Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Compressive Strength”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90Linked to original sources
PubMed2005

Association of body composition and physical activity with proximal femur geometry in middle-aged and elderly Afro-Caribbean men: the Tobago bone health study.

Osteoporotic fractures are less prevalent in African Americans than in caucasians, possibly because of differences in bone structural strength. Bone structural adaptation can be attributed to changes in load, crudely measured as lean and fat mass throughout life. The purpose of this analysis was to describe the associations of leg lean mass, total body fat mass, and hours walked per week with femoral bone mineral density (BMD) and bone geometry in a cross-sectional sample of 1,748 men of African descent between the ages of 40 and 79 years. BMD, section modulus (Z), cross-sectional area (CSA), and subperiosteal width were measured from dual energy X-ray absortiometry (DXA) scans using the hip structural analysis (HSA) program. Multiple linear regression models explained 35% to 48% of the variance in bending (Z) and axial (CSA) strength at the femoral neck and shaft. Independent of all covariates including total body fat mass, one standard deviation increase in leg lean mass was significantly associated with a 5% to 8% higher Z, CSA, and BMD (P < 0.010) at the neck and shaft. The number of hours walked per week was not a strong or consistent independent predictor of bone geometry or BMD. We have shown that weight is the strongest independent predictor of femur BMD and geometric strength although the effect appears to be mediated by lean mass since leg lean mass fraction and total body fat mass fraction had significant and opposing effects at the narrow neck and shaft in this group of middle aged and elderly men.

Absorptiometry, Photon↗
PubMed1998

Volumetric properties of nucleic acids.

Volumetric studies can yield useful new information on a myriad of intra- and intermolecular interactions that stabilize nucleic acid structures. In particular, appropriately designed volumetric measurements can characterize the conformation-dependent hydration properties of nucleic acids as a function of solution conditions, including temperature, pressure, ionic strength, pH, and cosolvent concentration. We have started to accumulate a substantial database on volumetric properties of DNA and RNA, as well as on related low molecular weight model compounds. This database already has provided unique insights into the molecular origins of various nucleic acid recognition processes, including helix-to-coil and helix-to-helix conformational transitions, as well as drug-DNA interactions. In this article, we review recent progress in volumetric investigations of nucleic acids, emphasizing how these data can be used to gain insight into intra-and intermolecular interactions, including hydration properties. Throughout this review, we underscore the importance of volume and compressibility data for characterizing the hydration properties of nucleic acids and their constituents. We also describe how such volumetric data can be interpreted at the molecular level to yield a better understanding of the role that hydration can play in modulating the stability and recognition of nucleic acids.

Animals↗
PubMed2006

The influence of material property and morphological parameters on specimen-specific finite element models of porcine vertebral bodies.

The use of finite element (FE) methods in spinal research is increasing, but there is only limited information available on the influence of different input parameters on the model predictions. The aim of this study was to investigate the role of these parameters in FE models of the vertebral body. Experimental tests were undertaken on porcine lumbar vertebral bodies and scans of the specimens were used to create specimen-specific FE models. Three models were created for each specimen with combinations of generic and specimen-specific parameters. Stiffness and strength predictions were also made directly from the specimen trabecular bone volume fraction (BVF) and cross-sectional area (CSA). The agreement between the experimental results and the FE models with generic morphology was poorer (concordance coefficients = 0.058, 0.125 for stiffness, strength) than those made from the BVF and CSA (concordance coefficients = 0.638, 0.609). The greatest levels of agreement were found with the morphologically specific models including element-specific material properties (concordance coefficients = 0.881, 0.752). This indicates that highly specific models, both in terms of morphology and bone quality, are necessary if the FE tool is to be used effectively for spinal research and clinical practice.

Animals↗
PubMed2002

New tubular bioabsorbable knitted airway stent: biocompatibility and mechanical strength.

