Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Mucor”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

Isolation of Mucor circinelloides from a case of ulcerative mycosis of platypus (Ornithorhynchus anatinus), and a comparison of the response of Mucor circinelloides and Mucor amphibiorum to different culture temperatures.

The fungus Mucor circinelloides was isolated from a platypus (Ornithorhynchus anatinus) suffering from ulcerative mycosis. On horse blood agar at 20, 25 and 30 degrees C, the fungus formed sphaerule-like bodies, a morphology previously associated with Mucor amphibiorum, the species thought to be responsible for the disease in platypus. A biopsy taken from the ulcer was fixed, cut and stained. The sections were compared with sections taken from other platypuses suffering from ulcerative mycosis, and from which M. amphibiorum had been isolated. There were no discernible differences between the sphaerule-like bodies found in any of the sections. The presence of sphaerule-like bodies in tissues of ulcerated animals can, therefore, probably no longer be relied upon as a definitive method for the diagnosis of M. amphibiorum infection. It is possible that M. circinelloides is either a primary or a secondary pathogen of platypuses, and further work is required to resolve this point. The isolate of M. circinelloides grew at temperatures up to 38 degrees C, with an optimum temperature for growth of 30 degrees C. Of six isolates of M. amphibiorum derived from both platypus and amphibians, two grew well at 38 degrees C. The growth of one of these isolates at elevated temperatures may be explained by the hot climate of the area in Queensland in which it was found. All of the isolates tested had maximum temperatures for growth in excess of the body temperature of platypuses (32 degrees C).

Animal Diseases↗

Secretion of Mucor rennin, a fungal aspartic protease of Mucor pusillus, by recombinant yeast cells.

The aspartic protease gene of a zygomycete fungus Mucor pusillus was expressed in Saccharomyces cerevisiae under the control of the yeast GAL7 promoter. A putative preproenzyme with an NH2-terminal extension of 66 amino acids directed by the gene was processed in yeast cells and the mature enzyme, whose NH2-terminus was identical to that of the Mucor enzyme, was efficiently secreted into the medium at a concentration exceeding 150 mg/l. The enzyme secreted from the recombinant yeast was more glycosylated than the native Mucor enzyme but its enzymatic properties were almost identical with those of the native enzyme, which has been used as a milk coagulant in cheese manufacture.

Amino Acid Sequence↗

Secretion by yeast of the zymogen form of Mucor rennin, an aspartic proteinase of Mucor pusillus, and its conversion to the mature form.

The Mucor rennin gene encoding a prepro-form of the fungal aspartic proteinase from Mucor pusillus was expressed under the control of the yeast GAL7 promoter in Saccharomyces cerevisiae. An inactive zymogen of the enzyme with the 44-amino-acid pro-sequence was identified in the medium during the initial stage of cultivation. Processing of the purified zymogen to the mature enzyme proceeded autocatalytically under the acidic conditions. The rate of processing was accelerated by an increase in the concentration of the zymogen or addition of the mature enzyme. The in vitro processing was inhibited by inhibitors for the aspartic proteinases. The zymogen with no proteinase activity due to a mutation at the active site residue, Asp, was still processed at a relatively slower rate in a wild-type strain of yeast, but no processing occurred in the pep4-3 mutant strain of S. cerevisiae deficient in yeast proteinase A. Thus, Mucor rennin is excreted in a form of zymogen, which is then processed in the yeast secretion pathway mainly by the autocatalytic proteolysis but, alternatively, by a proteinase of yeast.

Amino Acid Sequence↗

Possible differences in pathogenicity between cane toad-, frog- and platypus-derived isolates of Mucor amphibiorum, and a platypus-derived isolate of Mucor circinelloides.

Platypuses (Ornithorhynchus anatinus) in the north of the island state of Tasmania, Australia, suffer from a serious disease called ulcerative mycosis, which is responsible for high morbidity and, presumably, mortality rates in areas where it occurs. The disease is caused by the dimorphic fungus Mucor amphibiorum, which is also found in Queensland, New South Wales and Victoria. However, it does not cause disease in platypuses in those states. It has been previously reported that a closely related fungus, Mucor circinelloides, may also be capable of causing this disease. This paper describes pathogenicity trials involving cane toads (Bufo marinus) as the experimental model. The toads were infected with either Tasmanian, platypus-derived M. amphibiorum, West Australian, frog-derived M. amphibiorum, Queensland cane-toad-derived M. amphibiorum or Tasmanian platypus-derived M. circinelloides. The Tasmanian isolates of M. amphibiorum were more likely to cause a serious, long-term infection than were Queensland or West Australian isolates, and (+) mating types caused a more serious infection than the (-) mating type. The isolate of M. circinelloides was incapable of infecting the toads, lending further weight to the theory that it represents an environmental contaminant. The results suggest that an endemic strain of M. amphibiorum has mutated and become pathogenic to platypuses. Alternatively, a pathogenic strain of M. amphibiorum may have been introduced into Tasmania, where it is infecting a naïve population.

