Search PubMed⌕ Search

Biomedical subjects

A C Steven

Publications and source records attributed to A C Steven.

At least 73 records · Page 4Linked to original sources
PubMed1996

Dimorphism of hepatitis B virus capsids is strongly influenced by the C-terminus of the capsid protein.

Hepatitis B virus (HBV) is an enveloped virus with an icosahedral capsid. Its homodimeric capsid protein ("core antigen") assembles into particles of two sizes, one with T = 3 icosahedral symmetry (90 dimers) and the other with T = 4 symmetry (120 dimers). We have investigated this assembly process in vitro, using a variety of purified, bacterially expressed, capsid proteins. All of our constructs lacked the predominantly basic C-terminal 34 amino acids of the full-length capsid protein (183 amino acids) and were further truncated to terminate at specific points between residues 138 and 149. While the smallest construct (138 residues) did not assemble into capsids, those terminating at residue 140, and beyond, assembled into mixtures of T = 3 and T = 4 particles. The two kinds of capsids could be separated on sucrose gradients and did not interconvert upon protracted storage. The proportion of T = 3 capsids, assayed by sucrose gradient fractionation, analytical ultracentrifugation, and cryoelectron microscopy, was found to increase systematically with larger deletions from the C-terminus. The variant terminating at residue 149 formed approximately 5% of T = 3 capsids, while the 140-residue protein produced approximately 85% of this isomorph. For the 147-residue capsid protein, the structures of both capsids were determined to 17 A resolution by three-dimensional reconstruction of cryoelectron micrographs. In these density maps, the boundaries of the constituent dimers can be clearly seen and the quaternary structures of the two capsids compared. The arrangement of dimers around their icosahedral five-fold axes is almost identical, whereas the quasi-six-fold arrangements of dimers are distinctly different.

Amino Acid Sequence↗
PubMed1996

The capsid architecture of channel catfish virus, an evolutionarily distant herpesvirus, is largely conserved in the absence of discernible sequence homology with herpes simplex virus.

Although herpesviruses have a wide host range and their genomes vary substantially in size, the nucleocapsid appears to be a conservative element of viral design. The capsid shell is icosahedrally symmetric (T = 16), and 125 nm in diameter and 15nm thick in the case of herpes simplex virus 1 (HSV-1). Channel catfish virus (CCV) has the gross morphology of a herpesvirus, although no relationship to other herpesviruses is evident from the sequences of its proteins. To examine CCV capsid architecture more closely, we have determined its structure by cryoelectron microscopy and three-dimensional image reconstruction. The CCV capsid is smaller than that of HSV-1, but its 12% smaller genome is packed to essentially the same average density; its icosahedral facets are flatter, and its shell is about 20% thinner, consistent with the smaller size of its major capsid protein. Otherwise, their major features are remarkably similar: CCV has the same triangulation number; its hexons and pentons also have chimney-like protrusions with an axial channel through each capsomer; and there are "triplexes" on the outer surface at the sites of local threefold symmetry. The basic herpesvirus capsid architecture is, therefore, remarkably well conserved in CCV and implies a utilitarian basis to this design. The protein composition of CCV mirrors that of HSV-1, except for the absence of the 12-kDa protein, VP26, which is dispensable for assembly in the HSV-1 system and, apparently, wholly dispensable for CCV.

Animals↗
PubMed1996

Phage display of intact domains at high copy number: a system based on SOC, the small outer capsid protein of bacteriophage T4.

