Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Particulate Matter”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed2005

Evaluation of the NIOSH MWF total particulate matter: thoracic particulate matter conversion factor in a machining environment.

Worker exposures to metalworking fluids were characterized at a plant that produced air compressors. Full-shift, side-by-side air samples (n = 147) were collected and analyzed for total particulate matter, extractable total particulate matter, thoracic particulate matter, and extractable thoracic particulate matter. The thoracic particulate matter geometric mean of 0.32 m/m (3)was below the National Institute for Occupational Safety and Health (NIOSH) recommended exposure limit (REL) of 0.4 mg/m (3). The total particulate matter geometric mean of 0.52 mg/m (3), however, was above 0.5 mg/m (3), the total particulate matter concentration offered as a surrogate REL in the NIOSHCriteria for a Recommended Standard for Occupational Exposure to Metalworking Fluids.[1]Of the 83 total particulate matter results that were at or above smash 0.5 mg/m (3), only 50 (60%) of the corresponding thoracic particulate matter results were at or above 0.4 mg/m (3). These data indicated a conversion factor of 1.65 between thoracic particulate matter and total particulate matter concentrations and 1.40 between thoracic extractable particulate matter and total extractable concentrations. These factors were significantly different from the 1.25 used to compare total particulate matter with thoracic particulate matter concentrations in the NIOSHCriteria Document[1](p < 0.01) and call into question the validity of a universal conversion factor. The authors conclude that thoracic particulate matter exposure assessment should be done directly. In terms of protecting the worker, however, the 1.25 conversion factor appeared to be conservative since each time a total particulate matter result was below 0.5 mg/m (3), its paired thoracic particulate matter measurement was below 0.4 mg/m (3).

Aluminum↗
PubMed2001

Development of monitoring technology for airborne particulate matter.

Particulate matter suspended in the air has adverse effects on human health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulate matter are often filter-based, which indicates some disadvantages because such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basic principle is to electrically charge particles passing through the PM inlet using a corona charger and measure the currents created by charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cup impactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and the charger's efficiency was determined experimentally in terms of Pn, which represents the penetration through the charger, P, times the average charge number acquired by a particle, n, for different particle sizes. The correlation was constructed between the PM 10 (or the PM2.5) mass concentrations and the electrical currents due to particles, which were charged by the diffusion charger.

Air Pollutants↗
PubMed2005

Variations of nitrate and sulfate in the atmosphere on days of high and low particulate matters.

Particulate matters with aerodynamic diameter less than 10 microm (PM10) were collected with high-volume samplers for four periods of consecutive samplings. Each period included a high PM10 (defined as PM10 > or = 110 microg/m3) episode. The concentrations of all ionic species of high PM10 day (HPD) samples were higher than those of low PM10 (defined as PM10 < 110microg/m3) d (LPD) samples. Using the ionic concentrations of HPD samples at each station divided by those of LPD samples at respective stations, the results showed that NO3- increased most from LPD to HPD among the eight ionic species examined. A high mean value (3.15) of NO3-/elemental carbon (EC) ratio of HPD divided by that of LPD indicates that concentration variations due to chemical formation and nonchemical factors apparently were higher than those of the concentration variations due to nonchemical factors alone. The NO3-/SO4(2-) ratio of HPD divided by that of LPD ranged from 1.62 to 3.92 for the four periods. The results indicate that more nitrate than sulfate had formed during high PM10 episodes. Multiple linear regression analysis showed that the percentage of NH4+ associated with nitrate and sulfate decreased and the percentage that could be explained by Ca2+ and Na+ increased on HPD. The reactions of HNO3 and H2SO4 with sea salt particles and with aqueous carbonates on soil particles during HPD were considered the main causes leading to these variations.

Air Pollutants↗
PubMed2002

Transcriptional regulation of the HO-1 gene in cultured macrophages exposed to model airborne particulate matter.

