Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Thermal Diffusion”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94Linked to original sources

Vascular malformations of the gastrointestinal tract.

The advent of fiberoptic endoscopy, which became widespread in the evaluation of gastrointestinal bleeding throughout the late 1970s and 1980s, has dramatically changed both our understanding of the extent to which vascular malformations account for gastrointestinal blood loss and our ability to treat these lesions at the time of diagnosis. Colonic vascular malformations appear to be the single most common cause of acute or recurrent gastrointestinal bleeding episodes in patients over 60 years of age, being responsible for the bleeding in as many as 35% of such patients. Although less common as a cause of upper gastrointestinal bleeding, these lesions still account for 2% to 5% of bleeding lesions in older patients. Diagnosis is accomplished by endoscopy, and the vascular malformations can then be coagulated via the endoscope using one of a number of thermal systems. The argon laser, the heater probe, and the BICAP system are all effective and safe throughout the gastrointestinal tract, especially in the cecum and right colon, where the majority of sporadic vascular malformations occur. Monopolar cautery and the Nd:YAG laser are equally efficacious, but their greater and less predictable depth of coagulation make them much less safe in the cecum and right colon. There are no apparent advantages in terms of efficacy and safety between laser treatment and the other thermal modalities. The laser has the advantage of being quicker, which is especially important when treating large or multiple lesions. The other modalities have the advantages of portability and low relative cost. Endoscopic therapy with lasers or other thermal devices is nonspecific. The effects are achieved by thermally coagulating the mucosal vascular lesions, allowing the coagulated tissue to slough, and leaving a mucosal ulceration that subsequently heals with re-epithelialization. Endoscopic coagulation has thus been reported effective in the treatment of gastrointestinal mucosal vascular lesions regardless of their etiology or characteristics. It has been effective for sporadic vascular malformations, hereditary hemorrhagic telangiectasia (Osler-Weber-Rendu disease), radiation proctocolitis, the blue rubber-bleb nevus syndrome, and diffuse gastric antral vascular ectasia (the watermelon stomach). As we move through the 1990s and beyond, these endoscopic modalities offer an effective, relatively safe, and clearly less invasive treatment option for the many patients who experience acute, recurrent, or chronic gastrointestinal bleeding from any of these lesions.

Blood Vessels↗

Dynamic fluctuations and spatial inhomogeneities in poly(N-isopropylacrylamide)/clay nanocomposite hydrogels studied by dynamic light scattering.

The contributions of the dynamic fluctuations and the frozen-in inhomogeneities to the total light scattering intensity observed in poly(N-isopropylacrylamide)/clay nanocomposite hydrogels were analyzed by applying the nonergodic method proposed by Pusey and van Megen. Approximately 90% of the total scattering intensity corresponds to the frozen-in component. The scattering intensity of the fluctuating component is smaller by far than that of a pure clay suspension, indicating that the thermal fluctuations of the clay particles are largely suppressed upon network formation. Accordingly, the fluctuating component consists of two contributions: one due to the polymer chains and the other, smaller one representing the residual mobility of the clay particles. The latter depends on how tightly the clay particles are fixed in the network. The dynamic features of the nanocomposite hydrogels are described by two relaxation modes. The fast one is purely diffusive and can be related to a dynamic correlation length of 6-8 nm, which is similar to that of a corresponding polymer solution. The relaxation time of the slow mode varies appreciably with sample position even though the data had been treated with the nonergodic method.

Journal Article↗

Double dendrite growth in solidification.

We present experiments on the doublon growth morphology in directional solidification. Samples used are succinonitrile with small amounts of poly(ethylene oxide), acetone, or camphor as the solute. Doublons, or symmetry-broken dendrites, are generic diffusion-limited growth structures expected at large undercooling and low anisotropy. Low anisotropy growth is achieved by selecting a grain near the {111} plane leading to either seaweed (dense branching morphology) or doublon growth depending on experimental parameters. We find selection of doublons to be strongly dependent on solute concentration and sample orientation. Doublons are selected at low concentrations (low solutal undercooling) in contrast to the prediction of doublons at large thermal undercooling in pure materials. Doublons also exhibit preferred growth directions and changing the orientation of a specific doublonic grain changes the character and stability of the doublons. We observe transitions between seaweed and doublon growth with changes in concentration and sample orientation.

