Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Aluminum Silicates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed2003

Final report on the safety assessment of aluminum silicate, calcium silicate, magnesium aluminum silicate, magnesium silicate, magnesium trisilicate, sodium magnesium silicate, zirconium silicate, attapulgite, bentonite, Fuller's earth, hectorite, kaolin, lithium magnesium silicate, lithium magnesium sodium silicate, montmorillonite, pyrophyllite, and zeolite.

This report reviews the safety of Aluminum, Calcium, Lithium Magnesium, Lithium Magnesium Sodium, Magnesium Aluminum, Magnesium, Sodium Magnesium, and Zirconium Silicates, Magnesium Trisilicate, Attapulgite, Bentonite, Fuller's Earth, Hectorite, Kaolin, Montmorillonite, Pyrophyllite, and Zeolite as used in cosmetic formulations. The common aspect of all these claylike ingredients is that they contain silicon, oxygen, and one or more metals. Many silicates occur naturally and are mined; yet others are produced synthetically. Typical cosmetic uses of silicates include abrasive, opacifying agent, viscosity-increasing agent, anticaking agent, emulsion stabilizer, binder, and suspending agent. Clay silicates (silicates containing water in their structure) primarily function as adsorbents, opacifiers, and viscosity-increasing agents. Pyrophyllite is also used as a colorant. The International Agency for Research on Cancer has ruled Attapulgite fibers >5 microm as possibly carcinogenic to humans, but fibers <5 microm were not classified as to their carcinogenicity to humans. Likewise, Clinoptilolite, Phillipsite, Mordenite, Nonfibrous Japanese Zeolite, and synthetic Zeolites were not classified as to their carcinogenicity to humans. These ingredients are not significantly toxic in oral acute or short-term oral or parenteral toxicity studies in animals. Inhalation toxicity, however, is readily demonstrated in animals. Particle size, fibrogenicity, concentration, and mineral composition had the greatest effect on toxicity. Larger particle size and longer and wider fibers cause more adverse effects. Magnesium Aluminum Silicate was a weak primary skin irritant in rabbits and had no cumulative skin irritation in guinea pigs. No gross effects were reported in any of these studies. Sodium Magnesium Silicate had no primary skin irritation in rabbits and had no cumulative skin irritation in guinea pigs. Hectorite was nonirritating to the skin of rabbits in a Draize primary skin irritation study. Magnesium Aluminum Silicate and Sodium Magnesium Silicate caused minimal eye irritation in a Draize eye irritation test. Bentonite caused severe iritis after injection into the anterior chamber of the eyes of rabbits and when injected intralamellarly, widespread corneal infiltrates and retrocorneal membranes were recorded. In a primary eye irritation study in rabbits, Hectorite was moderately irritating without washing and practically nonirritating to the eye with a washout. Rats tolerated a single dose of Zeolite A without any adverse reaction in the eye. Calcium Silicate had no discernible effect on nidation or on maternal or fetal survival in rabbits. Magnesium Aluminum Silicate had neither a teratogenic nor adverse effects on the mouse fetus. Female rats receiving a 20% Kaolin diet exhibited maternal anemia but no significant reduction in birth weight of the pups was recorded. Type A Zeolite produced no adverse effects on the dam, embryo, or fetus in either rats or rabbits at any dose level. Clinoptilolite had no effect on female rat reproductive performance. These ingredients were not genotoxic in the Ames bacterial test system. In primary hepatocyte cultures, the addition of Attapulgite had no significant unscheduled DNA synthesis. Attapulgite did cause significant increases in unscheduled DNA synthesis in rat pleural mesothelial cells, but no significant increase in sister chromosome exchanges were seen. Zeolite particles (<10 microm) produced statistically significant increase in the percentage of aberrant metaphases in human peripheral blood lymphocytes and cells collected by peritoneal lavage from exposed mice. Topical application of Magnesium Aluminum Silicate to human skin daily for 1 week produced no adverse effects. Occupational exposure to mineral dusts has been studied extensively. Fibrosis and pneumoconiosis have been documented in workers involved in the mining and processing of Aluminum Silicate, Calcium Silicate, Zirconium Silicate, Fuller's Earth, Kaolin, Montmorillonite, Pyrophyllite, and Zeolite. The Cosmetic Ingredient Review (CIR. The Cosmetic Ingredient Review (CIR) Expert Panel concluded that the extensive pulmonary damage in humans was the result of direct occupational inhalation of the dusts and noted that lesions seen in animals were affected by particle size, fiber length, and concentration. The Panel considers that most of the formulations are not respirable and of the preparations that are respirable, the concentration of the ingredient is very low. Even so, the Panel considered that any spray containing these solids should be formulated to minimize their inhalation. With this admonition to the cosmetics industry, the CIR Expert Panel concluded that these ingredients are safe as currently used in cosmetic formulations. The Panel did note that the cosmetic ingredient, Talc, is a hydrated magnesium silicate. Because it has a unique crystalline structure that differs from ingredients addressed in this safety assessment, Talc is not included in this report.

