Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Trimer assembly”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed1988

Targeting of porin to the outer membrane of Escherichia coli. Rate of trimer assembly and identification of a dimer intermediate.

Porin, a transmembrane protein in the outer membrane of Escherichia coli, exists in a trimeric structure which is not dissociated during sodium dodecyl sulfate-polyacrylamide gel electrophoresis at 25 degrees C. This unusual stability was utilized in the study of the conformational changes which accompany the targeting of porin to the outer membrane. A delay of 16-44 s between completion of synthesis of a monomer and its assembly into a trimer was found from the ratio of monomers to trimers found in exponentially growing cells. Pulse-chase experiments showed that rapid processing of precursor OmpF molecules was followed by assembly into sodium dodecyl sulfate-resistant oligomers with a half-time of 20 s at 30 degrees C. An intermediate in assembly was isolated by immunoprecipitation and sodium dodecyl sulfate-polyacrylamide gel electrophoresis below 10 degrees C and was identified as a metastable dimer.

Bacterial Outer Membrane Proteins↗
PubMed1991

In vitro assembly of the functional porin trimer from dissociated monomers in Pseudomonas aeruginosa.

The molecular weights of monomeric and oligomeric forms of the newly identified porins, protein D2, of the outer membrane of Pseudomonas aeruginosa appeared to be 47,000 and 137,000, respectively, as determined by the light scattering technique. Presence of the trimeric aggregates of the homologous subunits in the intact outer membrane, the liposome membrane, and the non-ionic surfactant were confirmed through cross-linking experiments and immunoblotting techniques. The protein D2 monomers prepared in 0.1% of sodium dodecyl sulfate at 23 degrees C spontaneously reassembled into the trimeric aggregate when the surfactant dropped below critical concentration. The diffusion rates of saccharides and beta-lactam antibiotics through the liposome membranes reconstituted from the reassembled protein D2 trimers were indistinguishable from those of the native protein D2. This study shed some light on the porin trimer assembly as well as on the mechanism of carbapenem diffusion through the protein D2 pores.

Anti-Bacterial Agents↗
PubMed2025

Characterization of the Kaposi's sarcoma-associated herpesvirus terminase complex component ORF29.

Kaposi's sarcoma-associated herpesvirus (KSHV) belongs to the Gammaherpesvirinae subfamily. During the lytic phase of herpesviruses, viral capsids form in the host cell nucleus, and the replicated viral genome is packaged into these capsids. The herpesviral genome is replicated as a precursor head-to-tail concatemer consisting of tandemly repeated genomic units, each flanked by terminal repeats (TRs). The herpesvirus terminase complex packages a single genomic unit into a capsid by cleaving the TRs in the precursor genome. Although the terminase complexes of alpha- and beta-herpesviruses are well characterized, the KSHV terminase complex is poorly understood. KSHV ORF7, ORF67.5, and ORF29 are thought to be components of this complex. We previously reported that KSHV deficient in either ORF7 or ORF67.5 formed immature, soccer ball-like capsids and failed to cleave the TRs, resulting in decreased virion production. Moreover, ORF7 interacted with both ORF29 and ORF67.5; however, ORF29 and ORF67.5 did not interact with each other. Thus, although ORF7 and ORF67.5 are important for KSHV terminase function, the function of ORF29 remains largely unknown. In this study, we constructed an ORF29-deficient KSHV and analyzed its virological properties. ORF29 was found to be essential for virion production and TR cleavage. Numerous immature, soccer ball-like capsids were observed in cells harboring ORF29-deficient KSHV. The N-terminal region of ORF29 was important for its interaction with ORF7, although the full-length ORF29 was required for effective assembly of the KSHV terminase complex. Furthermore, ORF29 preferentially interacted with itself rather than with ORF7. Thus, our data show that ORF29 functions as a fundamental component of the terminase complex.IMPORTANCEBecause the role of ORF29 in the Kaposi's sarcoma-associated herpesvirus (KSHV) terminase complex remains unknown, we constructed ORF29-deficient KSHV. Our results demonstrated that ORF29 functions as a component of the KSHV terminase and is essential for mature capsid formation, terminal repeat (TR) cleavage, and terminase complex assembly. Moreover, ORF29 strongly interacted with itself. In herpes simplex virus 1 (HSV-1), the terminase complex (comprising UL15, UL28, and UL33) forms a trimer, and six such trimers assemble into a hexameric ring. The HSV-1 genome passes through this ring and undergoes TR cleavage and genome packaging into a capsid. The self-interaction of ORF29 may be involved in the multimerization of the terminase complex or in the formation of the KSHV terminase ring.

