Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “polymerization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99Linked to original sources
PubMed2007

Aluminum and zinc complexes based on an amino-bis(pyrazolyl) ligand: synthesis, structures, and use in MMA and lactide polymerization.

The coordination chemistry of bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine (1, LH) with aluminum- and zinc-alkyls has been studied. Reaction of 1 with AlR3 affords the adducts [LH] x AlR3 (R = Me, 2; Et, 3), which undergo alkane elimination upon heating to yield the amido complexes [L]AlR2 (R = Me, 4; Et, 5). Reaction of LiO(iPrO)C=CMe2 with 2 proceeds via N-H deprotonation to give Li[L]AlMe3 (6), while the former enolate adds to 4 to generate [Me2C=C(OiPr)OLi] x [L]AlMe2 (7). Similarly, the 1:1 reaction of ZnEt2 with 1 gives [LH] x ZnEt2 (9), which is transformed into [L]ZnEt (10) upon heating. When an excess of ZnEt2 was used in the latter reaction, the bimetallic complex [L]ZnEt x ZnEt2 (11) was isolated beside 10. Performing the same reaction in the presence of O2 traces yielded selectively the dinuclear ethyl-ethoxide complex [L]Zn2Et2(mu-OEt) (12), which was alternatively prepared from the reaction of 10 and ZnEt(OEt). Zinc chloride complexes [LH] x ZnRCl (R = Et, 13; p-CH3C6H4CH2, 14) and [L]ZnCl (15) were prepared in high yields following similar strategies. Ethyl abstraction from 10 with B(C6F5)3 yields [L]Zn+EtB(C6F5)3- (16). All complexes have been characterized by multinuclear nuclear magnetic resonance (NMR), elemental analysis, and single-crystal X-ray diffraction studies for four-coordinate Al complexes 2, 4, and 6 and Zn complexes 9-12 and 14. Aluminate species 6 and 7 initiate the polymerization of methyl methacrylate, and the monomer conversions are improved in the presence of neutral complexes 2 or 4, respectively; however, these methyl methacrylate (MMA) polymerizations are uncontrolled. Polymerization of rac-lactide takes place at 20 degrees C in the presence of zinc ethoxide complex 12 to yield atactic polymers with controlled molecular masses and relatively narrow polydispersities.

Aluminum↗
PubMed1997

In Situ, Time-Resolved X-ray Diffraction Study of the Solid-State Polymerization of Disulfur Dinitride to Poly(sulfur nitride).

Products and kinetic and mechanistic aspects of the title reaction were investigated by time-resolved X-ray powder diffraction combined with Rietveld refinement. The polymerization of S(2)N(2) at 40 degrees C was monitored with a time resolution better than one diffraction pattern per minute until completion. The reaction product comprised a mixture of monoclinic beta-(SN)(x)() (90%) and an additional orthorhombic phase, identified as alpha-(SN)(x)() (about 10%). The inversely proportional conversion/formation vs time curves for educt and products indicate that the reaction involves only crystalline phases. The cell parameters of polymerizing S(2)N(2) varied noticeably with progressing conversion, whereas the cell volume remained unchanged up to a monomer conversion of 50%. Refinement of atomic coordinates for S and N indicated retention of the reactant geometry. It is concluded that the polymerization of S(2)N(2) to (SN)(x)() is of nondiffusive nature and involves a martensitic transition.

Journal Article↗
PubMed2000

Heterometallic polymeric clusters containing tetraselenotungstate anion: one-dimensional helical chain [[La(Me2SO)8.

