Dictyostelium discoideum.

The plasma membrane from Dictyostelium discoideum was routinely purified 35-fold by an improved technique using beads coated with positively charged polymers. Cells were attached to the beads and bare regions between the cells were neutralized with a polyanion. The neutralization decreased contamination of the bare regions by intracellular proteins released when cells were disrupted to leave behind beads coated by plasma membrane. The neutralization increased the purification as measured by membrane-bound 125I-labeled concanavalin A. Contamination by markers for various intracellular components was markedly decreased. Various bare-site neutralization reagents were evaluated and gave different results depending upon their charge density and molecular weight. The pH of the neutralization was critical. The optimum pH for cell attachment to beads, 5.0, had little effect as regard bare-site neutralization. A new procedure is given that optimizes the essential features for the plasma membrane isolation on beads.

Cation Exchange Resins↗

High-yield method for immobilization of enzymes.

Two types of polyethylenimine-coated glass microbeads (13-44 micrometer) were synthesized and used for the immobilization of glucose oxidase from Aspergillus niger and catalase from A. niger and beef liver. The two types of beads were distinguishable by differences in their surface topography. Immobilizations were performed by adsorption followed by treatment with glutaraldehyde. The immobilized-enzyme activities per unit support of all of the enzymes tested were compared with and found to be superior to the immobilized activities attainable on aminopropyl-activated glass microbeads. When enzyme was present in less than saturating amounts, the coated beads were able to remove 100% of the glucose oxidase activity initially present in the immobilization solution, with 78-87% of that activity expressed on the support surface. Bound glucose oxidase was more stable to thermal inactivation than native enzyme.

Animals↗

Coupling polylysine to glass beads for plasma membrane isolation.

Solid glass beads for use in isolating cell membranes were coated with a stable, covalently attached layer of polylysine. The optimal conditions for coating the bead surface were established and the beads were tested by measuring the attachment of human erythrocyte plasma membranes. When compared to other beads, such as those with absorbed polylysine or protamine, none retained red-cell membranes as well as glass beads with covalently linked polylysine.

Adsorption↗

Membrane isolation on polylysine-coated glass beads. Asymmetry of bound membrane.

Erythrocyte membranes isolated on polylysine-coated glass beads exhibit many of the properties of the native membrane. Gel electrophoresis indicates that all major protein components of the membrane are retained during membrane isolation. The membrane integrity and accessibility of selected components was tested using non-penetrating probes. In general, membranes on beads displayed accessibility properties typical of inside-out vesicles. The accessibility of membrane acetylcholinesterase to assay reagents, as well as membrane accessibility to the actions of neuraminidase, trypsin and galactose oxidase-NaB3H4 demonstrated that the protoplasmic surface of membrane isolated on beads was exposed, while the extracellular surface was inaccessible. The differential accessibility of the membrane surfaces demonstrates the feasibility of investigating asymmetry of membranes isolated on cationic glass beads.

Acetylcholinesterase↗

Isolation of plasma membrane from eukaryotic cells on polylysine-coated polyacrylamide beads.

The conditions for covalently binding polylysine to polyacrylamide beads used for membrane isolation have been analyzed. Larger amounts of bead bound polylysine were required for maximimizing plasma membrane purification from HeLa cells than from Dictyostelium discoideum. The least was needed for erythrocytes. The amount of polylysine bound to the bead was dependent on the carboxyl content of the bead and on the concentration of the polylysine used during the bead-polylysine coupling reaction.

Acrylamides↗

Membrane isolation on polylysine-coated beads. Plasma membrane from HeLa cells.

HeLa cell plasma membranes have been purified after binding cells to polylysine-coated polyacrylamide beads. Cell attachment to beads and membrane recovery were maximal in a sucrose-acetate buffer, pH 5.0, at 25 degrees C. Measurements of ouabain-sensitive NaK-adenosine triphosphatase, membrane-bound 125I-wheat germ agglutinin, and chemical analyses showed that membranes on beads were of comparable or greater purity than membranes isolated by conventional methods. Because the isolation procedure is rapid (approximately 2.5 h), and produces membranes whose protoplasmic surfaces are fully exposed, it should be a useful supplement to standard isolation techniques.

Cell Count↗