Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Biopolymer”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed2005

Vesicle--biopolymer gels: networks of surfactant vesicles connected by associating biopolymers.

The effect of adding an associating biopolymer to surfactant vesicles and micelles is studied using rheology and small-angle neutron scattering (SANS). The associating polymer is obtained by randomly tethering hydrophobic alkyl chains to the backbone of the polysaccharide, chitosan. Adding this polymer to surfactant vesicles results in a gel; that is, the sample transforms from a Newtonian liquid to an elastic solid having frequency-independent dynamic shear moduli. SANS shows that the vesicles remain intact within the gel. The results suggest a gel structure in which the vesicles are connected by polymer chains into a three-dimensional network. Vesicle-polymer binding is expected to occur via the insertion of polymer hydrophobes into the vesicle bilayer. Each vesicle thus acts as a multifunctional junction in the network structure. Significantly, gel formation does not occur with the native chitosan that has no hydrophobes. Moreover, adding the hydrophobically modified chitosan to a viscous sample containing wormlike micelles increases the viscosity further but does not give rise to a gel-like response. Thus, the formation of a robust gel network requires both the presence of hydrophobes on the polymer and vesicles in solution.

Journal Article↗
PubMed2005

Macrophage-stimulating activity of exo-biopolymer from cultured rice bran with Monascus pilosus.

To find a new use of rice bran, five fungi were examined for the production of exo-biopolymer with macrophage-stimulating activity from rice bran. Among the exo-biopolymers produced from the cultures, Monascus pilosus had the most potent macrophage stimulating activity in a liquid culture rather than in a solid culture. In order to improve the yield of exo-biopolymer with macrophage-stimulating activity, a suitable medium for exo-biopolymer was tested in submerged culture of M. pilosus. The highest amount of exo-biopolymer (13.9 mg/mL) was obtained in a medium containing rice bran as an only carbon source followed by media with additional maltose and sucrose (13.8 and 13.7 mg/mL, respectively). The addition of peptone resulted in the production of high amount of exo-biopolymer (15.1 mg/mL), meanwhile the addition of ammonium chloride resulted in 264.0 microg/mL of glucosamine content. Among eight different kinds of inorganic salts tested, potassium phosphate (0.1%) was the most effective inorganic salt for the mycelial growth and exo-biopolymer production. Therefore the optimal medium composition was as follows (g/L): 20 g of rice bran, 5 g of peptone, and 1 g of KH2PO4. The optimal culture pH and time for mycelial growth and exo-biopolymer production was pH 5.0 and 25 degrees C, respectively. The maximum exo-biopolymer (20.1 mg/mL) was observed at the fourth day of cultivation. Exo-biopolymer, a crude polysaccharide fraction, mainly contained neutral sugar (81.8%) with considerable amounts of uronic acid (18.2%). Component sugar analysis showed that the active fraction consisted mainly of arabinose, galactose, glucose, which was digested from starch of rice bran during cultivation, and uronic acid (molar ratio; 0.8:1.0:0.7:0.8).

Animals↗
PubMed2003

Conformon-driven biopolymer shape changes in cell modeling.

