Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Solid Waste”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
PubMed2006

Dynamic transformations of nitrogen during mechanical-biological pre-treatment of municipal solid waste.

Mechanical-biological pre-treatment (MBP) of municipal solid waste (MSW) has gained evidence as a practice capable of accomplishing the requirements for environmental sustainable landfilling. In particular, MBP is effective in reducing the ammoniacal nitrogen content in the leachate. However, few data are available on the modifications of the nitrogen forms occurring during MBP and on the role played by processes such as nitrification and generation of refractory organic compounds. The dynamic transformations of nitrogen were investigated during the MBP. MSW was mechanically and biologically pre-treated; samples were collected at different stages of the process and analysed to investigate the evolution of nitrogen forms; batch and column leaching tests were performed as well. The results indicate that nitrification is negligible and volatilization can only partially explain the low ammoniacal nitrogen content in the leachate. Incorporation of ammoniacal nitrogen into a refractory organic form was assessed and is likely to play an important role. The maximum content of refractory organic nitrogen in the solid waste was achieved after about 60 days of aerobic pre-treatment; therefore, the minimal duration of the MBP should be about 8-9 weeks in order to optimize the ammoniacal nitrogen incorporation, unless the waste is characterized by a low C/N ratio.

Ammonia↗
PubMed1975

Thermophilic anaerobic digestion of solid waste for fuel gas production.

Anaerobic digestion offers a potential means of converting organic solid waste into fuel gas and thereby provide a supplemental and readily utilizable source of energy. We are particularly interested in the use of thermophilic digestion over a mesophilic operation for it can achieve higher rates of digestion, greater conversion of waste organics to gas, faster solid-liquid separation, and minimization of bacterial and viral pathogen accumulation. Our results comparing mesophilic (37 degree C) and thermophilic (65 degree C) anaerobic digestion of domestic solid waste confirm the increased rate and conversion of waste to methane. In addition, utilizing radioactive labeling of glucose and acetic acid, we have measured the volumetric rates of volatile acid production and disappearance under both mesophilic and thermophilic conditions.

Anaerobiosis↗
PubMed2003

Municipal solid waste in situ moisture content measurement using an electrical resistance sensor.

Moisture content (MC) is a crucial parameter for degradation of solid waste in landfills. Present MC measurement techniques suffer from several drawbacks. A moisture sensor for measurement of in situ moisture content of solid waste in landfills was developed. The sensor measures the electrical resistance across the granular matrix of the sensor, which in turn can be correlated to moisture content. The sensor was also equipped with a thermocouple and tubing that permits simultaneous measurement of temperature and gas sampling. The electrical conductivity of the surrounding moisture and the temperature in the matrix both affect the resistance measurements. This paper describes the results of laboratory experiments designed to select the appropriate granular media particle size, measure the influence of moisture electrical conductivity and temperature, and develop calibration relationships between measured resistance and gravimetrically determined moisture content. With a few limitations, the sensor is able to detect MC of solid waste under conditions allowing moisture movement into the sensor. The application of this technique shows promise for use in bioreactor landfills where high moisture contents are expected and desired.

Biodegradation, Environmental↗
PubMed2002

Control of mercury emissions from a municipal solid waste incinerator in Japan.

The control of Hg emissions from a municipal solid waste incinerator (MSWI) is very important, because more than 78% of municipal solid waste (MSW) is incinerated. The Hg content of coal used in utility boilers is relatively low in Japan. In this study, recent trends in the Hg content of MSW in Japan and activated carbon (AC) injection as a control technology of Hg emission from an MSWI are discussed. The effect of AC injection on Hg removal from flue gas in an MSWI was investigated by pilot-scale experiments using a bag filter (BF). The injection of AC increases the Hg reduction ratio by 20-30% compared with cases without AC injection. The Hg reduction ratio increases as the flue gas temperature decreases. The Hg reduction ratio is closely related to the inlet Hg concentration and was expressed with a Langmuir-type adsorption isotherm.

Adsorption↗
PubMed2006

A methodology for solid waste characterization based on diminishing marginal returns.

A methodology is developed for estimating the number of waste sorts for characterizing solid wastes into categories based on diminishing minimum incremental information. Convergence in the square of the coefficient of variation with successive waste sorts is used to indicate cost-efficient termination of sampling at substantially reduced numbers of sorts in comparison with existing methodologies. These findings indicate that the numbers of waste sorts beyond that determined using the proposed methodology do not add substantial marginal gains in information and/or reduction in the confidence interval of the estimate. The methodology is demonstrated using waste composition analyses from the Greater Vancouver Regional District where 22 waste sorts are examined. The proposed methodology is simple, and the number of waste sorts can be estimated with a hand-held calculator and utilized in the field.

