SEARCH · Search PubMed
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
We describe a new NMR experiment, (1)H-detected double-J-modulated (DJM)-INEPT-INADEQUATE, for tracing out the carbon skeleton of molecules. This experiment allows simultaneous correlation of directly bonded carbon atoms and those separated by multiple bonds, while at the same time also providing the values of all J(CC) coupling constants. This is achieved by replacing both fixed carbon-carbon coupling evolution intervals of the INEPT-INADEQUATE experiment by variable time intervals, which are incremented in concert with the DQ evolution period (t(1)). We show that the analysis of the fine structure of cross-peaks in DJM-INEPT-INADEQUATE spectra leads to accurate values of coupling constants and give guidelines for the proper usage of the method. The proposed experiment is two times less sensitive that the original INEPT-INADEQUATE experiment. We show that, using a 600-MHz cryoprobe and 20 mg of a monosaccharide, spectra that are suitable for the analysis of coupling constants as small as 2 Hz can be obtained within 24 h. Instead of performing multiple experiments, a single DJM-INEPT-INADEQUATE experiment can thus provide a wealth of information for the structural analysis of small molecules.
Explore the source record for details and available documents.
Nanotechnology and nanomaterials have become the new frontier world-wide over the past few years and prospects for the production and novel uses of large quantities of carbon nanotubes in particular are becoming an increasing reality. Correspondingly, the potential health risks for these and other nanoparticulate materials have been of considerable concern. Toxicological studies, while sparse, have been concerned with virtually uncharacterized, single wall carbon nanotubes, and the conclusions have been conflicting and uncertain. In this research we performed viability assays on a murine lung macrophage cell line to assess the comparative cytotoxicity of commercial, single wall carbon nanotubes (ropes) and two different multiwall carbon nanotube samples; utilizing chrysotile asbestos nanotubes and black carbon nanoaggregates as toxicity standards. These nanotube materials were completely characterized by transmission electron microscopy and observed to be aggregates ranging from 1 to 2 microm in mean diameter, with closed ends. The cytotoxicity data indicated a strong concentration relationship and toxicity for all the carbon nanotube materials relative to the asbestos nanotubes and black carbon. A commercial multiwall carbon nanotube aggregate exhibiting this significant cell response was observed to be identical in structure to multiwall carbon nanotube aggregates demonstrated to be ubiquitous in the environment, and especially in indoor environments, where natural gas or propane cooking stoves exist. Correspondingly, preliminary epidemiological data, although sparse, indicate a correlation between asthma incidence or classification, and exposure to gas stoves. These results suggest a number of novel epidemiological and etiological avenues for asthma triggers and related respiratory or other environmental health effects, especially since indoor number concentrations for multiwall carbon nanotube aggregates is at least 10 times the outdoor concentration, and virtually all gas combustion processes are variously effective sources. These results also raise concerns for manufactured carbon nanotube aggregates, and related fullerene nanoparticles.
Polymeric carbons are produced by the carbonization of a wide range of organic polymeric systems. We have concentrated on the fabrication of two types of polymeric carbons, glassy carbon and carbon-fiber-reinforced carbon (CFRC), both involving phenolic resin precursors. We describe herein the technology which enables us to make dental implants and heart valves out of glassy carbon. We also show how carbon-fiber-reinforced carbon can be made in the form of rods and plates for orthopedic use and molded before firing to produce complex, rigid, individually sculptured shapes suitable for maxillofacial bone replacement. The mechanical properties will be discussed in relation to the structure of these various forms of polymeric carbon. The main purpose of the work is to show that the technology of polymeric-carbon manufacture is essentially simple and the manufacturing process is readily carried out in laboratories which have already been equipped to fabricate standard dental prostheses.
OBJECTIVE: Previous studies demonstrated that a non-carbonated blackcurrant juice drink with added calcium produced little erosion of enamel in vitro and in situ by comparison with other low pH fruit drinks. The aim of this study is to evaluate the erosive effects in situ of an experimental formulation carbonated drink with added calcium, compared to a conventional carbonated drink over a 20 day period using a similar design as in previous studies. METHOD: The study was a single centre, single blind, randomised placebo controlled three cell crossover design involving 15 volunteers. The test drinks were an experimental carbonated ready-to-drink (RTD) blackcurrant drink, a conventional carbonated RTD orange drink and water. Two enamel samples were retained in situ, in the midline of the hard palate on an upper removable acrylic appliance. Drinks were 250 ml volumes consumed four times per day during 20 working days. Measurements of enamel loss were made on enamel samples after days 2, 5, 10, 15 and 20 by profilometry. RESULTS: The experimental carbonated blackcurrant drink caused significantly less enamel loss than the conventional carbonated orange drink at all time points measured, but was not significantly different from water at days 2, 5 and 20. CONCLUSIONS: This study has shown that it is possible to modify carbonated soft drinks in a manner similarly shown with non-carbonated soft drinks, to minimise dental erosion.
