Biomedical subjects

A C Steven

Publications and source records attributed to A C Steven.

At least 55 records · Page 3Linked to original sources

PubMed1998

Three-dimensional structure of HIV-1 Rev protein filaments.

The HIV-1 Rev protein facilitates the export of incompletely spliced and unspliced viral mRNAs from the nucleus. Rev polymerizes into two types of filaments in vitro. In the presence of RNA, Rev forms poorly ordered structures, while in the absence of RNA it polymerizes into regular hollow filaments. We have determined the helical structure of the latter filaments by analysis of cryo-electron micrographs, taking into account STEM measurements of mass-per-unit-length. They are made up of Rev dimers, arranged in a six-start helix, with 31 dimers in 2 turns, a pitch angle of 45 degrees, and an interstrand spacing of 3.8 nm. Three-dimensional reconstruction at 2.1 nm resolution reveals a smooth outer surface and a featured inner surface, with outer and inner diameters of approximately 14.8 and approximately 10.4 nm, respectively. The Rev dimer has a "top-hat" shape with a cylinder approximately 3.2 nm in diameter and approximately 2.2 nm high, pointing inward: the thinner rim areas pack together to form the filament wall. Raman spectroscopy shows polymerized Rev to have approximately 54% alpha-helix and 20-24% beta-sheet content. Electron microdiffraction of aligned filaments reveals a broad meridional reflection at approximately (0.51 nm(-1, suggesting approximate alignment of the alpha-helices with the filament axis. Based on these data, a molecular model for the Rev filament is proposed.

Dimerization↗

PubMed1998

At sixes and sevens: characterization of the symmetry mismatch of the ClpAP chaperone-assisted protease.

ClpAP, a typical energy-dependent protease, consists of a proteolytic component (ClpP) and a chaperone-like ATPase (ClpA). ClpP is composed of two apposed heptameric rings, whereas in the presence of ATP or ATPgammaS, ClpA is a single hexameric ring. Formation of ClpAP complexes involves a symmetry mismatch as sixfold ClpA stacks axially on one or both faces of sevenfold ClpP. We have analyzed these structures by cryo-electron microscopy. Our three-dimensional reconstruction of ClpA at 29-A resolution shows the monomer to be composed of two domains of similar size that, in the hexamer, form two tiers enclosing a large cavity. Cylindrical reconstruction of ClpAP reveals three compartments: the digestion chamber inside ClpP; a compartment between ClpP and ClpA; and the cavity inside ClpA. They are connected axially via narrow apertures, implying that substrate proteins should be unfolded to allow translocation into the digestion chamber. The cavity inside ClpA is structurally comparable to the "Anfinsen cage" of other chaperones and may play a role in the unfolding of substrates. A geometrical description of the symmetry mismatch was obtained by using our model of ClpA and the crystal structure of ClpP (Wang et al., 1997, Cell 91, 447-456) to identify the particular side views presented by both molecules in individual complexes. The interaction is characterized by a key pair of subunits, one of each protein. A small turn (8.6(o) = 2pi/42; equivalent to a 4-A shift) would transfer the key interaction to another pair of subunits. We propose that nucleotide hydrolysis results in rotation, facilitating the processive digestion of substrate proteins.

Adenosine Triphosphatases↗

PubMed1998

Engineering trimeric fibrous proteins based on bacteriophage T4 adhesins.

The adsorption specificity of bacteriophage T4 is determined by genes 12 and 37, encoding the short tail-fibers (STF) and the distal part of the long tail-fibers (LTF), respectively. Both are trimeric proteins with rod domains made up of similar tandem quasi-repeats, approximately 40 amino acids long. Their assembly requires the viral chaperones gp57A and gp38. Here we report that fusing fragments of gp12 and gp37 to another trimeric T4 fibrous protein, fibritin, facilitates correct assembly, thereby by-passing the chaperone requirement. Fibritin is an alpha-helical coiled coil protein whose C-terminal part (fibritin E, comprising the last 120 residues) has recently been solved to atomic resolution. Gp12 fragments of 109 and 70 amino acids, corresponding to three and two quasi-repeats respectively, were fused to the C-terminus of fibritin E. A similar chimera was designed for the last 63 residues of gp37, which contain four copies of the pentapeptide Gly-X-His-X-His and assume a narrow rigid structure in the LTF distal tip. Expressed from plasmids, all three chimeras form soluble trimers that are resistant to dissociation by SDS and digestion by trypsin, indicative of correct folding and oligomerization.

