Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Thermal Diffusion”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93Linked to original sources

New starch-based thermoplastic hydrogels for use as bone cements or drug-delivery carriers.

The development of new biodegradable hydrogels, based on corn starch/cellulose acetate blends, produced by free-radical polymerization with methyl methacrylate monomer (MMA) and/or an acrylic acid monomer (AA), is reported. The polymerization was initiated by a redox system consisting of a benzoyl peroxide and 4-dimethlyaminobenzyl alcohol at low temperature. These hydrogels may constitute an alternative to the materials currently used as bone cements or drug-delivery carriers. Swelling studies were carried out, as a function of pH and temperature, in buffered solutions. The xerogels were further characterized by Fourier transform-infrared spectroscopy. Tensile and compression tests, and dynamic mechanical thermal analysis were used to assess the mechanical performance of the developed materials. The fracture surfaces were observed by scanning electron microscopy. The developed materials are sensitive to the pH, showing a clear reversible transition in a relatively narrow interval of pH, which is just in the range of physiological conditions. These properties make the materials developed in this study very promising for biomedical applications. Fickian-type diffusion is the mechanism predominant in these systems, except for the composition with a higher concentration of AA, that corresponds to the most desirable kinetical behavior for controlled release (case II-transport mechanism). Furthermore, the results obtained in the mechanical tests are in the range of those reported for typical PMMA bone cements, showing that it is possible to develop partially degradable cements with an adequate mechanical behavior.

Journal Article↗

Blood-brain barrier permeation: molecular parameters governing passive diffusion.

53 compounds with clinically established ability to cross or not to cross the blood-brain barrier by passive diffusion were characterized by means of surface activity measurements in terms of three parameters, i.e., the air-water partition coefficient, Kaw, the critical micelle concentration, CMCD, and the cross-sectional area, AD. A three-dimensional plot in which the surface area, AD, is plotted as a function of K-1aw and CMCD shows essentially three groups of compounds: (i) very hydrophobic compounds with large air-water partition coefficients and large cross-sectional areas, AD > 80 A2 which do not cross the blood-brain barrier, (ii) compounds with lower air-water partition coefficients and an average cross-sectional area, AD congruent with 50 A2 which easily cross the blood-brain barrier, and (iii) hydrophilic compounds with low air-water partition coefficients (AD < 50 A2) which cross the blood-brain barrier only if applied at high concentrations. It was shown that the lipid membrane-water partition coefficient, Klw, measured previously, can be correlated with the air-water partition coefficient if the additional work against the internal lateral bilayer pressure, pibi = 34 +/- 4 mN/m is taken into account. The partitioning into anisotropic lipid membranes decreases exponentially with increasing cross-sectional areas, AD, according to Klw = const. Kaw exp(-ADpibi/kT) where kT is the thermal energy. The cross-sectional area of the molecule oriented at a hydrophilic-hydrophobic interface is thus the main determinant for membrane permeation provided the molecule is surface active and has a pKa > 4 for acids and a pKa < 10 for bases.

ATP Binding Cassette Transporter, Subfamily B, Mem↗

Protegrin-1 enhances bacterial killing in thermally injured skin.

OBJECTIVE: Septic complications and the emergence of drug-resistant microbes represent serious risks to patients. Recently, naturally occurring peptides have been discovered that possess potent and broad-spectrum antimicrobial activity. Protegrin-1 is particularly attractive for clinical use in human wounds because, unlike defensins, protegrin-1 retains broad antimicrobial and antifungal activity at physiologic salt concentration and in the presence of serum. The objective of this study was to examine the efficacy of protegrin-1 in killing multiple drug-resistant microbes isolated from human burn patients. DESIGN: For thein vitroexperiment, bilayer radial diffusion was performed comparing standard antibiotics with protegrin-1 on multiple-drug-resistant microbial organisms isolated from infected burn wounds. In vivo, rats received a 20% total body surface area partial-thickness burn by immersion in 60 degrees C water for 20 secs followed by wound seeding with 106 colony forming units of Silvadene-resistant Pseudomonas aeruginosa. SETTING: University of Michigan research laboratory. SUBJECTS: Adult, male Sprague-Dawley rats. INTERVENTIONS: Rats were randomized into three groups: those receiving synthetic protegrin-1, acetic acid (carrier), or gentamicin (positive control). Protegrin-1 was administered by topical application or intradermal injection. Wound tissues were harvested aseptically at different time points for quantitative bacterial counts. MEASUREMENTS AND MAIN RESULTS: In vivo and in vitro experiments revealed rapid and significant decreases in bacterial counts for protegrin-1-treated groups compared with controls. CONCLUSIONS: This study shows that protegrin-1 potentially may be used as an alternative or adjunct therapy to standard agents used to treat wound infections.

