Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Environmental distribution”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

341 recordsLinked to original sources
PubMed2026

A review on the environmental distribution, toxic effects, bioaccumulation characteristics and risk assessment of short-chain chlorinated paraffins.

Chlorinated paraffins (CPs) are synthetic chemicals, widely used as flame retardants and plasticizers. As emerging contaminants, short chain chlorinated paraffins (SCCPs) have attracted tremendous attention due to their persistence, chronic toxicity, long-range transport potential and bioaccumulation potential. This review synthesizes global data on SCCPs' environmental occurrence, toxicological impacts, and bioaccumulation characteristics. SCCPs are ubiquitously detected in various environmental media, including water, sediment, air, soil, and biota. Ecotoxicological studies reveal that SCCPs have lethality, carcinogenicity, growth and developmental toxicities, organs toxicities and endocrine-disrupting effects across species, which pose risks to ecological systems and human health. In addition, the bioaccumulation effects of SCCPs in terrestrial and aquatic ecosystems were analyzed, and proposed the key factors affecting the bioaccumulation of SCCPs. Finally, the risk assessment of SCCPs contamination in the surface water and the soil was carried out, and all soil and most water bodies were found to be low risk. The present study could provide scientific basis and reference for environmental management of CPs products.

Paraffin↗
PubMed2026

The spatial and temporal distribution of Staphylococcus aureus along a tropical Hawaiian watershed.

Staphylococcus aureus is a leading cause of community-acquired skin and soft-tissue infections worldwide. One major route of exposure is recreating in marine waters, but knowledge is limited regarding the drivers of S. aureus in surface waters that discharge into marine environments. This study explores spatial and temporal distributions of S. aureus, including antimicrobial-resistant and virulence genes, using both culture-dependent and molecular techniques across a tropical Hawaiian watershed with a gradient of human influence. Negative binomial generalized linear mixed models revealed that the interaction between spatial and temporal factors was the strongest predictor of S. aureus and associated genes. Cultured S. aureus was highest at mid-watershed sites in summer, which included a popular swimming hole, suggesting human shedding as a significant source. Molecular detection of S. aureus (femA gene) yielded concentrations two orders of magnitude higher than cultured concentrations and peaked at estuarine sites with the greatest nutrients and water residence times. In the winter at upstream sites with no public access, staphylococci antibiotic-resistant (mecA) and S. aureus virulence gene (etb) were elevated, indicating highly pathogenic S. aureus strains in surface waters may originate from zoonotic sources. Our findings indicate that human and zoonotic sources contribute antibiotic-resistant and virulent S. aureus to watersheds, with streams facilitating environmental transmission to marine waters. This watershed-scale assessment enables the prediction of spatial and temporal conditions associated with elevated S. aureus concentrations, thereby reducing exposure and infections.

Staphylococcus aureus↗
PubMed2026

Modelling the effects of biological intervention in a dynamical gene network.

Cellular response to environmental and internal signals can be modeled by dynamical gene regulatory networks (GRN). In the literature, three main classes of gene network models can be distinguished: (1) non-quantitative (or data-based) models which do not describe the probability distribution of gene expressions; (2) quantitative models which fully describe the probability distribution of all genes co-expression; and (3) mechanistic models which allow for a causal interpretation of gene interactions. We propose two rigorous frameworks to model gene alteration in a dynamical GRN, depending on whether the network model is quantitative or mechanistic. We explain how these models can be used for design of experiment, or, if additional alteration data are available, for validation purposes or to improve the parameter estimation of the original model. We apply these methods to the Gaussian graphical model, which is quantitative but non-mechanistic, and to mechanistic models of Bayesian networks and penalized linear regression.

Gene Regulatory Networks↗
PubMed2025

Depth-dependent multi-kingdom microbial interactions and biogeochemical cycling genes in eutrophic shallow lake sediments.

