Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Friction”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97Linked to original sources
PubMed2002

Normal and lateral forces between lipid covered solids in solution: correlation with layer packing and structure.

We report on the normal and lateral forces between controlled-density mono- and bilayers of phospholipid co-adsorbed onto hydrophobic and hydrophilic solid supports, respectively. Interactions between 1,2-dioleoyl-sn-glycero-3-phosphocholine layers were measured using an atomic force microscope. Notable features of the normal force curves (barrier heights and widths) were found to correlate with the thickness and density of the supported lipid layers. The friction and normal force curves were also found interrelated. Thus, very low friction values were measured as long as the supported layer(s) resisted the normal pressure of the tip. However, as the applied load exceeded the critical value needed for puncturing the layers, the friction jumped to values close to those recorded between bare surfaces. The lipid layers were self-healing between measurements, but a significant hysteresis was observed in the force curves measured on approach and retraction, respectively. The study shows the potential of using atomic force microscopy for lipid layer characterization both with respect to structure and interactions. It further shows the strong lubricating effect of adsorbed lipid layers and how this varies with surface density of lipids. The findings may have important implications for the issue of joint lubrication.

Adsorption↗
PubMed1991

A physical model of ATP-induced actin-myosin movement in vitro.

The nature of the mechanism limiting the velocity of ATP-induced unidirectional movements of actin-myosin filaments in vitro is considered. In the sliding process two types of "cyclic" interactions between myosin heads and actin are involved, i.e., productive and nonproductive. In the productive interaction, myosin heads split ATP and generate a force which produces sliding between actin and myosin. In the nonproductive interaction "cycle," on the other hand, myosin heads rapidly attach to and detach from actin "reversibly," i.e., without splitting ATP or generating an active force. Such a nonproductive interaction "cycle" causes irreversible dissipation of sliding energy into heat, because the myosin cross-bridges during this interaction are passive elastic structures. This consideration has led us to postulate that such cross-bridges, in effect, exert viscous-like frictional drag on moving elements. Energetic considerations suggest that this frictional drag is much greater than the hydrodynamic viscous drag. We present a model in which the sliding velocity is limited by the balance between the force generated by myosin cross-bridges in the productive interaction and the frictional drag exerted by other myosin cross-bridges in the nonproductive interaction. The model is consistent with experimental findings of in vitro sliding, including the dependence of velocity on ATP concentration, as well as the sliding velocity of co-polymers of skeletal muscle myosin and phosphorylated and unphosphorylated smooth muscle myosins.

Actins↗
PubMed1996

Fluctuation in the microtubule sliding movement driven by kinesin in vitro.

We studied the fluctuation in the translational sliding movement of microtubules driven by kinesin in a motility assay in vitro. By calculating the mean-square displacement deviation from the average as a function of time, we obtained motional diffusion coefficients for microtubules and analyzed the dependence of the coefficients on microtubule length. Our analyses suggest that 1) the motional diffusion coefficient consists of the sum of two terms, one that is proportional to the inverse of the microtubule length (as the longitudinal diffusion coefficient of a filament in Brownian movement is) and another that is independent of the length, and 2) the length-dependent term decreases with increasing kinesin concentration. This latter term almost vanishes within the length range we studied at high kinesin concentrations. From the length-dependence relationship, we evaluated the friction coefficient for sliding microtubules. This value is much larger than the solvent friction and thus consistent with protein friction. The length independence of the motional diffusion coefficient observed at sufficiently high kinesin concentrations indicates the presence of correlation in the sliding movement fluctuation. This places significant constraint on the possible mechanisms of the sliding movement generation by kinesin motors in vitro.

Animals↗
PubMed2000

Tactile directional sensibility: peripheral neural mechanisms in man.

Tactile directional sensibility, i.e. the ability to tell the direction of an object's motion across the skin, is an easily observed sensory function that is highly sensitive to disturbances of the somatosensory system. Based on previous psychophysical experiments on healthy subjects it was concluded that directional sensibility depends on two kinds of information from cutaneous mechanoreceptors; spatio-temporal information and information about friction-induced changes in skin stretch. In the present study responses to similar probe movements as in the psychophysical experiments were recorded from human single mechanoreceptors in the forearm skin. All slowly adapting type 2 (SA2) units were spontaneously active, and with increasing force of friction their discharge rates were modified by probe movements at increasing distances from the Ruffini end-organ, reflecting the high stretch-sensitivity of these units. Slowly adapting type 1 (SA1) and field units responded to the moving probe within well-defined skin areas directly overlying the individual receptor terminals, and compared to the SA2 units their response properties were less dependent on the force of friction. The results suggest that SA1 and field units have the capacity to signal spatio-temporal information, whereas a population of SA2 units have the capacity to signal direction-specific information about changes in lateral skin stretch.

