Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Azides”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97Linked to original sources

Voltammetric studies of the catalytic mechanism of the respiratory nitrate reductase from Escherichia coli: how nitrate reduction and inhibition depend on the oxidation state of the active site.

The respiratory molybdoenzyme nitrate reductase (NarGHI) from Escherichia coli has been studied by protein film voltammetry, with the enzyme adsorbed on a rotating disk pyrolytic graphite edge (PGE) electrode. Catalytic voltammograms for nitrate reduction show a complex wave consisting of two components that vary with pH, nitrate concentration, and the presence of inhibitors. At micromolar levels of nitrate, the activity reaches a maximum value at approximately -25 mV and then decreases as the potential becomes more negative. As the nitrate concentration is raised, the activity at more negative potentials increases and eventually becomes the dominant feature at millimolar concentrations. This leads to the hypothesis that nitrate binds more tightly to Mo(V) than Mo(IV), so that low levels of nitrate are more effectively reduced at a higher potential despite the lower driving force. However, an alternative interpretation, that nitrate binding is affected by a change in the redox state of the pterin, cannot be ruled out. This proposal, implicating a specific redox transition at the active site, is supported by experiments carried out using the inhibitors azide and thiocyanate. Azide is the stronger inhibitor of the two, and each inhibitor shows two inhibition constants, one at high potential and one at low potential, both of which are fully competitive with nitrate; closer analysis reveals that the inhibitors act preferentially upon the catalytic activity at high potential. The unusual potential dependence therefore derives from the weaker binding of nitrate or the inhibitors to a more reduced state of the active site. The possible manifestation of these characteristics in vivo has interesting implications for the bioenergetics of E. coli.

Azides↗

Metabolic functionalization of recombinant glycoproteins.

Glycoproteins are essential for cellular communication and are the most rapidly growing class of therapeutic agents. Chemical modification of glycoproteins has been employed to improve their in vivo efficacy or to label them for detection. Methods for the controlled derivatization of glycoproteins are presently limited by the repertoire of natural amino acid side chain and carbohydrate functionalities. Here, we use metabolic oligosaccharide engineering to introduce a bioorthogonal functional group, the azide, into cellular and recombinant glycoproteins for subsequent chemical elaboration via Staudinger ligation. As most therapeutic glycoproteins are sialylated and require this saccharide for optimal pharmacokinetics, we targeted sialic acid as a host for azides using N-azidoacetylmannosamine (ManNAz) as a biosynthetic precursor. Metabolic conversion of ManNAz to N-azidoacetylsialic acid (SiaNAz) within membrane-bound and secreted glycoproteins was quantified in a variety of cell types. SiaNAz was found to comprise between 4% and 41% of total sialosides, depending on the system. Metabolic labeling of recombinant interferon-beta and GlyCAM-Ig was achieved, demonstrating the utility of the method for functionalizing N-linked and O-linked glycoproteins of therapeutic interest. More generally, the generation of recombinant glycoproteins containing chemical handles within their glycans provides a means for studying their behavior and for improving their in vivo efficacy.

Animals↗

Deoxyadenosine-based DNA polymerase photoprobes: design, synthesis, and characterization as inhibitors of the Escherichia coli DNA polymerase I Klenow fragment.