Peptides fused to the coat proteins of filamentous phages have found widespread applications in antigen display, the construction of antibody libraries, and biopanning. However, such systems are limited in terms of the size and number of the peptides that may be incorporated without compromising the fusion proteins' capacity to self-assemble. We describe here a system in which the molecules to be displayed are bound to pre-assembled polymers. The polymers are T4 capsids and polyheads (tubular capsid variants) and the display molecules are derivatives of the dispensable capsid protein SOC. In one implementation, SOC and its fusion derivatives are expressed at high levels in Escherichia coli, purified in high yield, and then bound in vitro to separately isolated polyheads. In the other, a positive selection vector forces integration of the modified soc gene into a soc-deleted T4 genome, leading to in vivo binding of the display protein to progeny virions. The system is demonstrated as applied to C-terminal fusions to SOC of (1) a tetrapeptide; (2) the 43-residue V3 loop domain of gp120, the human immunodeficiency virus type-1 (HIV-1) envelope glycoprotein; and (3) poliovirus VP1 capsid protein (312 residues). SOC-V3 displaying phage were highly antigenic in mice and produced antibodies reactive with native gp120. That the fusion protein binds correctly to the surface lattice was attested in averaged electron micrographs of polyheads. The SOC display system is capable of presenting up to approximately 10(3) copies per capsid and > 10(4) copies per polyhead of V3-sized domains. Phage displaying SOC-VP1 were isolated from a 1:10(6) mixture by two cycles of a simple biopanning procedure, indicating that proteins of at least 35 kDa may be accommodated.

Animals↗
PubMed1996

Differential expression and cell envelope incorporation of small proline-rich protein 1 in different cornified epithelia.

In the final stages of terminal differentiation in the epidermis and other squamous epithelia, a approximately 15 nm thick protein layer called the cornified cell envelope (CE) assembles on the keratinocytes' inner surface. Its constituent proteins are covalently crosslinked by the action of transglutaminases. Recent studies have indicated that the expression of CE precursor proteins may vary in different tissues. To investigate such variations further, we have studied the CEs of two different keratinizing epithelia of mouse: epidermis and forestomach, with particular focus on their contents of loricrin and the small proline-rich proteins (SPRs). To this end, we have applied electron microscopic immunocytochemistry and estimated the CE protein compositions by mathematical modeling of their amino acid compositions. Ultrastructurally, forestomach resembles the epidermis in having well defined cornified and granular layers. Minor but significant differences are: in forestomach, striated material resembling lamellar granules is intercalated between the cornified squames; and in forestomach granular layer cells, loricrin-containing L-granules are more abundant, and filaggrin-containing F-granules less abundant than in epidermis. In forestomach, dense labeling with anti-SPR1 antibody was observed at the margin of cornified layer cells; and in the granular layer, diffuse but positive labeling of both cytoplasm and nucleus. In contrast, epidermis was uniformly negative. Isolated forestomach CEs (but not epidermal CEs), labeled positively on the cytoplasmic side, consistent with the presence of covalently crosslinked SPR1. Our compositional analysis predicts the content of loricrin in forestomach CEs to be very high (approximately 65%), as in the epidermis, and accompanied by approximately 18% content of total SPRs. Of these, a substantial proportion should be SPR1, according to our immunolabeling data. In contrast, epidermal CEs are calculated to have a much lower amount of SPRs or SPR-like proteins (approximately 8%), with a negligible content of SPR1. Thus both kinds of CEs have loricrin as their major constituent but differ in their respective complements of SPRs, which are thought to inter-connect loricrin molecules in the final phase of CE assembly. Applying a basic concept of materials science, it may be that the observed differences in their SPR contents reflect differences in the mechanical and chemical properties required for the function of the respective CEs.

Amino Acid Sequence↗
PubMed1995

Proteolytic and conformational control of virus capsid maturation: the bacteriophage HK97 system.

