Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “polymerization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98Linked to original sources
PubMedDate not supplied

Polymethacrylate-based nitric oxide donors with pendant N-diazeniumdiolated alkyldiamine moieties: synthesis, characterization, and preparation of nitric oxide releasing polymeric coatings.

A series of new nitric oxide (NO) releasing copolymers have been prepared by covalently anchoring alkyldiamine side chains onto a polymethacrylate-based polymer backbone, followed by NO addition to form the desired pendant diazeniumdiolate structures. The resulting diazeniumdiolated copolymers were characterized via UV spectroscopy, and their proton-driven decomposition to release NO was also examined by UV and FTIR as well as chemiluminescence. Polymers with up to 22.1 mol % of incorporated amine sites that can be converted to corresponding diazeniumdiolates could be prepared, and such polymers release up to 0.94 micromol/mg of NO. Further, novel NO releasing polymeric coatings were formulated by doping one of the new polymethacrylate-based NO donors within inert polymeric matrixes. Biodegradable poly(lactide-co-glycolide) was employed as a film additive to greatly prolong the NO release of such coatings by continuously generating protons within the organic phase of the polymeric films, thereby driving decomposition of the diazeniumdiolates.

Azo Compounds↗
PubMedDate not supplied

Surface-active and stimuli-responsive polymer--Si(100) hybrids from surface-initiated atom transfer radical polymerization for control of cell adhesion.

A simple two-step method was developed for the covalent immobilization of atom-transfer radical polymerization (ATRP) initiators on the hydrogen-terminated Si(100) (Si-H) surface. Well-defined functional polymer-Si hybrids, consisting of covalently tethered brushes of poly(ethylene glycol) monomethacrylate (PEGMA) polymer, N-isopropylacrylamide (NIPAAm) polymer, and NIPAAm-PEGMA copolymers and block copolymers on Si-H surfaces, were prepared via surface-initiated ATRP. Kinetics study revealed that the chain growth from the silicon surface was consistent with a "controlled" process. Surface cultures of the cell line 3T3-Swiss albino on the hybrids were evaluated. The PEGMA graft-polymerized silicon [Si-g-P(PEGMA)] surface is very effective in preventing cell attachment and growth. At 37 degrees C [above the lower critical solution temperature (LCST, approximately 32 degrees C) of NIPAAm], the seeded cells adhered, spread, and proliferated on the NIPAAm graft polymerized silicon [Si-g-P(NIPAAm)] surface. Below the LCST, the cells detached from the Si-g-P(NIPAAm) surface spontaneously. Incorporation of PEGMA units into the NIPAAm chains of the Si-g-P(NIPAAm) surface via copolymerization resulted in more rapid cell detachment during the temperature transition. The "active" chain ends on the Si-g-P(PEGMA) and Si-g-P(NIPAAm) hybrids were also used as the macroinitiators for the synthesis of diblock copolymer brushes. Thus, not only are the hybrids potentially useful as stimuli-responsive adhesion modifiers for cells in silicon-based biomedical microdevices but also the active chain ends on the hybrid surfaces offer opportunities for further surface functionalization and molecular design.

3T3 Cells↗
PubMedDate not supplied

Facile, controlled, room-temperature RAFT polymerization of N-isopropylacrylamide.

Poly(N-isopropyl acrylamide) is a thermoresponsive polymer that has been widely investigated for drug delivery. Herein, we report conditions facilitating the controlled, room-temperature RAFT polymerization of N-isopropylacrylamide (NIPAM). The key to success is the appropriate choice of both a suitable RAFT chain transfer agent (CTA) and initiating species. We show that the use of 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid, a trithiocarbonate RAFT CTA, in conjunction with the room-temperature azo initiator 2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile), in DMF, at 25 degrees C, yields conditions leading to NIPAM homopolymerizations which bear all of the characteristics of a controlled/"living" polymerization. We also demonstrate facile size exclusion chromatographic analysis of PNIPAM samples in DMF at 60 degrees C, directly on aliquots withdrawn during the polymerizations, which avoids the problems previously reported in the literature.

Acrylamides↗
PubMed2006

Synthesis of various glycopolymer architectures via RAFT polymerization: from block copolymers to stars.