[PPh4]2[WSe4] reacts with an equivalent of [Ag(MeCN)4][ClO4] in DMF to afford a linear polymeric cluster [[Ph4P][(mu-WSe4)Ag]]n (1). Treatment of cluster 1 with excess La(NO3)3.3H2O in Me2SO solution resulted in the formation of a helical chain polymeric cluster [[La(Me2SO)8][(mu-WSe4)3Ag3]]n (2). Cluster 2 crystallizes in the monoclinic space group P2(1/n) with four formula units in a cell of dimensions a = 12.7642(5) A, b = 24.1725(9) A, c = 19.4012(7) A, and beta = 103.546(11) degrees. Refinement by full-matrix least-squares techniques gave final residuals R = 0.0540 and Rw = 0.1116 for 494 variables and 7593 reflections (Fo(2) > 2.0sigma(Fo(2))). The anion [[(mu-WSe4)3Ag3]]n(3n-) in 2 can be described as a butterfly-type SeWSe3Ag2 basic repeating unit linked through interactions with a Ag atom of one fragment and a Ag atom of another to form an intriguing helical array. The CuCN, KCN, and [Et4N]2[WSe4] reaction system resulted in the formation of a novel three-dimensional cluster [[Et4N]2[(mu4-WSe4)Cu4(CN)4]]n (4) either in DMF/2-picoline or in solid at 80 degrees C. Cluster 4 crystallizes in the orthorhombic space group Fddd with cell constants a = 11.090(2) A, b = 23.206(5) A, c = 23.910(5) A, and Z = 8. Anisotropic refinement with 1510 reflections (Fo(2) > 2.0sigma(Fo(2))) and 82 parameters for all non-hydrogen atoms yielded the values of R = 0.0428 and Rw = 0.0887. The anion structure of 4 is built up from a WSe4Cu4 unit bridged by cyanide ligands to form a three-dimensional cross framework. The air- and moisture-stable polymeric clusters easily decompose into small molecular clusters when treated with ligands such as PPh3 and pyridine (Py). Cluster 2 exhibits both strong optical absorption and an optical self-focusing effect (effective alpha2 = 2.2 x 10(-9) m2.W(-1), n2 = 6.8 x 10(-15) m2.W(-1); examined in a 0.13 mM DMF solution). Cluster 4 shows good photostability in the process of measurement and a large optical limiting effect (the limiting threshold is ca. 0.2 J.cm(-2)).

Journal Article↗
PubMed2001

Supported metallocene catalysts by surface organometallic chemistry. Synthesis, characterization, and reactivity in ethylene polymerization of oxide-supported mono- and biscyclopentadienyl zirconium alkyl complexes: establishment of structure/reactivity relationships.

The reactions of CpZr(CH(3))(3), 1, and Cp(2)Zr(CH(3))(2), 2, with partially dehydroxylated silica, silica-alumina, and alumina surfaces have been carried out with careful identification of the resulting surface organometallic complexes in order to probe the relationship between catalyst structure and polymerization activity. The characterization of the supported complexes has been achieved in most cases by in situ infrared spectroscopy, surface microanalysis, qualitative and quantitative analysis of evolved gases during surface reactions with labeled surface, solid state (1)H and (13)C NMR using (13)C-enriched compounds, and EXAFS. 1 and 2 react with silica(500) and silica-alumina(500) by simple protonolysis of one Zr-Me bond by surface silanols with formation of a single well-defined neutral compound. In the case of silica-alumina, a fraction of the supported complexes exhibits some interactions with electronically unsaturated surface aluminum sites. 1 and 2 also react with the hydroxyl groups of gamma-alumina(500), leading to several surface structures. Correlation between EXAFS and (13)C NMR data suggests, in short, two main surface structures having different environments for the methyl group: [Al](3)-OZrCp(CH(3))(2) and [Al](2)-OZrCp(CH(3))(mu-CH(3))-[Al] for the monoCp series and [Al](2)-OZrCp(2)(CH(3)) and [Al]-OZrCp(2)(mu-CH(3))-[Al] for the bisCp series. Ethylene polymerization has been carried out with all the supported complexes under various reaction conditions. Silica-supported catalysts in the absence of any cocatalyst exhibited no activity whatsoever for ethylene polymerization. When the oxide contained Lewis acidic sites, the resulting surface species were active. The activity, although improved by the presence of additional cocatalysts, remained very low by comparison with that of the homogeneous metallocene systems. This trend has been interpreted on the basis of various possible parameters, including the (p-pi)-(d-pi) back-donation of surface oxygen atoms to the zirconium center.

Journal Article↗
PubMed2002

Polymeric complexes of silver(I) with diphosphine ligands: self-assembly of a puckered sheet network structure.

The syntheses and structures of polymeric silver(I)-diphosphine complexes are reported, in which the silver(I) center is surrounded by 1, 2, or 3 phosphorus atoms. When rigid diphosphine ligands are used in combination with weakly coordinating anions, linear polymers are obtained that contain both diphosphine and anion bridges. However, with excess of a diphosphine with a long, flexible, spacer group, a remarkable puckered sheet structure, comprised of fused giant 54-membered rings, is obtained that is a coordination polymer analogue of laminated materials such as micas and clays. The polymeric chain and sheet structures may be considered to be formed by ring-opening polymerization of cyclic precursors.