Bacteriophage capsid assembly pathways provide excellent model systems to study large-scale conformational changes and other mechanisms that regulate the formation of macromolecular complexes. These capsids are formed from proheads: relatively fragile precursor particles which mature by undergoing extensive remodeling. Phage HK97 employs novel features in its strategy for building capsids, including assembly without a scaffolding protein, and the formation of a network of covalent cross-links between neighboring subunits in the mature virion. In addition, proteolytic cleavage of the capsid protein from 42 kDa to 31 kDa is essential for maturation. To investigate the structural bases for proteolysis and cross-linking, we have used cryo-electron micrographs to reconstruct the three-dimensional structures of purified particles from four discrete stages in the assembly pathway: Prohead I, Prohead II, Head I and Head II. Prohead I has icosahedral T = 7 packing of blister-shaped pentamers and hexamers. The pentamers are 5-fold symmetric, but the hexamers exhibit an unusual departure from 6-fold symmetry, as if two trimers had undergone a shear dislocation of about 25 A. Proteolytic conversion to Prohead II leaves the outer surface largely unchanged, but a major loss of density from the inner surface is observed, which we infer to represent the excision of the amino-terminal domains of the capsid protein. Upon expansion to the Head I state, the capsid becomes markedly larger, thinner walled, and more polyhedral: moreover, the capsomer shapes change radically; especially notable is the disappearance of the large hexon dislocation. No differences between Head I and the covalently cross-linked Head II could be observed at the current resolution of about 25 A, from which we infer that it is the conformational rearrangements effected by expansion that create the micro-environments needed for the autocatalytic formation of the isodipeptide bonds found in the mature virions ("pseudo-active sites").

Amino Acid Sequence↗
PubMed1995

Homology in structural organization between E. coli ClpAP protease and the eukaryotic 26 S proteasome.

Energy-dependent protein degradation is carried out by large multimeric protein complexes such as the proteasomes of eukaryotic and archaeal cells and the ATP-dependent proteases of eubacterial cells. Clp protease, a major multicomponent protease of Escherichia coli, consists of a proteolytic component, ClpP, in association with an ATP-hydrolyzing, chaperonin-like component, ClpA. To provide a structural basis for understanding the regulation and mechanism of action of Clp protease, we have used negative staining electron microscopy and image analysis to examine ClpA and ClpP separately, as well as active ClpAP complexes. Digitized images of ClpP and ClpA were analyzed using a novel algorithm designed to detect rotational symmetries. ClpP is composed of two rings of seven subunits superimposed in bipolar fashion along the axis of rotational symmetry. This structure is similar to that formed by the beta subunits of the eukaryotic and archaeal proteasomes. In the presence of MgATP, ClpA forms an oligomer with 6-fold symmetry when viewed en face. Side views of ClpA indicate that the subunits are bilobed with the respective domains forming two stacked rings. ClpAP complexes contain a tetradecamer of ClpP flanked at one or both ends with a hexamer of ClpA, resulting in a symmetry mismatch between the axially aligned molecules. Our findings demonstrate that, despite the lack of sequence similarity between ClpAP and proteasomes, these multimeric proteases nevertheless have a profound similarity in their underlying architecture that may reflect a common mechanism of action.

Adenosine Triphosphatases↗
PubMed1995

Hepatitis core antigen produced in Escherichia coli: subunit composition, conformational analysis, and in vitro capsid assembly.

The production and biochemical and physiocochemical analysis are described of recombinant-produced hepatitis B virus core antigen (HBcAg capsid) and the corresponding particle produced by a deletion mutant missing the C-terminal 39 residues (HBeAg). Conditions for producing HBeAg from HBcAg capsids by in vitro proteolysis are also described. The morphology and masses of these capsids were determined by scanning transmission electron microscopy. Both HBcAg and HBeAg capsids comprise two size classes that correspond to icosahedral lattices with triangulation numbers (T) of 3 and 4, containing 180 and 240 subunits per capsid, respectively. This dimorphism was confirmed by sedimentation equilibrium and sedimentation velocity measurements on a Beckman Optima XL-A analytical ultracentrifuge. More than 60% of HBcAg capsids were T = 4, whereas only 15-20% of HBeAg capsids were of this size class: the remainder, in each case, were T = 3. Circular dichroism and Raman spectroscopy were used to determine the overall secondary structures of HBcAg and HBeAg capsids. Both have high alpha-helical contents, implying that this capsid protein does not conform to the canonical beta-barrel motif seen for all plant and animal icosahedral viral capsids solved to date. We suggest that the C-terminal domain of HBcAg has a random coil conformation. In vitro dissociation of HBeAg capsids under relatively mild conditions yielded stable dimers. The reassociation of HBeAg dimers into capsids appears to be driven by hydrophobic processes at neutral pH. Capsid assembly is accompanied by little change in subunit conformation as judged by circular dichroism and fluorescence spectroscopy. The thermal stability of HBcAg capsids was compared calorimetrically with that of in vitro assembled HBeAg capsids. Both have melting temperatures > 90 degrees C, implying that the C-terminal region makes little difference to the thermal stability of HBcAg: nevertheless, we discuss its possible role in facilitating disassembly and the release of viral nucleic acid.

