Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “surface modification”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

Synchronized onset of nuclear and cell surface modifications in U937 cells during apoptosis.

In this study we investigated the relationship between nuclear and cell surface modifications (i.e. blebbing, phosphatidylserine [PS] and sugar residues exposure) in a monocytic cell line, U937, during apoptosis induced by oxidative stress (1 mM H2O2) or inhibition of protein synthesis (10 microg/ml puromycin). Dying cells were simultaneously observed for nuclear modifications, presence of superficial blebs and plasma membrane alterations. Morphological analysis performed by conventional fluorescence microscopy, or by transmission and scanning electron microscopy showed that the courses of nuclear and membrane alterations occured concomitantly, but the phenotype was dependent on the stage of the apoptotic process and the type of apoptogenic inducer used. The progression of apoptosis in U937 cells beyond early stages resulted in the extensive formation of blebs which concomitantly lost some typical markers of apoptosis, such as PS and sugar residues. Therefore, the modality by which the nucleus condenses, or the amount and the pattern of distribution of PS on the cell surface were, for each cell line, strictly related to the apoptogenic inducer. The morphological data reported in the present paper should lead to a more precise quantification of apoptosis by improving the detection of apoptotic cells in vivo (i.e. in tissue, organs), which is a crucial point in the evaluation of efficiency of antiproliferative drugs, such as antiblastic or immunosuppressive compounds.

Apoptosis↗

Fabrication of efficient DNA microarray by additional surface modification and functional probe design.

DNA microarray, which exploits the preferential binding of complementary single stranded nucleic acids, is a powerful tool for obtaining high-throughput characterization of gene expression. Although this system is evolving rapidly, low-reproducibility of hybridization data is a major drawback to be overcome. Here, we developed additional surface modification step to reduce the hydrolysis of silyl ether bond between glass surface and linker molecule. In addition, we designed functional DNA probe for reducing the chemical treatments of glass surface. These surface/probe modifications will be helpful in fabricating more efficient DNA microarray system.

DNA Probes↗

Surface Modification of a Hydrogen-Bonded Pigment: A Fluorescence Spectroscopy Study.

The effect of hydrogen-bonding additives on the surface modification of a hydrogen-bonded organic pigment is studied using absorption and fluorescence spectroscopy. Evidence for surface dissolution that occurs during the mixing of solids is presented. The spectral signatures of monomers and hydrogen-bonded aggregates of the pigment that are present on the surface of crystallites of the pigment are quite distinct, as revealed by fluorescence excitation and emission spectra. Copyright 1999 Academic Press.

Journal Article↗

Surface modification of pyrophyllite with amino silane coupling agent for the removal of 4-nitrophenol from aqueous solutions.

The surface of naturally hydrophobic mineral pyrophyllite was modified to hydrophilic by treatment with prehydrolyzed N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (APEO) coupling agent to prepare a novel and effective adsorbent for the removal of 4-nitrophenol (4-NP) from aqueous solutions. XRD, FTIR, and SEM analyses were used to characterize the surface modification. It was found that after the grafting procedure, heat treatment at 110 degrees C results in condensation reaction between the OH groups of the APEO molecule and the hydroxyl groups and/or oxygen atoms on the pyrophyllite surface and the adsorption of 4-NP by APEO-modified pyrophyllite involves interactions between dissociated 4-NP molecules and protonated amine groups of APEO molecules attached to the mineral surface. Adsorption equilibrium data for 4-NP adsorption on APEO-treated and untreated pyrophyllite were most satisfactorily fitted using the Freundlich adsorption isotherm and adsorption capacity was found to be 0.268 mg/g for modified pyrophyllite whereas it was only 0.105 mg/g for untreated pyrophyllite.

Journal Article↗

Advanced surface modification of indium tin oxide for improved charge injection in organic devices.

A new method is described for surface modification of ITO with an electroactive organic monolayer. This procedure was done to enhance hole injection in an electronic device and involves sequential formation of a monolayer of a pi-conjugated organic semiconductor on the indium tin oxide (ITO) surface followed by doping with a strong electron acceptor. The semiconductor monolayer is covalently bound to the ITO, which ensures strong adhesion and interface stability; reduction of the hole injection barrier in these devices is accomplished by formation of a charge-transfer complex by doping within the monolayer. This gives rise to very high current densities in simple single layer devices and double layer light emitting devices compared to those with untreated ITO anodes.

Journal Article↗

Surface modification of microchip input reservoirs for pressure-induced sample injection into microreactors.