Amino Acid Sequence↗

PubMed1998

Cornified cell envelope assembly: a model based on electron microscopic determinations of thickness and projected density.

In stratifying squamous epithelia, the cornified cell envelope (CE), a peripheral layer of crosslinked protein, is assembled sequentially from precursor proteins initially dispersed in the cytoplasm. Its major component is loricrin (37 kDa in mouse), which contributes from approx. 60% to >80% of the protein mass in different tissues. Despite its importance to the mechanical resilience and impenetrability of these tissues, detailed information has not been obtained on CE structure, even on such basic properties as its thickness or uniformity across a given CE or from tissue to tissue. To address this issue, we have studied CEs isolated from three murine epithelia, namely epidermis, forestomach and footpad, by electron microscopy of metal-shadowed specimens and scanning transmission electron microscopy (STEM) of unstained specimens. The former data reveal that the cytoplasmic surface is smoothly textured whereas the extracellular surface is corrugated, and that the average thickness is 15.3+/-1.2 nm, and strikingly uniform. Measurements of mass-per-unit-area from the STEM images yielded values of approx. 7.0+/-0.8 kDa/nm2, which were remarkably consistent over all three tissues. These data imply that the mature CE has a uniquely defined thickness. To explain its uniformity, we postulate that loricrin forms a molecular monolayer, not a variable number of multiple layers. In this scenario, the packing density is one loricrin monomer per 7 nm2, and loricrin should have an elongated shape, 2.5-3.0 nm wide by approx. 11 nm long. Moreover, we anticipate that any inter-tissue variations in the mechanical properties of CEs should depend more on protein composition and cross-linking pattern than on the thickness of the protein layer deposited.

Animals↗

PubMed1997

Encapsidated conformation of bacteriophage T7 DNA.

The structural organization of encapsidated T7 DNA was investigated by cryo-electron microscopy and image processing. A tail-deletion mutant was found to present two preferred views of phage heads: views along the axis through the capsid vertex where the connector protein resides and via which DNA is packaged; and side views perpendicular to this axis. The resulting images reveal striking patterns of concentric rings in axial views, and punctate arrays in side views. As corroborated by computer modeling, these data establish that the T7 chromosome is spooled around this axis in approximately six coaxial shells in a quasi-crystalline packing, possibly guided by the core complex on the inner surface of the connector.

Bacteriophage T7↗

PubMed1997

Structure of L-A virus: a specialized compartment for the transcription and replication of double-stranded RNA.

The genomes of double-stranded (ds)RNA viruses are never exposed to the cytoplasm but are confined to and replicated from a specialized protein-bound compartment-the viral capsid. We have used cryoelectron microscopy and three-dimensional image reconstruction to study this compartment in the case of L-A, a yeast virus whose capsid consists of 60 asymmetric dimers of Gag protein (76 kD). At 16-A resolution, we distinguish multiple domains in the elongated Gag subunits, whose nonequivalent packing is reflected in subtly different morphologies of the two protomers. Small holes, 10-15 A across, perforate the capsid wall, which functions as a molecular sieve, allowing the exit of transcripts and the influx of metabolites, while retaining dsRNA and excluding degradative enzymes. Scanning transmission electron microscope measurements of mass-per-unit length suggest that L-A RNA is an A-form duplex, and that RNA filaments emanating from disrupted virions often consist of two or more closely associated duplexes. Nuclease protection experiments confirm that the genome is entirely sequestered inside full capsids, but it is packed relatively loosely; in L-A, the center-to-center spacing between duplexes is 40-45 A, compared with 25-30 A in other double-stranded viruses. The looser packing of L-A RNA allows for maneuverability in the crowded capsid interior, in which the genome (in both replication and transcription) must be translocated sequentially past the polymerase immobilized on the inner capsid wall.