Conceptual models of the atom preceded the mathematical model of the hydrogen atom in physics in the second decade of the 20th century. The computer modeling of the living cell in the 21st century may follow a similar course of development. A conceptual model of the cell called the Bhopalator was formulated in the mid-1980s, along with its twin theories known as the conformon theory of molecular machines and the cell language theory of biopolymer interactions [Ann. N.Y. Acad. Sci. 227 (1974) 211; BioSystems 44 (1997) 17; Ann. N.Y. Acad. Sci. 870 (1999a) 411; BioSystems 54 (2000) 107; Semiotica 138 (1-4) (2002a) 15; Fundamenta Informaticae 49 (2002b) 147]. The conformon theory accounts for the reversible actions of individual biopolymers coupled to irreversible chemical reactions, while the cell language theory provides a theoretical framework for understanding the complex networks of dynamic interactions among biopolymers in the cell. These two theories are reviewed and further elaborated for the benefit of both computational biologists and computer scientists who are interested in modeling the living cell and its functions. One of the critical components of the mechanisms of cell communication and cell computing has been postulated to be space- and time-organized teleonomic (i.e. goal-directed) shape changes of biopolymers that are driven by exergonic (free energy-releasing) chemical reactions. The generalized Franck-Condon principle is suggested to be essential in resolving the apparent paradox arising when one attempts to couple endergonic (free energy-requiring) biopolymer shape changes to the exergonic chemical reactions that are catalyzed by biopolymer shape changes themselves. Conformons, defined as sequence-specific mechanical strains of biopolymers first invoked three decades ago to account for energy coupling in mitochondria, have been identified as shape changers, the agents that cause shape changes in biopolymers. Given a set of space- and time-organized teleonomic shape changes of biopolymers driven by conformons, all of the functions of the cell can be accounted for in molecular terms-at least in principle. To convert a conceptual model of the cell into a computer model, it is necessary to represent the conceptual model in an algebraic language. To this end, we have begun to apply the process algebra of Milner [Communicating and Mobile Systems: The pi-calculus, Cambridge University Press, Cambridge, 1999] to develop what is here called the "shape algebra," capable of describing complex and mobile patterns of interactions among biomolecules leading to cell functions.

Algorithms↗
PubMedDate not supplied

Preparation and characterization of bifunctional biopolymers for receptor-based liposomal immunosensing.

In this study, we prepared bifunctional biopolymers for development of a novel liposomal immunosensing element. These biopolymers were produced such that a rat monoclonal antibody fragment Fab' was linked to a cardiac protein Troponin I (TnI) peptide by a cross-linking reagent, o-phenylenedimaleimide (o-PDM) or N-sucinimidyl 3-(2-pyridyldithio)propionate (SPDP). The biopolymer formation yields were approximately 10% for Fab-TnIMal and 30% for Fab-TnISPDP. Molar ratios of Fab' to SPDP or o-PDM and conjugated Fab' to TnI peptide and conjugation pH have considerable effects on the biopolymer yield. Purification of these biopolymers was achieved by employing size-exclusion HPLC. These biopolymers can bind to receptor channels on one end, while the peptide end can be recognized by an anti-TnI antibody serving as a protein linker to block the channels in the immunosensing element. Then reactions may be used where free analyte competes for cross-linker binding sites whereby channels are rendered active. Characterization of purified biopolymers was performed using gel electrophoresis, ELISAs, and a BIAcore instrument. Furthermore, results of real-time biospecific interaction experiments with use of the BIAcore show that competition binding reactions of free TnI peptide occurred in this new immunosensing design. The binding activities of these two biopolymers are slightly different.

Antibody Specificity↗
PubMed2001

Simultaneous measurement of biopolymer-mediated Mac-1 up-regulation and adherence of neutrophils: a novel flow cytometric approach for predicting initial inflammatory interaction with foreign materials.

Implantation of any medical device normally causes an inflammatory cell interaction with the foreign material. In vitro cell activation of human neutrophils (Mac-1 upregulation) has been taken as one measure to assess the attributable risk of inflammation due to biopolymers before their clinical application. Mac-1 expression has generally been measured by flow cytometric assays, whereas quantification of neutrophil adhesion to the biopolymer surfaces has been performed by separate and time-consuming assays, e.g. microscopically by differential cell counting. However, due to an increasing number of surface-modified novel biopolymers entering clinical usage, effective testing of their inflammatory potential is now mandatory. To facilitate these analyses, we have developed a novel flow cytometric assay permitting simultaneous measurement of biopolymer-mediated neutrophil activation and adhesion. The biopolymers were used as beads (diameter 25+/-10 microm), and were demonstrated to be non-phagocytosable and non-fluorescent before being co-incubated with whole human blood (range of ratio granulocytes/beads from 5:1 to 1:1). Besides flow cytometric measurement of Mac-1 up-regulated neutrophils as fluorescing events, a fluorescence of the bead population indicates the adherence of activated neutrophils to the biopolymer surface.After establishing this assay, we evaluated it by comparing six different biopolymers. We observed high levels of Mac-1 expression (>70% of positive control) accompanied by increased adhesiveness (>60% of neutrophils) for polyurethane (PUR), polymethylmetacrylate (PMMA), and poly-DL-lactide (PDLLA) beads. Low Mac-1 expression levels (<10%) accompanied by a low percentage of adhering neutrophils (<10%) were observed for polyethylene (PE), polyisoprene (PI), and silicone (SI) beads.

