Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Surface chemistry”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed2004

Effect of substratum surface chemistry and surface energy on attachment of marine bacteria and algal spores.

Two series of self-assembled monolayers (SAMs) of omega-substituted alkanethiolates on gold were used to systematically examine the effects of varying substratum surface chemistry and energy on the attachment of two model organisms of interest to the study of marine biofouling, the bacterium Cobetia marina (formerly Halomonas marina) and zoospores of the alga Ulva linza (formerly Enteromorpha linza). SAMs were formed on gold-coated glass slides from solutions containing mixtures of methyl- and carboxylic acid-terminated alkanethiols and mixtures of methyl- and hydroxyl-terminated alkanethiols. C. marina attached in increasing numbers to SAMs with decreasing advancing water contact angles (theta(AW)), in accordance with equation-of-state models of colloidal attachment. Previous studies of Ulva zoospore attachment to a series of mixed methyl- and hydroxyl-terminated SAMs showed a similar correlation between substratum theta(AW) and zoospore attachment. When the hydrophilic component of the SAMs was changed to carboxylate, however, the profile of attachment of Ulva was significantly different, suggesting that a more complex model of interfacial energetics is required.

Bacterial Adhesion↗
PubMed1997

Organic surface chemistry on titanium surfaces via thin film deposition.

In order to develop a synthetic strategy for the fine tuning of the interfacial properties of titanium-based implants and implant parts, a thin polymeric film was deposited from ethylene plasma on the surfaces of Ti foils. The intended aim was to further modify the adherent, delamination-resistant organic coating using the techniques of surface modification of polymers to direct interfacial interactions at the metal foil-biological phase interface. In particular, air-plasma treatment and Ce(IV)-induced hydroxyethylmethacrylate grafting, two typical reactions of biomedical polymers surface chemistry, were used to improve cell adhesion or to impart cell resistance to the plasma-coated Ti. Results indicate that a plasma-deposited thin polymeric film effectively can act as a viable substrate for further surface chemical modifications and allow the application of a huge background of surface-modification polymers to metallic devices.

Animals↗
PubMed2004

Myoblast proliferation and differentiation on fibronectin-coated self assembled monolayers presenting different surface chemistries.

Biomaterial surface properties modulate protein adsorption and cell adhesion to elicit diverse cellular responses in biomedical and biotechnological applications. We used alkanethiol self-assembled monolayers presenting well-defined chemistries (OH, CH(3), NH(2), and COOH) to analyze the effects of surface chemistry on myoblast proliferation and differentiation. Surfaces were pre-coated with equivalent densities of fibronectin. C2C12 skeletal myoblasts exhibited surface-dependent differences in cell proliferation (COOH = NH(2) > CH(3) = OH). Myogenin and troponin T gene expression levels were up-regulated on CH(3) and OH surfaces compared to other chemistries. Furthermore, immunostaining for sarcomeric myosin revealed surface chemistry-dependent differences in myogenic differentiation following the pattern OH > CH(3) > NH(2) = COOH. Immunostaining analyses of integrin subunits demonstrated surface chemistry-dependent differences in integrin binding to adsorbed fibronectin. OH and CH(3) surfaces supported selective binding of alpha(5)beta(1) integrin while the COOH and NH(2) functionalities displayed binding of both alpha(5)beta(1) and alpha(V)beta(3) Myogenic differentiation correlated with differences in integrin binding; surface chemistries that supported selective binding of alpha(5)beta(1) displayed enhanced differentiation. Finally, blocking beta(1), but not beta(3), integrins inhibited differentiation, implicating specific integrins in the differentiation process. These results demonstrate that surface chemistry modulates myoblast proliferation and differentiation via differences in integrin binding to adsorbed fibronectin.

Animals↗
PubMed1970

Isolation, characterization, and surface chemistry of a surface-active fraction from dog lung.

A procedure is described for the isolation of a surface-active fraction from dog lung. This material meets the established criteria for pulmonary surfactant. The fraction was shown to contain lipid, protein, and carbohydrate. The predominant lipid present was dipalmitoyl phosphatidylcholine. Surface chemistry studies indicated the surface properties of the fraction could not be explained solely from a consideration of the properties of dipalmitoyl phosphatidylcholine. Electron microscopic studies demonstrated the presence of intact osmiophilic bodies as well as other myelin forms in the surface-active fraction. It is speculated that, in situ, the alveolar lining layer is similar to a structured gel.