Journal Article↗
PubMed2002

Ordered morphologies in polymeric films produced by replication of convection patterns.

A new strategy for producing ordered polymeric films is proposed, which employs replication of interfacial instabilities. In the first step, a thin film of a monomeric fluid is brought in contact with a nonpolymerizable template layer of poly(dimethylsiloxane), and surface tension-driven convection is induced in the template liquid. In the second stage, Bénard cells replicated in the monomeric layer by a viscous drug are trapped in the solid state by UV-induced polymerization. Following this step, the template fluid is removed. The topographic patterns "frozen" in the polymeric film have lateral and vertical periodicity determined by the properties of the template fluid.

Journal Article↗
PubMed2001

Kinetics of initiation, propagation, and termination for the [rac-(C(2)H(4)(1-indenyl)(2))ZrMe][MeB(C(6)F(5))(3)]-catalyzed polymerization of 1-hexene.

Metallocene-catalyzed polymerization of 1-alkenes offers fine control of critical polymer attributes such as molecular weight, polydispersity, tacticity, and comonomer incorporation. Enormous effort has been expended on the synthesis and discovery of new catalysts and activators, but elementary aspects of the catalytic processes remain unclear. For example, it is unclear how the catalyst is distributed among active and dormant sites and how this distribution influences the order in monomer for the propagation rates, for which widely varying values are reported. Similarly, although empirical relationships between average molecular weights and monomer have been established for many systems, the underlying mechanisms of chain termination are unclear. Another area of intense interest concerns the role of ion-pairing in controlling the activity and termination mechanisms of metallocene-catalyzed polymerizations. Herein we report the application of quenched-flow kinetics, active site counting, polymer microstructure analysis, and molecular weight distribution analysis to the determination of fundamental rate laws for initiation, propagation, and termination for the polymerization of 1-hexene in toluene solution as catalyzed by the contact ion-pair, [rac-(C(2)H(4)(1-indenyl)(2))ZrMe][MeB(C(6)F(5))(3)] (1) over the temperature range of -10 to 50 degrees C. Highly isotactic (>99% mmmm) poly-1-hexene is produced with no apparent enchained regioerrors. Initiation and propagation processes are first order in the concentrations of 1-hexene and 1 but independent of excess borane or the addition of the contact ion-pair [PhNMe(3)][MeB(C(6)F(5))(3)]. Active site counting and the reaction kinetics provide no evidence of catalyst accumulation in dormant or inactive sites. Initiation is slower than propagation by a factor of 70. The principal termination process is the formation of unsaturates of two types: vinylidene end groups that arise from termination after a 1,2 insertion and vinylene end groups that follow 2,1 insertions. The rate law for the former termination process is independent of the 1-hexene concentration, whereas the latter is first order. Analysis of (13)C-labeled polymer provides support for a mechanism of vinylene end group formation that is not chain transfer to monomer. Deterministic modeling of the molecular weight distributions using the fundamental rate laws and kinetic constants demonstrates the robustness of the kinetic analysis. Comparisons of insertion frequencies with estimated limits on the rates of ion-pair symmetrization obtained by NMR suggest that ion-pair separation prior to insertion is not required, but the analysis requires assumptions that cannot be validated.

Alkenes↗
PubMed2002

The boron-catalyzed polymerization of dimethylsulfoxonium methylide. A living polymethylene synthesis.

Trialkyl and aryl organoboranes catalyze the polymerization of dimethylsulfoxonium methylide (1). The product of the polymerization is a tris-polymethylene organoborane. Oxidation affords linear telechelic alpha-hydroxy polymethylene. The polymer molecular weight was found to be directly proportional to the stoichiometric ratio of ylide/borane, and polydispersities as low as 1.01-1.03 have been realized. Although oligomeric polymethylene has been the most frequent synthetic target of this method, polymeric star organoboranes with molecular weights of 1.5 million have been produced. The average turnover frequency at 120 degrees C in 1,2,4,5-tetrachlorobenzene/toluene is estimated at >6 x 10(6) g of polymethylene (mol boron)(-1) h(-1). The mechanism of the polyhomologation reaction involves initial formation of a zwitterionic organoborane.ylide complex which breaks down in a rate-limiting 1,2-alkyl group migration with concomitant expulsion of a molecule of DMSO. The reaction was found to be first order in the borane catalyst and zero order in ylide. DMSO does not interfere with the reaction. The temperature dependence of the reaction rate yielded the following activation energy parameters (toluene, DeltaH(++) = 23.2 kcal/mol, DeltaS(++) = 12.6 cal deg/mol, DeltaG(++) = 19.5 kcal/mol; THF, DeltaH(++) = 26.5 kcal/mol, DeltaS(++) = 21.5 cal deg/mol, DeltaG(++) = 20.1 kcal/mol).