OBJECTIVE: This study examines the biocompatibility and suitability of a new tubular bioabsorbable knitted stent made of poly-L -lactic acid in normal rabbit airways and examines the mechanical strength of this stent in vitro. METHODS: A tubular knitted airway stent (group B, n = 15) made of poly-L -lactic acid wire was implanted operatively in New Zealand White rabbits intratracheally; silicone stents served as controls (group A, n = 8). The cervical trachea was exposed, and the stent was implanted. Up to 40 weeks after stent implantation, the rabbits were killed, at which time bronchoscopy, histologic examination, and scanning electron microscopic study was done. We tested poly-L -lactic acid stents and silicone stents for their mechanical strength in vitro. We subjected stents to area loads and measured their mechanical strengths. RESULTS: In group A, which received silicone stents, 3 (37.5%) rabbits died within 4 weeks of stent implantation as a result of airway obstruction by secretions inside the stent lumen. In group B, poly-L -lactic acid stents, 1 (6.7%) rabbit died 3 weeks after implantation because of weakness caused by anorexia. In the remaining animals, except for 1 animal with stent trouble, the bronchial lumen was fully open until the 40th week after implantation. After 40 weeks of follow-up, the stents disappeared, except for nonabsorbable suture in the bronchial wall. None of the animals in group B died of airway complication. Histologic examination and scanning electron microscopic examination of the group A silicone stents showed marked regression of ciliated cells under the stent. In group B the ciliated epithelium was preserved, and there were numerous capillary blood vessels in the submucosa. In scanning electron microscopy of the group B poly-L -lactic acid stents, the ciliated cells were preserved between the mesh holes of the stent. For diameters between 4 and 6 mm, the mechanical strength of silicone stents was greater than that of poly-L -lactic acid stents. However, the mechanical strength of poly-L -lactic acid stents increased as a function of their diameter. CONCLUSION: A new tubular bioabsorbable stent made of poly-L -lactic acid is biocompatible in normal rabbit airways, indicating that poly-L -lactic acid is a promising material for airway stents for clinical use.

Absorbable Implants↗
PubMed2005

Jump-land characteristics and muscle strength development in young athletes: a gender comparison of 1140 athletes 9 to 17 years of age.

BACKGROUND: Many authors have speculated that altered neuromuscular control and strength of the lower extremity are responsible for the gender disparity in knee ligament injury rates. HYPOTHESIS: Significant increases in normalized quadriceps and hamstrings strength and limb symmetry on single-legged hop test occur with age. No gender differences in strength occur until age 14 years, after which boys generate greater peak torques than do girls. Age and gender do not influence lower limb alignment on a drop-jump test. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: We studied the effects of age and gender in 1140 athletes, 9 to 17 years old, on muscle strength and neuromuscular control during functional activities. Isokinetic quadriceps and hamstrings strength was measured at 300 deg/s. Limb symmetry was assessed with single-legged hop tests. A video drop-jump test determined lower limb alignment in the coronal plane. RESULTS: Extension peak torques significantly increased with age; maximum strength was noted in girls at age 13 years and in boys at age 14 years (P < .001). Although maximum flexion strength occurred in boys at age 14 years (P < .001), girls had only slight increases from ages 9 to 11 years (P = not significant). Boys aged 14 to 17 years had significantly greater normalized isokinetic strength than did age-matched girls. No age or gender effects existed in limb alignment on the drop-jump test or limb symmetry on single-legged hop testing. CONCLUSION: Maximum hamstrings strength was noted in female athletes by age 11 years, compared with age 14 years in male athletes, and a distinct lower limb valgus alignment existed in the majority of all athletes on landing. The absence of a gender difference in lower limb alignment on landing suggests other factors may be responsible for the gender disparity in knee ligament injury rates.

Adolescent↗
PubMed2000

Three-dimensional finite element analyses of four designs of a high-strength silicon nitride implant.

The effects of implant shape and size on the stress distribution around high-strength silicon nitride implants under vertical and oblique forces were determined using a three-dimensional finite element analysis. Finite element models were designed using as a basis the serial sections of the mandible. Using Auto-CAD software, the model simulated the placement of implants in the molar region of the left mandible. Results of the analyses demonstrated that mainly the implant root shape and the directions of bite forces influence the stress distributions in the supporting bone around each implant. Implant size is a lesser factor. The serrated implants presented a larger surface area to the bone than either the cylindrical or tapered implants, which resulted in lower compressive stress around the serrated implants. With increasing implant diameter and length, compressive stress decreased. The mean compressive stress distribution on the serrated implants was more flat (platykurtic) than on either the cylindrical or tapered implants. Results of studies on two load directions (vertical and oblique) showed that, in either case, the compressive stress in the cortical bone around the neck of the implant was higher than in the cancellous bone along the length of the implant. The most extreme principal compressive stress was found with oblique force. This study provides the first information on the relationship between shape of the silicon nitride implant and stress on the supporting bone.

Alveolar Process↗
PubMed2003

Risk factors for osteoporosis in men.