Biocompatible Materials↗
PubMed2002

Studies on surfactant-biopolymer interaction. I. Microcalorimetric investigation on the interaction of cetyltrimethylammonium bromide (CTAB) and sodium dodecylsulfate (SDS) with gelatin (Gn), lysozyme (Lz) and deoxyribonucleic acid (DNA).

The interaction of the surfactants cetyltrimethyl ammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) with the biopolymers gelatin (Gn), lysozyme (Lz) and deoxyribonucleic acid (DNA) was studied by isothermal titration microcalorimetry at varied biopolymer concentration, pH and temperature. The nature of interaction of the surfactants with the biopolymers was assessed from the observed enthalpy-[surfactant] profiles. The biopolymer-induced aggregation of the surfactants was observed. The enthalpies of aggregation of amphiphiles, binding of aggregates with macromolecules, organisational change of bound aggregates, and threshold concentrations for micelle formation of surfactants in the presence of biopolymers were estimated. The results collected on the three biopolymers were analysed and compared.

Biopolymers↗
PubMedDate not supplied

Role of ionic strength on the relationship of biopolymer conformation, DLVO contributions, and steric interactions to bioadhesion of Pseudomonas putida KT2442.

Biopolymers produced extracellularly by Pseudomonas putida KT2442 were examined via atomic force microscopy (AFM) and single molecule force spectroscopy. Surface biopolymers were probed in solutions with added salt concentrations ranging from that of pure water to 1 M KCl. By studying the physicochemical properties of the polymers over this range of salt concentrations, we observed a transition in the steric and electrostatic properties and in the conformation of the biopolymers that were each directly related to bioadhesion. In low salt solutions, the electrophoretic mobility of the bacterium was negative, and large theoretical energy barriers to adhesion were predicted from soft-particle DLVO theory calculations. The brush layer in low salt solution was extended due to electrostatic repulsion, and therefore, steric repulsion was also high (polymers extended 440 nm from surface in pure water). The extended polymer brush layer was "soft", characterized by the slope of the compliance region of the AFM approach curves (-0.014 nN/nm). These properties resulted in low adhesion between biopolymers and the silicon nitride AFM tip. As the salt concentration increased to > or =0.01 M, a transition was observed toward a more rigid and compressed polymer brush layer, and the adhesion forces increased. In 1 M KCl, the polymer brush extended 120 nm from the surface and the rigidity of the outer cell surface was greater (slope of the compliance region = -0.114 nN/nm). A compressed and more rigid polymer layer, as well as a less negative electrophoretic mobility for the bacterium, resulted in higher adhesion forces between the biopolymers and the AFM tip. Scaling theories for polyelectrolyte brushes were also used to explain the behavior of the biopolymer brush layer as a function of salt concentration.

Bacterial Adhesion↗
PubMed2004

Intralesional mitoxantrone biopolymer-mediated chemotherapy prolongs survival in rats with experimental brain tumors.