Adult↗
PubMed2000

Large-sliding contact elements accurately predict levels of bone-implant micromotion relevant to osseointegration.

Primary stability is recognised as an important determinant in the aseptic loosening failure process of cementless implants. An accurate evaluation of the bone-implant relative micromotion is becoming important both in pre-clinical and clinical studies. If the biological threshold for micro-movements is in the range 100-200 micrometer then, in order to be discriminative, any method used to evaluate the primary stability should have an accuracy of 10-20 micrometer or better. Additionally, such method should also be able to report the relative micromotion at each point of the interface. None of the available experimental methods satisfies both requirements. Aim of the present study is to verify if any of the current finite element modelling techniques is sufficiently accurate in predicting the primary stability of a cementless prosthesis to be used to decide whether the micromotion may or may not jeopardise the implant osseointegration. The primary stability of an anatomic cementless stem, as measured in vitro, was used as a benchmark problem to comparatively evaluate different contact modelling techniques. Frictionless contact, frictional contact and press-fitted frictional contact conditions were modelled using alternatively node-to-node, node-to-face and face-to-face contact elements. The model based on face-to-face contact elements accounting for frictional contact and initial press-fit was able to predict the micromotion measured experimentally with an average (RMS) error of 10 micrometer and a peak error of 14 micrometer. All the other models presented errors higher than 20 micrometer assumed in the present study as an accuracy threshold.

Bone and Bones↗
PubMed2001

Estimating the employment and earnings costs of mental illness: recent developments in the United States.

Substantial attention has recently been focused on both the prevalence and consequences of mental illness. Generally, public interest in the costs of mental illness has been limited to the direct costs of treating the mentally ill. In this paper, we consider the magnitude and importance of a major component of the indirect costs of mental illness: employment and earnings losses. We first describe the technical difficulties involved in estimating these costs. We then describe new data and recent advances in the United States that have improved our ability to make such estimates. Our conclusions from the recent research are that each year in the United States 5-6 million workers between the ages of 16 and 54 lose, fail to seek, or cannot find employment as a consequence of mental illness. Among those who do work, we estimate that mental illness decreases annual income by an amount between $3,500 and $6,000. We then discuss an emerging challenge to the traditional method for arriving at such estimates: the friction cost approach. We describe both the conceptual and technical differences between the friction cost method and the traditional human capital approach. We conclude that while economic context has much to do with whether one relies on human capital or friction cost estimates, each can offer useful information about labor market losses due to mental illness.

Adolescent↗
PubMed2002

Orientation and relocation of biphenyl thiol self-assembled monolayers under sliding.

Recent studies have emphasized the use of biphenyl thiol (BPT) monolayers as a resist in electron lithography. In this paper, friction and wear properties of BPT monolayers have been studied by atomic force microscopy. The BPT molecular chains are compliant and experience orientation under normal load, which in turn reduces the friction force. During sliding it is observed that after the first several scans, the friction force of BPT is significantly reduced, but the surface height does not show any apparent change. These observations suggest that the orientation is reversible and can be facilitated by initial sliding. Relocation and accumulation of BPT occurs during the first several scans, which lead to the formation of larger terrace. Based on the wear studies of a single BPT terrace, it is found that the wear lives of self-assembled monolayers increase exponentially with terrace size.

Journal Article↗
PubMed1991

Evaluation of acetabular stability in uncemented prostheses.

The stability of two commonly used uncemented acetabular prostheses fixed with either pegs or screws has been established by evaluating the torque strengths in ten cadaveric acetabulae. The initial stability of implants to simulated frictional loads was satisfactory compared to previous estimations of the frictional torques in polyethylene-on-metal and metal-on-metal articulations. Testing of the torque required to produce 2 degrees of rotation at the bone-implant interface showed that the peg fixation required significantly greater loads than did the screw fixation (P less than .03). Testing the prostheses to failure gave good results, although lower than previous cemented arthroplasty estimations. The margin of stability over the frictional torques that can be generated is such that it may affect the bony ingrowth into these prostheses. This may account for the common finding of fibrous ingrowth in these prostheses.

Acetabulum↗
PubMed1996

Wear of the polyethylene liner-metallic shell interface in modular acetabular components. An in vitro analysis.