Capsid↗

PubMed1997

Localization of the C terminus of the assembly domain of hepatitis B virus capsid protein: implications for morphogenesis and organization of encapsidated RNA.

The capsid protein of hepatitis B virus, consisting of an "assembly" domain (residues 1-149) and an RNA-binding "protamine" domain (residues 150-183), assembles from dimers into icosahedral capsids of two different sizes. The C terminus of the assembly domain (residues 140-149) functions as a morphogenetic switch, longer C termini favoring a higher proportion of the larger capsids, it also connects the protamine domain to the capsid shell. We now have defined the location of this peptide in capsids assembled in vitro by engineering a mutant assembly domain with a single cysteine at its C terminus (residue 150), labeling it with a gold cluster and visualizing the cluster by cryo-electron microscopy. The labeled protein is unimpaired in its ability to form capsids. Our density map reveals a single undecagold cluster under each fivefold and quasi-sixfold vertex, connected to sites at either end of the undersides of the dimers. Considering the geometry of the vertices, the C termini must be more crowded at the fivefolds. Thus, a bulky C terminus would be expected to favor formation of the larger (T = 4) capsids, which have a greater proportion of quasi-sixfolds. Capsids assembled by expressing the full-length protein in Escherichia coli package bacterial RNAs in amounts equivalent to the viral pregenome. Our density map of these capsids reveals a distinct inner shell of density-the RNA. The RNA is connected to the protein shell via the C-terminal linkers and also makes contact around the dimer axes.

Capsid↗

PubMed1997

Visualization of a 4-helix bundle in the hepatitis B virus capsid by cryo-electron microscopy.

Despite the development of vaccines, the hepatitis B virus remains a major cause of human liver disease. The virion consists of a lipoprotein envelope surrounding an icosahedral capsid composed of dimers of a 183-residue protein, 'core antigen' (HBcAg). Knowledge of its structure is important for the design of antiviral drugs, but it has yet to be determined. Residues 150-183 are known to form a protamine-like domain required for packaging RNA, and residues 1-149 form the 'assembly domain' that polymerizes into capsids and, unusually for a capsid protein, is highly alpha-helical. Density maps calculated from cryo-electron micrographs show that the assembly domain dimer is T-shaped: its stem constitutes the dimer interface and the tips of its arms make the polymerization contacts. By refining the procedures used to calculate the map, we have extended the resolution to 9 A, revealing major elements of secondary structure. In particular, the stem, which protrudes as a spike on the capsid's outer surface, is a 4-helix bundle, formed by the pairing of alpha-helical hairpins from both subunits.

Capsid↗

PubMed1997

Structure of the herpes simplex virus capsid: peptide A862-H880 of the major capsid protein is displayed on the rim of the capsomer protrusions.

The herpes simplex virus-1 (HSV-1) capsid shell has 162 capsomers arranged on a T = 16 icosahedral lattice. The major capsid protein, VP5 MW = 149,075) is the structural component of the capsomers. VP5 is an unusually large viral capsid protein and has been shown to consist of multiple domains. To study the conformation of VP5 as it is folded into capsid promoters, we identified the sequence recognized by a VP5-specific monoclonal antibody and localized the epitope on the capsid surface by cryoelectron microscopy and image reconstruction. The epitope of mAb 6F10 was mapped to residues 862-880 by immunoblotting experiments performed with (1) proteolytic fragments of VP5, (2) GST-fusion proteins containing VP5 domains, and (3) synthetic VP5 peptides. As visualized in a three-dimensional density map of 6F10-precipitated capsids, the antibody was found to bind at sites on the outer surface of the capsid just inside the openings of the trans-capsomeric channels. We conclude that these sites are occupied by peptide 862-880 in the mature HSV-1 capsid.