Journal Article↗
PubMed2002

Nucleophilically assisted and cationic ring-opening polymerization of tin-bridged [1]ferrocenophanes.

To obtain mechanistic insight, detailed studies of the intriguing "spontaneous" ambient temperature ring-opening polymerization (ROP) of tin-bridged [1]ferrocenophanes Fe(eta-C(5)H(4))(2)SnR(2) 3a (R = t-Bu) and 3b (R = Mes) in solution have been performed. The investigations explored the influence of non-nucleophilic additives such as radicals and radical traps, neutral and anionic nucleophiles, Lewis acids, protic species, and other cationic electrophiles. Significantly, two novel methodologies and mechanisms for the ROP of strained [1]ferrocenophanes are proposed based on this study. First, as the addition of amine nucleophiles such as pyridine was found to strongly accelerate the polymerization rate in solution, a new nucleophilicallyassisted ROP methodology was proposed. This operates at ambient temperature in solution even in the presence of chlorosilanes but, unlike the anionic polymerization of ferrocenophanes, does not involve cyclopentadienyl anions. Second, the addition of small quantities of the electrophilic species H(+) and Bu(3)Sn(+) was found to lead to a cationic ROP process. These studies suggest that the "spontaneous" ROP of tin-bridged [1]ferrocenophanes may be a consequence of the presence of spurious, trace quantities of Lewis basic or acidic impurities. The new ROP mechanisms reported are likely to be of general significance for the ROP of other metallocenophanes (e.g., for thermal ROP in the melt) and for other metallacycles containing group 14 elements.

Journal Article↗
PubMed2002

Polynuclear catalysis: enhancement of enchainment cooperativity between different single-site olefin polymerization catalysts by ion pairing with a binuclear cocatalyst.

A new multicenter ethylene polymerization process is described whereby two different single-site catalysts, one competent for producing vinyl-terminated oligomers or macromonomers and one competent for producing high-molecular weight ethylene-alpha-olefin copolymers, are held in close spatial proximity via ion-pairing with a dianionic binuclear bis-borate cocatalyst. Ethylene polymerizations mediated by stoichiometrically appropriate quantities of Me2Si(tBuN)(eta5-3-ethylindenyl)ZrMe2 and Me2Si(tBuN)(eta5-C5Me4)TiMe2 activated by the bis-borate cocatalyst [Ph3C+]2[1,4-(C6F5)3BC6F4B(C6F5)3-2] yield a more homogeneous polyethylene product when compared to control polymerizations using the mononuclear activator [Ph3C+][B(C6F5)4-]. The bulk and spectroscopic properties of the polymer produced using the binuclear activator are consistent with highly branched polyethylene.

Journal Article↗
PubMed2002

Single-site beta-diiminate zinc catalysts for the ring-opening polymerization of beta-butyrolactone and beta-valerolactone to poly(3-hydroxyalkanoates).