Respirable particulate matter generated during incomplete combustion of fossil fuels may principally target the cells found in the distal region of the lung. This study characterizes some of the effects that a model particulate matter has on the induction of heme oxygenase (HO)-1 in macrophages. HO-1 is a highly inducible stress response gene that has been demonstrated to modulate chemical, physical, and environmental stimuli. Cultured macrophages (RAW 264.7 cells) exposed continuously to a well-defined model of particulate matter (benzo[a]pyrene adsorbed onto carbon black) induced HO-1 gene expression in a time-dependent manner. Likewise, the addition of benzo[a]pyrene-1,6-quinone, a redox cycling metabolite of benzo[a]pyrene, to RAW cells also induced HO-1. This particle-induced gene expression of HO-1 was found to correlate with a corresponding increase in protein levels. Gene regulation studies were performed to delineate the transcriptional regulation of HO-1 after exposure to model particulate matter. Deletional analysis of the HO-1 gene and mutational analysis of activator protein (AP)-1 regulatory element on both distal enhancers demonstrated the importance of this transcriptional factor in mediating HO-1 gene transcription in response to model particulate matter. These results were supported by gel shift analysis demonstrating increased AP-1 binding activity after exposure to particulate matter. In summary, this study demonstrates that model particulate matter enhanced the expression of HO-1. This inductive process may be mediated by AP-1 activation of the regulatory elements on both the 5'-distal enhancers.

5' Flanking Region↗
PubMed2006

A comprehensive particulate matter monitoring system and dosimetry-based ambient particulate matter standards.

A numerical particulate matter (PM) measurement model is developed to characterize and evaluate PM sampling methods. Simulations are conducted using the model to evaluate currently widely used PM samplers, including Federal Reference Method (FRM) samplers. The simulations show that current PM samplers are very vulnerable to both changes in measurement target (i.e., natural variability of particle size distribution) and the sampler's design, manufacturing, and operating conditions, potentially resulting in significant errors in the monitoring data. The numerical model is used in conjunction with two types of commercially available PM monitoring devices to form a Comprehensive Particulate Matter Monitoring System (CPMMS). The first type of device can be any mass-based PM monitor with a well-defined sampling efficiency curve. The second type of device is one capable of measuring particle size distribution with a reasonably good relative accuracy between size categories but not necessarily accurate in measuring absolute mass concentrations. This study shows that CPMMS can produce much higher quality PM monitoring data than the current PM samplers under the same conditions. In addition, unlike past and current PM monitoring data such as total suspended particulates, coarse PM (PM10), fine PM (PM2.5), etc., the CPMMS monitoring data will survive changes in PM regulatory definition. A new concept, dosimetry-based PM metrics and standards, is proposed to define ambient PM level based on the deposition fraction of particles in the human respiratory tract. The dosimetry-based PM metrics is more meaningful because it correlates the ambient PM level with the portion that can be deposited in the respiratory tract without an arbitrary cutoff particle diameter. CPMMS makes dosimetry-based PM metrics and standards feasible.

Air Pollutants↗
PubMed2005

Size distribution and characteristics of chemical components in ambient particulate matter.

Ambient particulate matter and gas in Kyoto were investigated by gravimetric analysis, X-ray fluorescence spectrometry, and ion chromatography in order to clarify their behavior and origin. The size distribution and characteristics of the chemical components in ambient particulates collected on PTFE membrane filters using an Andersen air sampler were examined from August 2001 to April 2004. A four-stage filter pack method was used to sample the atmosphere for the determination of gas (SO2, HNO3, HCl, NH3) and particulate matter (SO42, NO3, Cl-, Na+, K+, Ca2+, Mg2+, NH4+) concentrations from October 2002 to April 2004. The concentration of SPM mass was in the range of 6.7 - 80.2 microg/m3. The size distributions of SPM mass were bimodal, peaking at around 0.65 - 1.1 and 3.3 - 4.7 microm, and 40 - 85% of SPM mass was fine particles (< 2.1 microm). Na, Mg, Al, Si, Ca, Cl, and Fe were mainly present in coarse particles (2.1 to 11.0 microm), while S was present in fine particles. The concentrations of Al, Si, Ca, Mg, and Fe in fine particles increased from March to April in 2002, and those in coarse particulates increased in November 2002 and from March to April in 2004. This may be the effect of the continental yellow sand "Kosa." The differences in the size distributions of Al, Si, Ca, Mg, and Fe in particles may depend on differences in their place of occurrence and course of transport from China to Japan. The concentration of HCl gas was higher than that of particulate chloride ion in summer. Nitric acid gas existed at higher concentrations in summer, but fine particulate nitrate ion was observed in winter. The gaseous-to-fine aerosol nitrate fraction became higher at warmer temperatures. Coarse sulfate was below 10%, and SO2 gas and fine particulate sulfate were above 90%.

Air Pollutants↗
PubMed1998

Effects of two new lubricants on the mutagenicity of scooter exhaust particulate matter.

