Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “PLASTER CASTS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95Linked to original sources
PubMed1991

[Impression materials. Dimensional stability after pouring].

The Authors wanted to establish which could be for every impression material tested, the most favourable moment for the development of plaster models in a steady environment conditions of temperature and relative humidity. From the analysis of the results obtained, we can clearly conclude that every material examined offers an ideal time interval in which we have to cast the model in plaster. This study aspires to be an invitation to all operator in the sector, to repeat this experience in their work environment to know and better manage the procedures and the materials used, from the taking the impression to the executing of the plaster model.

Colloids↗
PubMedDate not supplied

Accurate determination of cast weight for neonates with clubfoot.

The purpose of this study was to determine changes in cast weight during the first 48 hours after application so that the true weight of a neonate can be estimated without the need for removing the cast. Five types of cast materials were compared. Cast weight measurements were obtained before and after application and at intervals during 48 hours. Final cast weight averaged 107.5% of dry weight for plaster and 99% of dry weight for synthetic cast materials. For very low birth weight infants, the difference between the initial wet weight of plaster of Paris and its final dry weight may be significant for calculating drug and fluid dosages. The weight of an infant can now be calculated without the necessity of cast removal.

Casts, Surgical↗
PubMed2000

A human skull cast model for training of intracranial microneurosurgical skills.

Skillful microsurgical techniques such as microvascular anastomosis and repair of nerves require dedicated and extensive laboratory training. Human microneurosurgery poses several additional technical difficulties, as the intracranial procedures are often performed through a narrow operative space at a considerable length, using knee-bend instruments. This article presents a laboratory model to simulate microneurosurgical procedures in humans. A human skull cast model made from plaster is cut such that, when placed on a operating table, it represents a standard position of a pterional approach and that the point of operation is at the same depth as the hypothetical circle of Willis. A standard pterional opening is made in de skull cast and the model is placed over the rat. Subsequently, all surgical procedures starting from tissue preparation to performing an arterial, venous, and/or nerve repair are performed with the cast over the rat using microneurosurgical knee-bent instruments and a surgical microscope. Microsurgical procedures such as end-to-end vessel anastomosis and nerve repair are technically much more challenging and difficult to execute when performed through the pterional opening of the human skull cast than without the cast model. Moreover, the cast model useful in training microsurgical techniques performed with long knee-bend instruments. It is concluded that the skull cast model represents a useful method to train intracranial microneurosurgical blood vessel anastomosis and nerve repair.

Humans↗
PubMed1999

Hybrid casts: a comparison of different casting materials.

Casting and splinting materials used in orthopedics have historically consisted of plaster of Paris and, more recently, fiberglass. Plaster is cost-effective and malleable enough to help to hold reductions. Fiberglass is stronger and lighter, but more expensive. The hybrid cast of plaster and fiberglass optimizes the advantages of both materials in fracture management; it is sufficiently strong, yet still cost-effective.

Biomechanical Phenomena↗
PubMedDate not supplied

The management of forearm fractures in children: a plea for conservatism.

A retrospective review was undertaken to evaluate the efficacy of primary nonoperative treatment (closed reduction and long-arm casting) along with pins and plaster as a salvage technique for those reduction failures. A total of 730 closed fractures (1987-1993) was compiled, of which 300 required closed reductions and casting. Excluded from the study were teenagers whose growth plates were closed. Of the 300 fractures requiring closed reductions, 22 went on to require remanipulations, and 12 required the use of pins-and-plaster technique to obtain or maintain satisfactory reduction. Complications in the group treated in this manner included two superficial pin infections treated with antibiotics and two forearms with moderate loss of pronation/supination not requiring treatment. We believe that closed reduction of pediatric forearm fractures remains the accepted standard and the technique of pins and plaster should be considered a reliable alternative for the unstable injuries.

Adolescent↗
PubMed1993

Post-traumatic osteoporosis and algodystrophy after external fixation of tibial fractures.

The incidence of two forms of post-traumatic osteoporosis and algodystrophy in the ankle region of 20 patients with displaced diaphyseal fractures of the tibia treated with external fixation were studied. Acute localised osteoporosis (ALO) occurred in 14 (70 per cent) and 5 (25 per cent) developed algodystrophy. ALO was significantly less frequent in matched patients treated by internal fixation or by external plaster-of-Paris (POP) cast. Regional osteoporosis (RO) was most common in POP patients. The presence of ALO may indicate the development of algodystrophy following tibial fracture. Our findings suggest that external fixation may predispose to ALO and algodystrophy.

