SEARCH · Search PubMed

Results for “Particle measurements”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

207 recordsLinked to original sources

PubMed2026

Reducing state anxiety with alpha-frequency transcranial alternating current stimulation.

BACKGROUND: Anxiety reactivity to acute stress is a transdiagnostic vulnerability factor. We tested whether a single session of alpha-frequency transcranial alternating current stimulation (tACS) targeting the frontoparietal control network reduces stress-evoked state anxiety in healthy adults. METHODS: In a randomized, blinded, sham-controlled study, 42 participants (mean age 58.9 years) completed an acute stress task before and after stimulation. The task was an adapted moving-circles paradigm in which circle collisions triggered a brief aversive event (mild electric shock plus unpleasant noise and a white flash). Active stimulation consisted of 20 min of 10-Hz tACS (2.0 mA/channel; 30-s ramp up/down) delivered via electrodes at F3, P3, Cz, and T7 (0° phase at F3/P3; 180° at Cz/T7). Sham stimulation used the same montage and ramp periods but no sustained current. RESULTS: State anxiety showed a significant Time × Protocol interaction (F(1,35) = 4.22, p = .047): STAI-S decreased after active tACS (Δ = -3.16) but increased slightly after sham (Δ = +1.17). Perceived stress appraisal (SAAS) did not change. Resting-state alpha power at F3/P3 showed no reliable pre-post effects. During the task, left-frontal relative alpha differed by protocol and showed a trend toward larger increases following active tACS. Electrodermal and pupil indices changed across sessions in both groups, with no differential stimulation effects. CONCLUSIONS: A single alpha-tACS session produced a modest, selective reduction in stress-evoked state anxiety, supporting oscillatory neuromodulation as a scalable approach to dampen anxiety reactivity.

Humans↗

PubMed2026

Enhancement of secondary organic aerosol formation from isoprene photooxidation by ammonia.

Ammonia (NH3) can participate in atmospheric secondary organic aerosol (SOA) formation by reacting with organic acids and carbonyl compounds in particle phase, but its influence on the gas phase chemistry remains unclear. This study performed a series of smog chamber experiments to investigate the influence of NH3 on the formation of SOA from isoprene photooxidation by OH radicals. Both gas and particle phase products were measured with a series of state-of- art instruments including a nitrate ion chemical ionization mass spectrometer (nitrate-CIMS) and high-resolution time-of-flight aerosol mass spectrometer (HR-TOF-AMS). Our results showed that in the presence of NH3 SOA in the chamber significantly increased, along with an enhanced oxidation of isoprene. CIMS analysis further showed that NH3 in the chamber homogeneously reacts not only with gas-phase organic acids but also with gaseous low volatility oxygenated organic molecules (OOMs) to generate extremely low volatility and ultralow volatility NH3-OOMs clusters. Quantum chemical calculation showed that NH3 can spontaneously interact with OOMs to form NH3-OOMs clusters by forming hydrogen bonds with RCOOH, R-OOH, and R-OH. These clusters can promote new particles formation and particle growth through nucleation and condensation, directly enhancing the isoprene SOA production with a contribution of 78% to the enhanced SOA. Moreover, the formation of NH3-OOMs clusters also results in more isoprene consumed by OH radicals, indirectly increasing the SOA production with a contribution of 22 % to the enhanced SOA. Our work for the first time clarified a synergetic effect of NH3 on isoprene SOA formation, which should be accounted for by models.

Aerosols↗

PubMed2026

In situ product monitoring in heterogeneous reaction of gaseous trimethylamine on Fe2O3/Fe(NO3)3: Effect of environmental factor and particle property.