Optimization of geometry and surface modification of microchip input reservoirs were performed to achieve uninterferenced pressure-induced sample injection of multiple samples into microreactors using a single syringe pump. Nine samples of 3.5 microL were pipetted onto input reservoirs and loading of PCR mixture into 260 nL microreactors was achieved followed by successful PCR amplification, confirming that no cross-contamination occurs during injection.

DNA↗

[Surface modifications of titanium implant material with excimer laser for more effective osseointegration].

The biointegration of dental and orthopaedic implants depends mainly on the morphology and physical-chemical properties of their surfaces. Accordingly, the development of the desired microstructure is a relevant requirement in the bulk manufacture. Besides the widely used sandblasting plus acid etching and plasma-spray coating techniques, the laser surface modification method offers a plausible alternative. In order to analyze the influence of the laser treatment, the surfaces of titanium samples were exposed to excimer laser irradiation. The aim of this study was to develop surfaces that provide optimal conditions for bone-implant contact, bone growth, formation and maintenance of gingival attachment. For this purpose, holes were ablated on the surface of samples by nanosecond (18 ns, ArF) and also sub-picosecond (0,5 ps, KrF) laser pulses. Using pulses of ns length, due to melt ejection, crown-like protrusions were formed at the border of the holes, which made them sensitive to mechanical effects. To avoid these undesirable crown-like structures ultrashort KrF excimer laser pulses were successfully applied. On the other hand, titanium samples were laser-polished in favour of formation and connection of healthy soft tissues. Irradiation by a series of nanosecond laser pulses resulted in an effective smoothening as detected by atomic force microscopy (AFM). By inhibiting plaque accumulation this favours formation of gingival attachment. X-ray photoelectron spectroscopy (XPS) studies showed that laser treatment, in addition to micro-structural and morphological modification, results in decreasing of surface contamination and thickening of the oxide layer. X-ray diffraction (XRD) analysis revealed that the original alpha-titanium crystalline structure of the laser-polished titanium surface was not altered by the irradiation.

Dental Implants↗

Immunodissection of sperm surface modifications during epididymal maturation.

Mammalian spermatozoa undergo changes in morphology, composition, and function during transit through the epididymis. These changes correlate with acquisition by sperm of the ability to fertilize ova. It has been found that sperm from the cauda epididymidis, but not those from the caput epididymidis, are able to bind to the zona pellucida. This would imply a modification in sperm surface characteristics. Biochemical and immunological studies have demonstrated changes in sperm surface composition during epididymal maturation. These changes involve addition of epididymal secretory products to the sperm surface, loss or alteration of existing sperm surface molecules, and possibly the unmasking of preexisting molecules or epitopes. Several laboratories have studied the epididymal secretory proteins in the rat, but a consensus has not been reached on the identification, characterization, source, and sperm surface association of these proteins. Monoclonal antibodies are beginning to be used to characterize sperm surface components and sperm maturation antigens. They are proving to be valuable tools for the dissection of epididymal maturation when used in conjunction with biochemical and physiological approaches.

Animals↗

Comparison of different surface modification techniques for electrodes by means of electrochemistry and micro synchrotron radiation X-ray fluorescence. dimerization of cobalt(II) tetrasulfonated phthalocyanine and its influence on the electrodeposition on gold surfaces.

This paper compares different electrochemical surface modification techniques with special attention to the immobilization of cobalt(II) tetrasulfonated phthalocyanine tetrasodium salt (Co(II)TSPc) on gold electrodes. Electrochemical and synchrotron radiation X-ray fluorescence (SR-XRF) microbeam analysis were performed in order to compare the amount of adsorbed CoTSPc onto the gold electrode and to determine the level of uniformity of the deposited layer. The nondestructive, quantitative characterization of CoTSPc deposition on gold electrodes by means of scanning SR-XRF on the microscopic scale has never been described before. The described methodology can be in general used for thin-film characterization. Depending on the degree of dimerization of the CoTSPc molecules, different electrochemical behavior is observed.

Journal Article↗

Effect of surface modification on aggregation of phospholipid vesicles.

Phospholipid vesicles have been extensively investigated because of their usefulness as models for biological membranes and their potential application as carriers for drug delivery. However, preparations of small sonicated vesicles tend to aggregate and fuse (on storage at room temperature and at 4 degrees C), resulting in significant changes in turbidity, rate of uptake by macrophage, and proton NMR linewidths. By modification of the surface of phospholipid vesicles with charged groups such as beta-aminogalactose that extend significantly from the vesicle surface, it is possible to obtain preparations that are stable for greater than 7 days.

Animals↗

Biochemical surface modification of Ti-6Al-4V for the delivery of protein to the cell-biomaterial interface.