Scooter exhaust particulate matter, which is known to be mutagenic, has caused heavy air pollution in Shanghai. There are about 400,000 scooters in the city, and the number will not significantly decrease for several years. In order to manage the pollution caused by scooter emissions, many new catalytic instruments and additives were developed. In this paper, the effect of two new lubricants on the emission of scooter exhaust particulate matter was evaluated using gas chromatography/mass spectrometer (GC/MS), in vitro Salmonella/microsomal assay and the in vivo mouse micronucleus assay. The purpose was to learn if these new lubricants could have the ability to reduce the exhausts of particulate matter, and decrease the mutagenicity of exhaust particles. The domestic Jinniao (TN36L) vehicle was chosen as the test vehicle. The results showed that the two new lubricants reduced the emission of scooter exhaust particulate matter, including the quantity of particulate matter and the organic substances adsorbed onto the particles. Compared with the control oil, the two new lubricants reduced the emission of particulate matter by 33% and 36%. When using the two new lubricants, only 20 and 23 kinds of compounds were identified separately in the organic extracts of the exhaust particulate matter by GC/MS, while 45 kinds of compounds were detected in the organic extracts of the exhaust particulate matter when the control oil was used. Mutagenicities of the extracts of scooter exhaust particulate matter were significantly reduced when the two new lubricants were used, including the number of histidine-independent colonies over the background in TA98 with and without S9 mix in the Salmonella test (F2 sample); and the frequencies of bone marrow micronucleated polychromatic erythrocytes in the mouse micronucleus assay (both F1 and F2 samples). These results seem to indicate that these new lubricants can effectively reduce the pollution of scooter exhaust particulate.

Animals↗
PubMed2006

Cytotoxicity and oxidative stress caused by chemicals adsorbed on particulate matter.

Air particulate matter (PM) and bound chemicals are potential mediators for adverse health effects. The cytotoxicity and changes in energy-providing processes caused by chemical compounds bound to PM of different size fractions were investigated in Tetrahymena pyriformis. The PM samplings were carried out using a high volume cascade impactor (6 size fractions between 10 microm and less than 0.49 microm) at three points of La Plata, Argentina: in an industrial area, a traffic-influenced urban area, and a control area. Extracts from respirable particles below 1 mum initiated the highest cytotoxic effects, demonstrating their higher risk. In contrast, an increase on oxygen consumption was observed especially in tests of extracts from particles less than 1 mum from urban and industrial areas. The increase on oxygen consumption could be caused by decoupling processes in the respiratory chain. Otherwise the ATP concentration was increased too, even though to a lower extent. The observed imbalance between oxygen consumption and ATP concentration in exposed T. pyriformis cells may be due to oxidative stress, caused by chemical compounds bound to the particles. Owing to the complexity of effects related to PM and their associated chemical compounds, various physiological parameters necessarily need to be investigated to obtain more information about their possible involvement in human relevant pathogenic processes. As shown here, effects on cell proliferation and on energy-providing processes are suitable indicators for the different impact of PM and adsorbed chemicals from various sampling locations.

Adenosine Triphosphate↗
PubMed2006

Effect of chemical composition on the induction of DNA damage by urban airborne particulate matter.

Airborne particulate matter (PM) contains a large number of genotoxic substances capable of endangering human health. In the present study, we have investigated the ability of chemically characterized water-soluble and organic-soluble fractions of two particle sizes (PM2.5 and PM10) from different regions of Mexico City to induce DNA damage in a human lung epithelial cell line. We also evaluated associations between the physicochemical parameters of the PM and its genotoxicity. The airborne particulate samples were collected from four regions of the city; a HiVol air sampler was used to collect PM10 on glass fiber filters and a tapered element oscillating system coupled to an automatic cartridge collection unit was used to collect PM2.5 on teflon filters. PM mass was determined by gravimetric analysis of the filters. Filters containing PM2.5 and one section of each PM10 filter were agitated either with deionized water to extract water-soluble compound, or with dichloromethane to prepare organic-soluble compounds. The chemical composition of the extracts was determined by ion and gas chromatography and atomic adsorption spectroscopy. A549 human type II alveolar epithelial cells were exposed to different concentrations of the PM2.5 and PM10 extracts, and alkaline single cell gel electrophoresis or the Comet assay was performed to measure DNA damage and repair. These analyses indicated that soluble transition metals and the organic-soluble PM fractions are crucial factors in the DNA damage induced by PM. PM composition was more important than PM mass for producing genotoxicity. The results of this study showed that the constituents of the water-soluble PM extract are more likely to induce DNA damage than the organic compounds.

Air Pollutants↗
PubMed2005

Genotoxicity of size-fractionated samples of urban particulate matter.