The formation of carbon nanotubes in a pure carbon arc in a helium atmosphere is found to involve liquid carbon. Electron microscopy shows a viscous liquid-like amorphous carbon layer covering the surfaces of nanotube-containing millimeter-sized columnar structures from which the cathode deposit is composed. Regularly spaced, submicrometer-sized spherical beads of amorphous carbon are often found on the nanotubes at the surfaces of these columns. Apparently, at the anode, liquid-carbon drops form, which acquire a carbon-glass surface due to rapid evaporative cooling. Nanotubes crystallize inside the supercooled, glass-coated liquid-carbon drops. The carbon-glass layer ultimately coats and beads on the nanotubes near the surface.
A new system has been developed for the determination of total organic carbon (TOC) and inorganic carbon (IC) or total inorganic carbon (TIC) in waters. Only nonvolatile organic compounds can be detected through the present method. The system presented in this work is based on the measurement of the carbon atomic emission intensity in inductively coupled plasma atomic emission spectrometry (ICP-AES). This way, the organic matter does not undergo any preoxidation step. A semiautomatic accessory connected to the spectrometer separates the different carbon fractions (i.e., organic and inorganic). Because most of the solutions used in the present work did not contain suspended solid particles, the actual parameter that was determined was the dissolved organic carbon (DOC). The present system exhibits good sensitivities compared to those provided by conventional TOC and IC determination methods. The limits of detection obtained in the present work have been 0.07 and 0.0007 mg/L C in terms of TOC and IC, respectively. Furthermore, the system is able to handle high-salt-content solutions. This fact suggests that it would be possible to analyze seawater samples, avoiding some of the problems encountered with conventional methods, such as system blocking or interferences. The TOC and IC values found for natural samples are very close to those measured using conventional methods. The ICP-AES method has been successfully used in two interesting applications: (i) monitoring the efficiency of a water treatment plant and (ii) determining the contents of dissolved carbon dioxide, on one hand, and that of carbonate and bicarbonate, on the other, in the same sample.
Carbon fiber-reinforced carbon composites (CFRC) are considered to be promising materials for orthopedic and dental surgery. Their mechanical properties can be tailored to be similar to those of bone, and their chemical composition (close to pure carbon) promises that they will be tolerated well by the surrounding tissue. In this study, CFRC composites were fabricated from phenolic resin and unidirectionally oriented Torayca carbon fibers by carbonization (1000 degrees C) and graphitization (2500 degrees C). The material then was cut with a diamond saw into sheets of 8 x 10 x 3 mm, and the upper surface was polished by colloidal SiO2 and/or covered with a carbon-titanium (C:Ti) layer (3.3 microm) using the plasma-enhanced physical vapor deposition method. Three different kinds of modified samples were prepared: polished only, covered only, and polished + covered. Untreated samples served as a control. The surface roughness of these samples, measured by a Talysurf profilometer, decreased significantly after polishing but usually did not decrease after coating with a C:Ti layer. On all three modified surfaces, human osteoblast-like cells of the MG63 line and rat vascular smooth muscle cells (both cultured in a Dulbecco's minimum essential medium with 10% fetal bovine serum) adhered at higher numbers (by 21-87% on day 1 after seeding) and exhibited a shorter population doubling time (by 13-40%). On day 4 after seeding, these cells attained higher population densities (by 61-378%), volume (by 18-37%), and protein content (by 16-120%). These results were more pronounced in VSMC than in MG63 cells and in both groups of C:Ti-covered samples than in the polished only samples. The release of carbon particles from the CFRC composites was significantly decreased--by 8 times in the polished only, 24 times in the covered only, and 42 times in the polished + covered samples. These results show that both polishing and carbon-titanium covering significantly improve the biocompatibility of CFRC composites in vitro, especially when these two modifications are combined.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A new type of one-dimensional (1D) carbon structure, carbon nanowires (CNWs), was discovered in the cathode deposits prepared by hydrogen arc discharge evaporation of carbon rods. Observation of high-resolution transmission electron microscopy (HRTEM) indicates that a CNW consists of a multiwalled carbon nanotube (MWNT) with a long 1D linear carbon chain (C chain) inserted into its innermost tube of 0.7 nm in diameter. The characteristic Raman peaks of CNWs appeared at around 1850 cm(-1). Raman scattering and HRTEM studies show the formation of a long linear C chain involving more than 100 carbon atoms inside a MWNT. This novel 1D carbon allotrope has potential applications in nanoelectronics, nanomechanics, and nanomaterials.