Biochemical surface modification involves delivery of biomolecules to the tissue-implant interface to induce desired cell and tissue responses. We have previously had success in immobilizing and retaining bioactive molecules on Co-Cr-Mo but not on Ti-6Al-4V. The purpose of this study was to modify the gamma-aminopropyltriethoxysilane (APS) scheme to enable successful attachment of protein to the surface of Ti-6Al-4V. Ti-6Al-4V samples were silanized with organic (acetone) solutions of APS and dried at increasing temperatures. Concentrations resulting in 2-4 NH2 per nm2 of nominal surface area were incubated in physiological saline for up to 96 hr to assess retention of amino groups. A model protein, trypsin, was coupled to silanized Ti-6Al-4V via glutaraldehyde. The samples were then incubated in saline, and the activity of residual immobilized enzyme was quantified. After drying at 45, 80, or 115 degrees C, the NH2 groups were lost from the surface by 24 hr of incubation in saline. On samples dried at 150 degrees C, with 4% APS, the number of NH2 groups increased after 8 hr and remained relatively constant through 96 hr. Likewise, at 150 degrees C with 2% APS the surface density of NH2 groups reached a maximum at 24 hr and remained relatively constant up to 96 hr. When incubated for 96 hr, Ti-6Al-4V with 4% APS and dried at 150 degrees C retained approximately 31% of the activity initially immobilized, whereas protein on 45 degrees C or adsorbed samples was lost by 24-48 hr.

Alloys↗

Surface modification with functionally active heparin.

Efforts to improve the blood compatibility of artificial materials have involved coating the surfaces with heparin. However, the anticoagulation activity of heparin is based on its binding to antithrombin, and if the specific structure involved in this interaction is compromised by the coating procedure, then the activity is lost. Surface modification with end-point-immobilized heparin has been found to be successful in inhibiting coagulation factors and minimizing complement activation.

Antithrombin III↗

Surface and chemical properties of surface-modified UHMWPE powder and mechanical and thermal properties of its impregnated PMMA bone cement, IV: effect of MMA/accelerator on the surface modification of UHMWPE powder.

In our previous study, we manufactured a reinforced poly(methylmethacrylate) (PMMA) bone cement with 3 wt% of the surface-modified ultra high molecular weight polyethylene (UHMWPE) powder to improve its poor mechanical and thermal properties resulting from unreacted methylmethacrylate (MMA), the generation of bubble and shrinkage, and high curing temperature. In the present study, the effect of ratios of MMA and N,N'-dimethyl-p-toluidine (DMPT) solutions in redox polymerization system was investigated for the surface modification of UHMWPE powder. We characterized physical and chemical properties of surface-modified UHMWPE powder and reinforced bone cements by a scanning electron microscope, ultimate tensile strength (UTS) and curing temperature (Tmax). It was found that UTSs (41.3-51.3 MPa) of the reinforced PMMA bone cements were similar to those (44.5 MPa) of conventional PMMA bone cement (control), as well as significantly higher (P < 0.05) than those (33.8 MPa) of 3 wt% unmodified UHMWPE powder-impregnated bone cement. In particular, the UTS of redox polymerization system using MMA/DMPT solution was better than that of radical system using MMA/xylene solution. Also, Tmax of the reinforced PMMA bone cements decreased from 103 to 72-84 degrees C. From these results, we confirmed that the surface-modified UHMWPE powder can be used as reinforcing agent to improve the mechanical and thermal properties of conventional PMMA bone cement.

Biomechanical Phenomena↗

Surface modification of polymers for medical applications.

Most of the conventional materials do not meet the demands required for both their surface and bulk properties when used as biomaterials. An effective approach for developing a clinically applicable biomaterial is to modify the surface of the material which already has excellent biofunctionality and bulk properties. This review article focuses on the surface modification of polymers by grafting techniques, which have long been known in polymer chemistry but are not yet widely applied to biomaterials. A grafted surface can be produced primarily either by graft polymerization of monomers or covalent coupling reaction of existing polymer molecules onto the substrate polymer surface. The major surface properties that should be modified include two kinds of biocompatibility. One is the surface property that elicits the least foreign-body reactions and the other is the cell- and tissue-bonding capability. In addition, physiologically active surfaces with, for instance, selective adsorbability may be required. Attempts to produce these biocompatible or biospecific surfaces by grafting techniques are briefly overviewed in this article.

Biocompatible Materials↗

Surface modification of titanium-based alloys with bioactive molecules using electrochemically fixed nucleic acids.