The present study was designed to test the efficacy of intratumoral biopolymer-mediated mitoxantrone chemotherapy in the rat brain 9L glioma model. Mitoxantrone polymers were tested in vitro in 9L and C6 cell cultures for 10 days. Subsequently, adult Fisher 344 rats were implanted with 5 x 10(4) 9L glioma cells in the frontal region of the brain. In a first experiment, 2 days after cells inoculation, one group of rats were implanted with a biopolymer loaded with 4 mg of mitoxantrone at the tumor site. A second group of rats received drug-free biopolymers and served as controls. In a second experiment, rats were implanted with a biopolymer loaded with 2 mg of mitoxantrone. Another group of rats received 2 mg of mitoxantrone intraperitoneally. Controls received drug-free biopolymers. Rats were sacrificed as soon as they developed progressive neurological deficits. In the first experiment mean survival of mitoxantrone-treated rats was 10+/-2 vs. 15+/-2 days for the control group (P = 0.0003). Early morbidity was seen in 60%, and impaired wound healing was seen in 40% of the 4 mg mitoxantrone treated animals. In the second experiment mean survival of mitoxantrone-treated rats was significantly longer than that of the control group (P < 0.0001) with 33+/-7 vs. 13.8+/-2 days for the control group. Only transient early morbidity (20%) was observed at this dose. All rats in the intraperitoneally mitoxantrone-treated group died within the first 4 days after injection. We conclude that controlled-release EVAc carriers deliver biologically active mitoxantrone in a sustained fashion. In vivo biopolymer-mediated mitoxantrone in loco chemotherapy can significantly prolong survival in rats with intracerebral 9L gliomas. Morbidity is mainly dose related, and can be reduced at acceptable levels without compromising the therapeutic effect.

Animals↗
PubMed2003

Optimization of submerged-culture conditions for mycelial growth and exo-biopolymer production by Auricularia polytricha (wood ears fungus) using the methods of uniform design and regression analysis.

This paper is concerned with the optimization of submerged culture conditions for mycelial growth and exo-biopolymer production by Auricularia polytricha by one-factor-at-a-time and uniform design (UD) methods. First, the one-factor-at-a-time method was adopted to investigate the effects of environmental factors (i.e., initial pH and temperature) and variables of medium components (i.e., carbon, nitrogen and mineral sources) on mycelial growth and exo-biopolymer production. Sucrose, yeast extract, and K2HPO4 were identified to be the most suitable carbon, nitrogen, and mineral sources, respectively. The optimal temperature and initial pH for mycelial growth and exo-biopolymer production were found to be 25 degrees C and 5.0, respectively. Subsequently, the concentrations of sucrose, yeast extract, and K2HPO4 were optimized using the UD method. The optimal concentrations for the enhanced production were determined as 6% (w/v) sucrose, 2.5% (w/v) yeast extract, and 0.3% (w/v) K2HPO4 for mycelial yield, and 6% (w/v) sucrose, 1.28% (w/v) yeast extract, and 0.3% (w/v) K2HPO4 for exo-biopolymer production, respectively. Subsequent experiments confirmed the validity of the models. This optimization strategy in shake-flask culture led to a mycelial yield of 6.14 g/l, and exo-biopolymer production of 2.12 g/l, respectively, which were considerably higher than those obtained in the preliminary studies. By using the optimized medium, the maximum concentrations of mycelial biomass and exo-biopolymer in a 5 litre stirred-tank bioreactor indicated 35.3 g/l and 3.1 g/l, respectively.

Basidiomycota↗
PubMed2006

Optimization of physical parameters for exo-biopolymer production in submerged mycelial cultures of two entomopathogenic fungi Paecilomyces japonica and Paecilomyces tenuipes.

