Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Tooth Attrition”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

Pulp-dentin biology in restorative dentistry. Part 5: Clinical management and tissue changes associated with wear and trauma.

Tooth wear occurs during normal mastication. Pathologic wear, including abrasion and erosion, may also take place. Formation of reactionary and reparative dentin and obturation of dentinal tubules are biologic responses that compensate for the loss of tissue. Physical trauma to teeth will affect the blood supply to the pulp. Extensive physical trauma may result in the formation of mineralized, often bonelike tissue in the pulp chamber. Minor trauma, such as that associated with orthodontic tooth movement, may exert transient effects on the pulp or it may result in permanent structural changes. No experimental data involving restorative work on traumatized teeth have been published, but available evidence suggests that special care may be necessary in the restoration of such teeth because their reaction patterns may differ from those in nontraumatized teeth.

Dental Deposits↗

Micromorphological study of resin-dentin interface of non-carious cervical lesions.

This study examined the interfaces between two dentin adhesives, namely, One Coat Bond, Clearfil SE Bond and a resin-modified glass ionomer cement (Fuji II LC) and the dentin of non-carious cervical lesions (NCCLs) with FE-SEM, and compared them with the interfaces produced with "normal" dentin. Fifteen human premolars each with a buccal NCCL were used. Cervical cavities were prepared on the lingual surface of the same teeth for the normal (control) dentin. All lesions and prepared cavities were cleaned with a slurry of pumice and water. The teeth were randomly divided among the three products that were applied according to the manufacturers' instructions. For the resin-bonded specimens, the cavities were restored with resin composite. All specimens were stored in 37 degrees C tap water. Resin-bonded specimens were observed using FE-SEM after treatment with 10% phosphoric acid, and 10% phosphoric acid and 5% sodium hypochlorite (NaOCl). The resin-modified glass ionomer cement (RM-GIC) specimens were observed after 10% phosphoric acid and 5% NaOCl treatment. The hybrid layer could be observed for the two adhesive systems in all specimens, but the thickness varied depending on the bonding system used and the dentin substrate. The results suggested that the hybrid layer produced in normal dentin was slightly thicker than that of NCCLs. Further, the hybrid layer thickness decreased in all specimens after NaOCl treatment.

Bicuspid↗

The treatment of localised anterior tooth wear with indirect Artglass restorations at an increased occlusal vertical dimension. Results after two years.

This study evaluated the use of indirect palatal veneers placed at an increased vertical dimension of occlusion in patients with advanced localised anterior tooth wear. A total of 75 indirect Artglass palatal veneers were cemented on 12 patients. Patients were reviewed until the posterior occlusion had re-established and then annually. Preliminary follow up at two years showed minor failures had occurred in 13.3% of cases. These were repaired with direct composite or polishing only. Posterior occlusion was restored after a mean duration of nine months in ten cases. Artglass indirect palatal restorations are an effective short-term treatment of localised anterior tooth wear.

Adolescent↗

Understanding and managing dentin hypersensitivity.

Dental hygienists frequently encounter clients who present with one or several sensitive teeth. These clients often rely on the dental hygienist to help determine the cause and to provide supportive treatment to relieve their discomfort. Therefore, it is essential for dental hygienists to fully understand the complexity of dentin sensitivity, be well informed about treatment approaches, and have an appreciation of the difficulties inherent in designing and conducting clinical hypersensitivity trials. Difficulties in designing hypersensitivity research have precluded a definitive answer concerning a best treatment approach. The purpose of this course is to present dental hygienists with current information about the pain of sensitive teeth and the associated differential diagnosis. The theory of pain transmission, etiology of dentin sensitivity, professional and self-care treatment modalities, and natural remission of tooth sensitivity will be discussed. Tooth and pulp biology will be reviewed as a means of explaining treatment and management approaches. At completion of this course, as measured by a post-test, participants with be prepared to apply the knowledge gained to their evidence-based practice to positively impact the oral health of their clients.