Calorimetry, Differential Scanning↗
PubMed1995

Improved methods for determination of rotational symmetries in macromolecules.

Rotational symmetries of macromolecules are most clearly perceived in the en face projection and may be assessed by inspection of rotational power spectra calculated from electron micrographs of individual particles. However, if the symmetry is not contrasted strongly, this procedure may be inconclusive since the relevant peak may not be convincingly higher than other spectral components. To some extent, this is a sampling problem since the number of repeating elements involved is usually small. We have devised more sensitive statistical tests for rotational symmetry that pool the information contents of entire populations of particles. Both tests involve combining the rotational spectra of many particles and comparing them with the spectra of surrounding background areas. One method is based on the well known t-test which estimates whether two populations differ at a given significance level. In the second test, the ratio between the intensity of each component of the rotational spectrum and the average corresponding intensity for background areas is calculated, and thence, the cumulative product of these ratios over all particles in the data set. If a symmetry is present, this product gradually diverges; otherwise, it converges to zero. As a practical trial, the tests were applied to micrographs of negatively stained hexons of herpes simplex virus and confirmed their 6-fold symmetry. Applied to negatively stained "connector" proteins of bacteriophage T7 purified from a plasmid expression system, both algorithms detected polymorphism with distinct subpopulations of both 13-fold and 12-fold connectors.

Algorithms↗
PubMed1995

Herpes simplex virus capsids assembled in insect cells infected with recombinant baculoviruses: structural authenticity and localization of VP26.

Recently, recombinant baculoviruses have been used to show that expression of six herpes simplex virus type 1 genes results in the formation of capsid-like particles. We have applied cryoelectron microscopy and three-dimensional image reconstruction to establish their structural authenticity to a resolution of approximately 2.7 nm. By comparing capsids assembled with and without the expression of gene UL35, we have confirmed the presence of six copies of its product, VP26 (12 kDa), around each hexon tip. However, VP26 is not present on pentons, indicating that the conformational differences between the hexon and penton states of the major capsid protein, VP5, extend to the VP26 binding site.

Animals↗
PubMed1994

Filamentous hemagglutinin of Bordetella pertussis. A bacterial adhesin formed as a 50-nm monomeric rigid rod based on a 19-residue repeat motif rich in beta strands and turns.

The filamentous hemagglutinin (FHA) of Bordetella pertussis is an adhesin that binds the bacteria to cells of the respiratory epithelium in whooping-cough infections. Mature FHA is a 220 kDa secretory protein that is highly immunogenic and has been included in acellular vaccines. We have investigated its structure by combining electron microscopy and circular dichroism spectroscopy (CD) with computational analysis of its amino acid sequence. The FHA molecule is 50 nm in length and has the shape of a horseshoe nail: it has a globular head that appears to consist of two domains; a 35 nm-long shaft that averages 4 nm in width, but tapers slightly from the head end; and a small, flexible, tail. Mass measurements by scanning transmission electron microscopy establish that FHA is a monomer. Its sequence contains two regions of tandem 19-residue pseudo-repeats: the first, of 38 cycles, starts at residue 344; the second, of 13 cycles, starts at residue 1440. The repeat motifs are predicted to consist of short beta-strands separated by beta-turns, and secondary structure measurements by CD support this prediction. We propose a hairpin model for FHA in which the head is composed of the terminal domains; the shaft consists mainly of the repeat regions conformed as amphipathic, hyper-elongated beta-sheets, with their hydrophobic faces apposed; and the tail is composed of the intervening sequence. Further support for the model was obtained by immuno-labeling electron microscopy. The 19-residue repeats of FHA have features in common with the leucine-rich repeats (LRRs) that are present in many eukaryotic proteins, including some adhesion factors. The model is also compared with the two other classes of filamentous proteins that are rich in beta-structure, i.e. viral adhesins and two beta-helical secretory proteins. Our proposed structure implies how the functionally important adhesion sites and epitopes of FHA are distributed: its tripeptide (RGD) integrin-binding site is assigned to the tail; the putative hemagglutination site forms part of the head; and two classes of immunodominant epitopes are assigned to opposite ends of the molecule. Possible mechanisms are discussed for two modes of FHA-mediated adhesion.

