Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Silver Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96Linked to original sources
PubMed1990

Modification of silver-enhanced sodium transport across toad skin.

1. Silver stimulated short-circuit current and transepithelial potential difference. 2. Cysteine inhibited the silver-induced short-circuit current. 3. There was a dose-response inhibition of silver-induced short-circuit current by cysteine. 4. The silver-induced short-circuit current is carried by a net active sodium transfer from the outside to the inside bathing solution.

Animals↗
PubMedDate not supplied

The time-course of trimethyltin-induced fiber and terminal degeneration in hippocampus.

Trimethyltin (TMT) produces prominent neuron death in the hippocampus. The time-course of TMT-induced damage was studied using reduced-silver procedures for impregnation of degenerating axons and their terminals, and a modified Timm's stain procedure for visualization of hippocampal transitional metals. Standard cell body stains were also used. Fifty-four, adult, Long-Evans rats were gavaged with 6.0 mg TMT/kg b.wt. and 10 rats were gavaged with distilled water as controls. Five TMT-gavaged rats and one saline-gavaged rat were sacrificed on either postgavage day 1, 3, 6, 9, 14, 19, 30, 45, 70 or 99. Histological examination revealed a band of degenerating terminals in the stratum lucidum, below the hippocampal subfields CA3a,b pyramidal cells, by postgavage day 3. This preceded dentate gyrus granule cell loss supplying the mossy fiber input to the stratum lucidum by several days. Hippocampal pyramidal cell necrosis continued through the examination period while dentate granule cell loss subsided between postgavage days 9 and 14. Fiber and terminal degeneration was more extensive in the dorsal hippocampus than in the ventral hippocampus, although Timm's-stained sections revealed "bleaching" of stainable metal in the mossy fiber pathway of the ventral hippocampus. These data suggest that loss of ventral dentate granule cells might reduce TMT-induced necrosis of pyramidal cells in the ventral (temporal) part of the Ammon's horn, possibly by preventing the spread of seizure activity in this region of the hippocampus. Additionally, although previous studies have reported the toxic effects of TMT to last approximately 60 days, the results of the present study indicate that TMT-induced degeneration continues for more than 3 months. Reduced-silver stains, such as the Fink-Heimer procedure, appear to be more sensitive indicators of enduring neuropathology than more traditional cell stains.

Animals↗
PubMed2004

Electrochemical impedance behavior of DNA biosensor based on colloidal Ag and bilayer two-dimensional sol-gel as matrices.

A novel method for fabrication of DNA biosensors has been developed by means of self-assembling colloidal Ag (Ag) to a thiol-containing sol-gel network. The thiol groups of 3-mercaptopropyltrimethoxysilane (MPTS) serve as binding sites for the covalent attachment to gold electrode surface. Then the one-dimensional network of silane unites (1dMPTS) was combined together into a two-dimensional sol-gel network (2dMPTS) by dipping into aqueous NaOH. The second silane layer (B2dMPTS) was formed by immersing electrodes back into the MPTS solution overnight, and then the Ag nanoparticles were chemisorbed onto the thiol groups of the second silane layer. Finally, the mercapto oligonucleotide was self-assembled onto the surface via the Ag nanoparticles. The modified process was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). In addition, we utilized the impedance spectroscopy as a platform for DNA sensing assay. The factors influencing the performance of the resulting biosensor were studied in detail. The linear range of the biosensor was from 8.0 x 10(-9) to 1.0 x 10(-6) M with a detection limit of 4.0 x 10(-9) M at 3sigma. In addition, the experiment results indicate that oligonucleotide immobilized on this way exhibits a good sensitivity and selectivity, high stability and a long-term maintenance of bioactivity.

Binding Sites↗
PubMed1985

Comparison of the exoproducts of gram-negative bacteria by SDS-Page.

The protein exoproducts released during exponential growth of Gram-negative bacteria were analysed and compared by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-Page). The following bacterial strains were tested: Escherichia coli, Klebsiella pneumoniae, Citrobacter freundii, Enterobacter cloacae, Serratia liquefaciens, Serratia rubidaea, Proteus mirabilis, Proteus vulgaris, Salmonella minnesota, Pseudomonas aeruginosa and Pseudomonas fluorescens. It is demonstrated by SDS-Page that members of one species show identical protein pattern, whereas different species show besides comparable protein bands a species characteristic pattern. All members of Enterobacteriaceae were shown to release proteins whose molecular weights fell into the following size regions: Each strain was shown to synthesize a polypeptide of molecular weight 34,000 and one or more polypeptides within the molecular weight range 25,000-29,000. This profile was shown to be clearly different from that of Pseudomonas strains where 20 or more distinct polypeptides ranging from 12,500 to 160,000 Mr were detectable.

Bacterial Proteins↗
PubMed2005

Self-assembled monolayers of aromatic selenolates on noble metal substrates.