Animals↗
PubMed2001

Does surface chemistry affect thrombogenicity of surface modified polymers?

With some exceptions, surface chemistry had little effect on platelet and leukocyte activation, and cell deposition, by scanning electron microscopy after blood exposure and clotting times among a group of 12 unmodified and plasma modified tubings. All materials activated platelets and leukocytes to detectable levels, although some materials increased the value of one activation parameter but not another. Unmodified materials [polyethylene (PE), Pellethane (PEU), latex, nylon, and Silastic] and modified materials (H(2)O plasma treated PE and PEU, CF(4) plasma treated PE, fluorinated PEU, NH(4) plasma treated PEU, polyethylene imine treated PEU, and heparin treated PEU) were characterised by XPS and contact angle. The objective of this project was to define a series of assays for the evaluation of hemocompatibility of cardiovascular devices with a view to clarify the specific requirements of ISO-10993-4, and to define an appropriate screening program for new blood contacting biomaterials. PE, PE--CF(4), PE--H(2)0, PEU--F, latex, and PEU-heparin were the exceptions to the general observations, although each behaved differently. PE proved to be least reactive, whereas PE-CF(4) was most reactive by several assays. Platelet microparticle formation (determined by flow cytometry), PTT, postblood exposure SEM, total SC5b-9, C3a, and platelet and leukocyte loss (cell counts) were able to distinguish differences among these materials, and often, but not always, showed expected correlations.

Biocompatible Materials↗
PubMed2003

Mass spectrometric study of the effects of hydrophobic surface chemistry and morphology on the digestion of surface-bound proteins.

Our previous work has demonstrated that reversed-phase chromatographic micro-beads can be used to capture proteins from complex biological matrices and the surface-bound proteins can be enzymatically digested for protein identification by mass spectrometry (MS). Here we examine the peptides generated from digestion of proteins bound to various types of micro-bead surfaces in order to determine the effects of surface chemistry and surface morphology on the digestion process. Detailed examinations of site cleavages and sequence coverage are carried out for a tryptic digestion of cytochrome c adsorbed on reversed-phase polystyrene divinylbenzene (Poros R2 beads) versus C(18) bonded-phase silica beads. It is shown that although the surface does not completely hinder the digestion of cleavage sites of the protein, the digestion products are clearly different than those obtained from a solution digest. Specifically, a partial digestion results from surface digestion, resulting in a greater number of missed cleavages than a comparable solution digest. Subsequent comparisons of peptide mass maps generated from the digestion of various proteins on surfaces with altering chemistry (C(4), C(8), C(18), and R2 beads), or with different surface morphology, were performed. The results reveal that surface chemistry plays only a minor role in affecting the peptide mass maps, and surface morphology had no noticeable effects on the resulting peptide mass maps. It is also shown that the mass spectrometric detection method used to analyze the digested peptides can significantly influence the information content on cleavage sites and the extent of sequence coverage. The use of a combination of MALDI, LC/off-line MALDI, and LC/ESI MS is demonstrated to be crucial in revealing subtle changes in the peptide mass maps.

Chromatography, High Pressure Liquid↗
PubMed2005

Prediction of TiO2 nanoparticle phase and shape transitions controlled by surface chemistry.

The effects of surface chemistry on the morphology and phase stability of titanium dioxide nanoparticles have been investigated using a thermodynamic model based on surface free energies and surface tensions obtained from first principles calculations. It has been found that surfaces representing acidic and alkaline conditions have a significant influence on both the shape of the nanocrystals and the anatase-to-rutile transition size. The latter introduces the possibility of inducing phase transitions by changing the surface chemistry.

Computer Simulation↗
PubMedDate not supplied

Surface chemistry effects of topographic modification of titanium dental implant surfaces: 2. In vitro experiments.