AIMS: In the present study, two different optimization techniques were used to determine the suitable operating parameters for exo-biopolymer production in submerged mycelial cultures of two entomopathogenic fungi Paecilomyces japonica and Paecilomyces tenuipes. METHODS AND RESULTS: First, the rotating simplex method, a nonstatistical optimization technique, was employed to obtain the best combination of physical parameters (viz. pH, agitation intensity, aeration rate) for maximum exo-biopolymer production by P. japonica in a batch bioreactor. The optimal combination was determined to be a pH of 8.06, an aeration of 3 vvm, without any impeller agitation, producing a 17-time increase in exopolymer production (34.5 g l(-1)) when compared with that achieved in unoptimized flask cultures. Second, the uniform design method, a statistical optimization technique, was employed to determine the best operating parameters for submerged culture of P. tenuipes. The optimal combination for mycelial growth was determined to be a pH of 4.88, an aeration of 2 vvm and an agitation of 350 rpm, while a pH of 4, an aeration of 2 vvm and an agitation of 150 rpm was best for exo-biopolymer production. CONCLUSIONS: The exo-biopolymer production in P. japonica optimized by the rotating simplex method was strikingly improved (max. 34.5 g l(-1)), and the exo-biopolymer production in P. tenuipes optimized by the uniform design method was also significantly increased (max. 3.4 g l(-1)). SIGNIFICANCE AND IMPACT OF THE STUDY: The successful application of these two different optimization techniques in this study implies that these methods are worthy of applying to other fermentation systems for the production of bioactive mycelial biomass and exo-biopolymers in liquid culture of higher fungi.

Biomass↗
PubMed1989

Energetics of cell-cell and cell-biopolymer interactions.

The energy vs distance balance of cell suspensions (in the presence and in the absence of extracellular biopolymer solutions) is studied, not only in the light of the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory (which considered just the electrostatic (EL) and Lifshitz-van der Waals (LW) interactions), but also by taking electron-acceptor/electron-donor, or Lewis acid-base (AB) and osmotic (OS) interactions into account. Since cell surfaces, as well as many biopolymers tend to have strong monopolar electron-donor properties, they are able to engage in a strong mutual AB repulsion when immersed in a polar liquid such as water. The effects of that repulsion have been observed earlier in the guise of hydration pressure. The AB repulsion is, at close range, typically one or two orders of magnitude stronger than the EL repulsion, but its rate of decay is much steeper. In most cases, AB interactions are quantitatively the dominant factor in cell stability (when repulsive) and in "hydrophobic interactions" (when attractive). OS interactions exerted by extracellularly dissolved biopolymers are weak, but their rate of decay is very gradual, so OS repulsions engendered by biopolymer solutions may be of importance in certain long-range interactions. OS interactions exerted by biopolymers attached to cells or particles (e.g., by glycocalix glycoproteins), are very short-ranged and usually are negligibly small in comparison with the other interaction forces, in aqueous media.

Acid-Base Equilibrium↗
PubMed2006

Sorption of organic contaminants by biopolymers: role of polarity, structure and domain spatial arrangement.

Sorption behavior of hydrophobic organic contaminants (HOCs) (i.e., pyrene, phenanthrene and naphthalene) by native and chemically modified biopolymers (lignin, chitin and cellulose) was examined. Lignins (native and treated) showed nonlinear sorption for all compounds studied, emphasizing their glassy character. Chitins and celluloses had linear isotherms for phenanthrene and naphthalene, illustrating the dominance of partitioning, while pyrene yielded nonlinear isotherms. Sorption capacity (K(oc)) of HOCs was negatively correlated with the polarity [(O+N)/C] of the biopolymers. Aromatic and alkyl+aromatic C percentages, rather than alkyl C content, demonstrated a better correlation with K(oc) values, indicating the importance of aromatic structures for HOC affinity. Hydrophobicity (K(ow))-normalized K(oc) values decreased sharply with increasing percentage of O-alkyl C versus total aliphatic C (O-alkyl C/total aliphatic C) or with polar C/(alkyl+aromatic C) ratio of the biopolymers until their values reached 80% and 4, respectively, illustrating the effect of surrounding polar groups on reducing affinity for HOCs. Overall, the results of this study highlight the role of spatial arrangement of domains within biopolymers in sorption of HOCs, and point to sorbent properties, such as functionality, polarity and structure, jointly regulating the sorption of HOCs in biopolymers.