Polymerization of beta-butyrolactone (BBL) and beta-valerolactone (BVL) using the zinc alkoxide initiator (BDI-1)ZnO(i)()Pr [(BDI-1) = 2-((2,6-diisopropylphenyl)amido)-4-((2,6-diisopropylphenyl)imino)-2-pentene] proceeds very rapidly under mild conditions to produce poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxyvalerate) (PHV), respectively. For the monomer-to-initiator ratio 200:1, PHB number-average molecular weights (M(n)) are proportional to conversion throughout the reaction and polydispersity indices (PDIs) are narrow, consistent with a living polymerization. Higher monomer-to-initiator ratios can be used to achieve high molecular weight PHB (M(n) > 100 000). End-group analysis verifies that the polymerization of BBL follows a coordination-insertion mechanism, where complexes of the form (BDI-1)ZnOCH(Me)CH(2)CO(2)R are the active species. Variable temperature NMR experiments show that (BDI-1)ZnO(i)()Pr is monomeric in benzene-d(6) solution. In contrast, (BDI-2)ZnO(i)()Pr [(BDI-2) = 2-((2,6-diethylphenyl)amido)-4-((2,6-diethylphenyl)imino)-2-pentene] is a poor initiator at room temperature because it prefers to form a bis-mu-isopropoxide dimer in solution. According to kinetic studies, propagation by (BDI-1)ZnO(i)()Pr is first order in both monomer as well as (BDI-1)ZnO(i)()Pr concentration. These results lead us to propose a monometallic active species. Several results suggest that elimination side reactions are slowly catalyzed by zinc alkoxides, leading to degradation of the polymer.

4-Butyrolactone↗
PubMed2002

Control of polymer topology through transition-metal catalysis: synthesis of hyperbranched polymers by cobalt-mediated free radical polymerization.

A novel approach was demonstrated for the synthesis of hyperbranched polymers by direct free radical polymerization of divinyl monomers controlled by a cobalt chain transfer catalyst (1). By controlling the competition between propagation and chain transfer with 1, the free radical polymerization of ethylene glycol dimethacrylate (3) afforded soluble hyperbranched polymers in one pot. The structure of the hyperbranched polymers was confirmed by (1)H and (13)C NMR. The molecular weight and intrinsic viscosity of the hyperbranched polymers were measured by matrix-assisted laser desorption ionization (MALDI) mass spectrometry and size exclusion chromatography (SEC) equipped with triple detectors. The intrinsic viscosities of the hyperbranched polymers are much lower than those of their linear analogues and do not show molecular weight dependence. The unique structure and properties of these hyperbranched polymers combined with the commercial availability of many divinyl monomers and the robustness of free radical polymerization make this new approach attractive for the preparation of new functional materials.

Journal Article↗
PubMed2003

Functional nanocomposites prepared by self-assembly and polymerization of diacetylene surfactants and silicic acid.

Conjugated polymer/silica nanocomposites with hexagonal, cubic, or lamellar mesoscopic order were synthesized by self-assembly using polymerizable amphiphilic diacetylene molecules as both structure-directing agents and monomers. The self-assembly procedure is rapid and incorporates the organic monomers uniformly within a highly ordered, inorganic environment. By tailoring the size of the oligo(ethylene glycol) headgroup of the diacetylene-containing surfactant, we varied the resulting self-assembled mesophases of the composite material. The nanostructured inorganic host altered the diacetylene polymerization behavior, and the resulting nanocomposites show unique thermo-, mechano-, and solvatochromic properties. Polymerization of the incorporated surfactants resulted in polydiacetylene (PDA)/silica nanocomposites that were optically transparent and mechanically robust. Molecular modeling and quantum calculations and (13)C spin-lattice relaxation times (T(1)) of the PDA/silica nanocomposites indicated that the surfactant monomers can be uniformly organized into precise spatial arrangements prior to polymerization. Nanoindentation and gas transport experiments showed that these nanocomposite films have increased hardness and reduced permeability as compared to pure PDA. Our work demonstrates polymerizable surfactant/silica self-assembly to be an efficient, general approach to the formation of nanostructured conjugated polymers. The nanostructured inorganic framework serves to protect, stabilize, and orient the polymer, mediate its performance, and provide sufficient mechanical and chemical stability to enable integration of conjugated polymers into devices and microsystems.

Acetylene↗
PubMed2002

The topochemical 1,6-polymerization of a triene.

The first topochemical 1,6-polymerization of a triene has been observed. The required supramolecular structure for this polymerization was achieved by the pi-pi stacking of the isonicotinate functionality. The crystal environment of this polymerization reaction controlled both the molecular and supramolecular structure of the polymer and allowed its structure to be determined by single-crystal X-ray diffraction.

Journal Article↗
PubMed2002

Atom transfer radical polymerization synthesis and magnetic characterization of MnFe2O4/polystyrene core/shell nanoparticles.