Herpesvirus 8, Human↗
PubMed1990

RecA protein self-assembly. II. Analytical equilibrium ultracentrifugation studies of the entropy-driven self-association of RecA.

We have investigated the self-association of RecA protein from Escherichia coli by equilibrium ultracentrifugation. Monomeric RecA (Mr = 37,842) was observed in reversible equilibrium with trimers, hexamers and dodecamers in the presence of 1.5 M-KCl, 5 mM-Hepes, 1 mM-EDTA, 2 mM-ATP (pH 7.0) at 1 degrees C. The equilibrium was strongly temperature-dependent, with polymerization being favored as the temperature was raised from 1 degrees C 21 degrees C, and was reversible with respect to temperature. The values of both the standard enthalpy and entropy of self-association were positive, indicating that it is an entropy-driven process under these conditions. In the absence of KCl, in 50 mM-citrate, 5 mM-ATP, 5% (v/v) glycerol (pH 6.0) at 4 degrees C, only small amounts of RecA monomer could be detected, while in 10 mM-Tris-acetate, 10% glycerol (pH 7.5) at 4 degrees C, the smallest species present in significant concentration appeared to be the trimer. The majority of the species observed had molecular weights between 228,000 and 456,000, suggesting dominant stoichiometries of six to 12 monomers per oligomer. At pH 6.0, in the absence of ATP, much larger oligomers containing at least 24 monomers also appeared to be present. The data are consistent with an equilibrium mixture of monomers, trimers, hexamers, dodecamers, 24-mers and higher oligomers, with the distribution of oligomers being dependent on solution conditions. Thermodynamic analysis indicates that these oligomeric species are in reversible equilibrium with each other. It is not certain whether trimers assemble directly into hexamers, or whether disassembly into monomers is a prerequisite for the formation of higher oligomers. The possible role of higher-order RecA oligomers in the formation of RecA nucleoprotein filaments is discussed.

Adenosine Triphosphate↗
PubMed1992

Atomic structure of the cubic core of the pyruvate dehydrogenase multienzyme complex.

The highly symmetric pyruvate dehydrogenase multienzyme complexes have molecular masses ranging from 5 to 10 million daltons. They consist of numerous copies of three different enzymes: pyruvate dehydrogenase, dihydrolipoyl transacetylase, and lipoamide dehydrogenase. The three-dimensional crystal structure of the catalytic domain of Azotobacter vinelandii dihydrolipoyl transacetylase has been determined at 2.6 angstrom (A) resolution. Eight trimers assemble as a hollow truncated cube with an edge of 125 A, forming the core of the multienzyme complex. Coenzyme A must enter the 29 A long active site channel from the inside of the cube, and lipoamide must enter from the outside. The trimer of the catalytic domain of dihydrolipoyl transacetylase has a topology identical to chloramphenicol acetyl transferase. The atomic structure of the 24-subunit cube core provides a framework for understanding all pyruvate dehydrogenase and related multienzyme complexes.

Amino Acid Sequence↗
PubMed1986

Mutations blocking the transport of the influenza virus hemagglutinin between the rough endoplasmic reticulum and the Golgi apparatus.