Well-defined linear poly(acryloyl glucosamine) (PAGA) exhibiting molar masses ranging from 3 to 120 K and low polydispersities have been prepared via reversible addition-fragmentation chain transfer polymerization (RAFT) in aqueous solution without recourse to protecting group chemistry. The livingness of the process was further demonstrated by successfully chain-extending one of these polymers with N-isopropylacrylamide affording narrow dispersed thermosensitive diblocks. This strategy of polymerization was finally extended to the preparation of glycopolymer stars from Z designed non-water-soluble trifunctional RAFT agent. After the growth of very short blocks of poly(hydroxyethyl acrylate) ((-)DP(n)(branch) = 10), AGA was polymerized in aqueous solution in a controlled manner affording well-defined 3-arm glycopolymer stars.

Acrylamides↗
PubMed2006

Enzymatic polymerization of coniferyl alcohol in the presence of cyclodextrins.

The dehydrogenative polymerization of coniferyl alcohol by horseradish peroxidase was performed in 0.10 M phosphate buffer at 27 degrees C. Dehydrogenative polymer (DHP) from coniferyl alcohol was characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. The ratio of 8-O-4':8-5':8-8' linkages was determined by the 1H NMR spectrum of DHP acetate which had good solubility. In "end-wise like" polymerization (the slow addition of hydrogen peroxide), addition of alpha-cyclodextrin to the medium led to DHP with increased 8-O-4' content and a decrease in 8-5' linkages. Under higher pH conditions, DHP with higher 8-O-4' and 8-5' content was obtained in the presence of alpha-cyclodextrin. In the end-wise polymerization (the slow additions of coniferyl alcohol and hydrogen peroxide), using alpha-cyclodextrin also gave DHP with a 8-O-4' richer structure than that prepared in no additive system. The analysis of thioacidolysis products from DHP supported the results of the alpha-cyclodextrin effects on the 8-O-4'-rich structure of DHP. The 8-O-4' structure in DHP prepared in the presence of alpha-cyclodextrin had racemic form as shown by ozonation.

Animals↗
PubMed2006

Design of mucoadhesive polymeric films based on blends of poly(acrylic acid) and (hydroxypropyl)cellulose.

Mixing of aqueous solutions of poly(acrylic acid) and (hydroxypropyl)cellulose results in formation of hydrogen-bonded interpolymer complexes, which precipitate and do not allow preparation of homogeneous polymeric films by casting. In the present work the effect of pH on the complexation between poly(acrylic acid) and (hydroxypropyl)cellulose in solutions and miscibility of these polymers in solid state has been studied. The pH-induced complexation-miscibility-immiscibility transitions in the polymer mixtures have been observed. The optimal conditions for preparation of homogeneous polymeric films based on blends of these polymers have been found, and the possibility of radiation cross-linking of these materials has been demonstrated. Although the gamma-radiation treatment of solid polymeric blends was found to be inefficient, successful cross-linking was achieved by addition of N,N'-methylenebis(acrylamide). The mucoadhesive potential of both soluble and cross-linked films toward porcine buccal mucosa is evaluated. Soluble films adhered to mucosal tissues undergo dissolution within 30-110 min depending on the polymer ratio in the blend. Cross-linked films are retained on the mucosal surface for 10-40 min and then detach.

Acrylic Resins↗
PubMed2006

Biotinylated glycopolymers synthesized by atom transfer radical polymerization.

Biotinylated glycopolymers that bind to the protein streptavidin were synthesized by atom transfer radical polymerization (ATRP). Poly(methacrylate)s with pendent N-acetyl-d-glucosamines were prepared by polymerizing the protected monomer, followed by deprotection. Alternatively, the unprotected monomer was directly polymerized. Both paths provided well-defined glycopolymers with narrow molecular weight distributions (PDI = 1.07-1.23). The number-average molecular weights determined by gel permeation chromatography increased with increasing initial monomer-to-initiator ratios. The polymers were synthesized using a biotin-functionalized initiator for ATRP. Confirmation of the end group and binding to the protein streptavidin was achieved by (1)H NMR and surface plamon resonance.

Acetylglucosamine↗
PubMed2006

Porous scaffolds from high molecular weight polyesters synthesized via enzyme-catalyzed ring-opening polymerization.