Acute Disease↗
PubMed2003

Hydroxyapatite cement scaffolds with controlled macroporosity: fabrication protocol and mechanical properties.

Precipitated hydroxyapatite cement scaffolds with macroporosity of controlled size and shape were successfully built using a solid freeform fabrication process. The negative macroporosity was designed using CAD software and built with an inkjet machine. A slip casting process using a plaster mold was used to precipitate the cement and manufacture samples for mechanical testing. The negative macroporosity was then extracted from the samples using a thermal process. Compression, tension and torsion tests were completed successfully on the precipitated hydroxyapatite cement samples in moist condition. Elastic and strength properties were measured for these three loading cases and compared to the plain hydroxyapatite cement properties reported in a previous study. Homogenization theory was applied to estimate the elastic properties of the manufactured scaffolds. A good correlation was obtained between the experimental data and the theory.

Bone Cements↗
PubMed1992

A five year review of anaerobic, necrotizing soft tissue infections: a nursing perspective.

Anaerobic necrotizing soft tissue infections are known for their devastating effects of tissue destruction and death. These infections may occur as a result of trauma, surgical intervention or occur spontaneously in predisposed individuals. They are caused by a wide range of anaerobic organisms and may be categorised according to the tissue involvement as Necrotizing Fasciitis and Myonecrosis. A five year review of patients admitted for hyperbaric oxygen (HBO) therapy and requiring intensive care revealed a patient group numbering 25, roughly equally divided between the two classifications of tissue involvement. Trauma was an aetiological factor in 5 of these cases. Cancer and diabetes mellitus were also prominent aetiological factors. Treatment consisted of the triad of early selective/aggressive surgery, high dose antibiotic therapy and HBO therapy. The mortality of the group was 25%. Delay in treatment was associated with increased mortality. Nursing care, for this particular patient group is demanding, requiring particular attention to wound care, analgesia, transport, psychosocial care of patient with mutilating wounds, nutrition and temperature homeostasis. It is a cause for concern that two cases occurred after elective orthopaedic procedures requiring the application of plaster of paris (POP) cast over a leg.

Adolescent↗
PubMed2001

Curved molar root canal preparations using Hero 642 rotary nickel-titanium instruments.

AIM: The Bramante method was used to study how the natural curvature of root canals was modified when using the Hero 642 nickel-titanium rotary system. METHODOLOGY: Twenty-four canals were selected in freshly extracted human mandibular molars. Every root canal had an angle of curvature greater than 20 degrees. Roots were embedded in clear casting resin using a plaster mould. Cross-sectional cuts were made in the apical, middle and coronal thirds of each root. A first group (control) of 12 curved root canals was prepared using stainless steel hand instruments and the step-back technique. A second group of 12 curved root canals was instrumented using the Hero sequence according to the manufacturer's instructions. For each sectioning level, the amount of dentine removed, the change of shape factor and the canal centre displacement were calculated with the aid of a digital image analysis system. The results were subjected to the Mann-Whitney U-test. RESULTS: No significant difference occurred in the amount of dentine removed, change of shape factor or canal centre displacement in the coronal and middle thirds of the curved canals. In the apical third, transportation was significantly higher (P=0.0171) with stainless steel hand instruments than with the Hero system. CONCLUSIONS: The original canal shape was maintained better in the apical third of curved canals when using the Hero system in a crown-down technique when compared to a hand preparation technique with stainless steel instruments.

Adult↗
PubMed2005

Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations.