Self-assembled monolayers (SAMs) formed from bis(biphenyl-4-yl) diselenide (BBPDSe) on Au(111) and Ag(111) substrates have been characterized by high-resolution X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, infrared reflection absorption spectroscopy, water contact angle measurements, and scanning tunneling microscopy (STM). BBPDSe was found to form contamination-free, densely packed, and well-ordered biphenyl selenolate (BPSe) SAMs on both Au and Ag. Spectroscopic data suggest very similar packing density, orientational order, and molecular inclination in BPSe/Au and BPSe/Ag. STM data give a similar intermolecular spacing of 5.3 +/- 0.4 A on both Au and Ag but exhibit differences in the exact arrangement of the BPSe molecules on these two substrates, with the (2 square root[3] x square root[3])R30 degrees and (square root[3] x square root[3])R30 degrees unit cells on Au and Ag, respectively. There is strong evidence for adsorbate-mediated substrate restructuring in the case of Au, whereas no clear statement on this issue can be made in the case of Ag. The film quality of the BPSe SAMs is superior to their thiol analogues, which is presumably related to a better ability of the selenolates to adjust the surface lattice of the substrate to the most favorable 2D arrangement of the adsorbate molecules. This suggests that aromatic selenolates represent an attractive alternative to the respective thiols.

Absorption↗
PubMed2005

Dodecanethiol-protected copper/silver bimetallic nanoclusters and their surface properties.

Dodecanethiol-protected copper/silver bimetallic nanoclusters were prepared by a liquid-phase method using different copper to silver feed ratios. The morphology and size of the prepared nanoclusters were analyzed with X-ray diffraction (XRD) and transmission electron microscopy (TEM), while their spectroscopic and surface properties were characterized by infrared (IR) and X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and 13C cross-polarization magic angle spinning NMR (13C CPMAS NMR). TEM analysis indicated that all the bimetallic clusters prepared are approximately 4-6 nm in size. On the other hand, the results of XRD, XPS, and Fourier transform infrared (FTIR) spectroscopy suggested that the surfaces of the alloy nanoclusters are mostly enriched with the less noble metal copper atoms. This surface enrichment of copper may be attributed to a galvanic exchange process during preparation, and the extent of enrichment is directly related to the copper feed ratio used. Interestingly, DSC studies showed two melting transitions in some of these alloy samples, suggesting different packing behavior of the dodecanethiol chains onto the heterogeneously intercalated silver- and copper-rich surfaces.

Copper↗
PubMed2006

N- and P-channel transport behavior in thin film transistors based on tricyanovinyl-capped oligothiophenes.

We report the structural and electrical characterization of thin films of organic semiconductor molecules consisting of an oligothiophene core capped with electron-withdrawing tricyanovinyl (TCV) groups. X-ray diffraction and atomic force microscopy of evaporated films of three different TCV-capped oligothiophenes showed that the films were highly crystalline. Electrical transport was measured in thin film transistors employing silver source and drain contacts and channel probes to correct for contact resistance. Three compounds exhibited n-channel (electron) conduction consistent with cyclic voltametry data that indicated they undergo facile reduction. Maximum electron mobilities were 0.02 cm2/V.s with an on/off current ratio of 10(6). A fourth end-capped molecule, TCV-6T-TCV, which had six thiophene rings, exhibited both p- and n-channel transport. Overall, these results confirm that substitution of oligothiophene cores with electron-withdrawing groups is a useful strategy to achieve electron-transporting materials.

Journal Article↗
PubMed1999

A scanning electron microscopic evaluation of root surfaces and the gutta-percha interface following root-end resection in vitro.

AIM: The aim of this study was to evaluate the effects that various commonly used instruments have on root surface morphology, the obturating material, and the interface between the obturation and the root canal walls following root-end resection in vitro. METHODOLOGY: Sixty human single-rooted teeth with fully formed apices were collected and decoronated. The root canals were instrumented, and then obturated with thermoplasticized gutta-percha using AH-26 as the sealer. The roots were randomly divided into 12 different groups, and apical root-end resections were performed using eight different instrument configurations, and two different directions in which the bur moved across the root face in relation to its direction of rotation. Epoxy resin replicas of the resected root ends were examined using scanning electron microscopy. RESULTS: Each instrument produced a characteristic surface finish on the resected root end that mirrored its cutting profile. Irrespective of the design of the bur used, smearing and shredding of the gutta-percha across the root face occurred only when the handpiece was moved across the root face in reverse direction in relation to the direction of rotation of the bur. CONCLUSIONS: To ensure minimal disruption and distortion of the root filling and to prevent shredding of the gutta-percha interface, care should be taken to ensure that the final pass of the bur across the root canal is in the correct direction in relation to its direction of rotation.

Bismuth↗
PubMed1991

Safety versus efficacy of spinal cord stimulation for the generation of motor-evoked potentials in the rat.