Several aliphatic polyesters have been synthesized until now using enzyme-catalyzed ring-opening polymerization (ROP) of different lactones, although their molecular weight, hence mechanical strength, was not sufficient enough to fabricate porous scaffolds from them. To achieve this target, 1,5-dioxepan-2-one (DXO) and epsilon-caprolactone (CL) were polymerized in bulk with Lipase CA as catalyst at 60 degrees C, and porous scaffolds were prepared from the polymers obtained thereof using a salt leaching technique. The CL/DXO molar feed ratio was varied from 1.5 to 10, and the reactivity ratios of CL and DXO were determined using the Kelen-Tudos method under such conditions of polymerization. NMR results showed a slightly lower CL/DXO molar ratio in the copolymers than in the feed due to high reactivity of DXO toward Lipase CA catalysis. The crystallinity of the PCL segment of the copolymers was affected by the presence of soft and amorphous DXO domains. The copolymers having high CL content were thermally more stable. The porosity of the scaffolds was in the range 82-88%, and the SEM analysis showed interconnected pores in the scaffolds. Of the two parameters which could affect the mechanical properties, viz., the copolymer composition and the scaffold pore size, the pore size showed a significant effect on the mechanical properties of the scaffolds. The porous scaffolds developed in this way for tissue engineering are free from toxic organometallic catalyst residues, and they are highly suitable for biomedical applications.

Biocompatible Materials↗
PubMed2006

Enzymatic cross-linking versus radical polymerization in the preparation of gelatin PolyHIPEs and their performance as scaffolds in the culture of hepatocytes.

Highly open porous biodegradable scaffolds, based on gelatin A3, were fabricated with the aim of using them for tissue-engineering applications. The fabrication process is based on an emulsion-templating technique. In the preparation of gelatin scaffolds two different cross-linking procedures were adopted: (I) radical polymerization of the methacrylate functionalities, previously introduced onto the gelatin chains and (II) formation of isopeptide bridges among the gelatin chains promoted by the enzyme microbial transglutaminase. The method of cross-linking exerts a pronounced effect on the morphology of the porous biomaterials: radical polymerization of methacrylated gelatin allowed the production of scaffolds with a better defined porous structure, while the enzymatically cross-linked scaffolds were characterized by a thinner skeletal framework. A suitable sample of each kind of the differently cross-linked porous biomaterials was tested for the culture of hepatocytes. The scaffold obtained by radical polymerization possessed a morphology characterized by relatively large voids and interconnects, and as a consequence, it was more suitable for hepatocytes colonization. On the other hand, the enzymatically cross-linked scaffold resulted in less cytotoxicity and the cultured hepatocytes expressed a better differentiated phenotype, as evidenced by a greater expression and more correct localization of key adhesion proteins.

Animals↗
PubMed2000

Formation and structure of artificial cellulose spherulites via enzymatic polymerization.

The in-depth structural analysis of spherulites of artificial cellulose, formed by the enzymatic polymerization of cellobiosyl fluoride, is reported. Both positive- and negative-type spherulites were observed by polarization optical microscopy. Scanning electron microscopy revealed that the negative spherulites have a three-dimensional round shape, where platelike single crystals of the artificial cellulose originate radially from the center. Transmission electron microscopy confirmed that the cellulose chains orient vertically in the platelike crystals, explaining the observation of negative-type spherulites by polarization optical microscopy. Cellulose spherulites can be formed easily via the enzymatic polymerization process, and the occurrence of both positive- and negative-type spherulites is proposed, due to two independent polymerization mechanisms.

Carbohydrate Sequence↗
PubMedDate not supplied

Polymerization of guaiacol and a phenolic beta-O-4-substructure by Trametes hirsuta laccase in the presence of ABTS.

The reaction of the monomeric lignin model compound guaiacol and the beta-O-4-type dimer erol (1-(4-hydroxy-3-methoxyphenyl)-2(2-methoxyphenoxy)-propane-1,3-diol with laccase from Trametes hirsuta was studied in the presence of the mediator ABTS (2,2'-azino-di[3ethylbenzothiazoline-6-sulfonic acid]). The product mixtures were analyzed by means of aqueous-phase size exclusion chromatography (SEC) with 50 mM NaOH as eluent. Interestingly, in the laccase-catalyzed reaction with both substrates, the mediator not only functioned as an electron carrier but underwent coupling reactions with the substrate to give polymeric coupling products. The molecular weight of these copolymeric products was significantly higher than the molecular weight of products obtained without ABTS. After ultrafiltration, 33% and 21% of the initially applied ABTS could be found in the polymeric product fraction for the substrates guaiacol and erol, respectively, on the basis of nitrogen analysis. When ABTS was added to substrates after full laccase-catalyzed polymerization, the reaction proceeded toward higher molecular weights.

Basidiomycota↗
PubMedDate not supplied

Effect of Cl- and H+ on the oxygen binding properties of glutaraldehyde-polymerized bovine hemoglobin-based blood substitutes.