PURPOSE: To determine, in vitro, cytotoxicity and cell adhesion on 3 different implant surfaces. MATERIALS AND METHODS: All samples had machined surfaces, but they were subjected to different cleaning procedures, which produced 3 different surface chemistries. One of the samples was "as-produced" from the machining tools. The other samples were subjected to partial and total cleaning routines. Cytotoxicity was evaluated using mouse fibroblast cultures, and cell adhesion was evaluated with osteoblast-like SaOS-2 cells. RESULTS: The "as-produced" sample showed a pronounced surface contamination by lubricating oils. For partially and totally cleaned samples, an increasing amount of titanium and a decreasing carbon/titanium ratio was observed as cleaning became more complete. DISCUSSION: Differences in surface chemistry such as those normally found on titanium implant surfaces (see part 1 of this series) can lead to those same effects which, in in vitro experiments, are normally accounted for in terms of surface topography alone. CONCLUSION: Effects related to surface chemistry can operate over and above surface topography, making it impossible, without proper characterization, to make definite statements about the role of topography alone.

Animals↗
PubMed2004

Adsorption of anionic and cationic dyes on activated carbons with different surface chemistries.

The influence of the surface chemical groups of an activated carbon on the removal of different classes of dyes is evaluated. Starting from the same material (NORIT GAC 1240 PLUS), the following treatments were carried out in order to produce a series of samples with different surface chemical properties but with no major differences in their textural properties: oxidation in the liquid phase with 6M HNO(3) and 10 M H(2)O(2) (acid materials) and heat treatment at 700 degrees C in H(2) or N(2) flow (basic materials). The specific micropores volume and mesopores surface area of the materials were obtained from N(2) adsorption equilibrium isotherms at 77K. The surface chemistry was characterised by temperature programmed desorption, by the determination of the point of zero charge (pH(pzc)) and by the evaluation of the acidity/basicity of the samples. Elemental and proximate analyses were also carried out. Equilibrium isotherms of selected dyes (an acid, a basic and a reactive dye) on the mentioned samples were obtained and the results discussed in relation to their surface chemistry. In general, the Langmuir model provided the best fit for the adsorption data. It is shown that the surface chemistry of the activated carbon plays a key role in dye adsorption performance. The basic sample obtained by thermal treatment under H(2) flow at 700 degrees C is the best material for the adsorption of all the tested dyes.

Adsorption↗
PubMed2002

An FTIR study of the surface chemistry of the dynamic Si(100) surface during etching in alkaline solution.

In situ FTIR spectroscopy has been used in the attenuated total reflectance (ATR) mode to investigate the surface chemistry of etching Si(100) surfaces in aqueous KOH. The effect of solution concentration and electrode potential on the Si-H vibrations has been explored and the experimental results compared with density functional theory calculations. In addition. the kinetics of surface passivation of n-Si(100) has been investigated using FTIR spectroscopy.

Journal Article↗
PubMed2006

Statistical demonstration of the relative effect of surface chemistry and roughness on human osteoblast short-term adhesion.

The effects of material composition, surface chemistry or surface topography on cell attachment (short-term adhesion) have been largely studied on bone-derived cells. However, no statistical demonstration of these effects has been performed until now. With this objective, we quantified the attachment after 24 hours of human osteoblasts on pure titanium, titanium alloy and stainless steel substrates presenting 6 different surface morphologies and 2 different roughness amplitude obtained by sand-blasting, electro-erosion, acid etching, polishing and machine-tooling. The coating by a gold-palladium layer of these surfaces allowed determining the relative effect of the surface roughness and of the surface chemistry. By multiple analysis of variance, we demonstrated that neither material composition nor surface roughness amplitude influenced cell attachment except on sandblasted pure titanium substrates. On the contrary, a high significant influence of the process used to produce the surface was observed meaning that the main influent factor on cell attachment could be either the surface morphology or the surface chemistry induced by the process. As the coating of surfaces by a gold-palladium layer decreased significantly the attachment of cells on the majority of substrates, we concluded that attachment is rather influenced by surface chemistry than by surface topography.

Adhesiveness↗
PubMed1996

Kinetics of bone cell organization and mineralization on materials with patterned surface chemistry.