Microorganisms are pivotal to lake ecosystem biogeochemical cycles, yet existing research often focuses on single microbial kingdoms or surface sediments, neglecting multi-kingdom interactions and depth-resolved dynamics. To address these gaps, we used metagenomic sequencing to characterize microbial communities and their functional associations across overlying water and 0-45 cm sediments in four shallow lakes of the middle Yangtze River basin, China. Despite increasing bacterial and fungal diversity with depth, the 0-9 cm surface sediments exhibited the strongest multi-kingdom network connectivity and the greatest microbial stability. Functional genes exhibited clear depth-dependent patterns: nitrogen cycling genes, including those involved in dissimilatory nitrate reduction to ammonium, were most enriched in the upper 0-9 cm of sediment; methane cycling genes were positively correlated with depth; phosphorus cycling genes and some sulfur cycling genes, such as assimilatory sulphate reduction, declined with depth. Sediment microbial assembly was dominated by deterministic processes, in which the vertical distribution of functional genes was primarily dictated by heavy metals and conventional environmental indicators. These findings highlight depth-specific multi-kingdom microbial interactions and their associations with biogeochemical cycling, advancing lacustrine microbial ecology understanding and providing references for lake conservation under environmental change.

Lakes↗
PubMed2026

Global Patterns of Net Ecosystem Exchange in peatlands: A Systematic Review and Meta-analysis of Drivers Across Land Use and Environmental Gradients.

Peatlands play an essential role in the global carbon cycle, storing approximately one-third of the world's soil carbon despite covering less than 3% of the land surface. Peatland degradation from anthropogenic activities and climate change can convert peatlands from net carbon sinks to sources by altering carbon cycling. Net Ecosystem Exchange (NEE), the balance between CO2 uptake and emission, is a critical indicator for assessing peatland condition and restoration efforts. We conducted a systematic quantitative literature review to investigate global patterns of NEE in peatlands and identify key environmental and anthropogenic drivers of CO2 flux variability. Annual NEE values from 120 globally distributed sites reported in peer-reviewed literature were analyzed in relation to climatic zone, land use, vegetation type, peatland condition, and water table depth. Our synthesis revealed significant geographic gaps, with peatland NEE studies substantially underrepresented in the Tropics, Africa, and Oceania. Agricultural peatlands emitted significantly more CO2 than sites under natural land uses or peat extraction, while degraded peatlands were significantly greater net CO2 sources than intact and restored systems. Restored peatlands remained net CO2 sources on average, emphasizing the importance of long-term monitoring and adaptive management following restoration interventions. Water table depth significantly affected NEE variability, with CO2 emissions increasing approximately 7.2 gCO2-C m-2yr-1 for every centimeter of water table drawdown. A substantial variability in measurement methods, data processing software, and protocols highlighted the critical need for methodological standardization. Our findings provide evidence-based targets for peatland conservation and restoration monitoring as nature-based climate solutions.

Ecosystem↗
PubMed2026

Comprehensive source-risk assessment of organophosphate esters in surface water of the Dianchi Lake Basin, Yunnan, China.

Organophosphate esters (OPEs), widely used as flame retardants and plasticizers, have been increasingly detected in aquatic environments. However, investigations of their distribution in high-altitude plateau lakes remain scarce. Identifying and quantifying the sources and associated risks of OPEs are crucial for subsequent water environment management. In this study, an integrated source-risk analysis approach was employed by combining the Positive Matrix Factorization (PMF) model, the Geodetector (GD) model, and risk quotient (RQ). Analysis of 14 OPEs in surface waters of the Dianchi Lake Basin (DLB) revealed 12 detectable compounds, with total OPEs concentrations (ΣOPEs) ranging from not detected (ND)-64.6 ng/L during the wet season and ND-35.8 ng/L during the dry season. Elevated ΣOPEs were primarily observed at inflow sites in the northern part of the lake and in urban rivers. Source apportionment indicated four major contributing sources: agricultural films containing flame-retardant and plasticizer additives, traffic-related particulate emissions, releases from household and personal care products, and industrial production and applications of flame retardants in plastics, electronics, and related products (the predominant source). The ecological impact caused by OPEs ranges from no risk to low risk, with tris(2-chloroethyl) phosphate emitted from industrial source being the primary driver of potential environmental risk. These findings highlight the necessity of prioritizing industrial sources in future management strategies. Overall, this study provides a methodological framework for source apportionment and risk assessment of OPEs and offers scientific evidence to support environmental management of OPEs in the DLB.

Environmental Monitoring↗
PubMed2026

The global potential of freshwater microbes for plastic degradation.