The purpose of this study was to determine the effect of compression cycles and wear patterns on the polyethylene liner-metallic shell interface in modular acetabular components. Articular frictional torque was also measured. Modular acetabular components from five manufacturers were tested. The polyethylene liners were sputter coated with gold on the convex surface to enhance the visualization of wear and deformation patterns. Each component was cycled for 10 million cycles in a hydraulic fatigue testing machine. Frictional torque was measured prior to the start of the cyclic loading and in increments of 2 million cycles. Frictional torque was significantly lower in the design with an enhanced polyethylene liner. Abrasion of the gold from the convex surface of polyethylene liners varied from 2 to 23% between designs. Extrusion of the polyethylene into the screw holes in the metallic shells was universal. Three modes of damage (burnishing, punch-out, and gouging) were identified on the convex surface of the polyethylene liner. Abrasion of the gold from the convex surface of the polyethylene varied greatly between designs. This is indicative of relative motion between the polyethylene liner and the metallic shell. This motion must be minimized to limit the generation of wear debris from the convex surface of the polyethylene. Several aspects of modular acetabular component design could be implemented to potentially reduce wear, including limiting the number of holes available for screw placement, smoothing out the edges of the screw holes to avoid punch-out, and avoiding supplemental fixation of the liner unless it is essential to prevent motion between the liner and the metallic shell.

Analysis of Variance↗
PubMed2005

Economic evaluation of hemodialysis: implications for technology assessment in Greece.

OBJECTIVES: Hemodialysis is a well-established treatment for 74 percent of end-stage renal disease (ESRD) patients in Greece. The purpose of this study is to provide an estimate of the direct cost of dialysis in a public hospital setting and an estimate of the loss of production for ESRD patients. The results will be useful for public health facility planning purposes. METHODS: A socioeconomic prevalence-based analysis was performed using micro-economic evaluation of health-care resources consumed to provide hemodialysis for ESRD patients in 2000. Lost productivity costs due to illness were estimated for the patient and family using the human capital approach and the friction method. Indirect morbidity costs due to absence from work and long-term were estimated, as well as mortality costs. Mean gross income was used for both patient and family. RESULTS: Total health-sector cost for hemodialysis in Greece exceeds 171 million Euros, or 182 Euros per session and 229 Euros per inpatient day. There were 2,046 years lost due to mortality, and the potential productivity cost was estimated at 9.9 million Euros, according to the human capital approach, and 303.000 Euros, according to the friction method. Total morbidity cost due to absence from work and early retirement was estimated at more than 273 million Euros, according to the human capital approach, and 12.5 Euros, according to the friction method. CONCLUSIONS: Providing hemodialysis care for 0.05 percent of the population suffering from ESRD absorbs approximately 2 percent of total health expenditure in Greece. In addition to the cost for the National Health System, production loss due to mortality and morbidity from the disease are also considerable. Promoting alternative technologies such as organ transplantation and home dialysis as well as improving hemodialysis efficiency through satellite units are strategies that may prove more cost-effective and psychologically advantageous for the patients.

Cost of Illness↗
PubMed1988

Modification of DNA dynamics by platinum drug binding: a time-dependent fluorescence depolarization study of the interaction of cis- and trans-diamminedichloroplatinum(II) with DNA.

The interaction of calf thymus DNA with the antitumor drug cis-diamminedichloroplatinum(II), and with the clinically ineffective trans isomer, is studied by time-dependent fluorescence depolarization spectroscopy of intercalated ethidium. The effect of the platinum compounds on the rapid torsional motions of DNA in solution is observed via depolarization of the ethidium fluorescence. The depolarization data are successfully analyzed with an elastic model of DNA dynamics and yield a value for the product of the torsional rigidity of the DNA and the friction factor for DNA twisting. The dependence of this quantity on the degree of platination of the DNA is determined for each isomer. At low levels of platination, the cis isomer increases the solute-solvent friction acting on the DNA torsional motions, which we attribute to local kinking of the helix axis at the sites of platination. At high levels of platination, the cis isomer decreases the torsional rigidity of the DNA, indicating that disruption of DNA duplex structure occurs under these conditions. The binding of the trans isomer to DNA has no effect on the torsional rigidity or the friction. The present results are compared with other findings on the interaction of these platinum compounds with DNA.

Cisplatin↗
PubMed1981

Solution structural studies of chromatin fibers.

