Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ETHYLENE OXIDE”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

Determination of ethylene oxide, ethylene chlorohydrin, and ethylene glycol in aqueous solutions and ethylene oxide residues in associated plastics.

A gas chromatographic (GC) method was developed for the determination of ethylene oxide and its two reaction products, ethylene chlorohydrin and ethylene glycol, in aqueous ophthalmic solutions. Propylene oxide was used as an internal standard. All three components were determined in one isothermal chromatographic analysis in less than 15 min. An extraction method for the determination of ethylene oxide residues in plastic components was also developed, and certain plastics with different ethylene oxide retention characteristics were identified.

Chlorohydrins↗

Disposition kinetics of ethylene oxide, ethylene glycol, and 2-chlorethanol in the dog.

The disposition kinetics of ethylene oxide, ethylene glycol, and 2-chloroethanol were studied following their intravenous administration to beagle dogs. Plasma concentration of ethylene oxide was found to decline exponentially with a mean rate constant of 0.024 +/- 0.008 min-1 (mean +/- SD) and total body clearance of 20.0 +/- 5.2 ml/kg X min. Ethylene oxide was found to be metabolized mainly to ethylene glycol, which had a mean plasma half-life of 221.0 +/- 77.7 min and a total body clearance of 2.13 +/- 0.58 ml/kg X min. Between 7 and 24% of intravenously administered ethylene oxide was eliminated in the urine as ethylene glycol within 24 h. The elimination half-life and clearance values for 2-chlorethanol were 40.8 +/- 5.7 min and 10.3 +/- 1.7 ml/kg X min, respectively. The pharmacokinetic data gathered in the present investigation suggest that ethylene glycol rather than 2-chloroethanol is the major metabolite of ethylene oxide in the dog.

Animals↗

Dose-dependent influence of genetic polymorphisms on DNA damage induced by styrene oxide, ethylene oxide and gamma-radiation.

Styrene oxide (SO), ethylene oxide (EO) and gamma-radiation (G) are agents with a well-described metabolism and genotoxicity. EPHX1 and GSTs play an important role in the detoxification of electrophiles and oxidative stress. Enzymes involved in base excision repair (hOGG1, XRCC1), in rejoining single strand breaks (XRCC1) and in repair of cross-links and chromosomal double strand breaks (XRCC3) might have an impact on genotoxicity as well. In this study we assessed the dose-dependent effect of genetic polymorphisms in biotransforming (EPHX (Tyr113/His113 and His139/Arg139), GSTP1 (Ile105/Val105), GSTM1 and GSTT1) and DNA repair enzymes (hOGG1 (Ser326/Cys326), XRCC1 (Arg194/Trp194, Arg280/His280, Arg399/Gln399), XRCC3 (Thr241/Met241)) on the induced genotoxicity. Peripheral blood mononuclear cells from 20 individuals were exposed to 3 doses per agent (+control). Genotoxicity was evaluated by measuring comet tail length (TL) and micronucleus frequencies in binucleated cells (MNCB). Dose-dependent DNA damage was found for all agents and end-points, with the exception of MNCB induced by EO. Repeated measure ANOVA revealed a significant contribution of hOGG1 and XRCC3 genotypes to the inter-individual variability of TL and MNCB in cells exposed to EO and G. Homozygous hOGG1326 wild cells showed significantly lower EO-induced TL than the heterozygous cells. Significantly higher TL and MNCB were found in EO-exposed cells carrying the XRCC3(241)Met variant and the influence on TL was more pronounced at higher dose. In G-irradiated cells, TL was significantly higher in the hOGG1326 homozygous wild types compared with mutated genotypes. The influence of hOGG1326 on TL was borderline dose-dependent. We conclude that the influence of genetic polymorphisms of enzymes involved in DNA repair on induced genotoxicity depends on exposure dose.

Adult↗

Rapid gas chromatographic determination of ethylene oxide, ethylene chlorohydrin, and ethylene glycol residues in rubber catheters.

Isothermal gas chromatography with flame ionization detection was used to determine residual ethylene oxide (EtO), ethylene chlorohydrin, and ethylene glycol in soft rubber catheters that had been sterilized with EtO. Catheter samples were extracted by shaking with carbon disulfide, and the extract was analyzed on a 3% Carbowax 20M on 80-100 mesh Chromosorb 101 column, using nitrogen as the carrier gas. Ten replicate injections of a mixed standards solution gave coefficients of variation of 1.91, 1.23, and 4.74% for EtO, ethylene chlorohydrin, and ethylene glycol, respectively. A linear response was obtained with concentrations ranging from 1.0 to 7.9 micrograms EtO, 14.0 to 88.0 micrograms ethylene chlorohydrin, and 31.0 to 98.5 micrograms ethylene glycol. The proposed method detected as little as 0.5, 5.0, and 16.5 ng EtO, ethylene chlorohydrin, and ethylene glycol, respectively.

Catheterization↗

Determination of ethylene oxide, ethylene chlorohydrin, and ethylene glycol residues in ophthalmic solutions at proposed concentration limits.