Plastic pollution is becoming increasingly severe on a global scale, and the potential for biodegradation as a treatment method that is environmentally friendly merits greater attention. A significant number of genes that associated the degradation of plastic (PDAGs) have been identified, however, the distribution of these genes among microorganisms in global inland waters remains to be elucidated. A global-scale meta-analysis was conducted, incorporating approximately 1000 metagenome datasets of inland waters across seven continents. A total of 13,109 metagenome-assembled genomes (MAGs) were obtained by means of metagenomics binning, and 22,621 PDAGs were identified from these. Among these recognized PDAGs, phenylacetaldehyde dehydrogenase (PAD) was the most dominant (n = 16,664), followed by catalase (n = 5931). The predominant hosts for PAD and catalase were identified as Gamma-proteobacteria and Bacteroidia, respectively. The largest number of both PAD and catalase was found in MAGs from North America, while the average gene number in single MAG was highest in MAGs from Oceania. In accordance with the prediction of traits, PDAG-carrying MAGs from Europe demonstrated the fastest growth rate and the lowest optimal growth rate. Furthermore, 25 styrene monooxygenase (StyA) enzymes were identified, which were found to cluster into two distinct groups hosted by Alpha-proteobacteria and Gamma-proteobacteria, respectively. Moreover, 11 MAGs were observed to possess the complete pathway of polystyrene degradation. These results explored the potential of inland water microorganisms as a biological resource for plastic degradation and provided valuable microbial reference information that can be used to develop biological treatment technologies for mitigating plastics.

Plastics↗
PubMed2026

Degradation of a graphene-reinforced polyamide by fungi: When culture conditions matter.

The large-scale production, marketing and disposal of polymer-based graphene products can lead to the dispersal of graphene-enriched plastic particles into terrestrial ecosystems, where they might accumulate if not degraded by organisms. The objective of this work is to test the degradability and compatibility of one polyamide-6 polymer reinforced with reduced graphene-oxide (PA6-rGO) and its base constituents (polyamide-6, PA6; reduced graphene oxide, rGO) using mono- and co-cultures of two lignin-degrading fungi (Bjerkandera adusta and Morchella esculenta) grown under different nutrient conditions. Fungal (co-)cultures were exposed to pure rGO or abraded powders of PA6 and PA6-rGO in two different liquid media, and monitored over time for biomass growth, H2O2 production, and activity of two lignolytic enzymes (i.e., Laccase, Lac, and Lignin peroxidase, LiP). The changes in polyamide structure were evaluated by proton nuclear magnetic resonance and mass spectrometry, and changes in rGO were evaluated by Raman spectroscopy. The materials had no effect on fungal growth. PA6 increased Lac secretion only in low nutrient medium, while PA6-rGO slightly suppressed LiP activity. Only M. esculenta promoted polyamides oxidation when cultured in a low nutrient medium, as evidenced by a change in mass distribution values (m/z: 400-420) and the appearance of a new resonance peak (at 5.37 ppm). Lignolytic exudates in co-cultures low in nutrients caused a greater change in rGO, as shown by the increase in the ID/IG ratio. The degradation of rGO, PA6 and PA6-rGO depended on culture conditions.

Graphite↗
PubMed2026

Towards microplastic bioremediation: Fungal degradation of pristine and pretreated high-density polyethylene and polystyrene.

Microplastic (MP) contamination has become a significant ecological issue because of its enduring existence in the ecosystem and its possible negative impacts. Therefore, using degrading strategies to eliminate these stubborn polymers has been a subject of scientific research. However, the currently used degradation methods are relatively inefficient. Given the pervasiveness of High-Density Polyethylene (HDPE) and Polystyrene (PS) and their resistance to biodegradability, disposal strategies are critical and must be addressed. This manuscript examines the biodegradation of pristine and UV-treated HDPE and PS MPs by Aspergillus flavus species in minimal growth media over 70 days. The maximum weight loss observed at 70 days for pristine HDPE and PS in sole carbon source (SCS) media was (29.33 ± 0.28) % and (17.67 ± 0.35) %, respectively. Whereas, for UV-treated HDPE and PS MPs, the % weight reduction was (33 ± 0.21) % and (25 ± 0.19) %, respectively. UV-treated MPs exhibited greater weight reduction, as UV induced oxygenated functional groups enhance polymer susceptibility to enzymes, thereby promoting biodegradation. HDPE MPs typically show a higher proportion of particles in the lower size range compared to PS MPs. This assertion was based on the weight loss, particle size distribution, and SEM analysis. Furthermore, chemical changes were evaluated using Fourier transform Infrared Spectroscopy (FTIR) analysis, which also displayed chemical oxidation occurring during biodegradation. Liquid Chromatography-Mass Spectrometry (LC-MS) results indicate that UV pretreatment enhances biodegradability by promoting chain scission. These findings further suggest that this fungus's natural and ubiquitous occurrence in terrestrial and marine environments may actively contribute to MP biodegradation while requiring few nutrients.