We report solution structural studies on 9--16-kilobase (kb) fragments of the 30-nm chromatin fiber isolated from calf thymus nuclei. Samples were stabilized by dimethylsuberimidate cross-linking in 100 mM salt concentration to ensure retention of a compact conformation. Electron microscopy, sedimentation diffusion, light scattering, and gel electrophoresis were used to characterize materials which were fractionated by size by utilizing sucrose gradient sedimentation. Measurements reported include the translational frictional coefficient as determined by quasielastic light scattering and the rotational frictional coefficient as deduced from transient electric dichroism. These frictional properties were combined to yield 33 +/- 3 nm for the diameter of the fiber and a length of 1.5 +/- 0.1 nm per nucleosome. Assuming a superhelix pitch of 11 nm, we calculate 7.5 +/- 0.5 nucleosomes per superhelical turn. The 30-nm fiber was found to reach saturation of electric field orientation at about 10--13 kV/cm and to lack a detectable permanent dipole moment, implying no polarity of the fiber. The limiting reduced dichroism rho was found to be +0.06, intermediate between the values expected if the nucleosomal disk diameters were parallel (rho expected = -3/8) or perpendicular (rho expected +3/4) to the fiber axis. This result implies an average angle of 51 degrees between the fiber axis and the local DNA (nucleosomal) superhelix axis and rules out many of the simple models which have been proposed for the detailed structure of the 30-nm fiber.

Animals↗
PubMed1978

Comparison of DNA polymerase alpha and delta from bone marrow.

DNA polymerases alpha and delta from rabbit bone marrow were purified to specific activities greater than 30 000 nM TMP incorporated (mg of protein)(-1)h(-1). alpha is quantitatively predominant. alpha and delta have the same reaction requirements and are both similarly sensitive to N-ethylmaleimide. The primary functional distinction is the association of 3' to 5' exonuclease activity with delta. Sedimentation coefficients obtained from zone sedimentation in glycerol gradients and Stokes radii values from gel filtration allow the calculation of true molecular weight and frictional ratios. alpha exhibits a bimodal pattern, sedimenting at 6 and 8 S on glycerol gradients and demonstrating components corresponding to 40.5- and 65-A Stokes radii upon gel filtration. The calculated molecular weights of the two forms of alpha are 100 000 and 215 000; the frictional ratios are 1.34 and 1.65. This and other data suggest a possible monomer-dimer relation. In contrast, delta sediments uniformly at 6.5 S and also behaves uniformly upon gel filtration at 4595 A. The molecular weight of delta is distinct at 122 000; its frictional ratio is 1.39. Because of similarities of the DNA polymerizing activities of both forms of alpha and of delta, it is postulated that alpha is derived from delta by structural modification, resulting in a decrease in molecular weight, the tendency to aggregate as dimers, and a concomitant loss of 3' to 5' exonuclease activity.

Animals↗
PubMedDate not supplied

pH-responsive properties of multilayered poly(L-lysine)/hyaluronic acid surfaces.

Multilayer films have been prepared by the sequential electrostatic adsorption of poly(L-lysine) and hyaluronic acid onto charged silicon surfaces from dilute aqueous solutions under various pH conditions. Microelectrophoresis was used to examine the local acid-base equilibria of the polyelectrolytes within the films as a function of the total number of layers in the film and the assembly solution pH. The acid-base dissociation constants were observed to deviate significantly from dilute solution values upon adsorption, to be layer dependent only within the first 3-4 layers, and to show sensitivity to the assembly solution pH. As a result, some of the physicochemical properties of the films have also been found to exhibit pH-responsive behavior. For example, the thickest films result when at least one of the polyelectrolytes is only partially dissociated in solution. As well, the pH-dependent degree of dissociation of the surface functional groups can be used to vary the contact angle of a water droplet by as much as 25 degrees and the coefficient of friction by up to an order of magnitude. In addition, the extent to which PLL/HA films can be made to swell in solution can be varied by a factor of 7 depending on the assembly solution and swelling solution pH. The anomalies found in the dissociation constants account for the trends in these pH-dependent properties. Here, we demonstrate that knowledge of the acid-base dissociation behavior in multilayer films is key to understanding and controlling the physical properties of the films, particularly surface friction and wettability, which are fundamentally important factors for many biomaterials applications. For example, we outline a mechanism whereby biopolymer thin films can be electrostatically adsorbed under highly charged "sticky" conditions and then quickly transformed into stable low-friction films simply by altering the pH environment.

Biocompatible Materials↗
PubMed2003

Molecular dynamics simulation of an electric field driven dipolar molecular rotor attached to a quartz glass surface.