Materials with spatially resolved chemistries (i.e. patterned surfaces) have been used to guide and organize the position of mammalian cells in vitro. A common theme in guiding the spatial distribution of cells has been the use of patterned alkylsiloxanes, where one region contains an aminosilane and the other an alkylsilane. The regions of the aminosilane served as preferential sites for cell attachment and spreading, presumably dependent on the association between cell surface proteoglycans the positively charged amine. In this study, experiments were conducted with patterns of N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS) and dimethyldichlorosilane (DMS) to determine the kinetics of spatial organization of bone-derived cells, and whether initial attachment and spreading affected the rate of matrix mineralization (i.e. bone formation) in extended cultures. The bone cells required the presence of serum or preadsorption of serum proteins to the patterned EDS/DMS surface to organize according to the lithographically defined surface chemistry. Time-lapse video microscopy indicated that cells were randomly distributed over the EDS/DMS surface at the time of plating, but organized on the EDS regions within 30 min. When cultures were extended for 15 and 25 days, the matrix synthesized by the cells was preferentially mineralized on the EDS chemistry. These results demonstrate the ability of surface chemistry modifications to organize cells and form mineralized tissue in vitro. The methods employed should have general value to the engineering of tissues in vitro.

Animals↗
PubMed2005

Integrin binding specificity regulates biomaterial surface chemistry effects on cell differentiation.

Biomaterial surface chemistry has profound consequences on cellular and host responses, but the underlying molecular mechanisms remain poorly understood. Using self-assembled monolayers as model biomaterial surfaces presenting well defined chemistries, we demonstrate that surface chemistry modulates osteoblastic differentiation and matrix mineralization independently from alterations in cell proliferation. Surfaces were precoated with equal densities of fibronectin (FN), and surface chemistry modulated FN structure to alter integrin adhesion receptor binding. OH- and NH(2)-terminated surfaces up-regulated osteoblast-specific gene expression, alkaline phosphatase enzymatic activity, and matrix mineralization compared with surfaces presenting COOH and CH(3) groups. These surface chemistry-dependent differences in cell differentiation were controlled by binding of specific integrins to adsorbed FN. Function-perturbing antibodies against the central cell binding domain of FN completely inhibited matrix mineralization. Furthermore, blocking antibodies against beta(1) integrin inhibited matrix mineralization on the OH and NH(2) surfaces, whereas function-perturbing antibodies specific for beta(3) integrin increased mineralization on the COOH substrate. These results establish surface-dependent differences in integrin binding as a mechanism regulating differential cellular responses to biomaterial surfaces. This mechanism could be exploited to engineer materials that control integrin binding specificity to elicit desired cellular activities to enhance the integration of biomaterials and improve the performance of biotechnological culture supports.

3T3 Cells↗
PubMed2001

The effects of surface chemistry and adsorbed proteins on monocyte/macrophage adhesion to chemically modified polystyrene surfaces.

Monocytes and macrophages play critical roles in inflammatory responses to implanted biomaterials. Monocyte adhesion may lead to macrophage activation and the foreign body response. We report that surface chemistry, preadsorbed proteins, and adhesion time all play important roles during monocyte adhesion in vitro. The surface chemistry of tissue culture polystyrene (TCPS), polystyrene, Primaria, and ultra low attachment (ULA) used for adhesion studies was characterized by electron spectroscopy for chemical analysis. Fibrinogen adsorption measured by (125)I-labeled fibrinogen was the lowest on ULA, higher on TCPS, and the highest on polystyrene or Primaria. Monocyte adhesion on protein preadsorbed surfaces for 2 h or 1 day was measured with a lactate-dehydrogenase method. Monocyte adhesion decreased over time. The ability of preadsorbed proteins to modulate monocyte adhesion was surface dependent. Adhesion was the lowest on ULA, higher and similar on TCPS or polystyrene, and the highest on Primaria. Monocyte adhesion on plasma or fibrinogen adsorbed surfaces correlated positively and linearly to the amount of adsorbed fibrinogen. Preadsorbed fibronectin, immunoglobulin G, plasma, or serum also promoted adhesion compared with albumin preadsorbed or uncoated surfaces. Overall, biomaterial surface chemistry, the type and amount of adsorbed proteins, and adhesion time all affected monocyte adhesion in vitro.