Adhesins, Bacterial↗
PubMed1994

Finding a needle in a haystack: detection of a small protein (the 12-kDa VP26) in a large complex (the 200-MDa capsid of herpes simplex virus).

Macromolecular complexes that consist of homopolymeric protein frameworks with additional proteins attached at strategic sites for a variety of structural and functional purposes are widespread in subcellular biology. One such complex is the capsid of herpes simplex virus type 1 whose basic framework consists of 960 copies of the viral protein, VP5 (149 kDa), arranged in an icosahedrally symmetric shell. This shell also contains major amounts of three other proteins, including VP26 (12 kDa), a small protein that is approximately equimolar with VP5 and accounts for approximately 6% of the capsid mass. With a view to inferring the role of VP26 in capsid assembly, we have localized it by quantitative difference imaging based on three-dimensional reconstructions calculated from cryo-electron micrographs. Purified capsids from which VP26 had been removed in vitro by treatment with guanidine hydrochloride were compared with preparations of the same depleted capsids to which purified VP26 had been rebound and with native (undepleted) capsids. The resulting three-dimensional density maps indicate that six VP26 subunits are distributed symmetrically around the outer tip of each hexon protrusion on VP26-containing capsids. Because VP26 may be readily dissociated from and reattached to the capsid, it does not appear to contribute significantly to structural stabilization. Rather, its exposed location suggests that VP26 may be involved in linking the capsid to the surrounding tegument and envelope at a later stage of viral assembly.

Capsid↗
PubMed1994

Mass analysis of biological macromolecular complexes by STEM.

Scanning transmission electron microscopy (STEM) provides a superbly versatile method of measuring the masses of macromolecular complexes ranging in size from single protein subunits to large virus particles. The physical basis of the method is the elastic scattering of electrons by the component atoms of the specimen. Unstained molecules yield a dark-field signal that is proportional to their local mass density, thus allowing direct measurements of the total mass of an individual particle, as well as of the masses of its resolved domains by integrating over appropriate regions of the image. In this review, we present an introduction to the STEM method of mass analysis from a practical standpoint, stressing the essential points of specimen preparation, as well as the scope and current limitations of the method. Its potentialities are illustrated by applications to several classes of macromolecules: isolated oligomeric proteins (the envelope glycoprotein of HIV), nucleoprotein complexes (SV40 minichromosome, transcription factor TFIIIC), membranous specimens (clathrin-coated membranes, the VDAC channel), and viruses (vesicular stomatitis virus; herpes simplex virus). In the case of multicomponent complexes, STEM mass measurements of both the intact complex and of defined biochemical derivatives (for instance, after extraction of specific components), allow one to compile complete and precise molecular inventories. Finally, we briefly anticipate future advances that should allow even more precise and detailed mass mappings, the labelling of specific sites with heavy atom clusters, and elemental mapping based on weak inelastic signals acquired in parallel with the relatively intense dark-field signals that have been so successfully exploited to date.

Animals↗
PubMed1994

Protein composition of cornified cell envelopes of epidermal keratinocytes.