Molecular dynamics simulations of the response of a dipolar azimuthal 3-chloroprop-1-ynyl rotor mounted on the surface of quartz glass to a rotating electric field were performed. The rotor motion was classified as synchronous, asynchronous, random, or hindered, based on the value of the average lag of the rotor behind the field and a comparison of the intrinsic rotational barrier V(b) with kT. A phase diagram of rotor behavior was deduced at 10, 300, and 500 K as a function of field strength and frequency. A simple model for the rotor motion was developed, containing the driving force, the temperature, the height of the torsional barrier, and the friction constant of the rotor. Defining E(bo) to be the electric field strength necessary to get rotational response from the rotor ("breakoff field") and mu to be the rotor dipole moment component in the plane of rotation, we find that E(bo) is frequency independent when 2 microE(bo) is less than either V(b) or kT (the driving force needs to overcome the more important of the two, the intrinsic barrier or random thermal motion). At higher frequencies, E(bo) is a quadratic function of the frequency and the driving force fights friction, which is dictated by intramolecular vibrational redistribution (IVR) from the pumped rotational mode to all others. Fitting the simple model to simulation data, we derived a friction constant of 0.26 ps eV x (nu - 0.5)/THz between 500 and 1000 GHz.

Journal Article↗
PubMed2005

Crystallization in thin liquid films induced by shear.

It is known that the thin-film structure of confined fluids and solids can be changed when the confining surfaces are sheared. Positional and orientational short- or long-range reordering can occur that often have no bulk counterparts. These multilayer, monolayer, or even sub-monolayer effects are important for understanding adhesion and friction processes, but they have proved difficult to measure, partly due to a lack of experimental techniques and partly to their apparent subtle dependence on many experimental parameters. Here we report the use of shear measurements and "optical absorption spectroscopy" in the surface forces apparatus to measure a shear-induced phase transition of an anisotropic (dye) molecule confined between two shearing mica surfaces in aqueous solution. Our studies on the shear-induced ordering and friction forces of highly anisotropic cyanine dye molecules in thin water films show only a weak effect of molecular anisotropy on shear-induced ordering, friction forces, and the onset of shear-induced crystallization, although dramatic changes do occur when the confined molecules ultimately crystallize.

Journal Article↗
PubMed2005

Formation and rheological properties of the supercritical CO2-water pure interface.

From the interfacial tension (gamma) measurement, we have analyzed the interfacial organization that occurs between pure H2O and pure CO2 from a kinetical and rheological point of view. This article is the followup to a previous one, where we showed that this equilibrated interface is composed of small H2O-CO2 cluster blocks [Tewes, F.; Boury, F. J. Phys. Chem. B 2004, 108, 2405]. By analyzing the variation of gamma with the square root of time, we found that the organization of the H2O-CO2 interface is, in the initial times, controlled by the diffusion of the CO2 molecules into the water. We compared the frictional coefficient determined from the measured CO2 diffusion coefficient with the frictional coefficient calculated from the Stokes equation (frictional ratio). From that, we concluded that it is a hydrated form of CO2 that diffuses and that the degree of hydration decreases with pressure. Rheological properties of the equilibrated interface vary with CO2 pressure, in the range of 50-90 bar, from a viscoelastic comportment to a purely elastic behavior, showing a change in the interfacial organization. The high equilibrium part of the elasticity (110 mN/m) obtained at 90 bar suggests a highly structured interface. Two phenomena could explain the interfacial rheological behavior: (i) an increase and a growth of the blocks H2O-CO2 cluster with the CO2 pressure or (ii) an increase in the interfacial capacity to form stable clusters under interfacial area compression.

Carbon Dioxide↗
PubMed2006

Alkylphosphonate modified aluminum oxide surfaces.

The surface properties of aluminum, such as chemical composition, roughness, friction, adhesion, and wear, can play an important role in the performance of micro-/nano-electromechanical systems, e.g., digital micromirror devices. Aluminum substrates chemically reacted with octadecylphosphonic acid (ODP/Al), decylphosphonic acid (DP/Al), and octylphosphonic acid (OP/Al) have been investigated and characterized by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and atomic force microscopy (AFM). XPS analysis confirmed the presence of alkylphosphonate molecules on ODP/Al, DP/Al, and OP/Al. No phosphonates were found on bare Al as a control. The sessile drop static contact angle of pure water on ODP/Al and DP/Al was typically more than 115 degrees and on OP/Al typically less than 105 degrees indicating that all phosphonic acid reacted Al samples were highly hydrophobic. The root-mean-square surface roughness for ODP/Al, DP/Al, OP/Al, and bare Al was less than 15 nm as determined by AFM. The surface energy for ODP/Al and DP/Al was determined to be approximately 21 and 22 mJ/m2, respectively, by the Zisman plot method, compared to 25 mJ/m2 for OP/Al. ODP/Al and OP/Al were studied by friction force microscopy, a derivative of AFM, to better understand their micro-/nano-tribological properties. ODP/Al gave the lowest coefficient of friction values while bare Al gave the highest. The adhesion forces for ODP/Al and OP/Al were comparable.

Journal Article↗