Mutants ts1 and ts227 of fowl plague virus have a temperature-sensitive defect in the transport of the hemagglutinin from the rough endoplasmic reticulum to the Golgi apparatus. The primary structure of the hemagglutinin of the mutants and of a number of revertants derived from them has been analysed by nucleotide sequencing. The transport block of the hemagglutinin of ts227 can be attributed to a single amino acid exchange. It involves the replacement of aspartic acid at position 457 by asparagine thereby introducing a new glycosylation site which appears to be located in a cryptic position in the lower part of the hemagglutinin stalk. Attachment of carbohydrate to this site is temperature-dependent. At permissive temperature only a small fraction of the monomers (approximately 30%) is glycosylated in this position, whereas at nonpermissive temperature this is the case with all subunits. The data suggest that under the latter conditions the new oligosaccharide interferes by steric hindrance with the trimerization of the hemagglutinin. The hemagglutinin of ts1 has an essential amino acid exchange at position 275 where serine is replaced by glycine. This substitution may increase the flexibility of the molecule in the hinge region between the globular domain and the stalk. The exchange of a conserved glutamic acid residue at position 398 that is involved in the interaction between different monomers contributes also to the structural instability of the ts1 hemagglutinin. These observations support the notion that the transport of the hemagglutinin from the rough endoplasmic reticulum to the Golgi apparatus depends on trimer assembly.

Animals↗
PubMed1992

Thrombospondin 1 and thrombospondin 2 are expressed as both homo- and heterotrimers.

There exist two distinct thrombospondin molecules (designated TSP1 and TSP2) which are encoded by separate genes. TSP1 is a trimeric cell surface and extracellular matrix molecule. Sequence comparison reveals that the 2 cysteines involved in interchain disulfide linkage and trimer assembly in TSP1 are conserved in TSP2 (Laherty, C. D., O'Rourke, K., Wolf, F. W., Katz, R., Seldin, M. F., and Dixit, V. M. (1992) J. Biol. Chem. 267, 3274-3281). Swiss 3T3 fibroblasts express both TSP1 and TSP2, and, therefore, an important question is whether TSP in such cells is expressed as homotrimers or as heterotrimers. We find that Swiss 3T3 cells and epithelial cells transfected with TSP expression vectors express both homo- and heterotrimeric forms of TSP. In addition, homotrimeric TSP2 has a lower affinity for heparin than homotrimeric TSP1. Thus, the heparin affinity of TSP can be modulated by the expression of TSP as homo- or heterotrimers.

3T3 Cells↗
PubMed1987

Role for adenosine triphosphate in regulating the assembly and transport of vesicular stomatitis virus G protein trimers.

We have characterized the process by which the vesicular stomatitis virus (VSV) G protein acquires its final oligomeric structure using density-gradient centrifugation in mildly acidic sucrose gradients. The mature wild-type VSV G protein is a noncovalently associated trimer. Trimers are assembled from newly synthesized G monomers with a t1/2 of 6-8 min. To localize the site of trimerization and to correlate trimer formation with steps in transport between the endoplasmic reticulum (ER) and Golgi complex, we examined the kinetics of assembly of the temperature-sensitive mutant VSV strain, ts045. At the nonpermissive temperature (39 degrees C), ts045 G protein is not transported from the ER. The phenotypic defect that inhibited export from the ER at the nonpermissive temperature was found to be the accumulation of ts045 G protein in an aggregate. After being shifted to the permissive temperature (32 degrees C), the ts045 G protein aggregate rapidly dissociated (t1/2 less than 1 min) to monomeric G protein which subsequently trimerized with the same kinetics as the wild-type G protein. Only trimers were transported to the Golgi complex. Kinetic studies, as well as the finding that trimerization occurred under conditions which block ER to Golgi transport (at both 15 and 4 degrees C), showed that trimers were formed in the ER. Depletion of cellular ATP inhibited both the dissociation of the aggregated intermediate of ts045 G protein as well as the formation of stable trimers. The results indicate that oligomerization of G protein occurs in several steps, is sensitive to cellular ATP, and is required for transport from the ER.