Microplastics↗
PubMed2026

Three-dimensional source apportionment and quantitative characterization of horizontal and vertical transport fluxes of O3 and its precursors in the Beijing-Tianjin-Hebei region, China.

Persistent surface ozone (O3) pollution in the Beijing-Tianjin-Hebei (BTH) region is driven by coupled precursor emissions and multi-scale transport, yet its altitude-dependent transport and source contributions remain insufficiently quantified. Here we integrated the Weather Research and Forecasting and the Comprehensive Air Quality Model with Extensions with the Ozone Source Apportionment Technology and a quantitative transport-flux framework to characterize three-dimensional source apportionment and horizontal/vertical fluxes of O3, Volatile Organic Compounds‌ (VOCs), and Nitrogen Oxides (NOx) across dynamic meteorological scenarios. Simulations showed that VOCs and NOx were dominated by local emissions near the surface (73.61 %-82.18 %), whereas surface O3 was primarily controlled by regional transport, with local contributions of only 11.01 %-13.75 %. Notably, the transport dominance further strengthened with altitude, exceeding 93 % at 1.8 km. Industrial and transportation emissions together contributed more than 75 % of precursor emissions and account for approximately 80 % of O3 formation, while favorable/unfavorable meteorological years modulated long-range transport efficiency and the vertical distribution of contributions. Horizontal flux analysis highlighted three major pathways (Northwest-Southeast, Southeast-Northwest, and Southwest-Northeast), with Shijiazhuang serving as a critical pollutant "sink" across altitude layers. Vertical fluxes revealed an altitude transition near 600 m: net downward transport dominated below 600 m, whereas enhanced summer convection promoted upward transport above 600 m. These results support altitude-dependent, scenario-specific strategies for coordinated regional O3 mitigation in the BTH region.

Ozone↗
PubMed2025

Tracking microplastic contamination across seasons in a freshwater reservoir: Evidence from surface water, sediments, and fishes.

Microplastics (MPs) are prevalent contaminants in aquatic environments, posing substantial ecological and health risks. These particles migrate within the different layers of aquatic bodies with time and affect the respective biota. Thus, to get an in-depth understanding of the particles, this current study investigated the seasonal distribution, morphological and chemical characteristics, along with potential ecological and human health impacts in the samples including surface water, sediment, and fish from a drinking water supplying reservoir in eastern India. Across three different seasons, pre-monsoon, monsoon, and post-monsoon samples were collected using optimized methods. Results revealed distinct seasonal trends: MP abundance in surface water peaked during the monsoon (mean: 1.15 MPs/L), while sediment showed the highest concentrations in the pre-monsoon (mean: 596 MPs/kg), indicating temporal accumulation dynamics influenced by runoff, hydrodynamics, and sedimentation. Fish gut analysis confirmed ingestion of MPs across five species, with concentrations ranging from 26 to 100 MPs/kg, depending on feeding habits. The most dominant MP type were fragments, followed by fibers, films, and beads. Polymer analysis via µFTIR identified polyethylene, polypropylene, and polyvinyl chloride as prevalent, with hazard assessments (i.e., Polymer Hazard Index (PHI)) indicating medium to very high ecological risks. Heavy metal association was more dominant in the MPs isolated from sediments than the waterborne MPs. Pollution Load Index (PLI) values were > 1 in most seasons, confirming contamination. Health risk analysis suggested potential exposure through both drinking water and fish consumption. This study emphasizes the need for seasonal monitoring, improved waste management, and mitigation strategies to address MP pollution in freshwater ecosystems.