Dental Hygienists↗

Consensus-based recommendations for the diagnosis and management of dentin hypersensitivity.

These consensus recommendations for the diagnosis and management of dentin hypersensitivity were developed by a broadly constituted board of dentists and dental hygienists drawn from general dental practice, specialist practice, academia and research from across Canada, joined by 2 international dentists with subject matter expertise. The need for consensus recommendations was made evident by the lack of clear and robust evidence in the dental literature, as well as confusion about diagnosis and management demonstrated by an educational needs assessment survey. High prevalence of the condition, underdiagnosis and widespread availability of noninvasive, efficacious and inexpensive preventive treatment further underscored the need for direction. This paper outlines the key elements of the scientific basis for the causes, diagnosis and management of dentin hypersensitivity; where such evidence is deficient, the document relies on the compound experience of the board. A simple algorithm was developed to guide clinicians through the diagnostic process and assist them in determining appropriate case management. Finally, the board makes a series of recommendations to raise awareness, to improve dental education, to develop symbols for charting, to develop an index for case assessment and for further research.

Algorithms↗

[Histopathological and therapeutical aspects of cervical lesions].

The term "cervical lesions" definies all the alterations consisting in a loss of hard dental tissues located along the cement-enamel junction, and may be more specifically defined as carious lesions (LCC) and non-carious lesions (NCCL). The non-carious cervical lesions are characterized by the loss of mineralised dental tissue in the absence of a carious process. This definition includes three different lesion categories: abrasion, erosion and the cervical lesions caused by stress (abfractions). In this paper the authors explain the histological, clinical, preventive findings of NCCL and try to give some guidelines to choose the appropriate material to restore different types of non carious cervical lesions.

Dental Caries↗

A study on occlusal stability in shortened dental arches.

PURPOSE: The aim of this study was to verify the hypothesis that shortened dental arches constitute a risk to occlusal stability. MATERIALS AND METHODS: Using cluster samples, 725 subjects with shortened dental arches comprising intact anterior regions and zero to eight occluding pairs of posterior teeth and 125 subjects with complete dental arches were selected. Subjects with shortened dental arches were classified into eight categories according to arch length and symmetry. Parameters for occlusal stability were interdental spacing, occlusal tooth wear, occlusal contact of incisors in intercuspal position, and vertical and horizontal overlap. Additionally, tooth mobility and overeruption of unopposed teeth were assessed. Influence of independent variables (dental arch category, age, gender, and residence) on the parameters for occlusal stability was assessed by one-way ANOVA and Tukey's multiple range tests. RESULTS: Extreme shortened dental arches (zero to two pairs of occluding premolars) had significantly more interdental spacing, occlusal contact of incisors, and vertical overlap compared to complete dental arches. Occlusal wear and prevalence of mobile teeth were highest in these categories. The category with three to four occluding premolars had significantly more interdental spacing and, for the older age group, more anterior teeth in occlusal contact compared to complete dental arches. Age was consistently associated with increased changes in occlusal integrity. CONCLUSION: Signs of increased risk to occlusal stability seemed to occur in extreme shortened dental arches, whereas no such evidence was found for intermediate categories of shortened dental arches.

Adult↗

Bonding to worn or fractured incisal edges: shear bond strength of new adhesive systems.