Adsorption↗
PubMed2004

Crystallization of oxytetracycline from fermentation waste liquor: influence of biopolymer impurities.

Organic impurities in the fermentation broth of antibiotic production impose great difficulties in the crystallization and recovery of antibiotics from the concentrated waste liquor. In the present laboratory study, the inhibitory effect of biopolymers on antibiotic crystallization was investigated using oxytetracycline (OTC) as the model antibiotic. Organic impurities separated from actual OTC fermentation waste liquor by ultrafiltration were dosed into a pure OTC solution at various concentrations. The results demonstrated that small organic molecules with an apparent molecular weight (AMW) of below 10,000 Da did not affect OTC crystallization significantly. However, large biopolymers, especially polysaccharides, in the fermentation waste caused severe retardation of crystal growth and considerable deterioration in the purity of the OTC crystallized. Atomic force microscopy (AFM) revealed that OTC nuclei formed in the solution attached to the surfaces of large organic molecules, probably polysaccharides, instead of being surrounded by proteins as previously thought. It is proposed that the attachment of OTC nuclei to biopolymers would prevent OTC from rapid crystallization, resulting in a high OTC residue in the aqueous phase. In addition, the adsorption of OTC clusters onto biopolymers would destabilize the colloidal system of organic macromolecules and promote particle flocculation. OTC crystallization would therefore take place with the precipitation of abundant organic impurities. Hence, the removal of polysaccharides and other biopolymers by ultrafiltration can be an effective means of improving the recovery of OTC and similar antibiotics by crystallization from the fermentation waste.

Biopolymers↗
PubMed2001

Production of a biopolymer flocculant from Bacillus licheniformis and its flocculation properties.

Bacillus licheniformis CCRC 12826 produced extracellularly an excellent biopolymer flocculant in a large amount when it was grown aerobically in a culture medium containing citric acid, glutamic acid and glycerol as carbon sources. The biopolymer flocculant was an extremely viscous material with a molecular weight over 2 x 10(6) by gel permeation chromatography. It could be easily purified from the culture medium by ethanol precipitation. It was shown to be a homopolymer of glutamic acid by amino acid analysis and thin layer chromatography and presumed to be poly-glutamic acid (PGA). This bioflocculant efficiently flocculated various organic and inorganic suspensions. It flocculated a suspended kaolin suspension without cations, although its flocculating activity was synergistically stimulated by the addition of bivalent or trivalent cations Ca2+, Fe3+ and Al3+. However, the synergistic effects of metal cations were most effective at neutral pH ranges. The comparison of the flocculating activity between the present biopolymer and a commercial lower molecular weight product showed that the biopolymer of the present study had much higher activity. The high productivity and versatile applications of PGA make its development as a new biodegradable, harmless, biopolymer flocculant economical and advantageous.

Aerobiosis↗
PubMed2003

A temperature responsive biopolymer for mercury remediation.

Tunable biopolymers based on elastin-like polypeptides (ELP) were engineered for the selective removal of mercury. ELP undergoes a reversible thermal precipitation within a wide range of temperatures and was exploited to enable easy recovery of the sequestered mercury. A bacterial metalloregulatory protein, MerR, which binds mercury with an unusually high affinity and selectivity, was fused to the ELP to provide the highly selective nature of the biopolymers. Selective binding of mercury was demonstrated at an expected ratio of 0.5 mercury/biopolymer, and minimal binding of competing heavy metals (cadmium, nickel, and zinc), even at 100-fold excess, was observed. The sequestered mercury was extracted easily, enabling continuous reuse of the biopolymers. In repeating cycles, mercury concentration was reduced to ppb levels, satisfying even drinking water limits. Utility of the biopolymers with mercury-contaminated Lake Elsinore water was demonstrated with no decrease in efficiency. The nanoscale biopolymers reported here using metalloregulatory proteins represent a "green" technology for environmentally benign mercury removal. As nature offers a wide selection of specific metalloregulatory proteins, this technology offers promising solutions to remediation of other important pollutants such as arsenic or chromium.