Terminally differentiated mammalian epidermal cells are lined with a 15 nm thick layer of proteins cross-linked by isodipeptide and disulfide bonds, called the cornified cell envelope (CE). A number of proteins, including involucrin, loricrin, cystatin A, filaggrin, a cysteine-rich protein (CRP) and the 'small proline-rich' proteins (SPRRs) have been reported to be components of this complex, but little information has been obtained as to their relative abundances because the acute insolubility of the CEs has precluded direct methods of analysis. To address this question, we have determined the amino acid compositions of isolated CEs, and then modelled them in terms of linear combinations of the candidate proteins. The results show that stratum corneum CEs have a loricrin content of 65-70% (w/w) in human, and 80-85% in mouse. In human epidermal CEs, the secondary contributors are filaggrin and CRP (each approximately 10%), with smaller amounts of involucrin, SPRR and cystatin A (2-5% each) also present. Mouse epidermal CEs have about the same amount of filaggrin and somewhat more SPRR, but only trace amounts of the other proteins. In marked contrast, the major constituents of the CEs of cultured keratinocytes induced to terminal differentiation in vitro are cystatin A, involucrin and CRP (each approximately 30%). No significant amount of loricrin was detected except in sloughed mouse cells, which represent a more advanced state of terminal differentiation than attached cells.(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗
PubMed1993

Structure of the herpes simplex virus capsid. Molecular composition of the pentons and the triplexes.

The molecular anatomy of the herpes simplex virus (HSV-1) capsid has been examined by conventional electron microscopy, cryoelectron microscopy combined with three-dimensional image reconstruction, and scanning transmission electron microscopy (STEM). Studies were carried out with purified capsids before and after treatment with urea and guanidine hydrochloride (GuHCl) at concentrations that maintain the capsid's icosahedral geometry, but selectively extract certain of its protein components. Treatment with 6.0 M urea was found to remove the pentons quantitatively from the capsid vertices, but it caused no appreciable loss of hexons. Penton loss was correlated with solubilization of a small amount of VP5, the major HSV-1 capsid protein, and the amount solubilized (6.1%) was in good agreement with the amount expected (6.3%) if pentons are each composed of five copies of VP5. We conclude that the pentons, like the hexons, are composed of VP5, which exists as a pentamer at the capsid vertices (the pentons) and as a hexamer in all other capsomers (the hexons). Control capsids and capsids extracted with 2.0 M GuHCl (G2.0 capsids) were examined by cryoelectron microscopy and the resulting images were employed to compute three-dimensional reconstructions. Also, the masses of control and G2.0 capsids were determined by dark-field STEM and the results were used to calculate copy numbers for the proteins present. The three-dimensional reconstructions showed that control and G2.0 capsids are similar in structure, except that G2.0 capsids lack all 12 pentons and 120 of the 320 trigonal nodules or "triplexes" that connect HSV-1 capsomers in groups of three. The missing triplexes are the ten closest to each capsid vertex. Thus, the tightness with which triplexes are bound to the VP5 matrix varies according to position on the T = 16 icosahedral surface lattice, those closest to the pentons being most easily detached. Biochemical analyses revealed partial loss of the minor capsid proteins VP19 and VP23 in G2.0 compared to control capsids. Taking into account the STEM data on capsid protein stoichiometry, we propose that HSV-1 triplexes are heterotrimers composed of one copy of VP19 and two copies of VP23.

Capsid↗
PubMed1993

The mechanism of interaction of filaggrin with intermediate filaments. The ionic zipper hypothesis.