The relative safety and efficacy of direct versus indirect methods of spinal cord stimulation for the production of descending motor-evoked responses was studied in pentobarbital-anesthetized rats (n = 39). Electrical stimuli were delivered for 1 h, either directly to the cord dorsum using silver ball electrodes or indirectly through jeweler's screws implanted in the intact laminae. Compound muscle action potentials (CMAPs) were recorded differentially in the quadriceps and evaluated for their morphology and reproducibility. The traumatic effects of stimulation were assessed using intraoperative somatosensory-evoked potentials, blinded neurological examinations for 2 weeks postoperatively, and histopathological and neurochemical analyses in postmortem spinal tissues. In separate experiments, the neural substrates of the muscle-evoked response to indirect cord stimulation were examined. Direct, epidural stimulation of the spinal cord at intensities sufficient to elicit reproducible CMAPs consistently resulted in mild behavioral deficits (13 of 18 animals) that were accompanied by postmortem changes in spinal histology and chemistry. Some of these behavioral deficits (5 of 13 animals) were resolved at 2 weeks. There was rarely an early sign of motor or sensory conduction derangement in these animals. In 2 animals with severe behavioral dysfunction, the somatosensory-evoked response was abolished immediately after spinal stimulation. However, CMAP responses were unaltered. Examination of the strength-duration relationship for the production of threshold responses to translaminar constant current stimulation, as well as experiments using selective transection of the dorsal columns, revealed the CMAP responses to be neurally mediated and conducted through the cord independent of the ascending sensory tracts that mediate the rat's somatosensory-evoked response. Data are discussed in terms of the potential experimental usefulness of CAMPs elicited by indirect dorsal spinal stimulation.

Action Potentials↗
PubMed2004

Bis[tetrakis(triphenylphosphine-kappaP)silver(I)] di-mutrifluoroacetato-kappa4O:O'-bis[bis(trifluoroacetato-kappaO)stannate(IV)].

The crystal structure of the title compound, [Ag(C18H15P)4]2[Sn2(CH3)4(CF3CO2)6], consists of discrete tetrahedral cations and trans-C2SnO4 octahedral dianions [C-Sn-C = 154.6 (2) degrees ]. The dianion lies about a center of inversion and the two Sn atoms are linked unevenly by the carboxylate unit [Sn-O = 2.291 (3) A and Sn <-- O = 2.818 (3) A].

Journal Article↗
PubMed1993

Functional identification of H-K-ATPase in intercalated cells of cortical collecting tubule.

A K-dependent proton extrusion mechanism was investigated by means of fluorescence techniques in rabbit cortical collecting tubules. These experiments were performed in split opened tubules from normal animals exposed to the intracellular pH (pH(i)) indicator 2',7'-bis(carboxyethyl)-5(6)-carboxyfluorescein. This preparation permitted the separate study of the intercalated cells (IC) from the principal cells (PC). In IC pH(i) recovery in response to an acute acid load was observed under Na-free conditions on addition of 5 mM K. This K-dependent recovery of pH(i) in the IC was only partial, but was Sch 28080 inhibitable (10(-5) M) and ouabain insensitive. This suggests the process is mediated by an H-K-adenosinetriphosphatase similar to that of gastric cells. The PC were capable of recovering from the acid load, but this Na-independent response was not blocked by the Sch 28080, suggesting some other mechanism for this result. In both cell types reintroduction of Na into the superfusate resulted in full recovery back to the initial pH(i), presumably the result of Na/H exchange.

Alkalies↗
PubMed2003

Galvanic interaction between gold and amalgam: effect of zinc, time and surface treatments.

BACKGROUND: Previous studies have investigated the electrolytic action of oral electrogalvanism. However, the reasons why certain treatments or materials are successful in reducing galvanic current have not been addressed fully. This study assessed galvanic current with several materials, surface conditions and treatments. METHODS: The authors measured galvanic currents between a type 3 cast gold alloy and Dispersalloy Dispersed Phase Alloy (zinc) (Dentsply Caulk, Milford, Del.) under different surface conditions using a zero-resistance-ammeter technique in a synthetic saliva solution for 10 hours. In addition, the galvanic currents between the same gold and Tytin alloy (non-zinc) (Kerr, Orange, Calif.), experimental zinc alloy (same makeup as that of Tytin, with the addition of zinc) and non-zinc dispersed-phase experimental alloy (essentially the same physical and chemical makeup as that of Dispersalloy, with the exclusion of zinc) were measured. Triplicate tests were performed for each condition. RESULTS: The statistical analysis indicated that electrogalvanic activity is reduced significantly when the amalgam surface is treated with tin oxide or silver nitrate. Both zinc-containing amalgams in their as-carved condition exhibited higher anodic charge densities than did their zinc-free counterparts. Galvanic current measured in Dispersalloy was reduced with the passage of time after carving. CONCLUSION: Galvanic interaction between cast gold and amalgam is reduced with time and surface treatments, but is increased considerably when the amalgam contains zinc. CLINICAL IMPLICATIONS: Amalgam restorations containing zinc that are in contact with gold restorations occasionally elicit galvanic pain. Selection of a non-zinc-containing amalgam will reduce the level of galvanic interaction. Galvanic pain from occlusal contact is reduced or eliminated when the restoration is brushed with tin oxide immediately after carving or is treated with 2 percent silver nitrate. Some patients may benefit from having their teeth separated with nonconducting rubber dam material.

Analysis of Variance↗