Microplastics↗
PubMed2025

An integrated multiscale air quality modelling framework for industrial park pollution: Linking local emissions to regional transport.

Capturing the spatiotemporal distribution of pollutants in industrial parks remains challenging for regional air quality models because of their coarse resolution (3 km), resulting in uncertainties in local emission quantification. To address this, we developed the Integrated Multiscale Air Quality Modelling System for Industry (IAQMS-Industry), coupling the regional Nested Air Quality Prediction Modelling System (NAQPMS) with a city-scale chemical transport model. This framework integrates point-source locations and Gaussian plume dispersion to simulate particulate matter with a diameter smaller than 2.5 micrometres (PM2.5) at 100 m resolution. Applied to the Beijing Yi Zhuang and Tangshan industrial parks and evaluated against observations. The coupled model achieved a normalized mean bias (NMB) ranging from 3.1 % to 6.2 %, improving upon NAQPMS (-16.9 % to -7.7 %). Spatial analysis revealed that coarse regional grids underestimated the PM2.5​ concentrations at industrial sites by smoothing gradients, whereas IAQMS-Industry successfully resolved spatial patterns. Industrial point emissions accounted for 22.9 %-26.4 % of PM2.5 in the coupled model, which was significantly greater than the regional model estimates of 1.6 %-13.7 %. These findings indicate that regional models overestimate pollutant dispersion processes in industrial parks while underestimating local industrial impacts. By explicitly resolving point-source dynamics and linking them to regional transport, IAQMS-Industry provides a robust tool for designing targeted emission controls in industrial cities and balancing local air quality improvements with minimized regional pollution outflow. This study underscores the necessity of multiscale modelling for accurate source apportionment and informed environmental governance in industrial zones.

Air Pollution↗
PubMed2026

Experimental evolution reveals contrasting adaptive landscapes in lab and field environments.

Experimental evolution is widely used to infer microbial responses to environmental change, yet most laboratory studies impose constant, well-mixed conditions that differ fundamentally from fluctuating, spatially structured field environments. We compared genomic evolution in the leaf litter-associated bacterium Curtobacterium strain MMLR14_002 under control and warming treatments in laboratory culture and in a complementary field experiment. Laboratory-derived isolates accumulated more mutations per genome and exhibited stronger locus-level parallelism, with mutations recurring in a small number of coding loci. Field-derived isolates accumulated fewer mutations per genome, and these mutations rarely occurred in the same coding loci across replicate populations. Instead, field isolates exhibited a higher proportion of intergenic mutations, with mutations recurring in the same intergenic regions across independent field deployments. When coding mutations were detected in the field, they were distributed across functionally diffuse targets and more often involved metabolic pathways than the core cellular processes repeatedly targeted during laboratory evolution. Warming itself did not consistently influence mutation accumulation or the genomic distribution of mutations; instead, laboratory and field contexts primarily shaped the accumulation, targets, and repeatability of genomic change. These results suggest that laboratory thermal evolution identifies adaptive routes favored under sustained selection but may overestimate coding-level parallelism under heterogeneous field conditions. Bridging laboratory and field evolution will likely require experimental designs that incorporate temporal variability and spatial heterogeneity characteristic of natural systems.IMPORTANCEA central goal of experimental evolution is to infer how microbes evolve in nature from laboratory studies. Here, we evaluate this assumption by comparing genomic evolution of a leaf litter-associated Curtobacterium strain in laboratory and field warming experiments to identify broad patterns rather than isolate the contribution of any single environmental factor. We find that the strong parallelism at coding loci observed under laboratory conditions is reduced in the field, while mutations recurring in the same intergenic regions across field deployments suggest that parallel evolution in nature may more often involve regulatory noncoding regions rather than coding targets. These results show that environmental context reshapes adaptive landscapes and may limit the parallelism of coding-level genomic responses inferred from homogeneous laboratory conditions.

experimental evolution↗
PubMed2026

An RPA-assisted homogeneous electrochemical DNA sensor for on-site eDNA detection toward early warning of crown-of-thorns starfish outbreaks.