Evaluation of the marginal and internal fit of all-ceramic molar crown-copings hypothesizing that Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) fabrication shows the same accuracy of fit as conventional techniques. A set of six individual crown preparations was duplicated 12 times yielding 72 plaster dies. Slip-cast (In-Ceram Zirconia), heat-pressing (Empress II) and CAD/CAM crown-copings (Cerec inLab, DCS, Decim and Procera) were seated on 12 dies each. Marginal and internal gap width was measured in the SEM at 120x magnification. Marginal gap of slip-cast (25 +/- 18 microm) was significantly (P < 0.05) smaller than that of Empress II (44 +/- 23 microm) copings. Procera (17 +/- 16 microm) and Decim (23 +/- 17 microm) did not differ (P > 0.05) from slip-cast (25 +/- 18 microm) but were smaller (P < 0.001/P < 0.01) than Empress II (44 +/- 23 microm) and Cerec inLab (43 +/- 23 microm) (P < 0.001/P < 0.05). DCS (33 +/- 20 microm) did not differ (P > 0.05) from any of the others. The internal mid-orobuccal gap width of Procera (136 +/- 68 microm) was larger (P < 0.001) than that of Decim (81 +/- 30 microm) and slip-cast (94 +/- 84 microm) (P < 0.05) while Empress II (105 +/- 53 microm), DCS (110 +/- 79 microm) and Cerec inLab (114 +/- 58 microm) did not differ significantly (P > 0.05) from Decim, Procera and slip-cast. Internal mesiodistal gap width was similar. The fit of conventional and CAD/CAM all-ceramic molar crown-copings covered the same range of gap width confirming the assumed hypothesis.

Ceramics↗
PubMed1980

Early and late repair of lateral ligament of the ankle.

Utilizing an apparatus for separately testing the status of the anterior talofibular and the calaneofibular ligaments of the ankle in 25 healthy, 15- to 30-year-old adults, it became apparent that the stability of the ankle depends primarily upon the integrity of the anterior talofibular ligament. When the "fore n' aft" stress measurement exceeds 4 mm, a positive anterior drawer test is elicited, and the ankle ligament needs surgical repair. Tibial talar tilt normals ranged up to 18 degrees. Repair (early and late) is accomplished by suturing what one finds (there is always some ligament present) and reinforcing the anterior talofibular ligament repair with overlap of the nearby lateral talocalcaneal ligament plus the marginal ankle retinaculum. Four weeks in a plaster of paris walking cast are followed by use of Ace bandages of 2 weeks. Light activity is begun 6 weeks after repair, and activity of choice is begun 8 weeks after repair. Repeat stress testing is performed at 3 months postsurgery, and a questionnaire is completed at the same time. On a point system (1 to 10) reviewing pain, stability, and swelling, the results in 50 cases rate from 8 to 10, with a lower rating improving with more time. Surgical time is approximately 30 minutes. There seems to be no need for more radical surgery utilizing other muscles. The senior author has employed this surgery for the past 19 years with approximately 165 cases. Only 50 patients with proper 3-month postoperative stress testing and questionnaire follow-up, who were operated upon 1 or more years ago, area recorded here.

Adolescent↗
PubMed1998

Late treatment of brachial plexus palsy secondary to birth injuries: rotational osteotomy of the proximal part of the humerus.

We retrospectively reviewed the results of rotational osteotomy that had been performed distal to the surgical neck of the humerus in twenty-two patients who had sustained an injury of the brachial plexus at birth. Eighteen patients had a lesion of the superior trunk of the brachial plexus (the fifth and sixth cervical nerve roots), and four had involvement of the entire brachial plexus. The patients ranged in age from four to seventeen years old (average age, ten years and three months old) at the time of the operation. The average duration of follow-up was fourteen years (range, two to thirty-one years). Preoperatively, the patients had been unable to perform self-care activities, such as grooming, feeding, and washing themselves, because of limited active external rotation or fixed internal rotation of the shoulder. All patients had decreased strength of the lateral rotator and abductor muscles and normal strength of the subscapularis and pectoralis major muscles. Radiographs showed some flattening of the humeral head, and four patients had posterior subluxation of the humeral head. A lateral rotational osteotomy of the proximal part of the humerus was performed between the insertions of the subscapularis and pectoralis major muscles. The site of the osteotomy was stabilized with catgut sutures in the periosteum in ten patients and with one or two staples in twelve. The extremity was immobilized in a plaster shoulder-spica cast for six weeks. At the latest follow-up evaluation, the average increase in active abduction was 27 degrees (range, 0 to 60 degrees) and the average increase in the arc of rotation was 25 degrees (range, 5 to 85 degrees). Supination of the forearm also had increased commensurate with the increase in external rotation. The appearance of the extremity had improved as well.

Activities of Daily Living↗