Animals↗

Cloning and sequencing of a gene for Mucor rennin, an aspartate protease from Mucor pusillus.

The aspartate protease of Mucor pusillus (Mucor pusillus rennin; MPR) is a milk-clotting enzyme used in the cheese industry. The partial amino acid sequence of MPR was determined and oligonucleotide probes were synthesized for cloning of the MPR gene. A clone giving positive hybridization with the probes was selected from the cosmid library. Sequencing of the cloned DNA revealed an open reading frame of 1281 bp without introns which encodes 361 amino acids for the expected MPR with an NH2-terminal extension of 66 amino acids. MPR seems to be synthesized as a prepro enzyme.

Amino Acid Sequence↗

Effect of medium components and time of cultivation on chitin production by Mucor circinelloides (Mucor javanicus IFO 4570) -- a factorial study.

Chitin production of mycelia from Mucor circinelloides (Mucor javanicus) was studied with a two-level factorial design in all combinations of the following factors in the culture medium: time of cultivation, concentration of D-glucose, L-asparagine and thiamine. Chitin was characterised by infrared and nuclear magnetic resonance spectroscopy. The four factors showed statistically significant (95%) positive main effects on chitin production, without interactions between them. The highest chitin yield (23.9%) was obtained with the medium containing 60 g/l of glucose, 3 g/l of asparagine and 0.008 mg/l of thiamine and is comparable to the highest in the literature.

Asparagine↗

Effects of glycosylation on the secretion and enzyme activity of Mucor rennin, an aspartic proteinase of Mucor pusillus, produced by recombinant yeast.

The Mucor rennin gene encoding a prepro form of the fungal aspartic proteinase from Mucor pusillus was expressed under the control of the yeast GAL7 promoter in Saccharomyces cerevisiae. The mature M. pusillus rennin secreted efficiently by yeast was a highly glycosylated protein. Analysis by a combination of site-directed mutagenesis of each of the three possible glycosylation sites and treatment of the secreted M. pusillus rennins with endo-beta-N-acetylglucosaminidase H revealed that the mature yeast M. pusillus rennin contained two asparagine-linked glycosylation sites among the three possible glycosylation sites. A mutation of the 2 glycosylated asparagine residues of M. pusillus rennin resulted in significant decreases in the level of secretion by yeast cells. In addition, the extent of glycosylation of M. pusillus rennin was found to affect the enzyme properties such as milk-clotting and proteolytic activities.

Acetylglucosaminidase↗

Kinetic studies on the action of Mucor pusillus, Mucor miehei acid proteases and chymosins A and B on a synthetic chromophoric hexapeptide.

The action of two milk-clotting fungal proteases from Mucos pusillus and Mucor miehei and of chymosins A and B on the hexapeptide, Leu-Ser-Phe(NO2)-Nle-Ala-Leu-OMe, and on kappa-casein were studied. The effects of pH and temperature on the initial rates of hydrolysis of the hexapeptide were examined. Crystalline chymosin and M. pusillus protease exhibited optimal activities around 49 and 55 degrees C, respectively, whereas the optimum temperature for M. miehei protease is higher than 63 degrees C. The optimum pH was about 4.7 for both fungal proteases whereas chymosin A and chymosin B exhibited optimal activities around 4.2 and 3.7, respectively. Kinetic parameters were then determined under optimal conditions and/or at pH 4.7. Fungal proteases had kcat/Km ratios that were similar to each other and that were significantly greater than the ratios obtained for the chymosins. Nevertheless, chymosins had much greater clotting activities towards kappa-casein relative to their proteolytic activities towards the synthetic peptide.

Caseins↗

Milk-clotting Enzyme from Microorganisms: V. Purification and Crystallization of Mucor Rennin from Mucor pusillus var. Lindt.

A rennin crystal was obtained from the crude milk-clotting enzyme of Mucor pusillus var. Lindt. The crude enzyme was purified by using columns of Amberlite CG-50, diethylaminoethyl Sephadex A-50, and Sephadex G-100. This purified enzyme was dissolved in 0.1 M sodium acetate (pH 5.0) buffer to a final concentration of 2 to 3%; ammonium sulfate (to 40% saturation) was added, and the resulting solution was placed in cellophane tubes. The enzyme solution was dialyzed against 0.1 M sodium acetate buffer (pH 5) containing ammonium sulfate was added dropwise to the outside solution of the cellophane tube, and the concentration of ammonium sulfate in the cellophane tube increased gradually. The crystals of enzyme were formed in the cellophane tube when the concentration reached approximately 50% saturation. After the enzyme solution was concentrated in the freezer, the crystals were obtained. The activity of the crystalline enzyme was inhibited by Hg, Ag, Zn, and KMnO(4).