Crown-of-thorns starfish (COTS) outbreaks seriously threaten coral reef ecosystems, while conventional monitoring approaches are time-consuming and often lack sufficient sensitivity for early warning. Existing electrochemical DNA sensors usually require complex electrode-surface immobilization procedures, which can lead to uneven probe distribution, significant steric hindrance, and poor stability. Meanwhile, the low concentration of environmental DNA (eDNA) in marine environments further complicates detection. To overcome these challenges, this study developed a homogeneous electrochemical DNA sensor assisted by recombinase polymerase amplification (RPA) for COTS eDNA detection. Target DNA was first amplified by RPA, and the amplification products were then hybridized in solution with capture probe (CP)-modified magnetic beads (MB) and biotin-labeled signal probe (SP) to form sandwich-structured MB complexes. These complexes were subsequently magnetically enriched and immobilized on the electrode surface for electrochemical signal readout. Under optimized conditions, the sensor displayed a linear response to COTS genomic DNA from 3.77 fg/μL to 1 ng/μL, with an LOD of 2.02 fg/μL and an LOQ of 3.77 fg/μL. The sensor was applied to Xisha Islands samples, and the results agreed with droplet digital PCR (ddPCR) (P > 0.05), demonstrating its potential for sensitive and reliable on-site COTS eDNA detection.

Animals↗
PubMed2026

Epitranscriptomic erasers in bivalves: Evolutionary divergence and species-specific transcriptional plasticity of the ALKBH family under acute thermal stress.

The AlkB homolog (ALKBH) family of Fe(II)/α-ketoglutarate-dependent dioxygenases mediates nucleic acid demethylation, thereby governing RNA metabolism and genomic stability. Despite their pivotal roles in epitranscriptomic regulation across vertebrates, the evolutionary dynamics and functional significance of ALKBH proteins in bivalve mollusks remain largely unexplored. Here, we present a comprehensive phylogenomic analysis of 210 ALKBH genes identified across 35 bivalve species. Our analyses reveal a distinct evolutionary trajectory characterized by the lineage-specific loss of ALKBH4 and the restricted distribution of ALKBH5 to the Mytilidae family, contrasting sharply with vertebrate repertoires. Using the noble scallop (Chlamys nobilis) and Pacific oyster (Crassostrea gigas) as model systems, we demonstrate that ALKBH genes exhibit conserved spatiotemporal expression patterns, with pronounced enrichment in gonadal tissues and during metamorphic transitions, implicating these enzymes in gametogenesis and larval development. Furthermore, comparative thermal stress experiments reveal divergent transcriptional plasticity: the subtropical scallop C. nobilis mounts rapid, transient induction of ALKBH1/2/6 under heat shock, whereas the eurythermal oyster C. gigas maintains sustained ALKBH3 expression, potentially underpinning its superior thermal tolerance. Conversely, cold stress elicits bimodal regulation in C. nobilis, with ALKBH1/2 upregulation contrasting with ALKBH6/7/8 suppression. These findings illuminate the functional diversification of bivalve ALKBH genes and their potential utility as molecular biomarkers for assessing developmental competence and thermal resilience in shellfish aquaculture.

Animals↗
PubMed2026

Modelling peak microbial pollution events caused by combined sewer overflows in a source-to-sea system.

Predicting peak microbial pollution events in downstream coastal bathing waters caused by combined sewer overflows (CSOs) is essential for protecting public health. In urban areas, wastewater effluents, CSOs, and surface runoff can contribute to elevated microorganism loads to downstream waters. These pressures are likely to be intensified by growing population density and more frequent heavy rainfalls due to climate change. This study developed a process-based model to simulate Escherichia coli (E. coli) emissions, transport, and fate from the initial sources to coastal beaches. A three-year retrospective simulation (2017-2019) shows that E. coli concentrations in CSO discharges varied widely across the catchment (4.6 - 7.3 (log10 CFU 100 ml-1)). 99th percentile E. coli concentrations (4.0 (log10 CFU 100 ml-1)) at the inland water outlet were dominated by local CSO emissions, whereas 90th percentile E. coli concentrations (3.6 (log10 CFU 100 ml-1)) reflected cumulative upstream contributions from both CSO and effluent emissions. With the simulation accuracy of 89%, the model reliably reproduced the E. coli dynamics on the downstream beach and showed strong performance in representing peak concentrations based on Complementary Cumulative Distribution Function (CCDF) analysis. The process-based model enables quantitative tracking of source contributions and identification of pollution hotspots, providing support for mitigation measures. The study lays down a source-to-sea modelling framework for representing pollution transport across the aquatic continuum and provides a transferable tool for microbial pollution forecasting and climate adaptation planning.