Gas-particle reactions represent an important atmospheric heterogeneous transformation process for organic amines (OAs). Environmental factors and particle properties may impact the gas-particle reaction products. Although the products from gas-particle reactions can be monitored by various in situ techniques, related data remain scarce. Here, the interfacial and gaseous products from the reaction of trimethylamine on Fe2O3/Fe(NO3)3 particles under light irradiation with mixed NO2, O2, SO2 and H2O were monitored using in-situ diffuse reflectance Fourier transform infrared spectroscopy and proton transfer reaction time-of-flight mass spectrometry. Dark reaction of gaseous trimethylamine on Fe2O3/Fe(NO3)3 generated two interfacial products types: N-containing ones (CH3NCH2, CH3NO2, (CH3)2NCHO, and CH3N(OH)CHO) and N-free ones (alcohols, aldehydes and acids), both accumulating with reaction progression. Light irradiation and O2 oxidation enhanced formation of these products, while NO2 promoted the production of CH3NO2 and (CH3)2NCHO. H2O and SO2 occupied the active sites of particles to inhibit the formation of all products. Compared to Fe(NO3)3, Fe2O3 showed absolute dominance in contribution to the formation of products. Considering the smaller particle size of Fe2O3 and excess Fe(NO3)3, the physical mixing of them reduced the generation of interfacial products. Furthermore, gaseous products of CH3OH, HCHO, CH3CHO, HCOOH and CH3COOH detection clarified the N-free interfacial products. The presence of Fe(NO3)3 inhibited the formation of HCOOH and favored the formation of CH3CHO in the gas phase. By combining product information with thermodynamic calculations, the heterogeneous reaction pathways of trimethylamine were tentatively proposed. These findings provide a guiding significance for the migration of OAs in real atmospheric environment.

Methylamines↗

PubMed2026

Marine air promotes structural compaction and coating growth of soot aerosols after long-range transport from East Asia.

Soot aerosol, a key global warming contributor, undergoes morphological and chemical transformations during atmospheric transport, particularly in humidified marine environments. This study investigates morphology, mixing state, and aging mechanisms of soot particles collected in the Bohai Sea and Yellow Sea. Transmission electron microscopy analyses reveal that coated soot particles dominate the marine atmosphere, accounting for over 98 % of soot-containing particles, with a mean mixing state index (χ) of 0.83. The fractal dimension (Df) of soot particles is 1.84 ± 0.05 in the Northern Yellow Sea, 1.90 ± 0.08 in the Bohai Sea, and 1.96 ± 0.07 in the Southern Yellow Sea, indicating structural compaction during long-range transport. Correspondingly, the average Dp/Dcore ratios (particle to core size ratio) are 5.3 in the Bohai Sea, 4.2 in the Northern Yellow Sea, and 3.9 in the Southern Yellow Sea. Notably, those ratios are higher in marine environments compared to those observed during continental regional transport from northern to southern China (3.54), suggesting enhanced coating growth in humid marine air. The results highlight the important role of marine atmospheres in accelerating soot aging, which in turn leads to significantly stronger light absorption compared to soot in continental air. Our results highlight the necessity of incorporating compact morphologies, uniform mixing states, and thick coatings into optical models for accurate radiative forcing simulations.

Aerosols↗

PubMed2026

Microplastic contamination in South Asian commercially important seafood: A comprehensive assessment of occurrence, source, and human health risk.

Seafood is a cornerstone of global food security and human nutrition, serving as the primary source of animal protein for more than one-fourth of the global population, with South Asia representing one of the world's fastest-growing seafood-consuming regions. However, escalating microplastic (MP) pollution in marine ecosystems poses an emerging threat to seafood safety and human health, yet a comprehensive regional assessment of MP contamination in South Asian seafood remains lacking. This study presents the first region-wide systematic synthesis of the literature on MP contamination in commercially important seafood across South Asia, integrating occurrence patterns, human exposure assessment, polymer-specific hazard evaluation, and bibliometric analysis to address this critical knowledge gap. The meta-analysis estimated an average microplastic exposure of 145 particles/person/day through seafood consumption in South Asia, with fish contributing the highest intake (121 particles/person/day). The detected polymers were classified into PHI hazard levels I-IV, with polyvinyl chloride (PVC), polyurethane (PU), and polyacrylamide (PAM) representing the highest hazard categories. The mean pollution load index (PLI) was 7.71 (Category I), with crustaceans exhibiting the highest contamination (PLI = 10.07). Polypropylene was the predominant polymer, whereas fragments and blue particles were the most frequently reported microplastic characteristics. These findings provide the first regional baseline for assessing microplastic contamination, polymer-associated hazards, and human exposure through seafood consumption in South Asia, underscoring the need for standardized monitoring and targeted mitigation strategies to safeguard seafood safety and public health.