DNA polymerase photoprobes 2-[(4-azidophenacyl)thio]-2'-deoxyadenosine 5'-triphosphate (1), 2-[(4-azidophenylsulfenyl)thio]-2'-deoxyadenosine 5'-triphosphate (2), and 2-[(4-azido-2-nitrophenyl)-thio]-2'-deoxyadenosine 5'-triphosphate (3) were designed from a thermodynamic model of DNA polymerase 1-substrate interactions such that the triphosphate would anchor the inhibitor and allow the phenyl azide to interact with the complementary template binding site. Photoprobes 1-3 were synthesized by condensation of 2-thio-2'-deoxyadenosine or its phosphate with p-azidophenacyl bromide, N-(4-azidophenylsulfenyl)phthalimide, and 4-azido-1-fluoro-2-nitrobenzene, respectively, and characterized as reversible and photoinduced irreversible inhibitors of the DNA polymerase I Klenow fragment and HIV I reverse transcriptase. The aryl azides decomposed with irradiation at 300 and 350 nm with half-lives ranging from 0.98 to 2.33 min and 2.15 to 5.38 min, respectively, with quantum efficiencies ranging from 0.29 to 0.55 and no apparent photodecomposition of the 2-thio-2'-deoxyadenosine nucleotide. Photoprobes 1-3 showed mixed noncompetitive inhibition of the Klenow fragment polymerase activity versus poly(dA).(T)10 as variable substrate with apparent competitive inhibition constants of 2.1, 36, and 29 microM, respectively, evidence suggesting that these photoprobes bind to both the free enzyme form and the enzyme-template-primer binary complex. Of the three photoprobes, only nucleotide 1 photoinactivates the Klenow fragment; in the presence of a 200-fold excess of nitrene scavenger, photoprobe 1 inactivates 92% of the Klenow fragment polymerase activity with saturation observed at 9.7 microM and an IC50 of about 2 microM. This evidence demonstrates that photoprobe 1 does bind to the Klenow fragment in the absence of template-primer and that it is an efficient photoprobe.

Affinity Labels↗

Mechanism of hydrogen cyanide binding to myoglobin.

Cyanide binding to myoglobin is much slower than that of other ferric and ferrous ligands, suggesting rate limitation by bond formation and disruption within the distal pocket. This interpretation is supported by two key experimental observations. First, His64(E7) to Gly and Ala mutations, which open a direct channel from the solvent to the iron atom, and Phe46(CD4) to Leu, Ile, and Val mutations, which increase the mobility of the distal histidine, have little effect on the association rate constant for cyanide binding. In contrast, these mutations cause 100-1000-fold increases in the rate constant for azide binding, showing convincingly that the binding of this ligand is limited by the rate of its movement into the protein. Second, the rate constant for cyanide dissociation is unaffected by changing the size of the residue at position 64(E7) in the series Gly, Val, Leu, Ile, Phe, whereas there is a 2000-fold decrease in the rate of azide dissociation in going from Gly64 to Phe64 metmyoglobin. The major determinants of the cyanide affinity are the ease of water displacement from the ferric iron atom in metmyoglobin, the acid dissociation constant of HCN inside the protein (K*a), and steric hindrance and electrostatic interactions at the sixth coordination position. Direct hydrogen bonding to the distal histidine does not appear to play an important role in stabilizing bound cyanide. Instead, the general polarity of the distal pocket and its effect on K*a are the key factors regulating cyanide affinity under physiological conditions.

Amino Acids↗

Mutagenesis of a proton linkage pathway in Escherichia coli manganese superoxide dismutase.

Mutagenesis of Escherichia coli manganese superoxide dismutase (MnSD) demonstrates involvement of the strictly conserved gateway tyrosine (Y34) in exogenous ligand interactions. Conservative replacement of this residue by phenylalanine (Y34F) affects the pH sensitivity of the active-site metal ion and perturbs ligand binding, stabilizing a temperature-independent six-coordinate azide complex. Mutant complexes characterized by optical and electron paramagnetic resonance (EPR) spectroscopy are distinct from the corresponding wild-type forms and the anion affinities are altered, consistent with modified basicity of the metal ligands. However, dismutase activity is only slightly reduced by mutagenesis, implying that tyrosine-34 is not essential for catalysis and may function indirectly as a proton donor for turnover, coupled to a protonation cycle of the metal ligands. In vivo substitution of Fe for Mn in the MnSD wild-type and mutant proteins leads to increased affinity for azide and altered active-site properties, shifting the pH-dependent transition of the active site from 9.7 (Mn) to 6.4 (Fe) for wt enzyme. This pH-coupled transition shifts once more to a higher effective pKa for Y34F Fe2-MnSD, allowing the mutant to be catalytically active well into the physiological pH range and decreasing the metal selectivity of the enzyme. Peroxide sensitivities of the Fe complexes are distinct for the wild-type and mutant proteins, indicating a role for Y34 in peroxide interactions. These results provide evidence for a conserved peroxide-protonation linkage pathway in superoxide dismutases, analogous to the proton relay chains of peroxidases, and suggests that the selectivity of Mn and Fe superoxide dismutases is determined by proton coupling with metal ligands.