Administration, Topical↗

Hydrophilic acrylic biomaterials derived from vitamin E with antioxidant properties.

Hydrogels based on polymeric derivatives of vitamin E for biomedical purposes have been prepared by copolymerization reaction of the alpha-tocopheryl methacrylate (V) with 2-hydroxyethyl methacrylate (H) in a range of composition between 5-20 wt % of V. The swelling behavior of the hydrogels in water, alkaline, and acidic media showed a slight decrease in the equilibrium water content with the content of V in the copolymer although in all cases it was superior to an EWC > 20%. The diffusion mechanism followed a Fickian behavior in all media. The values of the diffusion coefficients were in the range 2.5-1.6 10(-7) cm2/s. The states of water in the hydrogels were determined by DSC. A decrease in the content of freezing water was obtained with the V content for all media, and for all compositions lower values of freezing water were obtained in acidic or basic pHs than in distilled water. The copolymeric xerogels, analyzed by contact angle measurements, deviated from those expected taking into consideration those of the homopolymers and the average fraction of the monomers in the copolymer. The polar contribution dropped with the introduction of a small content (4 wt %) of the vitamin E-containing monomer, and it reached a value similar to that of poly-V for a composition of 49 wt % of V in the copolymer. This behavior is accounted for by the segregation of the macromolecular chains of both kinds of monomers, due mainly to differences in their polarity, molecular weights, and the reactivity of both monomers. Finally, thermogravimetric analysis showed a higher thermal (antioxidant) stability of the poly-V with respect to poly-H, giving rise to a residue of 18 wt %. The V-containing copolymers also showed an improved stability (antioxidant behavior), indicating the possibility of the V unit's interfering with the oxidative process, based on free-radical species, and, therefore, with the aging process at the cellular level.

Algorithms↗

Effect of transglutaminase on reconstruction and physicochemical properties of collagen gel from shark type I collagen.

The effects of microbial transglutaminase (MTGase) on type I collagen self-assembly and properties of reconstructed collagen fibrils from shark were investigated. Collagen self-assembly was accelerated with the addition of MTGase in dependence on that concentration. The relative amount of reconstructed collagen slightly decreased with MTGase. The diffusion coefficient of collagen gel was reduced by treatment with MTGase, and that suggested the reduction of mobility of the whole collagen network. At a high temperature, used to denature the collagen, MTGase-treated collagen gel remained as aggregates. By differential scanning calorimetry, the denaturation temperature of MTGase-treated collagen gel was about 2 degrees C higher than that of nontreated collagen gel. Treatment with MTGase yielded thermally stable cross-links in collagen molecules.

Animals↗

Temperature- and species-dependent quenching of NO A 2Sigma+(v'=0) probed by two-photon laser-induced fluorescence using a picosecond laser.