Adenosine Triphosphate↗
PubMed1987

Molecular assembly of the lipoprotein trimer on the peptidoglycan layer of Escherichia coli.

The molecular assembly of the major outer membrane lipoprotein on the peptidoglycan layer was studied using two hybrid genes coding for different OmpF-lipoprotein hybrid proteins. One gene codes for a "lipoprotein" in which the diacylglyceryl cysteine residue is replaced with the Ala-Glu residue of the NH2 terminus of the OmpF protein (hybrid protein I). The other gene codes for the lipid-free "lipoprotein" from which the COOH-terminal lysine residue was further deleted (hybrid protein II). Hybrid protein I existed as a trimer. A significant portion of it was found to be composed of only the free form, which was noncovalently associated with the peptidoglycan layer. The purified hybrid protein I trimer was dissociated into the subunit in the presence of guanidine-HCl and reassociated on dialysis. Both the native and reassociated trimers were bound to the lipoprotein-free peptidoglycan layer. No enhancement of the binding was observed when the reassociation reaction was carried out simultaneously. Hybrid protein II, on the other hand, did not exhibit association with peptidoglycan in both the cellular fractionation and in vitro binding experiments, although it existed as a trimer. It is concluded that 1) the protein domain of the lipoprotein exists as a trimer which is noncovalently as well as covalently associated with the peptidoglycan layer and 2) although the deletion of the COOH terminal lysine residue did not interfere with the trimerization, it interfered with the noncovalent interaction with the peptidoglycan layer.

Cell Membrane↗
PubMed1991

Trimerization of an in vitro synthesized OmpF porin of Escherichia coli outer membrane.

The assembly of outer membrane proteins of Escherichia coli was examined using the OmpF porin as a model. Since this protein is made as a precursor, which is processed to a protein of Mr 37,000 before being assembled into trimers in the outer membrane, we synthesized a modified OmpF, which lacked 16 out of 22 amino acid residues from its signal sequence, in a coupled transcription-translation system. This modified protein resembled the unfolded, monomeric OmpF in its electrophoretic behavior, but much of the protein apparently existed in a more tightly folded conformation as it was recognized by a monoclonal antibody specific to a surface epitope of the native, trimeric OmpF porin. At least some conformers of this protein could be further incorporated into outer membrane or lipopolysaccharide bilayers, and assembled into trimers. The trimers formed were trypsin-resistant and heat-stable in sodium dodecyl sulfate up to 70 degrees C, thus showing the characteristics of the native trimeric protein. These results extend our earlier observation that OmpF monomer secreted by spheroplasts of E. coli can be trimerized in vitro (Sen, K., and Nikaido, H (1990) Proc. Natl. Acad. Sci. U.S. A 87, 743-747) and show that the trimerization can occur, albeit at a low efficiency, with porin monomers synthesized in vitro, presumably not contaminated by membrane fragments or other components of the cell envelope. However, comparison of trimerization efficiency of the nascent in vitro product with that of the same product already exposed to aqueous medium, as well as with that of the spheroplast-secreted product, leads us to the working hypothesis that the trimerization process in intact cells is accelerated either by accessory components or by the conformational changes accompanying the secretion through the cytoplasmic membrane and that the reactions observed in this study represent only part of the physiological process.

Amino Acid Sequence↗
PubMed1986

Assembly of influenza hemagglutinin trimers and its role in intracellular transport.