Animals↗
PubMed1984

Adjuvant effects of aluminum silicate on IgE and IgG1 antibody production in mice.

The adjuvant effects of aluminum silicate on IgE and IgG1 antibody production were investigated. BALB/c mice were immunized intraperitoneally with 10 micrograms ovalbumin (OA) adsorbed on 0.2, 2, or 20 mg aluminum silicate. The enhancement of anti-OA IgE antibody production was observed in the mice injected with aluminum silicate and antigen compared with the mice injected with antigen alone. Anti-OA IgE antibody production with 2 and 20 mg aluminum silicate was greater than that with aluminum hydroxide (alum) as an adjuvant. Similar adjuvant effects with 2 mg aluminum silicate or alum were observed in AKR and C57BL/6 mice using 10 micrograms OA, and in BALB/c mice using 2 micrograms DNP-KLH (dinitrophenyl keyhole limpet hemocyanin): IgE antibody production induced by aluminum silicate adjuvant persisted for weeks in these experiments. The enhancement of IgG1 antibody production to OA mixed with aluminum silicate was also demonstrated. However, no difference between aluminum silicate and alum was observed on the IgG1 antibody production.

Adjuvants, Immunologic↗
PubMed1992

Interaction between polyethylene films and bromhexine HCl in solid dosage form. IV. Prevention of the sorption by addition of magnesium aluminum silicate.

The effects of magnesium aluminum silicate (MAS) addition on the sorption of bromhexine HCl to polyethylene film in tablets were studied. The addition of MAS prevented the sorption of bromhexine HCl to polyethylene film. In order to investigate the mechanism, the interaction between bromhexine HCl and MAS was studied by the powder X-ray diffraction method. It was observed that bromhexine HCl was preferentially adsorbed to the surface of MAS rather than to polyethylene film. The adsorption was accelerated at high temperature and reduced pressure conditions. The sorption of bromhexine base and bromhexine HCl to packaging material were compared using tablet dosage forms. The sorption of bromhexine base to polyethylene film was greater than that of bromhexine HCl.

Aluminum Compounds↗
PubMed1993

Dialysis-associated arthropathy: secondary ion mass spectrometry evidence of aluminum silicate in beta 2-microglobulin amyloid synovial tissue and articular cartilage.

The role of aluminum accumulation in articular tissues of patients affected by dialysis-associated arthropathy (DAA) is questioned. The aim of this work is to identify the nature of these aluminum accumulations by the use of secondary ion mass spectrometry (SIMS). Al/Si ratios of about 1, measured by SIMS, strongly suggest for the first time the presence of aluminum silicates and possibly aluminum hydroxides in amyloid synovial tissue and articular cartilage of 1 patient with DAA and aluminum intoxication. This is thermodynamically consistent with the total dissolved Al and Si contents and pH measured in the synovial fluids. These results are similar to the abnormal Al distribution recently found by SIMS in the forebrain of chronic renal dialysis patients and to the amorphous aluminum silicates identified in the core of senile plaques in Alzheimer's disease.

Aluminum Silicates↗
PubMed1993

Aluminum silicate toxicity in cell cultures.