Journal Article↗

An improved negative staining technique using a thin quartz membrane as sample support.

A negative staining technique is presented based on the use of 40-60 nm quartz membrane supported by a silicon grid. The quartz membrane is fabricated by thermal growth of silicon dioxide on a silicon substrate followed by an anisotropic silicon etching step giving rectangular holes in the silicon substrate. The hydrophilic membrane is shown to be ideally suited for negative staining due to its spreading characteristics, homogeneity, heat resistance and mechanical stability. Micrographs of phage lambda are presented showing the detailed structure of the tail. A simple method of calculating the number of adsorbed particles based on diffusion limited association is also presented.

Microscopy, Electron↗

[HPLC determination of low concentrations of benzene].

A laboratory study, using generated atmosphere containing 0.14/23.3 mg/m3 of Benzene, was conducted to adapt an existing industrial hygiene monitoring method for measuring low concentrations of Benzene. This method was developed to determine concentrations of Benzene in the ambient air and around refinery/petrochemical plant. The air sample is collected on a diffusive personal sampler (Zambelli-TK 200) and analyzed by desorption with a mixture of methylene chloride and ethyl acetate followed by quantification using HPLC-Fluorescence detector. The method used did not detect aliphatic or alicyclic hydrocarbons. The HPLC-Fluorescence method is compared with a gas chromatographic method that uses capillary column and flame ionization detection after a collection of air sample on a Carbotrap 100 tube and following thermal desorption.

Air Pollutants↗

Effects of thermal endometrial ablation. Clinicopathologic correlations.

Electrothermal ablation of endometrium was performed on 207 women for abnormal and sometimes painful uterine bleeding. Recurrence of symptoms or inadequacy of treatment led to hysterectomy in 33 women at intervals of 2 weeks to 60 months. Patterns of uterine tissue destruction, healing and repair, and endometrial regeneration were correlated with the postablation interval. The endometrial thickness was completely destroyed. Necrosis dominated the first month, and a chronic repair-regeneration phase followed. Foreign body giant cells reacted with necrotic eschar, remnants of which were present to 47 months. Intact endometrium regenerated focally in 10 uteri and diffusely in 5. Indications for hysterectomy were attributed directly to ablation failure in 18 of 33 cases. Familiarity with the morphologic effects of ablation will aid in relating ablation failures to direct mechanisms, complications of the procedure, or unrelated events.

Adult↗

A molecular dynamics study of the structure and evolution of the 4,4'-bis(diphenylhydroxymethyl)biphenyl/acetone host-guest system

The 4,4'-bis(diphenylhydroxymethyl)biphenyl/acetone (DHMB-Ac) system was studied by NPT molecular dynamics (MD) calculations; the study was prompted by the availability of X-ray single-crystal diffraction and calorimetric data (L. Johnson, L. Nassimbeni, E. Weber and K. Skobridis, J. Chem. Soc. Perkin Trans. 2, 1992, 2131). Potential energies were calculated by using the UNI-FF or the OPLS all-atom force fields. The kinetics of formation of hydrogen-bonded aggregates between the DHMB molecule and acetone was sampled, and the persistence and fluxionality of the O-H...O=C hydrogen bond are clearly revealed. Extensive MD runs at variable temperature on the inclusion compound in its crystalline state allow a description of the thermal motion and eventual reorientation within its cavity of the acetone molecule; the host crystalline matrix does not survive when guests are removed. The dynamic evolution of a slab of 60 DHMB and 120 acetone molecules. which has the experimental crystal structure, was also simulated at the temperature experimentally observed for guest desorption, and the loss of solvent molecules was monitored. Crystalline order is very quickly lost; then, guest molecules can easily diffuse away from the surface without a noticeable swelling of the material. The molecular reorganization of the remaining host liquid back to the crystal structure of one of the two polymorphs of pure DHMB could not be observed, owing to the short simulation times and to the smallness of the computational sample.

Journal Article↗

Nonequilibrium membrane fluctuations driven by active proteins.