Azides↗

The alpha 3(beta Y341W)3 gamma subcomplex of the F1-ATPase from the thermophilic Bacillus PS3 fails to dissociate ADP when MgATP is hydrolyzed at a single catalytic site and attains maximal velocity when three catalytic sites are saturated with MgATP.

The hydrolytic properties of the alpha3beta3gamma and mutant alpha3(betaY341W)3gamma subcomplexes of the TF1-ATPase have been compared. ATPase activity of the mutant is less sensitive to turnover-dependent inhibition by azide, less suppressed by increasing concentrations of Mg2+ during assay, and less stimulated by lauryl dimethylamine oxide (LDAO). Therefore, it has much lower propensity than wild-type to entrap inhibitory MgADP in a catalytic site during turnover. The fluorescence of the introduced tryptophans in the alpha3(betaY341W)3gamma subcomplex is completely quenched when catalytic sites are saturated with ATP or ADP with or without Mg2+ present. As reported for the betaY331W mutant of Escherichia coli F1 (Weber, J., Wilke-Mounts, S., Lee, R. S.-F., Grell, E., Senior, A. E. (1993) J. Biol. Chem. 268, 20126-20133), this provides a direct probe of nucleotide binding to catalytic sites. Addition of stoichiometric MgATP to the mutant subcomplex quenched one-third the tryptophan fluorescence which did not recover after 60 min. This was caused by entrapment of MgADP in a single catalytic site. Titration of catalytic sites of the alpha3(betaY341W)3gamma subcomplex with MgADP or MgATP revealed Kd's of < 50 nM, about 0.25 microM and about 35 microM. Titrations were not affected by azide, whereas LDAO lowered the affinities of catalytic sites 2 and 3 for MgADP by 5-fold and 2-fold, respectively. During titration with MgATP, LDAO slightly lowered affinity at ATP concentrations below 30 microM and had no effect at ATP concentrations above 30 microM. Maximal velocity was attained when the third catalytic site was titrated with MgATP in the presence or absence of LDAO. The same Kd's for binding MgATP to the (alphaA396C)3beta3(gammaA22C) mutant were observed before and after inactivating it by cross-linking alpha to gamma. This implies that the different affinities of catalytic sites for MgATP do not represent negative cooperativity, but rather represent heterogeneous affinities of catalytic sites dictated by the position of the coiled-coil of the gamma subunit within the central cavity of the (alpha beta)3 hexamer.

Adenosine Diphosphate↗

Restoration of the activity of active-site mutants of the hyperthermophilic beta-glycosidase from Sulfolobus solfataricus: dependence of the mechanism on the action of external nucleophiles.

The beta-glycosidase from the hyperthermophilic Archaeon Sulfolobus solfataricus hydrolyzes beta-glycosides following a retaining mechanism based upon the action of two amino acids: Glu387, which acts as the nucleophile of the reaction, and Glu206, which acts as the general acid/base catalyst. The activities of inactive mutants of the catalytic nucleophile Glu387Ala/Gly were restored by externally added nucleophiles. Sodium azide and sodium formate were used as external nucleophiles and the products of their reaction were characterized. Glu387Ala/Gly mutants were reactivated with 2, 4-DNP-beta-Glc substrate and the Glu387Gly mutant showed recovered activity, with the same nucleophiles, also on 2-NP-beta-Glc. The reaction catalyzed by the Glu387Gly mutant proceeded differently depending on the type of externally added nucleophile. Sodium azide restored the catalytic activity of the mutant by attacking the alpha-side of the anomeric carbon of the substrates, thereby yielding an inverting glycosidase. Sodium formate promoted the opposite behavior (retaining) in the mutant, producing 3-O-beta-linked disaccharide derivative of the substrates. A possible role of sodium formate as a biomimicking agent in replacing the natural nucleophile Glu387 is also discussed.

Binding Sites↗

Catalytic two-electron reductions of N2O and N3- by myoglobin in surfactant films.