To assess the cytotoxicity of four clays containing an aluminum silicate--montmorillonite, bentonite, kaolinite and erionite--we used human umbilical vein endothelial, N1E-115 neuroblastoma, and ROC-1 oligodendroglial cells. Morphological examination, lactate dehydrogenase release and fatty acid release were used as indices of trauma. The clays were added in suspension to the cell cultures at concentrations of 0.1, 0.03 and 0.01 mg/ml of medium and the cells were incubated for 1, 6 and 24 h. The clays did not lyse ROC-1 and N1E-115 cells and did not cause a dose-dependent increase in fatty acid levels at 24 h. There were no significant increases in lactate dehydrogenase activity in N1E-115 neuroblastoma or ROC-1 oligodendroglial cells. In human umbilical vein endothelial cells, montmorillonite, kaolinite and bentonite caused a dose-dependent increase in fatty acids at 24 h. All three clays caused cell lysis. We postulate that the cytotoxicity of the clays containing an aluminum silicate towards endothelial cells may disrupt the blood-brain barrier in the affected areas, allowing the entry of the clay particle into the brain. Aluminum silicate clays caused a dose-dependent release of fatty acids in human umbilical vein endothelial cells. The clays also caused lysis of these cells. ROC-1 oligodendroglia and N1E-115 neuroblastoma cells were not lysed by the clays, suggesting that this is not a general phenomenon.

Aluminum Silicates↗
PubMed1979

Studies of prophylaxis pastes containing sodium-potassium aluminum silicate and fluoride.

A sodium-potassium aluminum silicate cleaning and polishing agent was compared with conventional prophylaxis abrasives and was found to be highly compatible with fluoride. When formulated into a fluoride prophylaxis paste, especially with stannous fluoride, a larger reduction in enamel solubility and greater fluoride uptake were obtained with representative commercial prophylaxis pastes.

Aluminum Silicates↗
PubMed1986

Induction of IgE antibody production to aerosolized ovalbumin in mice treated intratracheally with aluminum silicate.

Induction of IgE antibody production was studied in mice with aerosolized antigen exposure and intratracheal instillation of adjuvants. BALB/c mice were immunized intratracheally with 10 micrograms ovalbumin (OA) adsorbed with or without aluminum silicate as an adjuvant. A primary IgE antibody production was observed in mice immunized with OA plus adjuvant, but not with OA alone. In mice immunized with OA plus adjuvant, a secondary IgE antibody production was observed after a booster of OA aerosol exposure on day 28. Mice were instilled intratracheally with aluminum silicate or aluminum hydroxide (alum) and subsequently exposed to aerosolized OA for 30 min. Primary and secondary anti-OA IgE antibody productions were obtained in the groups instilled with the adjuvants. After the intratracheal instillation of alum, aluminum remained in the mice for a long period. These results suggest that the intratracheal instillation of adjuvants is effective in the induction of IgE antibody production by aerosolized antigen exposure.

Adjuvants, Immunologic↗
PubMed1992

An aluminum silicate binding assay for quantitation of degradation of cholecystokinin octapeptide and other short peptides.

Most available techniques for the quantitation of enzymatic degradation of peptide hormones are time-consuming and require expensive equipment and/or novel reagents. Our aim here was to develop a rapid and sensitive assay for the measurement of degradation of cholecystokinin octapeptide (CCK-8) as well as other short, hydrophobic peptides. The proposed technique is based on our novel observation that intact CCK-8, but not its degradation product(s), binds to Lloyd reagent, a form of aluminum silicate. When radiolabeled CCK-8 was exposed to rat liver cytosol containing endogenous CCK-degrading activity, there was a time-dependent decrease in the binding of radiolabel to aluminum silicate [from 86 to 8% over 60 min at 37 degrees C]. The decrease in binding closely paralleled the extent of CCK-8 degradation over time as assessed by high-performance liquid chromatography and immunoprecipitation with specific polyclonal antibodies to CCK-8. While aluminum silicate did not efficiently bind to C-terminal and N-terminal CCK tetrapeptides, magnesium silicate bound to both tetrapeptides (> 82%), but not to their radiolabeled degradation products. Both aluminum and magnesium silicate also extensively bound (> 82%) to other peptide hormones including Met-enkephalin, somatostatin, and secretin, but did not bind their degradation products. These binding assays will be useful in studies of peptidases which degrade cholecystokinin or other small, hydrophobic peptides.

Aluminum Silicates↗
PubMed1993

Cytotoxicity of aluminum silicates in primary neuronal cultures.

To study their cytotoxicity, clays containing aluminum silicates were added to cultures of primary murine spinal cord neurons and differentiated N1E-115 neuroblastoma cells. Bentonite (0.1 mg/ml) and montmorillonite (0.1 mg/ml) rapidly associated with the outer membrane of both N1E-115 and neuronal cells. Erionite (0.1 mg/ml) was randomly distributed throughout the culture. Both bentonite and montmorillonite caused complete cell lysis in the neuronal cultures within 60 min following addition. Erionite had no effect. None of the clays appeared to be cytotoxic to the differentiated N1E-115 cells even though bentonite and montmorillonite were closely associated with the cell membrane. N1E-115 cell lysis did not occur up to 18 h after addition of the clay. Aluminum silicate-containing clays caused a rapid lysis of primary neuronal cells. Differentiated N1E-115 neuroblastoma cells were not susceptible to clay-induced lysis, suggesting that the lytic mechanism is not a general phenomenon that affects all cell types equally.