We evaluated the risk factors for osteoporosis in men. The subjects of this study consisted of 686 healthy middle-aged (40-59 years) men who had undergone bone mineral density (BMD) measurement and medical examination, including physical strength. BMD of L2-4 was measured at the anterior-posterior position, using dual X-ray absorptiometry. Physical investigations, such as height, weight, and physical strength, were carried out on the examination day. Details of tobacco and alcohol consumption, exercise, and food intake were described on a questionnaire completed by the subjects. Sixty-five (9.5%) of the 686 subjects had a BMD less than 2.5 SD below the peak bone mass (PBM), 182 (26.5%) had a BMD between 1 SD and 2.5 SD below the PBM; and 439 (64.0%) had a BMD no less than 1 SD below the PBM. Body mass index (BMI) and leg strength were significant positive determinants of BMD, and smoking was a significant negative determinant on multiple regression analysis, with a coefficient of determination of 9.5%. Calcium intake, exercise, and alcohol consumption were not significant determinants of BMD. These results suggest that poor lifestyle behaviors (i.e., smoking) accelerate the reduction of bone density.

Absorptiometry, Photon↗
PubMed2005

Collagen-based implants reinforced by chitin fibres in a goat shank bone defect model.

Tissue engineering is an increasingly popular method for repairing bone defects. However, repair of bone defects over 30 mm using tissue-engineering methods is a difficult clinical problem. In this study, we used a goat shank model to evaluate the bone-regenerating efficacy of a novel nano-hydroxyapatite/collagen/PLLA (nHACP) composite reinforced by chitin fibres. Forty adult male goats with 40 mm defects in shank at the same anatomic site were divided into four groups. The first group was the control, where nothing was implanted in the defect (defect group). The other three groups were implanted with porous pure PLLA, nHACP and nHACP reinforced by chitin fibres, respectively. Bone growth in each group was evaluated by radiography, histology, bone mineral density and mechanical strength, once every 5 weeks for 15 weeks. The results indicated that nHACP implants, both with and without chitin fibres, are better for repairing the defects than pure PLLA. However, only the reinforced implants showed nearly perfect recovery in 15 weeks after operation. So, the reinforced scaffold might be a candidate for bone tissue repair.

Animals↗
PubMed2001

A fluoride-releasing composite for dental applications.

OBJECTIVES: The aim of this work was to attempt formulation of a dental composite, for investigational purposes, which will release fluoride at a rate comparable to glass ionomer materials, while retaining physical properties adequate for potential use in a number of dental applications. METHODS: An organic fluoride material, tetrabutylammonium tetrafluoroborate (TBATFB), was incorporated into a hydrophilic monomer system made of 2,2-bis[4-(2-hydroxy-3-methacroyloxypropoxy)phenyl]-propane (BisGMA) and 2-hydroxyethyl methacrylate (HEMA). This fluoride-containing monomer system was filled with silane treated quartz to 81 wt%. The resultant material was tested for fluoride release, physical strength properties and bond strength to enamel, each in comparison to control materials. RESULTS: Cumulative fluoride release from the experimental composite was approximately linear over time and comparable to glass ionomer materials. The long term rate of release exceeded several of the glass ionomer materials tested. Diametral tensile strength was comparable to resin-modified glass ionomer (RMGI) materials. Bond strength to etched enamel was statistically equivalent to a commercially available hybrid composite control. SIGNIFICANCE: The experimental resin-based composite material could potentially be used as an alternative to glass ionomer materials in non-stress bearing restorative applications and for orthodontic bracket bonding, where high fluoride release is desirable.

Acid Etching, Dental↗
PubMed2002

Applications of a resorbable interbody spacer via a posterior lumbar interbody fusion technique.

Polyhydroxyacids are a promising class of bioresorbable materials withpotential applications in spinal surgery. One such polymer, MacroPore (MacroPore Biosurgery Inc, San Diego, Calif), offers a balance of strength, predictable degradation, lack of stimulus of foreign body reaction, and biocompatibility with neural tissue. MacroPore can be formed into an array of shapes and can be manufactured, sterilized, and stored with conventional techniques. Limited clinical experience has been gained with bioresorbable implants that are used as load-sharing devices in a posterior lumbar interbody fusion construct.

Absorbable Implants↗
PubMed2004

A mechanical model for collagen fibril load sharing in peripheral nerve of diabetic and nondiabetic rats.