We report improved measurements of the temperature-dependent cross sections for the quenching of fluorescence from the A 2Sigma+(v'=0) state of NO. Cross sections were measured for gas temperatures ranging from 294 to 1300 K for quenching by NO(X (2)Pi), H(2)O, CO(2), O(2), CO, N(2), and C(2)H(2). The A 2Sigma+(v'=0) state was populated via two-photon excitation with a picosecond laser at 454 nm, and the decay rate of the fluorescence originating from A 2Sigma+(v'=0) was measured directly. Thermally averaged quenching cross sections were determined from the dependence of the fluorescence decay rate on the quencher gas pressure. Our measurements are compared to previous measurements and models of the quenching cross sections, and new empirical fits to the data are presented. Our new cross-section data enable predictions in excellent agreement with prior measurements of the fluorescence lifetime in an atmospheric-pressure methane-air diffusion flame. The agreement resolves discrepancies between the lifetime measurements and predictions based on the previous quenching models, primarily through improved models for the quenching by H(2)O, CO(2), and O(2) at temperatures less than 1300 K.

Journal Article↗

Multiscale lattice Boltzmann schemes for low Mach number flows.

A low Mach number approximation (LMNA) of the Navier-Stokes equations is widely used in numerical methods for the simulation of low-speed thermal and athermal flows. The advanced lattice Boltzmann approach (Bhatnagar-Gross-Krook) for the solution of the LMNA equations is discussed and its performance is compared with the performance of the commercial CFD code FLUENT 5.

Colloids↗

Thermal effects in laser-assisted pre-embryo zona drilling.

Diode lasers [lambda=1480 nm] are used with in vitro fertilization to dissect the zona pellucida (shell) of pre-embryos. A focused laser beam is applied in vitro to form a channel or trench in the zona pellucida. The procedure is used to facilitate biopsy or as a promoter of embryo hatching. We present examples and measurements of zona pellucida ablation using animal models. In using the laser it is vital not to damage pre-embryo cells, e.g., by overheating. In order to define safe regimes we have derived some thermal side effects of zona pellucida removal. The temperature profile in the beam and vicinity is predicted as function of laser pulse duration and power. In a crossed-beam experiment a HeNe laser probe is used to detect the temperature-induced change in the refractive index of an aqueous solution, and estimate local thermal gradient. We find that the diode laser beam produces superheated water approaching 200 degrees C on the beam axis. Thermal histories during and following the laser pulse are given for regions in the neighborhood of the beam. We conclude that an optimum regime exists with pulse duration < or =5 ms and laser power approximately 100 mW.

Animals↗

Transport lattice models of heat transport in skin with spatially heterogeneous, temperature-dependent perfusion.

BACKGROUND: Investigation of bioheat transfer problems requires the evaluation of temporal and spatial distributions of temperature. This class of problems has been traditionally addressed using the Pennes bioheat equation. Transport of heat by conduction, and by temperature-dependent, spatially heterogeneous blood perfusion is modeled here using a transport lattice approach. METHODS: We represent heat transport processes by using a lattice that represents the Pennes bioheat equation in perfused tissues, and diffusion in nonperfused regions. The three layer skin model has a nonperfused viable epidermis, and deeper regions of dermis and subcutaneous tissue with perfusion that is constant or temperature-dependent. Two cases are considered: (1) surface contact heating and (2) spatially distributed heating. The model is relevant to the prediction of the transient and steady state temperature rise for different methods of power deposition within the skin. Accumulated thermal damage is estimated by using an Arrhenius type rate equation at locations where viable tissue temperature exceeds 42 degrees C. Prediction of spatial temperature distributions is also illustrated with a two-dimensional model of skin created from a histological image. RESULTS: The transport lattice approach was validated by comparison with an analytical solution for a slab with homogeneous thermal properties and spatially distributed uniform sink held at constant temperatures at the ends. For typical transcutaneous blood gas sensing conditions the estimated damage is small, even with prolonged skin contact to a 45 degrees C surface. Spatial heterogeneity in skin thermal properties leads to a non-uniform temperature distribution during a 10 GHz electromagnetic field exposure. A realistic two-dimensional model of the skin shows that tissue heterogeneity does not lead to a significant local temperature increase when heated by a hot wire tip. CONCLUSIONS: The heat transport system model of the skin was solved by exploiting the mathematical analogy between local thermal models and local electrical (charge transport) models, thereby allowing robust, circuit simulation software to obtain solutions to Kirchhoff's laws for the system model. Transport lattices allow systematic introduction of realistic geometry and spatially heterogeneous heat transport mechanisms. Local representations for both simple, passive functions and more complex local models can be easily and intuitively included into the system model of a tissue.