The hemagglutinin (HA) of influenza virus is a homotrimeric integral membrane glycoprotein. It is cotranslationally inserted into the endoplasmic reticulum as a precursor called HA0 and transported to the cell surface via the Golgi complex. We have, in this study, investigated the kinetics and cellular location of the assembly reaction that results in HA0 trimerization. Three independent criteria were used for determining the formation of quaternary structure: the appearance of an epitope recognized by trimer-specific monoclonal antibodies; the acquisition of trypsin resistance, a characteristic of trimers; and the formation of stable complexes which cosedimented with the mature HA0 trimer (9S20,w) in sucrose gradients containing Triton X-100. The results showed that oligomer formation is a posttranslational event, occurring with a half time of approximately 7.5 min after completion of synthesis. Assembly occurs in the endoplasmic reticulum, followed almost immediately by transport to the Golgi complex. A stabilization event in trimer structure occurs when HA0 leaves the Golgi complex or reaches the plasma membrane. Approximately 10% of the newly synthesized HA0 formed aberrant trimers which were not transported from the endoplasmic reticulum to the Golgi complex or the plasma membrane. Taken together the results suggested that formation of correctly folded quaternary structure constitutes a key event regulating the transport of the protein out of the endoplasmic reticulum. Further changes in subunit interactions occur as the trimers move along the secretory pathway.

Animals↗
PubMed1992

Synthesis and assembly of soybean beta-conglycinin in vitro.

The construction of SP6-derived expression plasmids that encode normal and modified beta-conglycinin subunits is described. With the exception of an additional methionine at their NH2-terminal ends and the lack of glycans, the normal subunits synthesized at the direction of these plasmids corresponded to mature alpha and beta subunits isolated from soybean seeds. The subunits assembled into trimers in vitro that were equivalent in size to those formed in vivo. This result shows that the glycans are not required either for protein folding or oligomer assembly. Subunits produced from other plasmids, which had modifications in a highly conserved hydrophobic region in the COOH-terminal end of the subunits, either did not assemble or assembled at an extremely low rate compared to unmodified subunits. Structural changes at the more hydrophilic NH2-terminal end had mixed effects. Several subunits modified in this region assembled into trimers at rates that were either equal or greater than those for normal alpha subunits. Others assembled less completely than the normal subunits. Our results indicate that the in vitro synthesis and assembly assay will be useful in evaluating structure-function relationships in modified beta-conglycinin subunits. The results also show that structural changes at the NH2-terminal end of the subunits are tolerated to a greater extent than modifications in the hydrophobic conserved region in the COOH-terminal half of the subunits, and this information will be useful in efforts to improve soybean quality.

Amino Acid Sequence↗
PubMed1990

Assembly of coronavirus spike protein into trimers and its role in epitope expression.

The folding and oligomerization of coronavirus spike protein were explored using a panel of monoclonal antibodies. Chemical cross-linking and sedimentation experiments showed that the spike of transmissible gastroenteritis virus is a homotrimer of the S membrane glycoprotein. The spike protein was synthesized as a 175,000-apparent-molecular-weight (175K) monomer subunit that is sensitive to endo-beta-N-acetylglucosaminidase H. Assembly of monomers into a trimeric structure was found to occur on a partially trimmed polypeptide and to be a rate-limiting step, since large amounts of monomers failed to trimerize 1 h after completion of synthesis. Terminal glycosylation of newly assembled trimers, resulting in the biosynthesis of three 220K oligomers, occurred with a half time of approximately 20 min. Monomeric (230K to 240K) processed forms were also observed in cells and in virions. The 175K monomeric form expressed four major antigenic sites previously localized within the amino-terminal half of the S polypeptide chain; however, two classes of trimer-restricted epitopes (borne by three 220K and/or three 175K oligomers) were identified. The S glycoprotein of coronavirus might be a valuable model system for discovering new aspects of the maturation of membrane glycoproteins.

Animals↗
PubMed1985

Genetic analysis of subunit assembly of the tail fiber of bacteriophage T3.