A GLC method was developed for the determination of ethylene oxide and its two reaction products, ethylene chlorohydrin and ethylene glycol, in ophthalmic solutions at the levels recently proposed by the Food and Drug Administration. The method requires no extractions, sample preparations, or elaborate trapping and concentrating techniques. All three components can be chromatographed on the same spiral glass column packed with a porous polymer absorbent.

Chlorohydrins↗

Effect of Polyoxybutylene Chain Length on the Surface Activity of Butylene Oxide-Ethylene Oxide Block Copolymers.

Block copolymer surfactants (RBE) obtained by the addition of ethylene oxide to n-butyl, n-hexyl, n-octyl, and n-decyl ethers of mono- to tetrabutylene glycol are described. The surface activity of these nonionic surfactants has been determined, i.e., critical micelle concentration (CMC), surface excess concentration, Gamma, surface area demand per molecule, A, surface tension at CMC, gammaCMC, and DeltaG degreesads. A linear decrease of log CMC vs number of oxybutylene units in a copolymer molecule is observed. The change in the work of cohesion per oxybutylene group when passing from a molecular into a micellar state, calculated from the Shinoda equation, is 0.99-0.92 kT for the studied compounds. The equivalent of CH2 in the aliphatic alcohol group is 1.06-1.15 oxybutylene units. Surface properties of these surfactants, i.e., cloud point, wetting ability, contact angle, and foam height, have also been determined. Copyright 1998 Academic Press.

Journal Article↗

Effect of polyoxypropylene chain length on the critical micelle concentration of propylene oxide-ethylene oxide block copolymers.

In this work, the surface activity of block copolymer nonionic surfactants (RPE) has been determined, i.e., critical micelle concentration (CMC), surface excess concentration (gamma), surface area demand per molecule (A), surface tension at CMC (gamma(CMC)). A linear decrease of ln[CMC] vs number of oxypropylene units in copolymer molecule was observed. The change in the work of cohesion per oxypropylene group when passing from molecular into micellar state, calculated from the Shinoda equation, was 0.43 kT for the studied compounds.

Colloids↗

Size control of styrene oxide-ethylene oxide diblock copolymer aggregates with classical surfactants: DLS, TEM, and ITC study.

The interactions between the diblock copolymer S(15)E(63) and the surfactants sodium dodecyl sulfate (SDS), sodium decyl sulfate (SDeS), and sodium octyl sulfate (SOS) have been investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), and isothermal titration calorimetry (ITC). The surfactants with the same headgroup differentiate in their chain length. At 20 degrees C, the block copolymer is associated into micelles with a hydrodynamic radius of 11.6 nm, which is composed of a hydrophobic styrene oxide (S) core and a water-swollen oxypolyethylene (PEO or E) corona. The different copolymer/surfactant systems have been studied at a constant copolymer concentration of 2.5 g dm(-3) and in a vast range of surfactant concentrations, from 7.5 x 10(-6) up to 0.75 M. When SDS and SDeS are added to the block copolymer solution, different regions are observed in the DLS data: at low surfactant concentrations (c < 1.0 x 10(-4) M), single surfactant molecules associate with the copolymer micelle, probably the former being solubilized in the micelle core, leading to a certain disruption of the mixed micelle due to repulsive electrostatic interactions between surfactant headgroups followed by a stabilization of the mixed micelle. At higher concentrations (1.0 x 10(-4) < c < 0.1 M), two types of copolymer-surfactant complexes coexist: one large copolymer-rich/surfactant complex and one small complex consisting of one or a few copolymer chains and rich in surfactants. At higher SDS and SDeS concentrations, complete disintegration of mixed micelles takes place. In contrast, SOS-S(15)E(63) interactions are less important up to surfactant concentrations of 0.05 M due to its higher hydrophilicity, reducing the hydrophobic interactions between surfactant alkyl chains and copolymer micelles. At concentration larger than the critical aggregation concentration (cac) of the system, 0.05 M, disruption of copolymer micelles occurs. These regions have been confirmed by transmission electron microscopy. On the other hand, the titration calorimetric data for SDS and SDeS present an endothermic increase indicating the formation of mixed copolymer-rich-surfactant micelles. From that point, important differences in the ITC plot for both surfactants are present. However, the ITC curve obtained after titration of a SOS solution in the copolymer solution is quite similar to that of its titration in water.

Calorimetry↗

Behavior of a styrene oxide-ethylene oxide diblock copolymer/surfactant system: a thermodynamic and spectroscopy study.

Co-micellization of the diblock copolymer oxyphenylethylene/oxyethylene (S(17)E(65)) with the anionic surfactant sodium dodecyl sulfate (SDS) was investigated in aqueous solution using light scattering, transmission electron microscopy, isothermal titration calorimetry (ITC), and density measurements. Upon the addition of the surfactant, changes in the physicochemical properties of the micellized block copolymer take place due to interactions between the surfactant and the copolymer. Mixed micelles of copolymer and surfactant are formed and the size of the mixed aggregates changes in dependence of the amount of SDS. At a certain limiting concentration of SDS, only small rich-surfactant-copolymer aggregates and free surfactant micelles are observed in solution, as confirmed by the thermodynamic data obtained by ITC and transfer volumes. Thus, it seems that the presence of surfactant can be a tool to control the size and properties of block copolymer aggregates in solution.