Climate projection↗
PubMed2026

Genomic diversity and thermal niches of Aspergillus molds disrupting rind formation of surface-ripened cheeses.

Filamentous fungi play important roles in the development of surface-ripened cheese microbial communities and contribute to the aesthetics and flavors of these products. Much is known about the diversity and ecology of desirable cheese fungi, but our understanding of the natural history of cheese spoilage molds is limited. The goal of this work was to characterize the genomic diversity of Aspergillus species contaminating artisan cheeses and to identify how the abiotic environment of cheese (the substrate itself and temperature) may constrain the growth of Aspergillus. Comparative genomics identified two main species of Aspergillus, A. westerdijkiae and A. ostianus, as the spoilage molds across three different facilities in the Northeastern United States that experienced contamination events. Multiple genomic types of A. westerdijkiae were found across the different cheese production facilities, indicating that these contamination events are not caused by a single clonal strain. All A. westerdijkiae isolates produced ochratoxin A, but concentrations varied greatly across strains. RNA-sequencing of A. westerdijkiae on nutrient-rich lab media (malt extract agar) versus cheese curd agar identified a suite of pathways enriched in expression on cheese, including degradation of amino and fatty acids. Experiments measuring growth over a range of temperatures identified that spoilage Aspergillus species have a higher optimal growth temperature compared to desirable fungal species in cheese rinds and are outcompeted by Penicillium species at temperatures lower than 15°C. Global fungal metabarcoding databases suggest that A. westerdijkiae is not normally found in natural habitats of the Northeastern United States, and it may be introduced to this region.IMPORTANCEOver the past decade, disruptive contamination events of Aspergillus spoilage molds have occurred at cheese production facilities in Massachusetts, Connecticut, and Vermont in the United States, causing aesthetic, flavor, and potential safety issues. Our work highlights independent introductions of different strains of A. westerdijkiae into multiple cheese facilities and suggests that temperature could be used to control the abundance of Aspergillus spoilage molds. Based on our analysis of the global distribution of A. westerdijkiae, it is not invading cheese facilities from local fungal populations and may be a contaminant in materials used for cheese production.

Aspergillus↗
PubMed2026

Comparative analyses of olfactory receptor repertoires in Schizothorax fish based on the chromosome-level genomes: Implications for regulatory roles of dietary differentiation and ploidy variation.

The olfactory receptor (OR) genes constitute the molecular basis of fish olfaction, mediating survival behaviors and environmental adaptation while coevolving with habitat-driven evolution. Schizothorax, a cyprinid genus endemic to the Qinghai-Tibetan Plateau, exhibits remarkable dietary divergence and ploidy variation in response to plateau environmental changes, which presumably facilitates the adaptive evolution of OR genes. However, the evolutionary patterns of OR genes associated with trophic divergence and ploidy variation in this genus remain unclear. In this study, three species were selected: the herbivorous diploid S. macropogon, the carnivorous diploid S. lantsangensis, and the herbivorous tetraploid S. curvilabiatus. S. macropogon possessed 142 OR genes (92.25% functional), primarily located on chromosomes 14 and 24, with the fewest sequence clusters. Such compact gene repertoire and highly overlapping chromosomal clusters indicated specialization for a herbivorous olfactory niche. S. lantsangensis contained 127 OR genes (93.70% functional), concentrated on chromosomes 4 and 5, with fewer sequence clusters and a scattered distribution, reflecting evolution of OR genes under carnivorous feeding habits. The herbivorous tetraploid S. curvilabiatus exhibited striking features: 316 OR genes (94.30% functional), the most subfamilies, unique ε and κ OR subfamilies, and species-specific motifs. These characteristics revealed that ploidy, rather than herbivory, dominated OR gene evolution. In conclusion, dietary differentiation and ploidy variation together drove olfactory adaptive evolution in Schizothorax, providing new insights into vertebrate OR gene ecological adaptation.

Animals↗