Animals↗

PubMed2026

Oxidative potential of fresh vs. O₃-aged PM2.5 across urban and rural sources in China.

Fine particulate matter (PM2.5) is a major health risk, yet its impacts are still largely assessed using mass concentration, which does not capture toxicity. Recently, oxidative potential (OP) has emerged as a more relevant metric, reflecting the ability of particles to generate reactive oxygen species. A current challenge, especially in China, is understanding how emission sources and ozone (O3) aging affect PM2.5 toxicity, given that O3 is an increasingly important pollutant there. A work by Ma and co-workers published in J. Environ. Sci. (doi.org/10.1016/j.jes.2024.04.023) addressed this by evaluating the OP of fresh and O3-aged PM2.5 from multiple sources in China using the dithiothreitol (DTT) assay. Biomass burning particles exhibited the highest OP, up to 35 times greater than suburban PM2.5, driven by water-soluble organics and transition metals. While O3 aging generally reduced OP, it also induced complex chemical transformations. These findings highlight that PM2.5 toxicity is dynamic and source-dependent, underscoring the need to move beyond mass-based air quality metrics.

Particulate Matter↗

PubMed2026

Towards microplastic bioremediation: Fungal degradation of pristine and pretreated high-density polyethylene and polystyrene.

Microplastic (MP) contamination has become a significant ecological issue because of its enduring existence in the ecosystem and its possible negative impacts. Therefore, using degrading strategies to eliminate these stubborn polymers has been a subject of scientific research. However, the currently used degradation methods are relatively inefficient. Given the pervasiveness of High-Density Polyethylene (HDPE) and Polystyrene (PS) and their resistance to biodegradability, disposal strategies are critical and must be addressed. This manuscript examines the biodegradation of pristine and UV-treated HDPE and PS MPs by Aspergillus flavus species in minimal growth media over 70 days. The maximum weight loss observed at 70 days for pristine HDPE and PS in sole carbon source (SCS) media was (29.33 ± 0.28) % and (17.67 ± 0.35) %, respectively. Whereas, for UV-treated HDPE and PS MPs, the % weight reduction was (33 ± 0.21) % and (25 ± 0.19) %, respectively. UV-treated MPs exhibited greater weight reduction, as UV induced oxygenated functional groups enhance polymer susceptibility to enzymes, thereby promoting biodegradation. HDPE MPs typically show a higher proportion of particles in the lower size range compared to PS MPs. This assertion was based on the weight loss, particle size distribution, and SEM analysis. Furthermore, chemical changes were evaluated using Fourier transform Infrared Spectroscopy (FTIR) analysis, which also displayed chemical oxidation occurring during biodegradation. Liquid Chromatography-Mass Spectrometry (LC-MS) results indicate that UV pretreatment enhances biodegradability by promoting chain scission. These findings further suggest that this fungus's natural and ubiquitous occurrence in terrestrial and marine environments may actively contribute to MP biodegradation while requiring few nutrients.

Microplastics↗

PubMed2026

Optimization of a niosomal formulation for Quercetin delivery: Comparative effects on growth performance, antioxidant and immune responses, and disease resistance against Streptococcus iniae in rainbow trout (Oncorhynchus mykiss).