We extend a model for nonthermal membrane undulations driven by active (adenosine triphosphate-dependent or light-harvesting) membrane proteins [N. Gov, Phys. Rev. Lett. 93, 268104 (2004)]. The present model accounts for the fact that proteins can diffuse laterally across the membrane surface and that individual proteins are expected to exert forces preferentially in one normal direction over the other (due to their orientation within the bilayer). The addition of these effects alters the scaling of fluctuation amplitudes with system size. Additionally, theoretical arguments and dynamic simulations both suggest that, in certain regimes, the probability distribution of fluctuation amplitudes is expected to be non-Gaussian (in contrast to thermal systems).

Biomechanical Phenomena↗

The effect of the physical properties of the tube wall on the attenuation of sound in evaporating and condensing gas-vapor mixtures

An investigation of sound propagation in an air-water vapor mixture contained in a cylindrical tube with wet walls was recently completed [Hickey et al., J. Acoust. Soc. Am. 107, 1126-1130 (2000)]. A generalization to include the heat flux at the tube wall is presented here. The attenuation of sound in air-water vapor mixtures can be affected by the thermal properties of the tube wall. The controlling parameter is epsilons, which is a proportionality constant that relates the heat flux per degree Kelvin for the substrate to that of the gas mixture. For a given amount of heat, provided by expansion and rarefaction of the working fluid, different substrates will undergo different temperature excursions. These temperature swings at the boundary change the vapor pressure of the condensate and thus reduce the diffusion of vapor to and from the boundary resulting in a reduction of the attenuation.

Journal Article↗

A hydrodynamic study of collagen fibrillogenesis by electric birefringence and quasielastic light scattering.

Neutral soluble collagen was extracted from lathyritic rat skin under proteolysis-inhibited conditions. Purified solutions were characterized by electric birefringence and heterodyne beat quasi-elastic light-scattering techniques under conditions where the monomeric form was stable (at 4 degrees C in 0.032 M phosphate buffer at pH 7.04). Solutions were then heated and the birefringence and light scattering followed during the fibrillogenesis reaction. The monomer presents a translational diffusion coefficient of 0.85 X 10(-7) cm2/s and a rotary diffusion coefficient of 1150 +/- 50 s-1; these values are consistent with a rodlike molecular model of 220 +/- 10 nm length and 4 +/- 1 nm diameter, substantially different from electron microscopic values of 290 and 1.5 nm, respectively. We propose that at pH 7.04 and relatively high ionic strength, the collagen monomer unit must exhibit substantial deviation from a completely rigid and extended rodlike structure. During the entire lag phase in a thermally induced fibrillogenesis reaction, the relaxation times for both translational and rotational motion remain virtually unchanged. The monomer polarity is also unchanged, as shown by reverse pulse birefringence data. No intermediate size soluble aggregates, such as dimers or trimers, have been detected between monomer and very large aggregates or fibrils during the process, although early multistep assembly products (dimers, trimers) could have been seen if present. These data suggest a model for fibrillogenesis emphasizing a monomer-related nucleation event, such as internal stiffening or conformational transition, followed by a rapid continuous growth up to large fibrils.

Animals↗

Design and evaluation of a cryogenic soft tissue fixation device -- load tolerances and thermal aspects.

Mechanical studies of soft connective tissues often encounter methodological difficulties, particularly in the secure fixation of the tissues. A simple, inexpensive technique which allowed stable cryofixation of soft tissues in uniaxial loading machines was developed. The cryogenic fixation device was evaluated in terms of its fixation strength and the temperature gradients within the tested tissues. Human patellar ligaments and quadriceps tendons were tested successfully to an average failure load of 2219N (S.D. 448N) with mid-substance failures occurring in 90% of the specimens. The temperature gradients within porcine flexor and extensor tendons were determined and found to exhibit a typical diffusion profile. The fixation quality was dependent upon the initial block temperature and the desired testing time. In summary, the cryofixation device presented here is an effective tool for soft tissue fixation but the effect of this type of fixation on internal tissue temperatures and possible testing times must be acknowledged.

Adult↗

Induction of alpha-helix in the beta-sheet protein tumor necrosis factor-alpha: acid-induced denaturation.