Blood Flow Velocity↗

Characterization of compression-molded UHMWPE, PMMA and PMMA/MMA treated UHMWPE: density measurement, FTIR-ATR, and DSC.

Considered one of the weak links in the total hip replacement (THR), efforts to enhance the interfacial strength between bone cement and ultra-high molecular weight polyethylene (UHMWPE) acetabular cup had been conducted in this laboratory. Following the successful demonstration of high interfacial strengths for our new acetabular component design, the nature of physical, chemical, and thermal property of the compression-molded specimens, including UHMWPE, PMMA/MMA treated UHMWPE, and PMMA has been investigated in this study. Density results from a density gradient column showed that the molding processes and conditions were adequate for complete sintering of UHMWPE and PMMA powders. FTIR-ATR results gave a direct evidence that PMMA did exist in the PMMA/MMA treated UHMWPE matrix. It also revealed a clear diffusion-related behavior across the interface. Under the high temperature and pressure, the UHMWPE powders undergo drastic changes of their morphology and crystalline structures. These changes were examined by differential scanning calorimeter (DSC) which showed a large difference in terms of % crystallinity. The percent of PMMA deposited in the treated UHMWPE was 17.8%, 18.8%, and 24.3% from the analyses of density, FTIR-ATR, and DSC, respectively. Finally, an evidence of diffusive behavior at the interface exhibited diffusion of PMMA occurring across the interfaces between the treated UHMWPE and UHMWPE or PMMA.

Bone Cements↗

Dynamic moisture permeation through clothing.

Dynamic moisture permeation through clothing often occurs during thermal transience, causing an imbalance between evaporative heat loss from the skin (Esk) and that from the clothing surface (Ecl). A device was designed to observe Esk and Ecl simultaneously. It consists of two relative humidity sensors coupled with thermistors so that densities of water vapor at two points within the boundary layer can be calculated. The rate of local evaporation is then estimated from Fick's law of diffusion. Local evaporation rates from the skin and clothing surface at the chest, arm, and thigh were measured during exposure to controlled ambient temperatures varying from 20 degrees-40 degrees C. The subjects wore four different types of helicopter pilot suits: Nomex/Neoprene, Goretex, cotton ventile, and Nomex/Insulite. For the Goretex and cotton ventile suits, consisting of relatively permeable and hygroscopic fabrics, a sudden increase in Esk, exponential decay of Esk, and a gradual increase in Ecl were observed. These appear to be associated with, respectively, the onset of sweat secretion, moisture build-up within the clothing, and water gain in the fabric. Thus, the device may be useful for observing dynamic moisture permeation through clothing.

Adult↗

Thermally polarized (1)H NMR microimaging studies of liquid and gas flow in monolithic catalysts

The feasibility of gas flow imaging in moderately high magnetic fields employing thermally polarized gases at atmospheric pressures is demonstrated experimentally. Two-dimensional spatial maps of flow velocity distributions for acetylene, propane, and butane flowing along the transport channels of shaped monolithic alumina catalysts were obtained at 7 T by (1)H NMR, with true in-plane resolution of 400 &mgr;m and reasonable detection times. The resolution is shown to be limited by the echo attenuation due to rapid molecular diffusion in the imaging gradients of magnetic field. All gas flow images exhibit flow patterns that are not fully developed, in agreement with the range of Reynolds numbers (190-570) and the length of the sample used in gas flow experiments. The flow maps reveal the highly nonuniform spatial distribution of shear rates within the monolith channels of square cross-section, the kind of information essential for evaluation and improvement of the efficiency of mass transfer in shaped catalysts. The water flow images were obtained at lower Re numbers for comparison. These images demonstrate the transformation of a transient flow pattern observed closer to the inflow edge of a monolith into a fully developed one further downstream. Copyright 2000 Academic Press.