Peripheral neuropathy affects approximately 50% of the 15 million Americans with diabetes. It has been suggested that mechanical effects related to collagen glycation are related to the permanence of neuropathy. In the present paper, we develop a model for load transfer in a whole nerve, using a simple pressure vessel approximation, in order to assess the significant of stiffening of the collagenous nerve sheath on endoneurial fluid pressure. We also develop a fibril-scale mechanics model for the nerve, to model the straightening of wavy fibrils, producing the toe region observed in nerve tissue, and also to interrogate the effects of interfibrillar crosslinks on the overall properties of the tissue. Such collagen crosslinking has been implicated in complications in diabetic tissues. Our fibril-scale model uses a two-parameter Weibull model for fibril strength, in combination with statistical parameters describing fibril modulus, angle, wave-amplitude, and volume fraction to capture both toe region and failure region behavior of whole rat sciatic nerve. The extrema of equal and local load-sharing assumptions are used to map potential differences in diabetic and nondiabetic tissues. This work may ultimately be useful in differentiating between the responses of normal and heavily crosslinked tissue.

Animals↗
PubMed2006

Inhibin A is an endocrine stimulator of bone mass and strength.

Gonadal function plays a major role in bone homeostasis. It is widely held that the skeletal consequences of hypogonadism are solely due to a loss of sex steroids; however, increases in bone turnover begin during perimenopause before decreases in serum estradiol levels. These data and our demonstration that inhibins acutely regulate bone cell differentiation in vitro led us to test whether inhibin A (InhA) regulates bone mass in vivo. Using a transgenic model of inducible human InhA expression, InhA increased total body bone mineral density, increased bone volume, and improved biomechanical properties at the proximal tibia in intact mice and also prevented the loss of BMD and bone volume and strength associated with gonadectomy at both the spine and proximal tibia. In addition, InhA increased mineral apposition rate, double-labeled surface, and serum osteocalcin levels in vivo and osteoblastogenesis ex vivo without affecting osteoclast number or activity. Together these results demonstrate novel stimulatory effects of InhA on the skeleton in vivo. These studies provide in vivo evidence demonstrating that gonadal factors other than sex steroids play an important role in regulating bone mass and strength and, combined with our previous clinical data, suggest that gonadal InhA may be a component of the normal endocrine repertoire that regulates bone quality in both the axial and appendicular skeleton.

Animals↗
PubMed2006

Biomechanical properties of bone cement with addition of cefuroxime antibiotic.

Antibiotic-loaded bone cement has been used as prophylaxis against infection in total joint replacement surgery. Its effect on the mechanical strength of cement is a major concern as high dose of antibiotic was associated with a significant reduction in mechanical strength of bone cement. However, the cut-off antibiotic that weakens the mechanical strength of cement remains to be determined. This study was undertaken to observe the changes in the mechanical properties of bone cement with gradual increments of Cefuroxime antibiotic. Cefuroxime at different doses: 0, 1.5, 3.0 and 4.5gm were added to a packet of 40gm bone cement (Simplex P) and study samples were prepared by using third generation cementing technique. Mechanical impact, flexural and tensile strength were tested on each sample. Significant impact and tensile strength reduction were observed after addition of 4.5 gm of Cefuroxime. However, flexural strength was significantly reduced at a lower dose of 3.0 gm. The maximum dose of Cefuroxime to be safely added to 40mg Surgical Simplex P is 1.5gm when third generation cementing technique is used. Further study is needed to determine whether it is an effective dose as regards to microbiological parameters.

Anti-Bacterial Agents↗
PubMed2000

Do high impact exercises produce higher tibial strains than running?

BACKGROUND: Bone must have sufficient strength to withstand both instantaneous forces and lower repetitive forces. Repetitive loading, especially when bone strain and/or strain rates are high, can create microdamage and result in stress fracture AIM: To measure in vivo strains and strain rates in human tibia during high impact and moderate impact exercises. METHODS: Three strain gauged bone staples were mounted percutaneously in a rosette pattern in the mid diaphysis of the medial tibia in six normal subjects, and in vivo tibial strains were measured during running at 17 km/h and drop jumping from heights of 26, 39, and 52 cm. RESULTS: Complete data for all three drop jumps were obtained for four of the six subjects. No statistically significant differences were found in compression, tension, or shear strains with increasing drop jump height, but, at the 52 cm height, shear strain rate was reduced by one third (p = 0.03). No relation was found between peak compression strain and calculated drop jump energy, indicating that subjects were able to dissipate part of the potential energy of successively higher drop jumps by increasing the range of motion of their knee and ankle joints and not transmitting the energy to their tibia. No statistically significant differences were found between the principal strains during running and drop jumping from 52 cm, but compression (p = 0.01) and tension (p = 0.004) strain rates were significantly higher during running. CONCLUSIONS: High impact exercises, as represented by drop jumping in this experiment, do not cause higher tibial strains and strain rates than running and therefore are unlikely to place an athlete who is accustomed to fast running at higher risk for bone fatigue.