Bacteriophage T3 virions have six tail fibers composed of the product of gene 17 (gp17). Each tail fiber is a trimer of gp17 polypeptide. To characterize the assembly process of the tail fiber, temperature-sensitive (ts) mutants of gene 17 (ts17) were analyzed by SDS-polyacrylamide gel electrophoresis and by extract complementation. Newly synthesized gp17 polypeptide chains matured to SDS-resistant native trimers with a half time of about 7.5 min at 30 degrees. Although all ts17 mutants had similar plating efficiencies at restrictive temperature (41.5 degrees or 42 degrees), they showed different phenotypes. tsNG75, whose mutation was located in the carboxyl-terminal region of gene 17, was defective in trimer assembly at 41.5 degrees. The ts tail fibers formed at 30 degrees lost the ability to attach to the tail upon treatment at 41.5 degrees. There was a change in temperature sensitivity of tsNG75 tail fibers upon attachment to the tail, suggesting that the tail fiber may change conformation after attachment to the tail. tsNG215 and tsNG169, whose mutation sites were located in the amino-terminal region of gene 17, were not defective in the trimer assembly and attachment to the tail at the restrictive temperature. tsNG215 tail fibers formed at 41.5 degrees appear to be aberrant because they were not active in extract complementation and their attachment to fiberless particles resulted in production of noninfectious phage. Tail fibers produced by cells infected with tsNG169 at the restrictive temperature were active in extract complementation. Phage particles were formed in tsNG169-infected cells at the restrictive temperature. These particles were infectious at the permissive temperature and the mutant was non-infectious only if infection was continued at the restrictive temperature. These phenotypic differences exhibited by different gene 17 mutants may indicate the regions within the gene 17 polypeptide that play a role(s) in the folding and assembly of gp17 and in the biological activity of the mature tail fiber.

Electrophoresis, Polyacrylamide Gel↗
PubMed1986

Hexon trimerization occurring in an assembly-defective, 100K temperature-sensitive mutant of adenovirus 2.

Analysis of 100K-defective temperature-sensitive adenovirus mutants confirmed the multifunctional character of the nonstructural, virus-coded 100K protein. In addition to its function in hexon trimerization (altered in H5ts1), and its possible direct or indirect role in hexon transport to nucleus (mutated in H2ts118), genetic and biochemical evidence was presented that 100K play some critical role in the scaffolding process of adenovirus capsid. This function appeared to be defective in H2ts107 and to map between coordinates 69.0 and 69.9, leftward from the H5ts1 lesion (70-73 map units; Arrand, 1978). This corresponded to the central domain of the 100K protein, between amino acid 300 and 400 from the N end. DNA sequencing of cloned fragments of H2ts107 DNA overlapping the mutation revealed two point mutations on the same codon at nucleotide 25,082 and 25,083 (GAC----GCA), corresponding to a nonconservative amino acid change (aspartic acid----alanine) at position 324 in the 100K sequence. 100K of adenovirus 2 wild type (WT) was found to bind in significant amounts to novobiocin-affinity column, and to be coeluted with hexon, penton, IIIa, and cellular topoisomerase II activity, by novobiocin- or ATP-Mg2+-containing buffers. H2ts107 100K also bound to novobiocin column, but the elution pattern differed from that of WT, suggesting some alteration in the affinity of the mutated 100K for novobiocin. The same behavior on affinity column as H2ts107 100K was observed for 90K, a cleavage product of the 100K, found in great abundance in H2ts107 at 39.5 degrees and corresponding to the C-terminal moiety of the 100K molecule. This implied that the "novobiocin-binding" domain of the 100K was not confined at its N terminus, and was altered in the H2ts107 mutant.

Adenoviruses, Human↗
PubMed1990

Dynamic nature of the quaternary structure of the vesicular stomatitis virus envelope glycoprotein.