Quercetin (QUR) is a flavonoid with antibacterial and antioxidant properties that has been studied for its effects on fish health and the immune system. Due to the low bioavailability of QUR, the present study was primarily aimed at developing a niosomal formulation of QUR to enhance its bioavailability and therapeutic properties. The performance of niosomal QUR was then compared with that of its free form by evaluating their effects on the growth and immune system of rainbow trout, Oncorhynchus mykiss. For this purpose, an optimal QUR-containing niosome was formulated by testing different proportions of cholesterol, surfactant, and stabilizer, and the niosomes were then added to the fish diet. A QUR-free diet and a diet containing QUR-free niosomes (QFN) were considered control groups. Niosomes prepared at low hydrophilic-lipophilic balance (HLB) values showed higher QUR entrapment efficiency (QUR-EE%) (P < 0.01). An increase in the molar ratio of cholesterol to surfactant significantly reduced QUR-EE% (P < 0.05). A surfactant/cholesterol/stabilizer ratio of 1:1:0.1 increased QUR-EE% (P < 0.05). The particle size of the niosomes was also affected by HLB and the surfactant/cholesterol/stabilizer ratio. Low HLB values resulted in smaller particle sizes (P < 0.01). Furthermore, a surfactant/cholesterol/stabilizer ratio of 1:1:0.1 resulted in the smallest niosomal particle size (P < 0.05). The presence of diacetyl phosphate as the stabilizer in the formulation improved the niosomal zeta potential to -40.55 mV. The optimal niosomal formulation (HLB = 6.6; surfactant/cholesterol/stabilizer ratio of 1:1:0.1) remained stable at 2 °C over 10 days of storage, as the niosomal QUR content and size did not show significant changes during this period (P > 0.01). After preparation of the diets containing the optimal niosomal QUR, fish were fed the experimental diets for two months. QUR, in both niosomal and free forms, resulted in better growth performance than the QUR-free diets (P < 0.01). There were no significant differences in growth performance between the free and niosomal forms of QUR; however, 500 mg/kg QUR showed significantly better growth performance than 250 mg/kg QUR (P < 0.01). Although both the niosomal and free forms of QUR enhanced immune and antioxidant components in the fish, the effects of the niosomal form were more significant (P < 0.01). In addition, QUR in both free and niosomal forms reduced fish mortality after challenge with Streptococcus iniae. In conclusion, the results of this study suggest that the niosomal form of QUR has strong potential for improving the immune system of fish and increasing resistance to S. iniae infection.

Animals↗

PubMed2025

Tracking microplastic contamination across seasons in a freshwater reservoir: Evidence from surface water, sediments, and fishes.

Microplastics (MPs) are prevalent contaminants in aquatic environments, posing substantial ecological and health risks. These particles migrate within the different layers of aquatic bodies with time and affect the respective biota. Thus, to get an in-depth understanding of the particles, this current study investigated the seasonal distribution, morphological and chemical characteristics, along with potential ecological and human health impacts in the samples including surface water, sediment, and fish from a drinking water supplying reservoir in eastern India. Across three different seasons, pre-monsoon, monsoon, and post-monsoon samples were collected using optimized methods. Results revealed distinct seasonal trends: MP abundance in surface water peaked during the monsoon (mean: 1.15 MPs/L), while sediment showed the highest concentrations in the pre-monsoon (mean: 596 MPs/kg), indicating temporal accumulation dynamics influenced by runoff, hydrodynamics, and sedimentation. Fish gut analysis confirmed ingestion of MPs across five species, with concentrations ranging from 26 to 100 MPs/kg, depending on feeding habits. The most dominant MP type were fragments, followed by fibers, films, and beads. Polymer analysis via µFTIR identified polyethylene, polypropylene, and polyvinyl chloride as prevalent, with hazard assessments (i.e., Polymer Hazard Index (PHI)) indicating medium to very high ecological risks. Heavy metal association was more dominant in the MPs isolated from sediments than the waterborne MPs. Pollution Load Index (PLI) values were > 1 in most seasons, confirming contamination. Health risk analysis suggested potential exposure through both drinking water and fish consumption. This study emphasizes the need for seasonal monitoring, improved waste management, and mitigation strategies to address MP pollution in freshwater ecosystems.