Adult↗
PubMed2003

Reactive fibre reinforced glass ionomer cements.

The mechanical properties of glass ionomer cements used in restorative dentistry reinforced by chopped glass fibres were investigated. Reactive glass fibres with a composition in the system SiO(2)-Al(2)O(3)-CaF(2)-Na(3)AlF(6) and a thickness of 26 microm were drawn by a bushing process. The manufacturing parameters were optimized with respect to maximum strength of the glass fibre reinforced ionomer cements. Powder to liquid ratio, pre-treatment of the glass, grain size distribution and fibre volume fraction were varied. Glass fibre and cement were characterized by X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy techniques, respectively. The highest flexural strength of the reinforced cement (15.6 MPa) was found by compounding 20 vol% reactive fibres and extending the initial dry gelation period up to 30 min. Microscopic examination of the fractured cements indicated a distinct reactive layer at the fibre surface. A pronounced fibre pull out mode gives rise to an additional work-of-fracture contributed by pulling the fibres out of the fracture surface.

Compressive Strength↗
PubMedDate not supplied

Carbon fiber reinforced root canal posts. Mechanical and cytotoxic properties.

The aim of this study was to compare the mechanical properties of a prefabricated root canal post made of carbon fiber reinforced composites (CFRC) with metal posts and to assess the cytotoxic effects elicited. Flexural modulus and ultimate flexural strength was determined by 3 point loading after CRFC posts had been stored either dry or in water. The bending test was carried out with and without preceding thermocycling of the CFRC posts. The cytotoxicity was evaluated by an agar overlay method after dry and wet storage. The values of flexural modulus and ultimate flexural strength were for dry stored CFRC post 82 +/- 6 GPa and 1154 +/- 65 MPa respectively. The flexural values decreased significantly after water storage and after thermocycling. No cytotoxic effects were observed adjacent to any CFRC post. Although fiber reinforced composites may have the potential to replace metals in many clinical situations, additional research is needed to ensure a satisfying life-span.

Animals↗
PubMed1987

Stiffness behaviour of trabecular bone specimens.

Trabecular bone specimens were tested by non-destructive technique with the purpose of investigating stiffness behaviour and optimizing stiffness determination. Cylindrical specimens (n = 25) were loaded repetitively (0.1 Hz, 30 cycles) by axial compression to 50% of predicted ultimate strength and finally compressed to failure. Analyses of single compression curves showed increasing stiffness (E') until a stress level about 50% of ultimate stress followed by decreasing stiffness. Curve fit analysis of the elastic part of the compression curve showed the best fit, when a second order polynomial was used (r = 0.94, p less than 0.001). The stiffness determined non-destructively at the 25% level of ultimate strength increased significantly to the tenth loading cycle followed by a steady state. The precision of stiffness determination as an average of five consecutive measurements at steady state was E' +/- less than 5% (95% confidence limits). A reproducibility test by repetition of the test sequence after 3 h rest showed qualitatively the same stiffness behaviour. The variation of stiffness determination between the two test sequences was +/- 27% at the first loading cycle falling to +/- 12% at steady state.

Bone and Bones↗
PubMed2002

Experimental ammonia-free phosphate-bonded investments using Mg(H2PO4)2 solution.

In our previous study, we investigated ammonia-free phosphate-bonded investments using Mg (H2PO4)2 powder. The purpose of the present study was to attempt usage of 50 wt% Mg (H2PO4)2 solution instead of powder. Magnesium oxide (MgO) was prepared as a binder and cristobalite was selected as a refractory. After arranging six kinds of experimental investments (A-F) with different cristobalite/MgO ratios, the fundamental properties of the dental investments were examined. The properties of the molds were influenced by the amount of MgO. Decreases in MgO showed lower mold strengths, longer setting time and larger setting expansion. According to XRD analysis, the peaks of MgH(PO4)3 x 3H2O newly formed, cristobalite and MgO were detected in the A set, but MgO peaks in F set were reduced. On the other hand, the surface of F was entirely covered by phosphorus. From these results, it was found that the usage of Mg(H2PO4)2 solution was possible for ammonia-free investments.

Ammonia↗