Journal Article↗

Acid proteases from species of Mucor. IV. Hydrogen-tritium exchange of Mucor miehei protease.

The kinetics of hydrogen-tritium exchange were studied in the range pH-3 for both the fully and partially tritiated protein. Exchange constants for an intermediate class and slow class of hydrogens were determined and found to give a parabolic curve characteristic of acid and base catalysis about the observed pHmin of 4.03. The anomalous rate retardation on the acid portion of the curve was attributed to electrostatic interactions which could be evaluated quantitatively from the titration data. Partial tritation and pH cross-over experiments indicated that the rank order was pH-independent thus eliminating the possiblitity of a major conformational change. Consequently, the data are most likely explicable in terms of restricted solvent accessibility.

Hydrogen-Ion Concentration↗

Mucor dimorphism.

Mucor dimorphism has interested microbiologists since the time of Pasteur. When deprived of oxygen, these fungi grow as spherical, multipolar budding yeasts. In the presence of oxygen, they propagate as branching coenocytic hyphae. The ease with which these morphologies can be manipulated in the laboratory, the diverse array of morphopoietic agents available, and the alternative developmental fates that can be elicited from a single cell type (the sporangiospore) make Mucor spp. a highly propitious system in which to study eukaryotic cellular morphogenesis. The composition and organization of the cell wall differ greatly in Mucor yeasts and hyphae. The deposition of new wall polymers is isodiametric in yeasts and apically polarized in hyphae. Current research has focused on the identity and control of enzymes participating in wall synthesis. An understanding of how the chitosome interacts with appropriate effectors, specific enzymes, and the plasma membrane to assemble chitin-chitosan microfibrils and to deposit them at the proper sites on the cell exterior will be critical to elucidating dimorphism. Several biochemical and physiological parameters have been reported to fluctuate in a manner that correlates with Mucor morphogenesis. The literature describing these has been reviewed critically with the intent of distinguishing between causal and casual connections. The advancement of molecular genetics has afforded powerful new tools that researchers have begun to exploit in the study of Mucor dimorphism. Several genes, some encoding products known to correlate with development in Mucor spp. or other fungi, have been cloned, sequenced, and examined for transcriptional activity during morphogenesis. Most have appeared in multiple copies displaying independent transcriptional control. Selective translation of stored mRNA molecules occurs during sporangiospore germination. Many other correlates of Mucor morphogenesis, presently described but not yet explained, should prove amenable to analysis by the emerging molecular technology.

Carbon↗

X-ray analyses of aspartic proteinases. V. Structure and refinement at 2.0 A resolution of the aspartic proteinase from Mucor pusillus.

The structure of mucor pusillus pepsin (EC 3.4.23.6), the aspartic proteinase from Mucor pusillus, has been refined to a crystallographic R-factor of 16.2% at 2.0 A resolution. The positions of 2638 protein atoms, 221 solvent atoms and a sulphate ion have been determined with an estimated root-mean-square (r.m.s.) error of 0.15 to 0.20 A. In the final model, the r.m.s. deviation from ideality for bond distances is 0.022 A, and for angle distances it is 0.050 A. Comparison of the overall three-dimensional structure with other aspartic proteinases shows that mucor pusillus pepsin is as distant from the other fungal enzymes as it is from those of mammalian origin. Analysis of a rigid body shift of residues 190 to 302 shows that mucor pusillus pepsin displays one of the largest shifts relative to other aspartic proteinases (14.4 degrees relative to endothiapepsin) and that changes have occurred at the interface between the two rigid bodies to accommodate this large shift. A new sequence alignment has been obtained on the basis of the three-dimensional structure, enabling the positions of large insertions to be identified. Analysis of secondary structure shows the beta-sheet to be well conserved whereas alpha-helical elements are more variable. A new alpha-helix hN4 is formed by a six-residue insertion between positions 131 and 132. Most insertions occur in loop regions: -5 to 1 (five residues relative to porcine pepsin): 115 to 116 (six residues); 186 to 187 (four residues); 263 to 264 (seven residues); 278 to 279 (four residues); and 326 to 332 (six residues). The active site residues are highly conserved in mucor pusillus pepsin; r.m.s. difference with rhizopuspepsin is 0.37 A for 25 C alpha atom pairs. However, residue 303, which is generally conserved as an aspartate, is changed to an asparagine in mucor pusillus pepsin, possibly influencing pH optimum. Substantial changes have occurred in the substrate binding cleft in the region of S1 and S3 due to the insertion between 115 and 116 and the rearrangement of loop 9-13. Residue Asn219 necessitates a shift in position of substrate main-chain atoms to maintain hydrogen bonding pattern. Invariant residues Asp11 and Tyr14 have undergone a major change in conformation apparently due to localized changes in molecular structure. Both these residues have been implicated in zymogen stability and activation.

Amino Acid Sequence↗