Microplastics↗

PubMed2026

Flap Versus Tunneling for Horizontal Ridge Augmentation With FDBA and i-PRF: A Randomized Controlled Clinical Trial.

AIM: This study evaluated the efficacy of conventional flap and tunneling techniques for horizontal alveolar ridge augmentation using freeze-dried bone allograft (FDBA) particles combined with injectable platelet-rich fibrin (i-PRF). MATERIALS AND METHODS: Forty-five patients were randomly allocated to one of three groups (n = 15 each): conventional flap (CF), tunneling with membrane (TM), or tunneling without membrane (TnM). Preoperative ridge width was measured via cone beam computed tomography (CBCT). All augmentation procedures incorporated FDBA and i-PRF; an absorbable collagen membrane was applied in the CF and TM groups. Follow-up assessments, including CBCT imaging and histomorphometric analysis, were conducted 6 months postoperatively. For normally distributed data, ANOVA with Tukey's post hoc test and paired samples t-test were applied. Non-normally distributed data were analyzed using Kruskal-Wallis, Mann-Whitney U, and Wilcoxon signed-rank tests. RESULTS: Statistical analysis was performed on 43 patients. All groups demonstrated an increase in ridge width after 6 months. At the 2 mm level, the mean width gain was 1.28 mm (95% CI: 0.17 to 2.40) in the TM group, 2.85 mm (95% CI: 1.80 to 3.89) in the TnM group, and 1.95 mm (95% CI: 1.07 to 2.83) in the CF group. However, statistical analysis revealed no significant intergroup variation (p > 0.05). Histomorphometric assessments similarly demonstrated comparable outcomes across all groups, with no statistically significant differences observed (p > 0.05). CONCLUSION: Within the limitations of this study, the tunneling technique, regardless of membrane use, appears to be a clinically viable alternative to the conventional flap method for horizontal alveolar ridge augmentation. However, further studies with longer follow-up periods are required to substantiate these findings. TRIAL REGISTRATION: irct.behdasht.gov.ir identifier: IRCT 20101204005305N21.

Humans↗

PubMed2026

Thermal analysis techniques for microplastic mass quantification: Methodological challenges and standardization needs.

Microplastics (MPs, 1 μm-5 mm) and nanoplastics (NPs, <1 μm) are ubiquitous contaminants requiring standardized quantification methods. This systematic review evaluates thermal analysis techniques for mass-based MP detection, including pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), thermogravimetry-MS (TGA-MS), thermal extraction desorption-GC-MS (TED-GC-MS), and differential scanning calorimetry (DSC). Database searches (Web of Science, from inception to December 1, 2025) following PRISMA guidelines identified studies across seven environmental matrices (water, soil/sediment, atmosphere, biota, human tissues). We identify critical standardization gaps: inconsistent marker ion selection, unvalidated conversion factors for tire and road wear particles (TRWPs), and the absence of certified reference materials for complex matrices. Py-GC-MS demonstrates versatility but suffers from lipid interference in biological samples; TED-GC-MS offers superior sensitivity (sample capacity ∼200× Py-GC-MS) but lacks real-time chromatographic monitoring. To advance data comparability, we propose: (i) harmonized ion selection hierarchies based on specificity-sensitivity balance, (ii) matrix-specific TRWP quantification protocols, and (iii) inter-laboratory validation using environmental reference materials. This review provides a methodological roadmap for standardizing thermal analysis in MP research.

Humans↗

PubMed2025

Application of causal discovery of factors driving dissolved oxygen in estuarine environments.