Filaggrins of mammalian epidermis represent archetypical examples of intermediate filament-associated proteins that can bind large numbers of intermediate filaments in vitro (and keratin filaments in vivo) into macrofibrils. To explore the mechanism of this interaction, the secondary structures of filaggrins were analyzed. As much as 80% of mouse and human filaggrins consist of multiple repeating elements. The first level consists of a tetrapeptide beta-turn motif in which about 35% of the turns are positively charged and about 10% are negatively charged. At the next level, triplets of this motif form segments 13 to 14 residues in length, which in turn are repeated two to six times into blocks separated by short hydrophobic sequences to constitute a complete filaggrin molecule. Thus, filaggrins evolved by frequent duplications of a primordial repeat unit of about 13 to 14 residues with subsequent retention of the conserved beta-turn and charge characteristics. To test how these features bind filaments, two approaches were used. Of a series of synthetic peptides, those of 20 to 26 residues (about 2 segments) containing at least five beta-turns with a net charge of +2 (that is, about 40% of the turns are positively charged) were as effective as full length filaggrin in binding large numbers of both type I/II keratin and type III vimentin/desmin filaments, as judged by electron microscopy. Secondly, macrofibrils formed from unlabeled filaggrin and keratin filaments labeled in vivo with [1-13C]glycine or L-[4,4,5,5-2H4]lysine were probed by nuclear magnetic resonance. The effective isotropy and time scale of mobilities of the glycine-labeled end domains were essentially identical in keratin filaments alone and those bound in macrofibrils, suggesting that filaggrins do not bind filaments by way of their end domains. However, the lysine-labeled rod domains of the filaments in macrofibrils were considerably more constrained than in filaments alone. These data support the hypothesis that filaggrins bind filaments by way of simple ionic and/or H-bonding interactions between the conserved positive and negative charges on the beta-turns of filaggrins and the conserved distributions of negative and positive charges along the packed rod domains of intermediate filaments, as in an ionic zipper.

Amino Acid Sequence↗
PubMed1993

Decoration of the microtubule surface by one kinesin head per tubulin heterodimer.

Kinesin, a microtubule-dependent ATPase, is believed to be involved in anterograde axonal transport. The kinesin head, which contains both microtubule and ATP binding sites, has the necessary components for the generation of force and motility. We have used saturation binding and electron microscopy to examine the interaction of the kinesin motor domain with the microtubule surface and found that binding saturated at one kinesin head per tubulin heterodimer. Both negative staining and cryo-electron microscopy revealed a regular pattern of kinesin bound to the microtubule surface, with an axial repeat of 8 nm. Optical diffraction analysis of decorated microtubules showed a strong layer-line at this spacing, confirming that one kinesin head binds per tubulin heterodimer. The addition of Mg-ATP to the microtubule-kinesin complex resulted in the complete dissociation of kinesin from the microtubule surface.

Adenosine Triphosphate↗
PubMed1993

The short tail-fiber of bacteriophage T4: molecular structure and a mechanism for its conformational transition.

Electron microscopy, image processing and computational sequence analysis were used to investigate the structure of the short tail-fiber of bacteriophage T4. This molecule, an oligomer of gp12, is an adhesin that binds the virion irreversibly to the bacterial surface. Short tail-fibers were isolated from mutant-infected cells in which gp12 is synthesized and assembled correctly, but not incorporated into virions. Visualized in negative stain, these filamentous molecules are approximately 38 nm in total length, with an arrowhead-shaped head (approximately 10 nm long by 6 nm wide), a 24-nm shaft of uniform width (approximately 3.8 nm), and a small, seemingly flexible, tail. The primary sequence contains a domain consisting of tandem quasi-repeats, each about 40 residues long, extending from approximately residue 50 to residue 320. Molecular mass analyses by scanning transmission electron microscopy confirm that the molecule is a trimer. The masses of the head, shaft, and tail domains are consistent with (trimers of) the carboxy-terminus, the repeat region, and the amino-terminus, respectively. When short tail-fibers are visualized extending from baseplates, their heads are distal, i.e., detached, implying that it is the tail that remains in contact with the baseplate. Analysis of the molecules' curvature properties detects three hinge-sites: these suggest how the short tail-fiber may be initially accommodated in a compact conformation in the "hexagon" state of the baseplate, from which it converts to the extended conformation when the baseplate switches into its "star" state.

Amino Acid Sequence↗