Urban particulate matter (UPM) includes particles of size smaller than 10 microm (PM10), which may impact on human respiratory and cardiovascular health. It has been reported previously that PM10 can induce DNA damage. We have collected size-fractionated PM10 at the roadside and measured the induction of DNA damage by different-sized UPM using the alkaline Comet assay and the plasmid strand-break assay. We found that foil disks were more suitable for collecting UPM than quartz fiber filters, as the UPM could be easily extracted from the foil disks and accurately weighed. Using the Comet assay, all size fractions induced DNA damage in A549 lung epithelial cells, with the finer fractions (D50% = 0.65 microm and lower) inducing the most damage. In the plasmid strand-break assay, in which DNA damage is induced by free-radical species generated in solution, the most damage was also induced by the finer fractions, although the finest fraction (D50% < 0.43 microm) did not induce as much damage as D50% = 0.65 and 0.43 microm. When an organic extract of a standard UPM sample was compared to the whole particles and the washed particles in the Comet assay, it was found that around 75% of the damage induced by the whole UPM could be induced by the organic extract. These results show that finer particulates have the greatest ability to induce DNA damage in lung epithelial cells and naked DNA, and that both organic and inorganic components of the UPM contribute to its genotoxic effects.

Air Pollutants↗
PubMed2003

Ecological effects of particulate matter.

Atmospheric particulate matter (PM) is a heterogeneous material. Though regulated as un-speciated mass, it exerts most effects on vegetation and ecosystems by virtue of the mass loading of its chemical constituents. As this varies temporally and spatially, prediction of regional impacts remains difficult. Deposition of PM to vegetated surfaces depends on the size distribution of the particles and, to a lesser extent, on the chemistry. However, chemical loading of an ecosystem may be determined by the size distribution as different constituents dominate different size fractions. Coating with dust may cause abrasion and radiative heating, and may reduce the photosynthetically active photon flux reaching the photosynthetic tissues. Acidic and alkaline materials may cause leaf surface injury while other materials may be taken up across the cuticle. A more likely route for metabolic uptake and impact on vegetation and ecosystems is through the rhizosphere. PM deposited directly to the soil can influence nutrient cycling, especially that of nitrogen, through its effects on the rhizosphere bacteria and fungi. Alkaline cation and aluminum availability are dependent upon the pH of the soil that may be altered dramatically by deposition of various classes of PM. A regional effect of PM on ecosystems is linked to climate change. Increased PM may reduce radiation interception by plant canopies and may reduce precipitation through a variety of physical effects. At the present time, evidence does not support large regional threats due to un-speciated PM, though site-specific and constituent-specific effects can be readily identified. Interactions of PM with other pollutants and with components of climate change remain important areas of research in assessment of challenges to ecosystem stability.

Air Pollutants↗
PubMed2001

A cost-effective weighing chamber for particulate matter filters.

Particulate matter (PM) is a ubiquitous air pollutant that has been receiving increasing attention in recent years due in part to the association between PM and a number of adverse health outcomes, including mortality and increases in emergency room visits and respiratory symptoms, as well as exacerbation of asthma and decrements in lung function. As a result, the ability to accurately sample ambient PM has become important, both to researchers and to regulatory agencies. The federal reference method for the determination of fine PM as PM2.5 in the atmosphere recommends that particle-sampling filters be conditioned and weighed in an environment with constant temperature and relative humidity (RH). It is also recommended that vibration, electrostatic charges, and contamination of the filters from laboratory air be minimized to reduce variability in filter weight measurements. These controls have typically been maintained in small, environmentally controlled "cleanrooms." As an alternative to constructing an elaborate cleanroom, we have designed, and presented in this paper, an inexpensive weighing chamber to maintain the necessary level of humidity control.

Air Pollutants↗
PubMedDate not supplied

The 1998 Baltimore Particulate Matter Epidemiology-Exposure Study: part 1. Comparison of ambient, residential outdoor, indoor and apartment particulate matter monitoring.