Adsorption↗
PubMed2002

Mycelial growth and exo-biopolymer production by submerged culture of various edible mushrooms under different media.

AIMS: The effect of synthetic media on the submerged mycelial growth and exo-biopolymer production in various edible mushrooms was investigated in shake flask culture. METHODS AND RESULTS: Among 19 mushrooms examined, the relatively high yield in mycelial biomass and exo-biopolymer production was achieved in potato malt peptone (PMP) medium. In particular, Ganoderma lucidum NO. 1 and Phellinus linteus KCTC 6190 showed favourable growth in PMP medium with exo-biopolymer concentration of 1170 and 1520 mg l(-1), respectively. CONCLUSIONS: Enhanced exo-biopolymer production was achieved from Ganoderma lucidum NO. 1 and Phellinus linteus KCTC 6190 in a 5L batch fermentor, indicating approximately 5000 and 2410 mg l(-1), respectively. SIGNIFICANCE AND IMPACT OF THE STUDY: The exo-biopolymer production and mycelial growth from various mushrooms were found to be strongly controlled by different complex media.

Agaricales↗
PubMed2002

Effect of agitation intensity on the exo-biopolymer production and mycelial morphology in Cordyceps militaris.

AIMS: The influence of agitation intensity on Cordyceps militaris morphology and exo-biopolymer production was investigated in a 5 litre stirred vessel using a six-blade Rushton turbine impeller. METHODS AND RESULTS: The mycelial morphology of C. militaris was characterized by means of image analysis, which included mean diameter, circularity, roughness and compactness of the pellets. The morphological parameters of the pellets grown under different stirring conditions were significantly different, which correspondingly altered exo-biopolymer production yields. CONCLUSIONS: The compactness of the pellets was found to be the most critical parameter affecting exo-biopolymer biosynthesis; more compact pellets were formed at 150 rev min(-1) with maximum exo-biopolymer production (15 g l(-1)). SIGNIFICANCE AND IMPACT OF THE STUDY: The results of this study suggest that morphological change of pellets is a good indicator for identifying the cell activity for exo-biopolymer production.

Biopolymers↗
PubMed2005

Evaluation of biopolymer-modified concrete systems for disposal of cathode ray tube glass.

Cathode ray tubes (CRTs) from computer monitors and television sets, which contain significantly high percentage of lead (Pb) by weight, represent an enormous and growing hazardous waste problem in the United States and worldwide. As a result, new technologies are needed to cope with current CRT waste stream and increased hazard and build new markets for its recycled components, developing commercially viable concrete composites, as well as minimizing CRT disposal problems. In this study, commercially available biopolymers, such as xanthan gum, guar gum, and chitosan, were used to encapsulate CRT glass waste, reducing the Pb leachability. The biopolymers utilized contain a number of useful functional groups, such as carboxyl (xanthan), hydroxyl (guar), and amino groups (chitosan), which play important roles in binding and stabilizing Pb onto concrete structures. The use of biopolymers in concrete systems can create a stable interpenetrating cross-linking composite that will last for many years. Results from these new composites show 30% higher compressive strength than standard concrete and a sharp decrease in lead leachability from several thousand milligrams per liter initially to an amount of three-tenths milligrams per liter or lower values (much lower than the U.S. Environment Protection Agency standard for hazardous waste of 5 mg/L by the toxicity characteristic leaching procedure test), and for some of the composites leachability is below even the standard for drinking water. This efficient and cost-effective CRT-biopolymer-concrete composite is a new class of biopolymer-modified material that can potentially perform a significant role in relieving the current CRT issue.

Biopolymers↗