Bovine hemoglobin was cross-linked with glutaraldehyde, resulting in high oxygen affinity polymeric hemoglobin dispersions of varying molecular weight distributions. High oxygen affinity acellular oxygen carriers were designed in order to exhibit oxygen release profiles closer to that of human red blood cells (RBCs), without exhibiting the inherent increased vasoactivity that occurs with low oxygen affinity acellular oxygen carriers (1, 2). Oxygen dissociation curves were measured for polymerized hemoglobin dispersions at various pH values (7.0, 7.4, and 8.0) and chloride ion concentrations. Unmodified hemoglobin showed an increase in oxygen affinity with increased chloride ion concentration and a decrease in oxygen affinity with increased pH, as was previously demonstrated in the literature (3). For glutaraldehyde-polymerized hemoglobin dispersions, the ability of the oxygen affinity to respond to changes in Bohr H+ and Cl- concentration was weakened. However, at acidic physiological pH (pH = 7), the Bohr effect was still present at high Cl- concentrations. Thus, the Bohr effect maintained some dependency on the Cl- concentration.

Animals↗
PubMed2000

Rasta silanes: new silyl resins with novel macromolecular architecture via living free radical polymerization

Heating TEMPO-methyl resin with dialkylsilane styrenes affords larger resin beads via living free radical polymerization. The new silyl resins prepared by this solvent-free suspension polymerization protocol have been coined "Rasta silanes". Rasta silanes have a novel macromolecular architecture typified by long straight chain polymers bearing the silanes which emanate from the phenyl rings of a cross-linked polystyrene core. By careful selection of comonomers during the polymerization step, loading capacity, silane spacing, and the relative distance of the silane moieties from the resin core can be controlled. The consistently high-loading Rasta silane resins produced can be easily converted into either a reactive silyl chloride or triflate to subsequently anchor alcohols and phenols to the solid phase. Cleavage from the resin can be mediated by treatment with HF.pyridine, TFA solutions, or TBAF.

Journal Article↗
PubMedDate not supplied

Simultaneous in-situ monitoring of parallel polymerization reactions using light scattering; a new tool for high-throughput screening.

A recently introduced technique, simultaneous multiple sample light scattering (SMSLS), was used to monitor parallel polymerization reactions in situ. SMSLS is designed for real-time, high-throughput screening and provides a time-dependent light scattering signature for each reaction, which contains both qualitative and semiquantitative information. Qualitatively, the signature immediately indicates whether the reaction occurs or not, whether there is an initial lag period, and how long the reaction takes until it stops. The signature also provides estimates of the reaction rate and weight average molecular mass M(w), and its shape can help identify mechanistic aspects, for example, controlled versus free radical polymerization, presence of impurities, etc. The method is inherently adapted to small sample volumes and requires no special sample preparation or postpolymerization characterization. The demonstration here involved the free radical polymerization of acrylamide under varying conditions and should be readily applicable to a wide variety of other reactions. Results were cross-checked with multi-detector gel permeation chromatography.

Journal Article↗
PubMed2003

Acrylate intercalation and in situ polymerization in iron-, cobalt-, or manganese-substituted nickel hydroxides.

A chimie douce route based on successive redox and exchange reactions has allowed us to prepare new hybrid organic-inorganic materials, composed of polyacrylate macromolecules intercalated into layered double hydroxides (LDHs), deriving from Ni(OH)(2). Monomer intercalation and in situ polymerization mechanisms have appeared to be strongly dependent upon the nature of the substituting cation in the slabs. In the case of iron-based LDHs, a phase containing acrylate monomeric intercalates has been isolated and identified by X-ray diffraction and infrared spectroscopy. Second, interslab free-radical polymerization of acrylate anions has been successfully initiated using potassium persulfate. In cobalt- or manganese-based LDHs, one-step polymerization has been observed, leading directly to a material containing polyacrylate intercalate.

Journal Article↗
PubMed2003

Self-assembly of dialkyltin(IV) moieties and aromatic dicarboxylates to complexes with a polymeric or a discrete trinuclear macrocyclic structure in the solid state and a mixture of fast interchanging cyclooligomeric structures in solution.