The envelope glycoprotein (G protein) of vesicular stomatitis virus probably exists in the viral envelope as a trimer of identical subunits. Depending on the conditions of solubilization, G protein may dissociate into monomers. G protein solubilized with the detergent octyl glucoside was shown to exist as oligomeric forms by sedimentation velocity analysis and chemical cross-linking. G protein was modified with either fluorescein isothiocyanate or rhodamine isothiocyanate. Resonance energy transfer between fluorescein and rhodamine labels was observed upon mixing the two labeled G proteins in octyl glucoside. This result provided further evidence that G protein in octyl glucoside is oligomeric and indicated that the subunits are capable of exchange to form mixed oligomers. Resonance energy transfer was independent of G protein concentration in the range examined (10-80 nM) and was not observed when labeled G proteins were mixed with fluorescein or rhodamine that was not conjugated to protein. Resonance energy transfer decreased upon incorporation of G protein into Triton X-100, consistent with sedimentation velocity data that G protein in Triton X-100 is primarily monomeric. Kinetic analysis showed that the subunit exchange reaction had a half-time of about 3 min at 27 degrees C that was independent of G protein concentration. These data indicate that the exchange occurs through dissociation of G protein trimers into monomers and dimers followed by reassociation into timers. Thus, in octyl glucoside, G protein must exist as an equilibrium between monomers and oligomers. This implies that monomers are capable of self-assembly into trimers.

Centrifugation, Density Gradient↗
PubMed1988

Use of electrophoretic techniques in determining the composition of seed storage proteins in alfalfa.

Holoprotein molecular weights and polypeptide composition can be determined for complex mixtures of oligomeric proteins using two-dimensional electrophoretic techniques. The variety of two-dimensional analyses presented here is a reflection of the general usefulness of each method for the identification and characterization of the different classes of seed storage proteins in alfalfa. These techniques can be applied to studies of storage proteins in other seeds as well as non-seed storage proteins. The major seed storage proteins in alfalfa are medicagin (a legumin-like globulin), alfin (a vicilin-like globulin) and a family of lower molecular weight albumins (LMW1-3). These comprise 30%, 10%, and 20%, respectively, of the total extractable protein from cotyledons of mature seeds. Alfin is a heterogeneous oligomeric protein (Mr approximately 150,000) composed of polypeptides ranging in size from Mr 14,000 to 50,000 (alpha 1-alpha 6; 50,000, 38,000, 32,000, 20,000, 16,000 and 14,000, respectively). Medicagin is also a high molecular weight oligomeric protein, but requires high concentrations of salt for solubilisation. It is comprised of a family of individually distinct subunits, each composed of an acidic polypeptide (A1-A9; Mr 49,000 to 39,000) linked via disulphide bond(s) to a basic polypeptide (B1, B2, B3; Mr 24,000, 23,000 and 20,000, respectively). This pairing is highly specific and two families are recognizable on the basis of the B polypeptide (B3 or B1/B2). Subunits (Mr approximately 50,000-65,000) are assembled as trimers (8S) or larger oligomers (12S-15S) in mature seeds. The lower molecular weight albumins (LMW1-3) are acidic (pI less than 6), and consist of sets of disulphide-bonded polypeptides (Mr 15,000 and 11,000).

Amino Acids↗
PubMed1991

The amino terminus of the adenovirus fiber protein encodes the nuclear localization signal.

Using a recombinant vaccinia virus vector, the fiber protein from adenovirus serotype 2 has been expressed in human cells; the protein expressed was correctly assembled into trimers, glycosylated, and transported to the nucleus. Deletion of amino acids 2-5 (KRAR) resulted in accumulation of fiber in the cytoplasm; fusion of the sequence TKRVRL, found at the beginning of Ad7 fiber, to the N-terminus of this mutant restored correct targeting. Changing the charge of amino acids 91 and 92 within another potential targeting sequence (LKKTK to LEETK) had little effect on nuclear targeting. When fused to the N-terminus of beta-galactosidase and expressed in recombinant vaccinia virus, neither MKRARP nor MTKRVRL (from Ad2 and Ad7 fibers, respectively), were sufficient for efficient transport of the hybrid protein to the nucleus; on the other hand, fusions of either MKRARPSEDTF (from Ad2 fiber) or of MKRPRP (a known targeting sequence from the C-terminus of Ad2 E1A proteins) to beta-galactosidase were localized to the nucleus. These results suggest that sequences at the N-terminus of Ad2 and Ad7 fiber are required for correct nuclear targeting.

Adenoviridae↗