A combined epidemiological exposure panel study was conducted during the summer of 1998 in Baltimore, Maryland. The objectives of the exposure analysis component of the 28-day study were to investigate the statistical relationships between particulate matter (PM) and related co-pollutants from numerous spatial boundaries associated with an elderly population, provide daily mass concentrations needed for the epidemiological assessment, and perform an extensive personal exposure assessment. Repeated 24-h integrated PM2.5 (n=394) and PM10 (n=170) data collections corresponding to stationary residential central indoor, individual apartment, residential outdoor and ambient monitoring were obtained using the same sampling methodology. An additional 325 PM2.5 personal air samples were collected from a pool of 21 elderly (65+ years of age) subjects. These subjects were residents of the 18-story retirement facility where residential monitoring was conducted. Mean daily central indoor and residential apartment concentrations were approximately 10 microg/m3. Outdoor and ambient PM2.5 concentrations averaged 22 microg/m3 with a daily range of 6.7-59.3 microg/m3. The slope of the central indoor/outdoor PM2.5 mass relationship was 0.38. The average daily ratio of PM2.5/PM10 mass concentrations across the measurement sites ranged from 0.73 to 0.92. Both the central indoor and mean apartment PM2.5 mass concentrations were highly correlated with the outdoor variables (r>0.94). The lack of traditionally recognized indoor sources of PM present within the facility might have accounted for the high degree of correlation observed between the variables. Results associated with the personal monitoring effort are discussed in depth in Part 2 of this article.

Aged↗
PubMed2004

Chemical characterization of ambient particulate matter near the World Trade Center: elemental carbon, organic carbon, and mass reconstruction.

Concentrations of elemental carbon (EC), organic carbon matter (OM), particulate matter less than 2.5 microm (PM2.5), reconstructed soil, trace element oxides, and sulfate are reported from four locations near the World Trade Center (WTC) complex for airborne particulate matter (PM) samples collected from September 2001 through January 2002. Across the four sampling sites, daily mean concentrations ranged from 1.5 to 6.8 microg/m3 for EC, from 10.2 to 31.4 microg/m3 for OM, and from 22.6 to 66.2 microg/m3 for PM2.5. Highest concentrations of PM species were generally measured north and west of the WTC complex. Total carbon matter and sulfate constituted the largest fraction of reconstructed PM2.5 concentrations. Concentrations of PM species across all sites decreased from the period when fires were present at the WTC complex (before December 19, 2001) to the period after the fires. Averaged over all sites, concentrations decreased by 25.6 microg/m3 for PM2.5, 2.7 microg/m3 for EC, and 9.2 microg/m3 for OM from the fire period to after fire period.

Air Pollutants↗
PubMed1978

Mutagenicity in Salmonella typhimurium mutants of the benzene-soluble organic matter derived from air-borne particulate matter and its five fractions.

Air-borne particulate matter was collected on a filter, then extracted with benzene. The benzene-soluble material was separated into 5 fractions, namely acidic, basic, alipathic, polyaromatic and oxygenated fractions. The mutagenic activities of these fractions were examined with a set of Salmonella typhimurium mutants. The 6 mutants were from the TA1535 series, deep rough strains without excision repair, namely TA100 and TA98 (having a resistance-transfer factor) and the standard strain TA1535, TA1536, TA1537 and TA1538. Linear dose-response curves were obtained for the benzene-soluble organic matter, and its acidic, polyaromatic and oxygenated fractions with strain TA98 and a 9000 X g liver supernatant from both phenobarbital(PB)- and dibenz(a,h)anthracene(DBA)-treated rats. Among the 5 fractions tested, 3 fractions, namely the acidic, polyaromatic and oxygenated, played an important role in the mutagenicity of the benzene-soluble organic matter derived from air-borne particulate matter. The 9000 X g rat-liver supernatant was not required to make the acidic fraction mutagenic.

Air Pollutants↗
PubMed2003

Effect of chelators and reductants on the mobilization of metals from ambient particulate matter.

Ambient urban particulate matter (PM) contains various transition metals. When the PM is inhaled into the lung, not all but some part of metals from the particles might be mobilized to participate in a reaction that can damage various biomolecules, such as DNA and proteins. The dust particle size as well as organic acids may influence the metal mobilization. Thus, the mobilization of the metal from two standard reference materials (SRM; NIST, USA) and urban PM (PM2.5 and PM10) collected in the Seoul area was measured in the presence of artificial or biological chelator with or without reductant. The degree of the mobilization was higher with the artificial or biological chelator than the control with saline. In some cases, a reductant increased the mobilization as much as about 5 times the control without the reductant. Especially, the mobilization of Fe was greatly influenced by the presence of reductants. In general, the degree of the mobilization of the transition metal was higher with PM2.5 than with PM10. Therefore, it is expected that, considering the previously known toxicities of the transition metals, PM2.5 is more damaging to various biomolecules than PM10. The results also suggest that not the total amount but the mobilizable fraction of the metal in the ambient PM should be considered with regard to the toxicity of the urban particulate matter.

Air Pollutants↗