Amino Acid Sequence↗

PubMed1997

Multiple conformational states of the bacteriophage T4 capsid surface lattice induced when expansion occurs without prior cleavage.

The maturation pathway of bacteriophage T4 capsid provides a model system for the study of largescale conformational changes, in that the precursor capsid progresses through four long-lived and widely differing states. The surface lattice first assembled (uncleaved/unexpanded state: hexagonal lattice constant, a = 11.8 nm) undergoes proteolytic cleavage (cleaved/unexpanded state), then expands (cleaved/ expanded state: a = 14.0 nm), and then binds accessory proteins. The most profound change, expansion, normally follows cleavage of the major capsid protein gp23 to gp23* (the 65-residue N-terminal "delta-domain" is removed), but can be induced in vitro in the absence of cleavage by treatment with 0.25 M guanidine-HCl (uncleaved/expanded state). We have studied this alternative pathway by negative staining electron microscopy of polyheads (tubular capsid variants). We find that uncleaved/expanded polyheads encompass four discrete states, called G1-G4, distinguished by their lattice constants of 12.6 nm (G1), 13.4 nm (G2), and 14.0 nm (G3, G4) and by the structures of their hexameric capsomers. Viewed in projection, the G4 capsomer differs from the cleaved/ expanded capsomer only in the presence of additional mass at one site per protomer. This mass correlates with the presence of the delta-domain, which translocates from the inner to the outer surface when the uncleaved lattice expands. Based on proximity of resemblance among these capsomers, we suggest that G1 to G4 represent a sequence of transitional states whose endpoint is G4. G1, G2, and G3 may correspond to intermediates that are too short-lived to be observed when the cleaved lattice expands, but are trapped by the retention of delta-domains at the interfaces between subunits in the uncleaved lattice.

Bacteriophage T4↗

PubMed1997

Spatial distributions of sulfur-rich proteins in cornifying epithelia.

We have used energy-filtered electron microscopy and electron energy loss spectroscopy (EELS) to characterize the distributions of sulfur-rich proteins in granular layer cells of squamous stratifying epithelia and their redistribution in the cornified layer, with particular attention to assembly of the cornified cell envelope (CE). Our measurements provide quantitative information that complements highly specific but qualitative data from immunocytochemistry. Spatial distributions of sulfur, phosphorus, and nitrogen were mapped in unstained thin sections of mouse epidermis and forestomach, using a postcolumn energy filter. Nitrogen images were indicative of total protein while phosphorus images provided a control to validate the algorithms used to calculate the elemental maps. Sulfur was found at high levels in round L-granules in the granulocyte cytoplasm and in the cornified CE, correlating with the presence of the protein, loricrin ( approximately 7% Cys/Met residues). EELS confirmed these observations quantitatively: either L-granules consist exclusively of loricrin or any additional components must have an equally high net sulfur content. These data also confirm the large fraction (approximately 75%) of loricrin in the CE, as inferred from modeling of its amino acid composition. We also observed extracellular deposits between cornified squames in fetal mouse epidermis that we call peripheral granules. Their sulfur content is at least as high as that of L-granules but they do not label with anti-loricrin antibodies, suggesting the presence of another sulfur-rich protein.

Animals↗

PubMed1997

Intermediate filament structure: hard alpha-keratin.

Structurally there are four classes of intermediate filaments (IF) with distinct but closely related axial organisations. One of these, hard alpha-keratin IF, has been studied to clarify several apparently exceptional features which include the number of molecules in the IF cross-section and the mode by which the axial organisation of its constituent molecules is stabilised. Using the dark-field mode of the STEM at the Brookhaven National Laboratory (USA) mass measurements were obtained from unstained IF isolated from hair keratin. The data thus obtained show that the number of chains in cross-section is about 30 (+/-3: standard deviation) and is very similar to the numbers determined in previous STEM experiments for the dominant filament type in other classes of IF (about 32). Furthermore, re-analysis of the low-angle equatorial X-ray diffraction pattern reveals, in contrast to earlier work, solutions that are compatible with the number of chains in cross-section indicated by the STEM data. The absence of the head-to-tail overlap between parallel molecules characteristic of most of IF may be compensated in hard alpha-keratin by a network of intermolecular disulfide bonds. It is concluded that native IF of hard alpha-keratin and desmin/vimentin--and probably many other kinds of IF as well--contain about 32 chains in cross-section, and that the axial structures of these various kinds of IF differ in small but significant ways, while generally observing the same basic modes of aggregation.