Dissolved oxygen (DO) concentrations in estuarine bottom waters are a manifestation of multiple, interacting physical and biogeochemical processes, yet identifying their independent contributions remains challenging. Here, we analyze monthly water quality monitoring data from eight stations across Long Island Sound from 1994 to 2022 using a causal discovery framework (PCMCI+) and transformation of forcing variables. Our goal is to identify and isolate variables that causally influence bottom DO and improve predictive models by minimizing overfitting and multicollinearity. PCMCI+ reveals surface-layer temperature as the most important and consistent negative driver of bottom DO, followed by stratification. Wind events exhibit only brief relief by advection and mixing, while river discharge shows no direct causal link to DO, making it less influential than previously thought. Biogeochemical variables, including chlorophyll-a (Chl-a), nitrate and nitrite, and particulate carbon, influence DO through both contemporaneous and time-lagged pathways, often with signs that shift depending on the process. The derived models were evaluated by comparing skill scores, mean squared error, and Akaike Information Criterion. Both model types perform well, with coefficient of determination values exceeding 0.90 at multiple stations using only 3-5 predictors. Our analysis reveals that the best causal predictors are surface-layer temperature, stratification, Chl-a, and particle carbon. This approach provides a scalable framework for improving prediction models and understanding the mechanistic links that control the seasonal variability of DO in estuarine systems.

Estuaries↗

PubMed2026

Degradation of a graphene-reinforced polyamide by fungi: When culture conditions matter.

The large-scale production, marketing and disposal of polymer-based graphene products can lead to the dispersal of graphene-enriched plastic particles into terrestrial ecosystems, where they might accumulate if not degraded by organisms. The objective of this work is to test the degradability and compatibility of one polyamide-6 polymer reinforced with reduced graphene-oxide (PA6-rGO) and its base constituents (polyamide-6, PA6; reduced graphene oxide, rGO) using mono- and co-cultures of two lignin-degrading fungi (Bjerkandera adusta and Morchella esculenta) grown under different nutrient conditions. Fungal (co-)cultures were exposed to pure rGO or abraded powders of PA6 and PA6-rGO in two different liquid media, and monitored over time for biomass growth, H2O2 production, and activity of two lignolytic enzymes (i.e., Laccase, Lac, and Lignin peroxidase, LiP). The changes in polyamide structure were evaluated by proton nuclear magnetic resonance and mass spectrometry, and changes in rGO were evaluated by Raman spectroscopy. The materials had no effect on fungal growth. PA6 increased Lac secretion only in low nutrient medium, while PA6-rGO slightly suppressed LiP activity. Only M. esculenta promoted polyamides oxidation when cultured in a low nutrient medium, as evidenced by a change in mass distribution values (m/z: 400-420) and the appearance of a new resonance peak (at 5.37 ppm). Lignolytic exudates in co-cultures low in nutrients caused a greater change in rGO, as shown by the increase in the ID/IG ratio. The degradation of rGO, PA6 and PA6-rGO depended on culture conditions.

Graphite↗

PubMed2026

Culture of infectious human norovirus isolated from live contaminated oysters.

Human noroviruses are a major cause of foodborne outbreaks worldwide. Filter-feeding shellfish, such as oysters, can bioaccumulate these viruses in their digestive tissue when grown in sewage-impacted coastal areas and are often implicated in norovirus foodborne outbreaks. Despite the high sensitivity of current molecular assays, these methods for norovirus detection in shellfish fail to distinguish between infectious and non-infectious particles. Assessing norovirus infectivity in shellfish remains a challenge due to the lack of suitable isolation methods that maintain capsid integrity. In this study, a protocol for isolating infectious norovirus from oyster tissues, based on chloroform-butanol elution and polyethylene glycol concentration (CB-PEG), was optimized for the recovery of human norovirus GI and GII. While CB-PEG method recovered various norovirus GI and GII genotypes, it was less efficient at the genomic level than a protocol based on proteinase K elution (adapted from ISO 15216) and showed genotype-dependent viral recovery rates. By optimizing the flocculation step, we improved the method's compatibility with human intestinal enteroid (HIE) cultures. Using this approach, we successfully quantified infectious norovirus GII.3 titers recovered from artificially-contaminated live oysters. Interestingly, infectious virus was better isolated following a freezing step of the digestive tissues, with titers ranging from 13 to 40 TCID50/mL for positive samples. In conclusion, this study established an optimized methodological approach for the relative quantification of infectious norovirus GII.3 in shellfish, paving the way for future research on viral persistence and inactivation strategies in this foodstuff.