Adsorption↗
PubMed2003

In vivo leukocyte cytokine mRNA responses to biomaterials are dependent on surface chemistry.

An in vivo mouse cage implant system was used to determine whether leukocyte cytokine mRNA responses to implanted biomaterials were dependent on surface chemistry. Surfaces displaying various chemistries (hydrophobic, hydrophilic, anionic, and cationic) were placed into stainless steel cages and implanted subcutaneously. Semiquantitative RT-PCR analyses revealed that hydrophilic surfaces showed a decreased expression of proinflammatory cytokines, IL-6 and IL-8, and pro-wound healing cytokines, IL-10 and TGF-beta by adherent cells, and mRNA levels of the proinflammatory cytokine, IL-1beta, and the pro-wound healing cytokine IL-13 were decreased in surrounding, exudate cells. Cytokine responses by adherent and exudate cells to hydrophobic, anionic and cationic surfaces were similar and indicative of a strong inflammatory response at the earliest time point followed by a wound healing response at later time points. However, no differences in the types or levels of exudate cells for any of the surfaces or the empty cage at each of the respective time points were observed, indicating their respective biocompatibility. These studies identify hydrophilic surface chemistries as having significant effects on leukocyte cytokine responses in vivo by decreasing the expression of inflammatory and wound healing cytokines by inflammatory cells adherent to the biomaterial as well as present in the surrounding exudate.

Animals↗
PubMed2002

Effect of surface chemistries and characteristics of Ti6Al4V on the Ca and P adsorption and ion dissolution in Hank's ethylene diamine tetra-acetic acid solution.

This study examined the influence of chemistries and surface characteristics of Ti6Al4V on the adsorption of Ca and P species and ion dissolution behavior of the material exposed in Hank's solution with 8.0 mM ethylene diamine tetra-acetic acid at 37 degrees C. The variation of chemistries of the alloy and nano-surface characteristics (chemistries of nano-surface oxides, amphoteric OH group adsorbed on oxides, and oxide thickness) was effected by surface modification and three passivation methods (34% nitric acid passivation. 400 degrees C heated in air, and aged in 100 degrees C water). X-ray photoelectron spectroscopy and Auger electron spectroscopy were used for surface analyses. The chemistries of nano-surface oxides in a range studied should not change the capability of Ca and P adsorption. Nor is the capability affected significantly by amphoteric OH group and oxide thickness. However, passivations influence the surface oxide thickness and the early stage ion dissolution rate of the alloy. The rate-limiting step of the rate can be best explained by metal-ion transport through the oxide film, rather than hydrolysis of the film. Variation of the chemistries of titanium alloy alters the electromotive force potential of the metal, thereby affecting the corrosion and ion dissolution rate.

Adsorption↗
PubMedDate not supplied

Osteoblast adhesion on poly(L-lactic acid)/polystyrene demixed thin film blends: effect of nanotopography, surface chemistry, and wettability.

Biomaterial surface characteristics are critical cues that regulate cell function. We produced a novel series of poly(l-lactic acid) (PLLA) and polystyrene demixed nanotopographic films to provide nonbiological cell-stimulating cues. The increase in PLLA weight fraction (phi) in blend solutions resulted in topography changes in spin-cast films from pit-dominant to island-dominant morphologies having nanoscale depth or height (3-29 nm). Lower molecular weight PLLA segregated to the top surface of demixed films, as observed by X-ray photoelectron spectroscopy and secondary ion mass spectroscopy (SIMS). For phi > or = 0.5, the topmost film layer was predominantly filled with PLLA (>96% by SIMS at 20-A depth). Nanotextured substrata stimulated osteoblastic cell adhesion to a greater degree than did flat PLLA (phi = 1), and this effect was more pronounced for nanoisland (phi = 0.7 and 0.9) relative to nanopit topographies (phi = 0.5). Demixed films having relatively lower water contact angles generally enhanced cell adhesion and spreading. Our results reveal that cell adhesion is affected by surface chemistry, topography, and wettability simultaneously and that nanotextured surfaces may be utilized in regulating cell adhesion.

Adhesiveness↗