Journal Article↗

Characterization of cellulosic hot-melt extruded films containing lidocaine.

Hot-melt extrusion technology was used to produce thin films containing a model drug, lidocaine, and the cellulosic polymers hydroxypropyl cellulose (HPC) and hydroxypropyl methyl cellulose (HPMC). Two film formulations were extruded and compared, one containing only HPC and the other containing HPC:HPMC (80:20). Thermal analysis of the films using differential scanning calorimetry (DSC) suggested that the drug existed in the amorphous condition, which was confirmed by wide angle X-ray diffractometry. Sustained release of the drug was observed from both of the polymer matrices. Dissolution profiles suggested that HPMC retarded the drug release from HPC:HPMC (80:20) films. However, the mechanism of drug release from both of the films was predominantly diffusion of the drug through the polymer matrices. Incorporation of HPMC also increased both adhesive strength and work of adhesion as compared to the HPC-only films.

Cellulose↗

Noise-induced dephasing of an ac-driven Josephson junction.

We consider the phase-locked dynamics of a Josephson junction driven by finite-spectral-linewidth ac current. By means of a transformation, the effect of frequency fluctuations is reduced to an effective additive noise, the corresponding (large) dephasing time being determined, in the logarithmic approximation, by the Kramers expression for the lifetime. For sufficiently small values of the drive's amplitude, direct numerical simulations show agreement of the dependence of the dephasing activation energy on the ac drive's spectral linewidth and amplitude with analytical predictions. Solving the corresponding Fokker-Planck equation analytically, we find a universal dependence of the critical value of the effective phase-diffusion parameter on the drive's amplitude at the point of sharp transition from the phase-locked state to an unlocked one. However, for large values of the drive amplitude, saturation and subsequent decrease of the activation energy are revealed by simulations, which cannot be accounted for by the perturbative analysis. The same effect is found for a previously studied case of ac-driven Josephson junctions with intrinsic thermal noise. The predicted effects are relevant to applications to voltage standards, as they determine the stability of the Josephson phase-locked state.

Journal Article↗

Photosynthetic responses of leaves to water stress, expressed by photoacoustics and related methods : I. Probing the photoacoustic method as an indicator for water stress in vivo.

The effect of leaf desiccation on the photosynthetic activities in vivo was probed by the photoacoustic method. The aim of this research was: (a) To study the photoacoustic signal per se in varied conditions in order to develop this tool as a probe for stress conditions in vivo. (b) To obtain results pertaining to electron transport activities in vivo, and confirm conclusions based on work with isolated chloroplasts, which could otherwise be the result of nonspecific damage occurring during their isolation. Leaf discs from tobacco (Nicotiana tabacum L.) were routinely used, with other species tested also for comparison. Rapid leaf desiccation caused changes in the low frequency photoacoustic signal, attributed both to the mechanism of signal transduction, influenced by changes in the structural parameters of the leaf, and to the direct (nonstomatal) inhibition of gross photosynthesis. The dependence of the photothermal part of the signal on the frequency indicated the presence of two photothermal components, one of which persisted only at low modulation frequencies (below about 100 Hz) and which largely increased with the desiccation treatment. This component was ascribed to a thermal wave which reaches the leaf surface. The other nonvariable photothermal component was ascribed to a thermal wave propagating from the chloroplasts to the surface of the mesophyll cell. Only this component is considered in the ratio of the O(2) signal to the photothermal signal, which is used to estimate the quantum yield of photosynthesis. The specific dependence of the latter ratio on the frequency yielded a comparative quantum yield parameter from its extrapolation to zero frequency, and also indicated stress induced changes in the diffusion of O(2) through the mesophyll cell, reflected by changes in its characteristic slope. The (zero frequency extrapolated) quantum yield was markedly reduced with the progression of the water stress, indicating the inhibition of (gross) phototosynthetic electron transport in vivo. This result was expressed even more emphatically by the stronger inhibition of the photochemical energy storage, obtained by photoacoustic measurements at a high modulation frequency.