Norovirus↗

PubMed2026

Antarctic Peninsula soil carbon stock and efflux: A complex interplay of soil properties and heavy metals.

This study establishes a quantitative framework for understanding surface soil carbon dynamics and ecosystem connectivity in Fildes Peninsula and Ardley Island, King George Island, South Shetland Islands, Antarctic Peninsula. The mean soil organic carbon (SOC) stock across all study sites was 1.10 ± 1.93 kg C/m². Restricting net carbon balance analysis to Fildes Peninsula, where soil respiration (Rs) data were available, yielded a site-specific SOC stock of 0.45 ± 0.45 kg C/m². Scaling Rs to a realistic 120-day active season and assuming stable SOC stocks resulted in estimated annual carbon loss of 15 g C/(m2·yr), equivalent to 3.3 % of standing SOC. Comprehensive sensitivity analyses spanning plausible winter respiration (0 %-20 % of summer rates) and annual change in SOC stocks (-1 %-2 %) consistently supported a net carbon sink, with turnover rates constrained to 3.3 %/yr-4.7 %/yr. Principal component analysis showed that ornithogenic processes as the dominant control on SOC, total nitrogen (TN), zinc (Zn), copper (Cu), and cadmium (Cd) provide a clear multivariate signature of marine-derived nutrient, while Pb was decoupled from this gradient and associated instead with fine-particle size controls. These results reveal dual but independent drivers of soil metal enrichment in this region. Despite their limited spatial extent, ornithogenic soils store disproportionately large carbon pools. Overall, this integrated analysis reveals how marine-terrestrial subsidies regulate Antarctic carbon cycling and provides a quantitative and reproducible framework for assessing carbon dynamics under ongoing climate change.

Antarctic Regions↗

PubMed2026

A versatile reversed-phase liquid chromatography charged aerosol detection method for streamlined monitoring of QS-21 content and stability in liposomal adjuvant formulations.

Identifying and quantifying an active adjuvant along with its degradants in drug formulations is essential for ensuring the safety and efficacy of the drug product. QS-21 is a potent adjuvant that is being evaluated in several clinical trials and is currently formulated in licensed vaccines that protect against shingles, malaria, and RSV. In aqueous environments, QS-21 is subject to hydrolytic degradation that is influenced by pH and temperature, resulting in the formation of a degradant known as QS-21 Hydrolyzed Product, QS-21 HP, which can occur during manufacturing and/or prolonged storage. The intact QS-21 and QS-21 HP induce distinct immune response profiles, making it critical to monitor the degradation of QS-21 in vaccine adjuvant formulations. To date, there has been a paucity of reliable assays for QS-21, its isomers, and degradant QS-21 HP in liposomal adjuvant formulations available that can be transferred seamlessly in quality control (QC) environments. Herein, we introduce a simple and QC-friendly liquid chromatography coupled to a charged aerosol detector (LC-CAD) enabled by stationary phase screening combined with in silico method development optimization. The method exploits 2.7 μm fused-core phenyl hexyl particles, ensuring its versatility in standard and ultra-high pressure LC systems. This approach demonstrates a high correlation between predicted retention time (RT) and experimental outcomes with overall ∆RT < 4%. In addition, this assay shows great linearity, precision, specificity, and accuracy to advance process development characterization of new vaccine formulations.

Liposomes↗

PubMed2026

Developing low-carbon metered-dose inhalers: effects of propellant HFA-152a on mucociliary clearance and bronchoconstriction in two Phase 1 randomised trials.