Journal Article↗

Microviscosity in multiple regions of complex aqueous solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide).

Aqueous poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO109-PPO41-PEO109) copolymers are nonionic surfactants that self-organize to form aggregate structures with increasing temperature or concentration. We have studied two concentrations over a range of temperatures so that the copolymers are in one of three microphases: unimers, micelles, or hydrogels formed from body centered cubic aggregates of micelles. Three different coumarin dyes were chosen based on their hydrophobicity so that different aggregate regions could be probed independently-water insoluble coumarin 153 (C153), hydrophobic coumarin 102 (C102), and the hydrophilic sodium carboxylate form of coumarin 343 (C343-). Fluorescence anisotropy experiments provide detailed information on the local microviscosity. C153 experiences a fourfold increase in reorientation time and hence microviscosity with increasing temperature through the microphase transition from unimers to micelles. C102 also shows an increase in microviscosity with temperature but smaller in magnitude and with the microphase transition shifted to higher temperature relative to C153. C343- shows only a slight sensitivity to the microphase transition. For any of the three coumarin probes, fluorescence anisotropies do not show any correlation with the microphase transition to form cubic hydrogels.

Molecular Structure↗

Biodegradable polymeric nanospheres formed by temperature-induced phase transition in a mixture of poly(lactide-co-glycolide) and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer.

The mixture of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer(F-127) and PLGA (poly(lactide-co-gycolide)) forms a liquid state above their phase transition temperatures, and the phase-separated state is induced by decreasing the temperature below the phase transition temperature. On the basis of the temperature-induced phase transition behavior in the mixture of F-127 and PLGA, a novel method for the preparation of drug-loaded PLGA nanospheres was designed and characterized by measuring the loading amount, the encapsulation efficiency, and the drug release pattern. Paclitaxel, used as a potent anticancer drug, was selected as a model drug.

Antineoplastic Agents↗

Hydrophilized poly(lactide-co-glycolide) nanospheres with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer.

A novel method for preparing the PLGA nanospheres with hydrophilic surface has been designed and characterized. Because of good solubility of tetraglycol in water, PLGA (poly(lactide-co-glycolide)) nanospheres were formed by spraying the PLGA/tetraglycol solution into water. The size of PLGA nanospheres was manipulated by changing the concentration of PLGA/tetraglycol solution. Based on the hydrophobic interaction between PLGA and poly(propylene oxide) domain of F-127 (one of Pluronics, poly(ethylene oxide)-poly(propylene oxide)poly(ethylene oxide) triblock copolymer, F-127-coated PLGA nanospheres was prepared to enhance the stability of PLGA nanospheres in the aqueous media. For the application as a drug delivery vehicle, it was characterized by measuring the loading amount, the encapsulation efficiency and the release pattern of drug. Paclitaxel used as a potent anti-cancer drug was selected as a model drug.

Antineoplastic Agents↗

Self-consistent-field analysis of the micellization of carboxy-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers.

The micellization properties of carboxy-modified Pluronics P85 (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers) are investigated by means of a molecularly realistic self-consistent-field theory. We consider the, so-called, carboxylic acid end-standing P85 (CAE-85) case where the carboxylic group is located at the end of both PEO parts and the carboxylic acid center-standing P85 (CAC-85) case where each of the carboxylic group presents between the PEO and PPO blocks. The micellization of these copolymers depends on the pH, the added electrolyte concentration phis, and the temperature. It is shown that the aggregation number (Nagg) decreases, whereas the critical micellization concentration (CMC) increases with pH. For the case of increasing phis, the Nagg increases and the CMC decreases. The critical micellization temperature (CMT) and cloud point temperature (CPT) increase with pH at low phis and decrease at increasing phis. The changing from CAE-85 to CAC-85 leads to increasing CMC and CMT, but lower CPT.

Journal Article↗

Association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers with cationic surfactants in aqueous solution.

The association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers in aqueous solution with hexadecyltrimethylammonium bromide (HTAB), tetradecyltrimethylammonium bromide (TTAB), and dimethylene bis(decyldimethylammonium bromide) (10-2-10), was studied by fluorescence, viscosity, and Krafft temperature measurements. It has been observed that (EO)18(PO)31(EO)18 interacts more strongly than (EO)2(PO)15.5(EO)2 and (EO)2.5(PO)31(EO)2.5 with HTAB/TTAB due to synergistic interactions. A stronger capability of (EO)18(PO)31(EO)18 to interact with cationic surfactants arises from the greater number of electronegative EO units (total 36 EO units) than of (EO)2(PO)15.5(EO)2 (total 4 EO units) and (EO)2.5(PO)31(EO)2.5 (total 5 EO units). The antagonistic mixing behavior of present triblock polymers has been observed with 10-2-10. A difference in the mixing behavior of the latter from that of HTAB/TTAB has been attributed to its dimeric nature, which may create steric hindrances with triblock polymer components at the head group region in the mixed state.

Journal Article↗