Animals↗

PubMed1997

The making and breaking of symmetry in virus capsid assembly: glimpses of capsid biology from cryoelectron microscopy.

Virus capsids constitute a diverse and versatile family of protein-bound containers and compartments ranging in diameter from approximately 200 A (mass approximately 1 MDa) to >1500 A (mass>250 MDa). Cryoelectron microscopy of capsids, now attaining resolutions down to 10 A, is disclosing novel structural motifs, assembly mechanisms, and the precise locations of major epitopes. Capsids are essentially symmetric structures, and icosahedral surface lattices have proved to be widespread. However, many capsid proteins exhibit a remarkable propensity for symmetry breaking, whereby chemically identical subunits in distinct lattice sites have markedly different structures and packing relationships. Temporal differences in the conformation of a given subunit are also manifested in the large-scale conformational changes that accompany capsid maturation. Larger and more complex capsids, such as DNA bacteriophages and herpes simplex virus, are formed not by simple self-assembly, but under the control of tightly regulated programs that may include the involvement of viral scaffolding proteins and cellular chaperonins, maturational proteolysis, and conformational changes on an epic scale. In addition to its significance for virology, capsid-related research has implications for biology in general, relating to the still largely obscure assembly processes of macromolecular complexes that perform many important cellular functions.

Antigens, Viral↗

PubMed1997

Hexon-only binding of VP26 reflects differences between the hexon and penton conformations of VP5, the major capsid protein of herpes simplex virus.

VP26 is a 12-kDa capsid protein of herpes simplex virus 1. Although VP26 is dispensable for assembly, the native capsid (a T=16 icosahedron) contains 900 copies: six on each of the 150 hexons of VP5 (149 kDa) but none on the 12 VP5 pentons at its vertices. We have investigated this interaction by expressing VP26 in Escherichia coli and studying the properties of the purified protein in solution and its binding to capsids. Circular dichroism spectroscopy reveals that the conformation of purified VP26 consists mainly of beta-sheets (approximately 80%), with a small alpha-helical component (approximately 15%). Its state of association was determined by analytical ultracentrifugation to be a reversible monomer-dimer equilibrium, with a dissociation constant of approximately 2 x 10(-5) M. Bacterially expressed VP26 binds to capsids in the normal amount, as determined by quantitative sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Cryoelectron microscopy shows that the protein occupies its usual sites on hexons but does not bind to pentons, even when available in 100-fold molar excess. Quasi-equivalence requires that penton VP5 must differ in conformation from hexon VP5: our data show that in mature capsids, this difference is sufficiently pronounced to abrogate its ability to bind VP26.

Capsid↗

PubMed1996

Six-fold rotational symmetry of ClpQ, the E. coli homolog of the 20S proteasome, and its ATP-dependent activator, ClpY.

ClpQ (HslV) is a homolog of the beta-subunits of the 20S proteasome. In E. coli, it is expressed from an operon that also encodes ClpY (HslU), an ATPase homologous to the protease chaperone, ClpX. ClpQ (subunit Mr 19,000) and ClpY (subunit Mr 49,000) were purified separately as oligomeric proteins with molecular weights of approximately 220,000 and approximately 350,000, respectively, estimated by gel filtration. Mixtures of ClpY and ClpQ displayed ATP-dependent proteolytic activity against casein, and a complex of the two proteins was isolated by gel filtration in the presence of ATP. Image processing of negatively stained electron micrographs revealed strong six-fold rotational symmetry for both ClpY and ClpQ, suggesting that the subunits of both proteins are arranged in hexagonal rings. The molecular weight of ClpQ combined with its symmetry is consistent with a double hexameric ring, whereas the data on ClpY suggest only one such ring. The symmetry mismatch previously observed between hexameric ClpA and heptameric ClpP in the related ClpAP protease is apparently not reproduced in the symmetry-matched ClpYQ system.