An atom transfer radical polymerization route is developed for the coating of MnFe2O4 nanoparticles with polystyrene yielding the core-shell nanoparticles with size <15 nm. Magnetic studies show a decrease in coercivity after the formation of polystyrene shell, which is considered due to the reduction of magnetic surface anisotropy upon polymer coating. The MnFe2O4 nanoparticles as the magnetic core were separately prepared by a reverse micelle microemulsion method. Polymerization initiators are chemically attached onto the surface of nanoparticles. The modified nanoparticles are then used as macro-initiators in the subsequent polymerization reaction. This approach provides great flexibility in the selection of magnetic core. Consequently, magnetic tunability is able to be introduced into these core/shell nanoparticulate systems to achieve the desired superparamagnetic response.

Anisotropy↗
PubMed2003

A versatile method for tuning the chemistry and size of nanoscopic features by living free radical polymerization.

A novel approach is presented for manipulating the size and chemistry of nanoscopic features using a combination of contact molding and living free radical polymerization. In this approach a highly cross-linked photopolymer, based on a methacrylate/acrylate mixture, was patterned into submicrometer-sized features on a silicon wafer using a contact-molding technique. A critical component of the monomer mixture was the incorporation of an initiator containing monomer into the network structure, which provides sites for functional group amplification. Features ranging in size from 5 microm to <60 nm were accurately replicated by this process and living free radical polymerizations, both atom transfer radical and nitroxide-mediated polymerization (NMP), could be conducted from these initiating sites to yield polymer brushes which represent a grafted layer of linear chains attached to the original network polymer. Grafts consisting of polystyrene, poly(methyl methacrylate), and poly(2-hydroxyethyl)methacrylate were grown with controlled thicknesses ranging from 10 to 143 nm and graft molecular weights of between 18 000 to 290 000 amu. As a result of this secondary graft process, feature sizes could be tuned from the original 100 nm down to 20 nm, and the surface chemistry varied from hydrophilic to hydrophobic starting from the same initial master pattern. The thin films and patterned features were characterized by contact angle, ellipsometry, optical, and atomic force microscopies.

Journal Article↗
PubMed2003

Degenerative transfer living Ziegler-Natta polymerization: application to the synthesis of monomodal stereoblock polyolefins of narrow polydispersity and tunable block length.

The neutral dimethyl pentamethylcyclopentadienylzirconium acetamidinate, (eta(5)-C(5)Me(5))ZrMe(2)[N(t-Bu)C(Me)N(Et)], can serve as a highly active initiator for the living Ziegler-Natta polymerization of alpha-olefins to produce polyolefins of narrow polydispersity (D < or = 1.05) when "activated" through mono demethylation by a substoichiometric amount of the borate, [PhNMe(2)H][B(C(6)F(5))(4)]. The mechanism by which this living polymerization proceeds is through a process of degenerative transfer involving rapid and reversible methyl group exchange between cationic (active) zirconium propagating centers and neutral (dormant) methyl, polymeryl zirconium end groups. Facile metal-centered epimerization of the dormant species is responsible for a loss of stereocontrol during propagation that produces iso-rich material in contrast to the pure isotactic polymer microstructure obtained when degenerative transfer is not present. By turning degenerative transfer "on" and "off" between successive monomer polymerizations, a successful strategy for the production of monomodal stereoblock polyolefins of narrow polydispersity and tunable block length has been demonstrated.

Journal Article↗
PubMed2003

Submicron polyethylene particles from catalytic emulsion polymerization.

Particles of linear polyethylene (M(n) = (2-3) x 10(3) g x mol(-)(1); M(w)/M(n) = 2-4) obtained by catalytic emulsion polymerization of ethylene possess a nonspherical, lentil-like shape with an average aspect ratio of ca. 10 and diameters from 30 to >300 nm, as determined by TEM and AFM. The particle structure results from a stacking of the lamellae along the one shorter axis of the lentils (i.e., their height, by contrast to the diameter). In addition to these multilamellae particles, remarkably, a considerable number of the particles consist of only a single lamella. The thickness of the lamellae (spacing) as determined by TEM is only 9-11 nm, depending on the polymerization temperature during the synthesis of the dispersions. Crystallization in the dispersions during emulsion polymerization differs dramatically from the usual heterogeneous nucleation of bulk polyethylene samples. Each submicron droplet crystallizes individually, independently from the other droplets, resulting in large supercoolings of around 55 degrees C.

Journal Article↗