Myoglobin (Mb), in films of dimethyldidodecylammonium bromide (ddab) on graphite electrodes, is used as a catalyst to mediate the electrochemical reduction of nitrous oxide (N2O) as well as the isoelectronic ion azide (N3-) in aqueous solutions. The electrocatalytic reductions are characterized by a rate-dependent irreversibility in cyclic voltammograms of Mb/ddab in the presence of the substrates. Bulk electrolysis shows that the reduction of 15N15NO by Mb/ddab yields 15N15N as shown by GC/MS. The catalytic reduction of azide results in almost quantitative formation of ammonia. These electrocatalytic processes are rationalized as two-electron reductions, with the catalyst cycling between the Fe(I) and Fe(III) states of Mb. To our knowledge, this is the first characterization of N2O reduction by an Fe porphyrin or heme protein.

Animals↗

Investigating cellular metabolism of synthetic azidosugars with the Staudinger ligation.

The structure of sialic acid on living cells can be modulated by metabolism of unnatural biosynthetic precursors. Here we investigate the conversion of a panel of azide-functionalized mannosamine and glucosamine derivatives into cell-surface sialosides. A key tool in this study is the Staudinger ligation, a highly selective reaction between modified triarylphosphines and azides that produces an amide-linked product. A preliminary study of the mechanism of this reaction, and refined conditions for its in vivo execution, are reported. The reaction provided a means to label the glycoconjugate-bound azidosugars with biochemical probes. Finally, we demonstrate that the cell-surface Staudinger ligation is compatible with hydrazone formation from metabolically introduced ketones. These two strategies provide a means to selectively modify cell-surface glycans with exogenous probes.

Acetylglucosamine↗

A fluorogenic dye activated by the staudinger ligation.

Specific labeling of biomolecules with biochemical and biophysical probes is a central element of proteomics research. Here we describe a coumarin-phosphine dye that undergoes activation of coumarin fluorescence upon Staudinger ligation with azides. Since azides can be metabolically incorporated into cellular proteins and oligosaccharides, this dye may be a useful tool for profiling proteins and their posttranslational modifications.

Animals↗

Probing glycosyltransferase activities with the Staudinger ligation.

The development of rapid screening methods for probing glycosyltransferase activities is essential for advancing the field of glycobiology. While assays for specific glycosyltransferases exist, there is no generalizable method that can be applied across the enzyme superfamily. Herein we describe a novel glycosyltransferase assay that exploits their unnatural substrate tolerance and the unique chemical reactivity of the azide. We applied this "azido-ELISA" to the family of polypeptide alpha-N-acetylgalactosaminyltransferases (ppGalNAcTs), all of which were able to transfer N-azidoacetylgalactosamine (GalNAz) from the unnatural nucleotide sugar donor UDP-GalNAz. The azide was detected and quantified by Staudinger ligation with a phosphine probe in a microtiter plate format. This approach should be applicable to any glycosyltransferase or group-transfer enzyme that tolerates unnatural azido substrates.

Amino Acid Sequence↗

Mechanistic investigation of the staudinger ligation.

The Staudinger ligation of azides and phosphines has found widespread use in the field of chemical biology, but the mechanism of the transformation has not been characterized in detail. In this work, we undertook a mechanistic study of the Staudinger ligation with a focus on factors that affect reaction kinetics and on the identification of intermediates. The Staudinger ligation with alkyl azides was second-order overall and proceeded more rapidly in polar, protic solvents. Hammett analyses demonstrated that electron-donating substituents on the phosphine accelerate the overall reaction. The electronic and steric properties of the ester had no significant impact on the overall rate but did affect product ratios. Finally, the structure of an intermediate that accumulates under anhydrous conditions was identified. These findings establish a platform for optimizing the Staudinger ligation for expanded use in biological applications.

Azides↗

Shell click-crosslinked (SCC) nanoparticles: a new methodology for synthesis and orthogonal functionalization.