ATP-Dependent Proteases↗

PubMed1996

Assembly of the herpes simplex virus capsid: characterization of intermediates observed during cell-free capsid formation.

The herpes simplex virus-1 (HSV-1) capsid is an icosahedral shell approximately 15 nm thick and 125 nm in diameter. Three of its primary structural components are a major capsid protein (VP5; coded by the UL19 gene) and two minor proteins, VP19C (UL38 gene) and VP23 (UL18 gene). Assembly of the capsid involves the participation of two additional proteins, the scaffolding protein (UL26.5 gene) and the maturational protease (UL26 gene). With the goal of identifying morphological intermediates in the assembly process, we have examined capsid formation in a cell-free system containing the five HSV-1 proteins mentioned above. Capsids and capsid-related structures formed during progressively longer periods of incubation were examined by electron microscopy of thin-sectioned specimens. After one minute, 90 minutes and eight hours of incubation the structures observed, respectively, were partial capsids, closed spherical capsids and polyhedral capsids. Partial capsids were two-layered structures consisting of a segment of external shell partially surrounding a region of scaffold. They appeared as wedges or angular segments of closed spherical capsids, the angle ranging from less than 30 degrees to greater than 270 degrees. Partial capsids are suggested to be precursors of closed spherical capsids because, whereas partial capsids were the predominant assembly product observed after one minute of incubation, they were rare in reactions incubated for 45 minutes or longer. Closed spherical capsids were highly uniform in morphology, consisting of a closed external shell surrounding a thick scaffold similar in morphology to the same layers seen in partial capsids. In negatively stained specimens, closed spherical capsids appeared round in profile, suggesting that they are spherical rather than polyhedral in shape. A three-dimensional reconstruction computed from cryoelectron micrographs confirmed that closed spherical capsids are spherical with T = 16 icosahedral symmetry. The reconstruction showed further that, compared to mature HSV-1 capsids, closed spherical capsids are more open structures in which the capsid floor layer is less pronounced. In contrast to closed spherical capsids, polyhedral capsids exhibited distinct facets and vertices, indicating that they are icosahedral like the capsids in mature virions. Upon incubation in vitro, purified closed spherical capsids matured into polyhedral capsids, indicating that the latter arise by angularization of the former. Partial capsids, closed spherical capsids and polyhedral capsids were all found to contain VP5, VP19C, VP23, VP21 and the scaffolding protein; the scaffolding protein being predominantly in the immature, uncleaved form in all cases. Polyhedral capsids and closed spherical capsids were found to differ in their sensitivity to disruption at 2 degrees C. Closed spherical capsids were disassembled while polyhedral capsids were unaffected. Our results suggest that HSV-1 capsid assembly begins with the partial capsid and proceeds through a closed, spherical, unstable capsid intermediate to a closed, icosahedral form similar to that found in the mature virion. Structures resembling HSV-1 partial capsids have been described as capsid assembly intermediates in Salmonella typhimurium bacteriophage P22. HSV-1 capsid maturation from a fragile, spherical state to a robust polyhedral form resembles the prohead maturation events undergone by dsDNA bacteriophages including lambda, T4 and P22. Because of this similarity, we propose the name procapsid for the closed spherical capsid intermediate in HSV-1 capsid assembly.

Capsid↗

PubMed1996

The herpes simplex virus procapsid: structure, conformational changes upon maturation, and roles of the triplex proteins VP19c and VP23 in assembly.