Acid-induced unfolding of proteins often results in an intermediate structure, called the molten globule structure or "A" state, which retains at least partial secondary structure but lacks a rigid tertiary structure. Acid-induced unfolding has been studied extensively for alpha-helical proteins, while few studies have been done on proteins containing only beta-strands. Tumor necrosis factor-alpha (TNF-alpha) is a trimer in which the individual subunits consist of antiparallel beta-sheet, organized into a jellyroll beta-sandwich. We have found previously [Narhi et al. (1996) Biochemistry 35, 11447-11453] that thermal denaturation of TNF-alpha results in an aggregate which contains a substantial amount of alpha-helix and that the addition of trifluoroethanol induces alpha-helix in both murine and human TNF-alpha. Here we show that acid also can induce alpha-helix in these proteins. At acidic pH (below 4), both human and murine TNF-alpha convert to a monomeric form, as determined by sedimentation and diffusion constants obtained from sedimentation velocity experiments. The sedimentation coefficient indicated that this monomer was only slightly expanded relative to the native state. Near-UV circular dichroic (CD) analysis showed a loss of tertiary structure. These structural features coincide with the notion that the acid-induced structure of TNF-alpha is a molten globule. What is unique in this protein is that TNF-alpha acquires alpha-helical structure, which is not present in the native structure as determined by both CD and Fourier transform infrared spectroscopy. Even more surprising is that TNF-alpha at pH 3.3 undergoes a very gradual noncooperative change in secondary structure upon heating, which results in an increase in alpha-helical content. At pH 2.2 in the absence of salt, TNF-alpha shows considerable alpha-helix, although heating does not change the spectrum. At pH 2.2, physiological salt decreases the amount of alpha-helix at ambient temperature, and upon heating, we see the noncooperative increase in alpha-helix as observed at pH 3.3 with low salt. The addition of salt at low pH induces reassociation but to a range of oligomers rather than a unique trimer structure. This acid-induced formation of an alpha-helical monomer of TNF-alpha may be related to its known interaction with lipid bilayers.

Animals↗

Polymer hollow particles with controllable holes in their surfaces.

Colloidal particles with hollow interiors play important roles in microencapsulation-a process that has found widespread use in applications such as controlled release of drugs, cosmetics, inks, pigments or chemical reagents; protection of biologically active species; and removal of pollutants. The hollow particles are most commonly prepared by coating the surfaces of colloidal templates with thin layers of the desired material (or its precursor), followed by selective removal of the templates by means of calcination or chemical etching. This simple and straightforward approach works for a variety of materials that include polymers, ceramics, composites and metals. For polymers, methods such as emulsion polymerization, phase separation, crosslinking of micelles and self-assembly have also been demonstrated for generating hollow structures. However, diffusion through these closed shells with pores <10 nm is often a slow process. To solve this problem, macroporous capsules have been fabricated by organizing colloids around liquid droplets to form colloidosomes or by controlling the mixing of liquid droplets. Here we report the preparation of another class of macroporous capsules-polymer shells with controllable holes in their surfaces. After loading of functional materials, the holes can be closed by means of thermal annealing or solvent treatment.

Biocompatible Materials↗

Controlling the heat flow: now it is possible.

We discuss the problem of heat conduction in 1D nonlinear chains in relation to the dynamical properties of the system. We provide convincing numerical evidence for the validity of Fourier law of heat conduction in linear mixing systems. Therefore, deterministic diffusion and normal heat transport which are usually associated with full hyperbolicity, actually take place in systems without exponential instability. We then show that, acting on the parameter which controls the strength of the on site potential inside a segment of the chain, we induce a transition from conducting to insulating behavior in the whole system. The control of heat conduction by nonlinearity opens the possibility to propose new devices such as a thermal rectifier.

Computers↗

[The effect of microstructure on the desulphurization of absorbents].

The microstructure and the pore size distribution of 3 kinds of shell and 1 kind of limestone were measured with electronic scanning microscope and pore master mercury porosimeter, and the desulphurization characteristics of above absorbents were studied with thermal-gravimetric analyzer. As a result, the grains of calcium from shell like tortuous flakes, with pore diameter above 0.2 micron and higher pore volume, while the grains from limestone like particles, with pore diameter between 0.01 to 0.16 micron and lower pore volume, but the surface area were very high. The bigger pore which was above 0.2 micron in shell had many advantages, such as fewer air-blocked pores, lower gas diffusing resistance, almost simultaneous and completed reaction. So, finally the calcium conversation ratio of the shell was greater than that of the limestone. On the other hand, while the gas diffusion was meted, it was effective for desulphurization to reduce the pore size and to increase the surface area.