A new methodology for the preparation of well-defined core-shell nanoparticles was developed, based upon the employment of a multifunctional crosslinker to coincidently stabilize supramolecular polymer assemblies and imbed into the shell unique chemical functionalities. Amphiphilic diblock copolymers of poly(acrylic acid)(80)-b-poly(styrene)(90) that had been assembled into micelles and partially functionalized throughout the corona with alkynyl groups were utilized as Click-readied nanoscaffolds for the formation of shell Click-crosslinked nanoparticles (SCCs). Divergently grown dendrimers of the zero, first, second, and third generations having increasing numbers of azide terminating groups ((N(3))(2)-[G-0], (N(3))(4)-[G-1], (N(3))(8)-[G-2], and (N(3))(16)-[G-3], respectively) were investigated as crosslinkers via Click reactions with the alkynyl groups to form covalent linkages throughout the block copolymer micelle corona, thus forming a crosslinked shell. The crosslinking reactions were characterized by (1)H NMR and IR spectroscopies, differential scanning calorimetry (DSC), and dynamic light scattering (DLS) measurements. Only the first generation dendrimer ((N(3))(4)-[G-1]) possessed a sufficient balance of polyvalency and water solubility to achieve crosslinking and establish a robust nanostructure. The resulting SCC was further characterized with atomic force microscopy (AFM), transmission electron microscopy (TEM), and analytical ultracentrifugation (AU). The dendritic crosslinker is important as it also allows for the incorporation of excess functionality that can undergo complementary reactions. Within the shell of this SCC the remaining azide termini of the dendrimer crosslinker were then consumed in a secondary Click reaction with an alkynyl-functionalized fluorescein to yield a fluorescently labeled SCC that was characterized with DLS, AFM, TEM, AU, UV-vis, and fluorescent measurements as a function of pH.

Acrylic Resins↗

Synthesis of degradable model networks via ATRP and click chemistry.

A simple scheme involving atom transfer radical polymerization (ATRP) from a bifunctional initiator, conversion of the bromine end groups of the resulting telechelic polymer to azides, and cross-linking of this azido-telechelic macromonomer with multi-acetylene functionalized small molecules via copper-catalyzed azide-alkyne cycloaddition was employed to prepare the first tert-butyl acrylate model networks. This general scheme is wide in scope, enabling synthesis of model networks possessing defined pore size from any monomer polymerizable by ATRP. Introduction of an olefin moiety into the ATRP initiator enabled degradation of the materials by ozonolysis to yield star polymer products bearing three or four arms depending on which cross-linker was employed in the parent network. Size-exclusion chromatography of the ozonolysis products confirmed the pore size of the parent network and yielded insight into the number of unreacted functionalities. Model networks derived from a trifunctional alkyne were found to be more completely cross-linked than those derived from a tetrafunctional alkyne, presumably due to less steric hindrance in the former system.

Acrylates↗

Effect of storage on some volatile aroma compounds in fresh-cut cantaloupe melon.

Changes in volatile aroma constituents of fresh-cut cantaloupe melon with storage were determined by headspace solid-phase microextraction gas chromatography-mass spectrometry. The compounds isolated from the fruit immediately after cutting were predominantly aliphatic and aromatic esters. Storage of fruit at 4 degrees C caused a considerable decrease in concentration of esters and synthesis of the terpenoid compounds beta-ionone and geranylacetone over a period of 24 h. This change in the volatile profile with storage is consistent with that of a stress-induced defense response in the cut fruit as an adaptation process to tissue exposure and cell disruption. The same effect occurred in fruit stored at 22 degrees C and in those treated with sodium azide and ascorbic acid prior to storage. Fruit treated with ascorbic acid and sodium azide had higher concentrations of beta-ionone and geranylacetone and retained these compounds better with storage time. The reduction of esters appears to be an important early reaction step in the loss of freshness during storage of fresh-cut cantaloupe.