A new method of surface modification for titanium (alloys) with bioactive molecules was developed with the intention of providing a new basis of implant adaptation for particular requirements of certain medical indications. Nucleic acid single strands are fixed electrochemically via their termini (regiospecifically) by growing an oxide layer on Ti6Al7Nb anodically. It could be shown that they are accessible to subsequent hybridization with complementary strands at physiological pH. Amount of nucleic acids immobilized and hybridized were determined radioanalytically using 32P-labelled nucleic acids. Stable fixation was attained at and above potentials of 4 V(SCE). Up to 4 pmol/cm2 of nucleic acid single strands could be immobilized and hybridization efficiencies up to 1.0 were reached. Hybridization efficiency was found to depend on surface density of immobilized oligonucleotides, while hybridization rates increased when MgCl2 was added. A conjugate consisting of an oligonucleotide complementary to the immobilized strand and the hexapeptide GRGDSP with RGD as an integrin recognition site was synthesized. This conjugate was able to bind to integrins on osteoblasts. It was shown that this conjugate binds to the anchor strand fixed on Ti6Al7Nb to an extent comparable with the unconjugated complementary strand.

Animals↗

Surface modification tailors the characteristics of biomimetic coatings nucleated on starch-based polymers.

This work describes the influence of surface pretreatments over the nucleation and growth of an apatite layer, formed by a biomimetic process, on which a bioactive glass is used as a precursor of the calcium-phosphate (Ca-P) formation on the materials surface. SEVA-C, a corn starch-based biodegradable blend, was used as substrate. The surfaces were pretreated during various periods by: (i) physical methods, namely ultraviolet radiation (u.v.), and over exposure to ethylene oxide sterilization (EtO); and (ii) chemical methods, namely potassium hydroxide (KOH) and acetic anhydride (CH3CO)2 etchings. The surface modifications, performed before the production of the biomimetic coatings, resulted in a faster formation of Ca-P nuclei during the first stages of SBF immersion, particularly in the case of the KOH etching. In this case, it was possible to observe a decrease in the average surface roughness, as measured by laser profilometry, and an increase of the hydrophilicity of the material, which was evident from a clear increment in the water-uptake ability and quantified by contact angle measurements. With this treatment it was possible not only to reduce the induction period for the formation of a well defined and dense apatite-like layer, as observed by scanning electron microscopy (SEM), but also to improve the adhesion of the Ca-P layer to the substrate, as confirmed by the adhesion strength tests. For all the studied pre-treatments, the composition of the films, analyzed by energy dispersive spectroscopy (EDS) and identified by thin-film X-ray diffraction (TF-XRD), seems to be very similar to that of human bone apatites.

Journal Article↗

Surface modification of poly(ethylene terephthalate) via hydrolysis and layer-by-layer assembly of chitosan and chondroitin sulfate to construct cytocompatible layer for human endothelial cells.

Surface modification of poly(ethylene terephthalate) (PET) film was performed by surface hydrolysis and layer-by-layer (LBL) assembly followed a mechanism of electrostatic adsorption of oppositely charged polymers, exemplified with chitosan and chondroitin sulfate (CS). Hydrolysis of PET in concentrated alkaline solution produced a carboxyl-enriched surface. The changes of weight loss and surface chemistry, morphology and wettability were monitored and verified by UV-vis spectroscopy, atomic force microscopy (AFM) and water contact angle. Assembly of positively charged chitosan and negatively charged CS was then conducted in a LBL manner to create multilayers on the hydrolyzed PET film. The process of layer growth and oscillation of surface wettability were monitored by UV-vis spectroscopy and water contact angle measurement, respectively. In vitro cell culture revealed that the adherence of endothelial cells was significantly enhanced on the biomacromolecules-modified PET film with preserved endothelial cell function, in particular on those assembled with larger number of chitosan/CS layers. However, with regard to cell proliferation and viability properties after cultured for 4 days, minor difference was determined between the modified and the unmodified PET films.

Adsorption↗

New surface modification of titanium implant with phospho-amino acid.

The purpose of this study was to investigate a new biochemical surface modification technique for titanium implants using phospho-amino acid. Pure titanium disks were pretreated with 10 N HCl and ultrapure water at room temperature for 30 minutes respectively. Then these disks were modified with either L-threonine (Thr) or O-phospho-L-threonine (P-Thr) at 37 degrees C for 12 hours. X-ray photoelectron spectroscopy (XPS) chemically analyzed the modified surfaces. It was revealed that the N 1s peak which originated from Thr was not detected in the wide-scan spectrum of Thr-modified surface, whereas three peaks of N 1s, P 2s, and P 2p which originated from P-Thr were detected in the wide-scan spectrum of P-Thr-modified surface. Moreover, the P 2p peak of P-Thr which reacted with the surface significantly shifted to a lower binding energy (p < 0.05). Based on the results of this study, it was concluded that P-Thr chemically bonded to the titanium surface treated with HCl.

Dental Bonding↗