BACKGROUND: To reduce the impact of respiratory care on climate change, metered-dose inhalers (MDIs) are being reformulated with low-global warming potential (GWP) propellants. Next-generation propellant hydrofluoroalkane (HFA)-152a has >90% lower GWP than HFA-134a. As part of the safety evaluation for HFA-152a, mucociliary clearance (MCC), bronchoconstriction and safety were compared with HFA-134a. METHODS: Two Phase 1, randomised, two-way crossover studies (NCT06506266/NCT06702462) were conducted. MCC study: healthy participants inhaled HFA-152a and HFA-134a in two 7-day sequences. MCC was quantified as area under radiolabelled particle retention time curve over 4 h (AUC0-4h) after nebulised 99mTc sulphur colloid, following each propellant. Bronchoconstriction study: patients with mild asthma inhaled single doses of HFA-152a and HFA-134a. Non-inferiority of HFA-152a versus HFA-134a was defined as percent change in FEV1 (litres), 15 min post dose (95% confidence intervals [CI]: lower limit >-10%, upper limit >0%). Both studies assessed safety. RESULTS: In 22 healthy participants, the impact on MCC did not differ between HFA-134a and HFA-152a (AUC0-4h geometric mean ratio [90% CI]: 1.00 [0.99, 1.01]). In 19 patients with mild asthma, neither HFA-152a nor HFA-134a induced bronchoconstriction (percent change in FEV1 at 15 min: -0.37% [HFA-152a] vs -0.60% [HFA-134a]); HFA-152a was non-inferior to HFA-134a (mean difference [95% CI]: 0.23% [-3.61, 4.07]). Adverse event (AE) rates were low and similar for both propellants in both studies; all AEs were mild, with no serious AEs or deaths. CONCLUSION: HFA-152a and HFA-134a had almost identical effects on MCC, neither induced bronchoconstriction, supporting MDI reformulation with the low-GWP propellant HFA-152a.

Humans↗

PubMed2026

A STORM-based protocol for nanoscale imaging and quantitative analysis of protein-associated and phospholipid-associated structures in natural rubber.

Stochastic Optical Reconstruction Microscopy (STORM) enables nanoscale mapping of molecular components beyond the diffraction limit; however, its reproducible implementation in hydrophobic polymer matrices remains challenging because fluorescence-labeling specificity, fluorophore photoswitching, three-dimensional localization, chromatic registration, and quantitative image analysis must be carefully controlled. This protocol presents a standardized experimental workflow for dual-color labeling, astigmatism-based three-dimensional STORM acquisition, and quantitative analysis of protein-associated and phospholipid-associated structures in natural rubber (NR). The workflow covers sample pretreatment, Cy5 NHS ester labeling of protein-associated primary amines, DiI labeling of phospholipid-rich domains, STORM imaging-buffer preparation, three-dimensional single-molecule localization, dual-channel registration, generation of standardized xy projections, aggregate-size analysis, and projected lateral spatial correlation assessment. Reproducibility is supported by defined acquisition and localization criteria, three independent sample preparations with at least five fields of view analyzed per condition, and unlabeled, single-color, dye-only matrix, and processing-associated Cy5 controls. Mean lateral localization precisions of 11.8 ± 2.3 nm for Cy5 and 13.5 ± 2.9 nm for DiI were obtained, while two-dimensional Fourier ring correlation analysis of the xy projections yielded effective lateral image resolutions of approximately 25 and 28 nm, respectively. Image-based particle segmentation and localization-coordinate-based density-based spatial clustering of applications with noise (DBSCAN) were applied to standardized xy projections as complementary quantitative approaches. Application of the protocol to untreated, centrifuged, and protease-treated NR samples demonstrated treatment-associated changes in the detected abundance and projected size distributions of protein- and phospholipid-associated aggregates, together with a non-monotonic change in their projected lateral spatial correlation. These observations describe alterations in nanoscale organization but do not, by themselves, establish stable protein-phospholipid complex formation. Unlike previous studies that primarily demonstrated the feasibility of STORM imaging in rubber materials, the principal contribution of this work is an end-to-end, step-by-step protocol incorporating defined controls, three-dimensional localization, image-quality metrics, chromatic-registration procedures, and complementary quantitative-analysis pipelines for non-expert users. The workflow may be adaptable to other hydrophobic polymers and soft-material systems after appropriate optimization and validation.

Rubber↗