Journal Article↗

[Catalytic and immunochemical properties of ferritin conjugates with horseradish peroxidase].

The human spleen ferritin--horseradish peroxidase conjugate (HRP--Fer) was synthesized by periodate oxidation of the enzyme carbohydrate fragment. The protein fraction containing 1-2 peroxidase molecules and characterized by kinetic homogeneity was obtained in the peroxidatic ortho-dianisidine (o-DA) oxidation reaction. Gel diffusion precipitation of HRP--Fer with peroxidases and ferritin antibodies was carried out. The precipitation confirms the retention by peroxidase and ferritin of their antigenic properties. The kinetics of peroxidatic oxidation of o-DA by the HRP--Fer conjugate was studied within the temperature interval of 15-37 degrees C. The value of catalytic constant for this reaction exceeds that for native peroxidase 1.75-fold. A kinetic analysis of thermal inactivation of peroxidase and its conjugate was performed within the temperature range of 40-65 degrees C. The effective rate constants of inactivation obtained from the first order equation are higher for HRP--Fer than for the native enzyme. The effect of pH on the rates of inactivation of HRP--Fer and the non-modified enzyme was studied at 50 degrees C. The enzyme and its conjugate were shown to stabilize in acid media. The HRP--Fer conjugate can be used as an effective tool in immunoenzymatic assays of ferritin.

Catalysis↗

Thermogravimetric study of thermal decontamination of soils polluted by hexachlorobenzene, 4-chlorobiphenyl, naphthalene, or n-decane.

To determine decontamination behavior as affected by temperature, shallow beds of a clay-rich, a calcerous, and a sedimentary soil, artificially polluted with hexachlorobenzene, 4-chlorobiphenyl, naphthalene, or n-decane, were separately heated at 5 degrees C min-1 in a thermogravimetric analyzer. Temperatures for deep cleaning of the calcerous and the sedimentary soil increased with increasing boiling point (bp) of the aromatic contaminants, but removal efficiencies still approached 100% well below the bp. Decontamination rates were therefore modelled according to a pollutant evaporation-diffusion transport model. For the calcerous and sedimentary soils, this model reasonably correlated removal of roughly the first 2/3 of the naphthalene, but gave only fair predictions for hexachlorobenzene and 4-chlorobiphenyl. It was necessary to heat the clay soil above the aromatics bp to achieve high decontamination efficiencies. Weight loss data imply that for temperatures from near ambient to as much as 150 degrees C, interactions of each aromatic with the clay soil, or its decomposition products, result in lower net volatilization of the contaminated vs. neat clay. A similar effect was observed in heating calcerous soil polluted with hexachlorobenzene from near ambient to about 140 degrees C. Decontamination mechanisms remain to be established, although the higher temperatures needed to remove aromatics from the clay may reflect a more prominent role for surface desorption than evaporation. This would be consistent with our estimates that the clay can accommodate all of the initial pollutant loadings within a single surface monolayer, whereas the calcerous and sedimentary soils cannot.

Alkanes↗

[Relationship between thermal treatment of milk and hysteresis of the milk protein system. II. Studies on casein micelles (author's transl)].

The association of colloidal calcium phosphate with the casein micelles is the principal reason for hysteresis of the milk protein system. Because of this association the secondary calcium phosphate cannot be titrated at its pK = 7.2, but only at lower pH values depending on the previous thermal treatment of the milk. However after overcoming certain energy barriers it can be titrated (between pH 5.8 and 5.2), but then calcium phosphate is separated irreversibly from the micelles. Therefore in the subsequent base titration other molecular conditions are passed through than in acid titration. The consequence is a hysteresislike titration curve. By heating, the surface of the micelles are covered successively with serum proteins. Due to this coating additional diffusion barriers are constructed. The diffusion of the protons into the interior of the micelles is measurably retarded. The expansion of the hysteresis loop can be determined quantitatively.

Animals↗