Calcium Carbonate↗

Light distributions in a port wine stain model containing multiple cylindrical and curved blood vessels.

BACKGROUND AND OBJECTIVES: Knowledge of the light distribution in skin tissue is important for the understanding, prediction, and improvement of the clinical results in laser treatment of port wine stains (PWS). The objective of this study is to improve modelling of PWS treated by laser using an improved and more realistic PWS model. STUDY DESIGN/MATERIALS AND METHODS: Light distributions are calculated by the Monte Carlo method for various PWS blood vessel configurations, such as single and multiple vessels oriented horizontally, curved vessels, and "vertically" oriented vessels. Various vessel sizes and wavelengths are used. RESULTS: Our modelling confirms the concept of selective photothermolysis; 577nm laser light gives maximal deposited energy at the top side of the blood vessels closest to the skin surface and 585nm gives a more uniform energy distribution in the vessel. In the distribution of deposited energy multiple vessels mutually influence each other, because of "shadowing" of diffuse light. CONCLUSION: Modelling PWS laser treatments with multiple vessels confirms the need for successive treatments of vessels layer by layer. The use of different wavelengths affects the local deposited energy profiles in the blood vessels. It predicts that the significance of 585nm laser light lies in the uniform energy distribution in the vessels rather than in gain in energy deposition with depth. The calculated light distributions provide a more realistic input for modelling thermal damage effects in PWS laser treatment and modelling of the epidermal response in thermal imaging of the PWS blood vessel structure.

Blood Vessels↗

Estimating distributions of endogenous and exogenous Pb in soils by using Pb isotopic ratios.

Metal contamination of soils by diffuse atmospheric deposition is a worldwide phenomenon. The assessment of incorporation of exogenous metal contaminants in soils is of major environmental importance. Once entering in the soil's biogeochemical cycling, specific pedogenetic soil processes govern metal distribution patterns with depth. In this paper, we attempt to estimate the distribution of endogenous and exogenous Pb in two soils with contrasting pedogenesis, both representative of undisturbed ecosystems. Pb isotope analyses were performed using high-precision thermal ionization mass spectrometry. Endogenous and exogenous Pb concentrations and exogenous 206Pb/207Pb ratios of the samples were calculated using bulk Pb and Sc concentrations and bulk 206Pb/207Pb ratios. Endogenous Pb distribution was in agreementwith dominant soil characteristics, almost constant in the young Andosol and with a clear minimum and maximum in the eluvial and illuvial horizons of the Podzol. The distribution of exogenous Pb was closely related to that of organic C in both soils. Exogenous Pb was evidenced in significant amounts at depth. Using moderate dispersive particle-size fractionation allowed us to evidence the presence of exogenous Pb in functional soil compartments and to highlight preferential distributions of Pb, according to pedology.

Algorithms↗

Thermally reversible in situ gelling carbamazepine liquid suppository.

Carbamazepine (CBZ), indicated for the control of epilepsy, undergoes extensive hepatic first-pass elimination after oral administration. A rectal dosage form of CBZ is not commercially available, although it is of particular interest when oral administration is impossible. Conventional suppositories can cause patient discomfort and may reach the end of the colon; consequently, the drug can undergo the first-pass effect. Mucoadhesive liquid suppositories of CBZ were prepared by adding carbopol to formulation of thermally gelling suppositories that contain 20% poloxamer 407 and either 15% poloxamer 188 or 1% methylcellulose. Gellan gum was also tried instead of 20% poloxamer. All formulations contained 10% CBZ. The characteristics of the suppositories differed depending on the formulation. The formula containing 20% poloxamer 407, 1% methylcellulose, and 0.5% carbopol showed reasonable gelation temperature, gel strength and bioadhesive force. The analysis of release mechanism showed that CBZ released from the suppositories by Fickian diffusion. In vivo evaluation of the same formulation showed higher peak plasma concentration of CBZ compared with the orally administered suspension containing the equivalent amount of drug. However, there was no statistical significant difference (p > 0.05) in extent of bioavailability between the liquid suppository and oral suspension as indicated by the values of AUC(0 - infinity), 17.9 and 18.8 micro g x h/ml, respectively. These results suggested that mucoadhesive in situ gelling liquid suppository could be an effective and convenient delivery system of carbamazepine.

Acrylic Resins↗