It is well-known that the structures of trialkyltin(IV) carboxylates can be either monomeric, polymeric, or cyclooligomeric in the solid state. In contrast, all dialkyltin(IV) dicarboxylates characterized so far in the solid state have monomeric or polymeric structures, however, for some cases it has been proposed that their solution-state structure is cyclooligomeric. In order to generate more information on this subject, dimethyl- and di-n-butyltin(IV) complexes with phthalic and isophthalic acid have been prepared and analyzed both in solution and in the solid state. The solid-state structures of the two dialkyltin(IV) phthalates examined herein contain polymeric molecular chains, however, with supramolecular Sn.O' interactions, which result in the generation of cyclooligomeric units. This provides evidence for the presence of discrete cyclooligomeric structures in solution, which are involved in fast dynamic exchange equilibria as evidenced by (1)H, (13)C, and (119)Sn NMR spectroscopy. In the case of the two dialkyltin(IV) isophthalate complexes studied herein (R = Me, n-Bu), only the di-n-butyltin derivative is soluble and NMR spectroscopy as well as FAB(+) spectrometry indicates the formation of cyclic dinuclear, trinuclear, and/or tetranuclear species in solution, which may be involved also in fast dynamic exchange equilibria. In the solid state, however, discrete cyclotrinuclear units can be identified, in which the 24-membered macrocyclic cavity is almost completely planar, having six oxygen atoms directed into its interior and six Sn-n-butyl groups approximately perpendicular to the molecular plane. The diameter of the cyclic cavity can be described by the transannular O.O distances that vary from 7.68 to 7.84 A, being large enough for the introduction of linear alkyl groups. This can be demonstrated by the supramolecular structure of this compound, which contains a new type of bis[2]pseudorotaxane formed between two molecules through mutual threading via two of the Sn-butyl groups. Such a supramolecular entity has been unknown so far, since the usual composition of bis[2]pseudorotaxanes is the trimolecular combination of a macrocyclic ring system with two threads.

Journal Article↗
PubMed2005

Comparative study of the coordination chemistry and lactide polymerization of alkoxide and amide complexes of zinc and magnesium with a beta-diiminato ligand bearing ether substituents.

A series of beta-diiminato complexes of the form (BDI-3)MX where (BDI-3) = [CH(CMeNC(6)H(4)-2-OMe)(2)]; M = Zn, Mg; X = O(i)()Pr, O(t)()Bu, or N(SiMe(3))(2) has been synthesized. The (BDI-3) ligand is bidentate in (BDI-3)ZnN(SiMe(3))(2) and tetradentate in (BDI-3)MgN(SiMe(3))(2). The alkoxide complexes are shown to be active for lactide polymerization. Polymerization of rac-lactide with (BDI-3)ZnO(i)Pr gives a moderate preference for heterotactic PLA. Polymerization of rac-lactide with [(BDI-3)MgO(t)Bu](2) shows a slight preference for heterotactic PLA in CH(2)Cl(2) but is highly stereoselective in THF in the production of heterotactic PLA.

Journal Article↗
PubMed2005

Lanthanide borohydride complexes supported by diaminobis(phenoxide) ligands for the polymerization of epsilon-caprolactone and L- and rac-lactide.

Reaction of Na2O2NN' [H2O2NN' = (2-C5H4N)CH2N[2-HO-3,5-C6H2(t)Bu2]2] with M(BH4)3(THF)3 afforded the dimeric, rare-earth borohydride compounds [M(O2NN')(mu-BH4)(THF)n]2 [M = Y(III), n = 0.5 (1-Y); M = NdIII, n = 1 (1-Nd); M = SmIII, n = 0 (1-Sm)]. For comparison the chloride analogues [M(O2NN')(mu-Cl)(THF)n]2 (2-M; M = La(III) or Sm(III), n = 0; M = Nd(III), n = 1) and the corresponding pyridine adducts [M(O2NN')(mu-X)(py)]2 [X = BH4 (3-M) or Cl (4-M); M = La(III), Nd(III), or Sm(III)] were prepared and structurally characterized for 4-La. Compounds 1-M initiated the ring-opening polymerization of epsilon-caprolactone. The best molecular weight control (suppression of chain transfer) for all three monomers was found for the samarium system 1-Sm. The most effective heterotactic enrichment (Pr) in the polymerization of rac-lactide was found for 1-Y (P(r) = 87%). Compound 1-Nd catalyzed the block copolymerization of epsilon-caprolactone and L- and rac-lactide provided that epsilon-caprolactone was added first. Attempted block polymerization by the addition of L-lactide first, or random copolymerization of a ca. 1:1 mixture of epsilon-caprolactone and L-lactide, gave only a poly(L-lactide) homopolymer.

Borohydrides↗