Aluminum Silicates↗
PubMed2002

Evaluation of aluminum-silicate polymer composite as a coagulant for water treatment.

Aluminum-silicate polymer composite (PASiC), a new kind of inorganic coagulant, was produced by two approaches: (1) hydroxylation of the mixture of AlCl3 and fresh polysilicate (PASiCc); (2) hydroxylated polyaluminum-chloride (PAC) combined with fresh polysilicate (PASiCm). The PASiC products had the following properties: Al2O3 content = 6.40-7.30%, SiO2 content = 0.40-0.82%, Al/Si ratios = 10-20, basicity (OH/Al molar ratio, denoted B) = 1.2-2.0. The coagulation behaviour of PASiC and PAC under conditions typical for coagulation and flocculation in water treatment were investigated by studying the rate of floc size development, the variety of streaming current value, the efficiency of turbidity removal and the effect of pH on the turbidity removal efficiency, and the stability of PASiC. The results detailed in this study suggest that, compared with PAC, PASiC may enhance aggregating efficiency and give better coagulating effects, but weaken charge effectiveness in coagulation process or become unstable when stored for longer time, especially at higher B value and lower Al/Si ratio. The coagulating effect of PASiC is closely linked to the preparation procedure. With the increase of B value and the decrease of Al/Si ratio, the coagulation efficiency of PASiC increases, and at the same B value and Al/Si ratio, PASiCc seems to give a little better coagulation effect than PASiCm but less stability. The Al/Si ratio should not be too low or the B value should not be too high, otherwise, the PASiC products tend to become cloudy or partly gelatinous, which will make them loss some coagulation efficiency.

Aluminum Silicates↗
PubMed2004

Structure and diffusion in amorphous aluminum silicate: a molecular dynamics computer simulation.

The amorphous aluminum silicate (Al2O3)2(SiO2) [AS2] is investigated by means of large scale molecular dynamics computer simulations. We consider fully equilibrated melts in the temperature range 6100 K> or =T> or =2300 K as well as glass configurations that were obtained from cooling runs from T=2300 to 300 K with a cooling rate of about 10(12) K/s. Already at temperatures as high as 4000 K, most of the Al and Si atoms are fourfold coordinated by oxygen atoms. Thus, the structure of AS2 is that of a disordered tetrahedral network. The packing of AlO4 tetrahedra is very different from that of SiO4 tetrahedra in that Al is involved with a relatively high probability in small-membered rings and in triclusters in which an O atom is surrounded by four cations. We find as typical configurations two-membered rings with two Al atoms in which the shared O atoms form a tricluster. On larger length scales, the system shows a microphase separation in which the Al-rich network structure percolates through the SiO2 network. The latter structure gives rise to a prepeak in the static structure factor at a wave number q=0.5 A(-1). A comparison of experimental x-ray data with the results from the simulation shows good agreement for the structure function. The diffusion dynamics in AS2 is found to be much faster than in SiO2. We show that the self-diffusion constants for O and Al are very similar and that they are by a factor of 2-3 larger than the one for Si.

Journal Article↗
PubMed2006

Dispersion and thermal properties of lithium aluminum silicate glasses doped with Cr3+ ions.

A series of new lithium aluminum silicate (LAS) glass systems doped with chromium ion is prepared. The reflectance and transmittance of the glass slabs are recorded. By means of an iteration procedure, the glass refractive index n and the extinction coefficient k and their dispersions are obtained. Across a wide spectral range of 0.2-1.6 microm, the dispersion curves are used to determine the atomic and quantum constants of the prepared glasses. These findings provide the average oscillator wavelength, the average oscillator strength, oscillator energy, dispersion energy, lattice energy, and material dispersion of the glass materials to be calculated. For optical waveguide applications, the wavelength for zero material dispersion is obtained. Dilatometric measurements are performed and the thermal expansion coefficient is calculated to throw some light on the thermo-optical properties of the present glasses correlating them with their structure and the presence of nonbridging oxygen ions.