OBJECTIVES: Resin composites can be proposed for the restoration of incisal edges. If a progressive wear or an old fracture is responsible for the loss of the incisal edge, the bonding substrate is likely to be sclerotic dentin, surrounded by enamel. The purpose of the study was to measure under laboratory conditions, the shear bond strength of three adhesive systems to the enamel and dentin exposed on the edge of incisors as a result of a long-time wear or an old fracture. METHOD AND MATERIALS: Thirty extracted human incisors were selected. The teeth had to exhibit some exposed dentin on their edges, a result of old fractures or wear. The 30 specimens were randomly divided into three groups. In each group, a different adhesive system was tested for the ability to efficiently bond a resin composite restoration to the dental substrate. A three-step system (Scotchbond Multipurpose Plus), a one-bottle adhesive (Scotchbond 1), and a self-etching adhesive (Prompt-L-Pop) were compared. The shear bond strength of the restored samples was measured under a loading machine. The pattern of failure that each sample underwent as a result of loading was assessed under a stereomicroscope. RESULTS: The highest values of bond strength were yielded by Scotchbond Multipurpose Plus (28.14 MPa), followed by Scotchbond 1 (16.15 MPa), and Prompt-L-Pop (9.26 MPa). These differences were statistically significant (P < .05). The most frequent pattern of failure was the combined adhesive-cohesive in resin fracture. CONCLUSION: Adhesive systems involving phosphoric acid etching of the substrate were more dependable than a self-etch adhesive when bonding a resin composite restoration to worn or fractured incisal edges.

Acid Etching, Dental↗

Short tooth syndrome: diagnosis, etiology, and treatment management.

The periodontal-restorative team is uniquely positioned to provide the esthetic procedures that today's sophisticated patient population has come to expect. Not only is health and function of great desire but also esthetics is in demand. Armed with periodontal-plastic procedures and technically advanced restorative materials, the periodontal-restorative team can provide these patient needs. The challenge becomes making the correct diagnosis and selecting the appropriate treatment regimen.

Crown Lengthening↗

Resin bonding to sclerotic, noncarious, cervical lesions.

Noncarious, cervical, wedge-shaped, sclerotic lesions are commonly encountered in clinical practice. In such lesions, dentin has been pathologically altered, often resulting in partial or complete obliteration of the dentinal tubules. These lesions are known to respond to etching and bonding differently from normal dentin, leading to complications during clinical treatment. A search of the literature was performed to obtain background information on the most commonly cited etiologic factors, clinical diagnoses, and morphologic and chemical characterizations along with an extensive review of all potential obstacles to bonding the most recent adhesives to such a dentinal substrate. Recent progress in adaptive strategies to render dentin more receptive to resin bonding is emphasized in this article, and the major drawbacks of these strategies are discussed.

Acid Etching, Dental↗

An assessment of stress analyses in the theory of abfraction.

Wedged-shaped lesions at the cemento-enamel junction of teeth have been attributed primarily to biomechanical loading forces that cause flexure and failure of enamel and dentin. This theory, termed abfraction, remains controversial. This review examined studies on mechanical properties of enamel and dentin and studies on bite forces and mastication as background information. Abfraction is based principally on a few early finite element analysis and photoelastic models showing stress concentration at the dental cervical area without actually showing enamel and dentin fracture. However, a review of more recent dental stress analyses has been contradictory. Particularly, analyses of the periodontal ligament and alveolar bone, not modeled in previous studies, have shown that those structures may dissipate occlusal loading forces from the cervical areas. In addition, some models may not fully represent intricate dental anatomy and complex occlusal function. Therefore, the key basis of the abfraction theory may be flawed.

Animals↗

Visualization before finalization: a predictable procedure for porcelain laminate veneers.

The success and acceptance of anterior aesthetic restorations is based on a shared common vision and understanding between the patient and the clinician. If each has a different perception of how the definitive restorations will appear, this may lead to disappointment and refusal of the final restorations by the patient. This article describes the treatment of six maxillary anterior teeth with porcelain veneers using a practical approach that allows the dentist and the patient to agree on the appearance of the final restorations prior to actual fabrication and fitting of the definitive veneers.

Adult↗

Maxillary and mandibular overlay removable partial dentures for restoration of worn teeth. A three-year follow-up.

This clinical report describes the fabrication and a three-year follow-up of maxillary and mandibular cast overlay removable partial dentures for the restoration of severely worn dentition with accompanying loss of vertical dimension of occlusion. The frameworks supported porcelain veneers for esthetics, and metal occlusal surfaces for strength and durability.

Chromium Alloys↗