Ascorbic Acid↗

Facile and efficient synthesis of 4-azidotetrafluoroaniline: a new photoaffinity reagent.

p-Azidotetrafluoroaniline (1) was synthesized in 65-73% yield by two different methods employing a stable carbamate intermediate. The first method trapped the intermediate isocyanate generated via a modified Curtius rearrangement with 2-methyl-2-propanol or 2-(trimethylsilyl)ethanol to form the stable carbamates 2d and 2e, respectively. Benzoic acid 2c was first converted to its acid chloride with PCl(5). Displacement of the chloride by NaN(3) in acetone/water formed the acyl azide. Thermal rearrangement followed by the addition of the appropriate alcohols provided the carbamates. The acid labile carbamate 2d was deprotected with HCl/AcOH to provide 1, while trifluoroacetic acid was required to deprotect 2e and afford 1. In the second path, 1 was synthesized in five steps from pentafluoronitrobenzene (3a) in 65% overall yield. Compound 3a was converted into 4-azidotetrafluoronitrobenzene (3b) with NaN(3) in 93% yield and was used without further purification to form 1, 4-diaminotetrafluorobenzene (3c) by Sn/HCl reduction in 85% yield. The mono-9-fluorenylmethoxycarbonyl (FMOC) derivative 3d was formed from 3c with FMOC-Cl and pyridine in EtOAc in 92% yield. Diazotization of 3d under anhydrous conditions with TFA/NaNO(2) and NaN(3) gave 3e in 87% yield. The aryl azide was formed with concurrent nitration of the 2-position of the fluorenyl system. The protecting group was removed with piperidine to afford 1 in 93% yield. Irradiation of 1 with 254 nm light in cyclohexane gave cyclohexylamine 11, diamine 3c, and azobenzene 12 as the primary products. The formation of C-H insertion product 11 indicates that 1 forms a singlet nitrene upon photolysis. Two heterobifunctional photoaffinity reagents iodoacetamide 9 and dansyl derivative 10 were prepared.

Aniline Compounds↗

Azidomercurations of alkenes: mercury-promoted Schmidt reactions.

Azides bearing a suitably disposed alkene, when treated with either mercuric perchlorate or mercuric trifluoromethanesulfonate, produce bicyclic iminium ions. This new version of the Schmidt reaction proceeds by capture of the mercuronium ion intermediate by the azide to produce an aminodiazonium ion, which suffers a 1,2-shift to give an iminium ion (e.g., 10 --> 16 --> 17 --> 18). Reduction of the iminium ion may then be carried out to produce an amine. Compared to earlier work on the protic acid-promoted intramolecular Schmidt reaction of azido-alkenes, the mercury-promoted Schmidt reaction has several advantages. First, the acid-promoted Schmidt reaction of azido-alkenes requires that the intermediate carbocations be tertiary, allylic, benzylic, or propargylic. The mercury-promoted method has no such limitation; thus even 1,2-disubstituted alkenes may be used. Second, the mercury-promoted method is milder, allowing the presence of acid-sensitive functionality. The protic version, typically employing trifluoromethanesulfonic acid, is limited in its functional group tolerance. Third, whereas carbocation rearrangement is often observed prior to cyclization/rearrangement in the acid-promoted Schmidt reaction, the mercury-promoted method avoids this problem. Fourth, the presence of the mercurio group during the rearrangment may alter the regioselectivity of the 1,2-migration. Finally, the mercury-bearing iminium ions that are the result of the Schmidt reaction were found to be sensitive to protodemercuration, precluding their use in other transformations.

Alkenes↗

Asymmetric homologation of boronic esters bearing azido and silyloxy substituents.

In the asymmetric homologation of boronic esters with a (dihalomethyl)lithium, substituents that can bind metal cations tend to interfere. Accordingly, we undertook the introduction of weakly basic oxygen and nitrogen substituents into boronic esters in order to maximize the efficiency of multistep syntheses utilizing this chemistry. Silyloxy boronic esters cannot be made efficiently by direct substitution, but a (hydroxymethyl)boronic ester has been silylated in the usual manner. Conversion of alpha-halo boronic esters to alpha-azido boronic esters has been carried out with sodium azide and a tetrabutylammonium salt as phase-transfer catalyst in a two-phase system with water and either nitromethane or ethyl acetate. These are safer solvents than the previously used dichloromethane, which can form an explosive byproduct with azide ion. Boronic esters containing silyloxy or alkoxy and azido substituents have been shown to react efficiently with (dihalomethyl)lithiums, resulting in efficient asymmetric insertion of the halomethyl group into the carbon-boron bond.

Azides↗