Journal Article↗
PubMed2005

Investigation of novel alginate-magnesium aluminum silicate microcomposite films for modified-release tablets.

Physicochemical properties of sodium alginate-magnesium aluminum silicate (SA-MAS) composite films were investigated and a potential as a film former of SA-MAS dispersion for modifying drug release from tablets was evaluated as well. Interaction between SA and MAS in the composite films was revealed using FTIR spectroscopy. Thermal behavior of the composite films was changed due to the complexation of SA and MAS. Powder X-ray diffractometry data suggested that a higher crystallinity of the composite film and a phase-separated microcomposite were formed. The composite films in the ratios of 1:0.5 and 1:1 showed the increases of tensile strength and percentage of elongation when compared with SA films. Water vapor permeability of the composite films tended to increase with increasing ratio of MAS. The decreases in water uptake and drug permeability in 0.1 M HCl were found in the composite films. A positive charge drug, propranolol HCl, provided a higher affinity on the composite films than a weakly acidic nonelectrolyte, acetaminophen, resulting in a longer lag time and a higher partition coefficient depending on the content of MAS in the composite films. This was due to the complex formation of propranolol HCl and MAS. Using SEM, the tablets coated with SA-MAS dispersion had a smooth surface, while those with SA dispersion showed a pinholing on the surface, resulting in a faster drug release. The drug release profiles of the tablets could be modified by coating with the composite film at different coating levels. This finding suggests that MAS could improve physicochemical properties of the SA films, leading to a novel coating material of the SA-MAS dispersion for modifying drug release from tablets.

Absorption↗
PubMed2000

Delayed-hypersensitivity granulomatous reaction induced by blepharopigmentation with aluminum-silicate.

Blepharopigmentation has been introduced during the last decade as a technique for creating a permanent line along the eyelid margin, thus simulating a cosmetic eyeliner. Complications related to this procedure are mostly reported in the opthalmologic literature describing infectious, allergic, or technical problems. We report a case of a woman who underwent blepharopigmentation with aluminum-silicate and in whom a delayed hypersensitivity granulomatous reaction developed.

Aluminum Silicates↗
PubMed1980

Fibrous ceramic aluminum silicate as an alternative to asbestos liners.

The actual risk to those exposed to asbestos fibers in the dental laboratory is presently unknown. The ADA Council on Dental Materials and Devices and ADA Council on Dental Therapeutics have received encouragement from the National Institute for Occupational Safety and Health to conduct further studies, including monitoring airborne asbestos in dental laboratories. It has been suggested that no really safe threshold limit exists for airborne asbestos fibers. Low level asbestos exposure has been implicated in numerous serious diseases. Exposures as brief as 1 month have produced disease many years later. Numerous researchers have advocated the use of a safer material. Casting ring liners compound of currently available fibrous ceramic aluminum silicate are technically adequate substitutes for asbestos.

Aluminum Silicates↗
PubMed2005

Molecular interaction in alginate beads reinforced with sodium starch glycolate or magnesium aluminum silicate, and their physical characteristics.

Diclofenac calcium-alginate (DCA) beads were reinforced with different amounts of sodium starch glycolate (SSG) or magnesium aluminum silicate (MAS) and were prepared using ionotropic gelation method. Complex formation of sodium alginate (SA) and SSG or MAS in calcium-alginate beads was revealed using FTIR spectroscopy. Differential scanning calorimetric study indicated that diclofenac sodium (DS) in amorphous form was dispersed in the matrix of DCA beads. The thermal behavior of SSG-DCA and MAS-DCA beads was similar to the control bead. Both additives can improve the entrapment efficiency of DCA beads. The swelling and water uptake of the beads depended on the properties of incorporated additives. The SSG-DCA beads showed a higher water uptake and swelling than MAS-DCA beads. Moreover, the swelling of the beads showed a good correlation with the square root of time. The release kinetic of the beads in pH 6.8 phosphate buffer was swelling controlled mechanism, while that in distilled water followed Higuchi's model. The slower release rate and the longer lag time in pH 6.8 phosphate buffer was obtained from the SSG-DCA and MAS-DCA beads because of complex formation between SA and SSG or MAS. However, SSG in the beads could increase the release of DS from the beads in distilled water because it acted as a channeling agent. In contrast, MAS retarded the release of DS from the beads in distilled water due to the stronger matrix formation.

Alginates↗