The proteins coded by the five major capsid genes of herpes simplex virus 1, VP5 (gene UL19), VP19c (UL38), VP23 (UL18), pre-VP22a (UL26.5), and pre-VP21 (UL26), assemble into fragile roundish "procapsids", which mature into robust polyhedral capsids in a transition similar to that undergone by bacteriophage proheads. Here we describe the HSV-1 procapsid structure to a resolution of approximately 2.7 nm from three-dimensional reconstructions of cryo-electron micrographs. Comparison with the mature capsid provides insight into the large-scale conformational changes that take place upon maturation. In the procapsid, the elongated protomers (VP5 subunits) make little contact with each other except around the bases of the hexons and pentons, whereas they are tightly clustered into capsomers in the mature state; the axial channels, which are constricted or blocked in the mature capsid, are fully open; and unlike the well observed 6-fold symmetry of mature hexons, procapsid hexons are distorted into oval and triangular shapes. These deformations reveal a VP5 domain in the inner part of the protrusion wall which participates in inter-protomer bonding in the procapsid and is close to the site where the channel closes upon maturation. Remarkably, there are no direct contacts between neighboring capsomers; instead, interactions between them are mediated by the "triplexes" at the sites of local 3-fold symmetry. This observation discloses the mechanism whereby the triplex proteins, VP19c and VP23, play their essential roles in capsid morphogenesis. In the mature capsid, density extends continuously between neighboring capsomers in the inner "floor" layer. In contrast, there are large gaps in the corresponding region of the procapsid, implying that formation of the floor involves extensive remodeling. Inside the procapsid shell is the hollow spherical scaffold, whose radial density profile indicates that the major scaffold protein, pre-VP22a, is a long molecule (> 24 nm) composed of three domains. Since no evidence of icosahedral symmetry is detected in the scaffold, we infer that (unless higher resolution is required) the scaffold may not be an icosahedral shell but may instead be a protein micelle with a preferred radius of curvature.

Antibodies, Monoclonal↗

PubMed1996

Stoichiometry and domainal organization of the long tail-fiber of bacteriophage T4: a hinged viral adhesin.

The long-tail fibers (LTFs) form part of bacteriophage T4's apparatus for host cell recognition and infection, being responsible for its initial attachment to susceptible bacteria. The LTF has two parts, each approximately 70 to 75 nm long; gp34 (140 kDa) forms the proximal half-fiber, while the distal half-fiber is composed of gp37 (109 kDa), gp36(23 kDa) and gp35 (30 kDa). LTFs have long been thought to be dimers of gp34, gp37 and gp36, with one copy of gp35. We have used mass mapping by scanning transmission electron microscopy (STEM), quantitative SDS-PAGE, and computational sequence analysis to study the structures of purified LTFs and half-fibers of both kinds. These data establish that the LTF is, in fact, trimeric, with a stoichiometry of gp34: gp37: gp36: gp35 = 3:3:3:1. Averaged images of stained and unstained molecules resolve the LTF into a linear stack of 17 domains. At the proximal end is a globular domain of approximately 145 kDa that becomes incorporated into the baseplate. It is followed by a rod-like shaft (33 x 4 mm; 151 kDa) which correlates with a cluster of seven quasi repeats, each 34 to 39 residues long. The proximal half-fiber terminates in three globular domains. The distal half-fiber consists of ten globular domains of variable size and spacing, preceding a needle-like end domain (15 x 2.5 nm; 31 kDa). The LTF is rigid apart from hinges between the two most proximal domains, and between the proximal and distal half-fibers. The latter hinge occurs at a site of local non-equivalence (the "kneecap") at which density, correlated with the presence of gp35, bulges asymmetrically out on one side. Several observations indicate that gp34 participates in the sharing of conserved structural modules among coliphage tail-fiber genes to which gp37 was previously noted to subscribe. Two adjacent globular domains in the proximal half-fiber match a pair of domains in the distal half-fiber, and the rod domain in the proximal half-fiber resembles a similar domain in the T4 short tail-fiber (gp12). Finally, possible structures are considered; combining our data with earlier observations, the most likely conformation for most of the LTF is a three-stranded beta-helix.

Amino Acid Sequence↗