The effect of low phosphate supply (low P) was determined on the diurnal changes in the rate of carbon export, and on the contents of starch, sucrose, glucose, and fructose 2,6-bisphosphate (F2,6BP) in leaves. Low-P effects on the activities of a number of enzymes involved in starch and sucrose metabolism were also measured. Sugar beets (Beta vulgaris L. cv. F58-554H1) were cultured hydroponically in growth chambers and the low-P treatment induced nutritionally. Low-P treatment decreased carbon export from the leaf much more than it decreased photosynthesis. At growth chamber photon flux density, low P decreased carbon export by 34% in light; in darkness, export rates fell but more so in the control so that the average rate in darkness was higher in low-P leaves. Low P increased starch, sucrose, and glucose contents per leaf area, and decreased F2, 6BP. The total extractable activities of enzymes involved in starch and sucrose synthesis were increased markedly by low P, e.g. adenosine 5-diphosphoglucose pyrophosphorylase, cytoplasmic fructose-1,6-bisphosphatase, uridine 5-diphosphoglucose pyrophosphorylase, and sucrose-phosphate synthase. The activities of some enzymes involved in starch and sucrose breakdown were also increased by low P. We propose that plants adapt to low-P environments by increasing the total activities of several phosphatases and by increasing the concentrations of phosphate-free carbon compounds at the expense of sugar phosphates, thereby conserving Pi. The partitioning of carbon among the various carbon pools in low-P adapted leaves appears to be determined in part by the relative capacities of the enzymes for starch and sucrose metabolism.
Explore the source record for details and available documents.
Carbonate anions resulting from reaction of primary or secondary alcohols with carbon dioxide, when added to methanesulfonic anhydride in cooled acetonitrile solution, yield methanesulfonyl carbonates, a new class of synthetic intermediate. Base-mediated reaction of the methanesulfonyl carbonates with alcohols, thiols, and amines yields carbonates, thiocarbonates, and carbamates, respectively. Overall yields for the three steps vary from 19% to 42%.
Scanning thermal microscopy (SThM) is a relatively new technique based on atomic force microscopy in which the tip is replaced by an ultra-miniature temperature probe. This paper reports on a preliminary investigation of the application of SThM in the characterization of the thermal properties of carbon fibres and carbon-carbon (CC) composites. The technique enabled a comparative study to be made of discrete fibre and matrix thermal properties in a series of model unidirectional composites. The thermal images revealed a marked increase in thermal conductivity of the matrix with increasing temperature of treatment and hence confirmed the development of a highly ordered carbon matrix. The results were in qualitative agreement with previously determined values of thermal conductivity from which the separate values of fibre and matrix thermal conductivity had been derived. The technique was also applied to the characterization of samples of unknown processing history, enabling an estimation to be made of the heat treatment and type of the fibres and matrix present in the composite. It was concluded that SThM promises to be a powerful technique for the study of the thermal properties of CC composites and carbon fibres, as it uniquely enables variations in local thermal conductivity to be detected and resolved. Absolute quantification of the technique remains the key to its future widespread acceptance in materials characterization.
The iridium(perfluoropropyl)(vinyl) complex CpIr(PMe(3))(n-C(3)F(7))(CH=CH(2)) (5) has been prepared. It has been characterized by X-ray crystallography, and its ground state conformation in solution has been determined by (19)F{(1)H} HOESY NMR studies. It reacts with the weak acid lutidinium iodide to afford the eta(1)-allylic complex CpIr(PMe(3))((Z)-CH(2)CH=CFC(2)F(5))I (6), which has also been characterized crystallographically. The mechanism of C-F bond activation and C-C bond formation leading to 6 has been elucidated in detail by studying the reaction of 5 with lutidinium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate [LutH(+)B(ArF)(4)(-)], containing a weakly coordinating counteranion. The main kinetic product of this reaction, determined by (19)F{(1)H} HOESY studies at -50 degrees C, is the endo-CpIr(PMe(3))(anti-eta(3)-CH(2)CHCFCF(2)CF(3))[B(ArF)(4)] diastereomer 9, along with a small amount of the exo-syn-isomer 8. Isomer 9 rearranges at -20 degrees C to its exo-anti isomer 7, and subsequently to the thermodynamically favored exo-syn-isomer 8, which has been isolated and crystallographically characterized. Complex 8 reacts with iodide to afford complex6. On the basis of the unambiguously defined kinetically controlled stereochemistry of 9 and 8, a detailed mechanism for the C-F activation/C-C coupling reaction is proposed, the principal conclusion of which is that C-F activation is completely diastereoselective.
The mu-eta(3)-allenyl/propargyldipalladium complexes were synthesized by the reaction of the corresponding eta(1)-allenyl- or eta(1)-propargylpalladium complexes with Pd(2)(dba)(3). The X-ray diffraction analysis indicates that the dinuclear complex has a unique structure, in which two palladium, three carbon, two phosphorus, and one halogen atoms are in the same plane. These dinuclear complexes react with electrophiles, such as HCl or AcCl, at the central carbon of the mu-eta(3)-allenyl/propargyl ligand to give the mu-eta(3)-vinylcarbenedipalladium complexes. Intramolecular reaction proceeded smoothly to give cyclization products quantitatively. Addition of a catalytic amount of a palladium(0) complex dramatically accelerated the carbon-carbon bond formation. The MO calculations on the mu-eta(3)-allenyl/propargyl complexes indicated that the reaction proceeds via orbital control.