Confidence Intervals↗
PubMed2006

A decision support system for the operational planning of solid waste collection.

This study presents the conception, modeling, and implementation of a decision support system applied to the operational planning of solid waste collection systems, called SCOLDSS. The main functionality of the system is the generation of alternatives to the decision processes concerning: (a) the allocation of separate collection vehicles, as well as the determination of their routes and (b) the determination of the daily amount of solid waste to be sent to each sorting unit, in order to avoid waste of labor force and to reduce the amount of waste sent to the landfills. To develop the computer system, a combination of quantitative techniques was used, such as: simulation of discrete events and algorithms/heuristics for vehicle allocation and routing. The system was developed using the Borland Delphi environment and the commercial software Arena to carry out the simulations. We also present a computational study with real-life data from the solid waste collection in Porto Alegre, Brazil, in which we show that the results provided by the computational system outperform the operation planning currently adopted.

Algorithms↗
PubMed2002

Cr(VI) removal in acidic aqueous solution using iron-bearing industrial solid wastes and their stabilisation with cement.

In this study, iron-bearing industrial solid wastes iron filings, ETP sludge of steel and red mud of aluminium industries; were used for Cr(VI) removal at pH 3. A complete removal of Cr(VI) was found for initial 10 mg 1(-1) of 100 ml solutions in the presence of 2.5 g iron filings, 8 g ETP sludge and 10 g red mud for up to one hour of shaking at room temperature. After Cr(VI) removal, inclusion of chromium on the reacted iron filing surface was demonstrated by EDAX analysis. Leachability of chromium and iron from the reacted wastes was determined by using Toxicity Characteristics Leaching Procedure (TCLP). This test showed a very low level of leachability of chromium as Cr(III) and iron from the reacted wastes. To minimise their leachability further, Cr(VI)-reacted solid wastes were stabilised with Portland cement in their 3:1 ratio. Leachability tests of stabilised wastes by TCLP indicated a considerable decrease in leachability of chromium and iron compared with the that of reacted wastes alone. To explore the possibility of utilisation in building materials, bricks of cement-mixed Cr(VI)-reacted wastes were made and their comprehensive strength, durability and leachability under immersion conditions were measured.

Aluminum↗
PubMed2006

Recovery and recycling practices in municipal solid waste management in Lagos, Nigeria.

The population of Lagos, the largest city in Nigeria, increased seven times from 1950 to 1980 with a current population of over 10 million inhabitants. The majority of the city's residents are poor. The residents make a heavy demand on resources and, at the same time, generate large quantities of solid waste. Approximately 4 million tonnes of municipal solid waste (MSW) is generated annually in the city, including approximately 0.5 million of untreated industrial waste. This is approximately 1.1 kg/cap/day. Efforts by the various waste management agencies set up by the state government to keep its streets and neighborhoods clean have achieved only minimal success. This is because more than half of these wastes are left uncollected from the streets and the various locations due to the inadequacy and inefficiency of the waste management system. Whilst the benefits of proper solid waste management (SWM), such as increased revenues for municipal bodies, higher productivity rate, improved sanitation standards and better health conditions, cannot be overemphasized, it is important that there is a reduction in the quantity of recoverable materials in residential and commercial waste streams to minimize the problem of MSW disposal. This paper examines the status of recovery and recycling in current waste management practice in Lagos, Nigeria. Existing recovery and recycling patterns, recovery and recycling technologies, approaches to materials recycling, and the types of materials recovered from MSW are reviewed. Based on these, strategies for improving recovery and recycling practices in the management of MSW in Lagos, Nigeria are suggested.

Cities↗
PubMed2001

Speciation and removal of zinc from composted municipal solid wastes.

This paper presents composting of the organic fraction of municipal solid waste containing 50,000 mg/kg of cellucotton and 7980 mg/kg of zinc carried out under laboratory conditions. In the initial material as well as the compost obtained, zinc, cadmium, copper, nickel, and lead were analyzed, and their forms were determined by means of sequential extraction. It was found that 65% of zinc occurs in the organically bound form. Removal of zinc from the waste through leaching and subsequent electrochemical separation from the leaching solution was also examined. A double extraction of the waste with sodium diphosphate(V) enables a reduction of zinc content to 1240 mg/kg. As a result of electrolysis of the leaching solution, 90.2% of Zn is separated on the cathode. This paper suggests a method for processing municipal solid waste with high zinc content based on extraction of the waste with sodium diphosphate(V) and composting. The leaching solution is recovered electrochemically.

Antineoplastic Agents↗
PubMed2002

Report: management problems of solid waste landfills in Kuwait.

This paper evaluates current operational practices in municipal solid waste landfills in Kuwait to provide existing knowledge on uncontrolled landfilling and associated problems of solid waste disposal in developing countries. The current landfilling practices are safe neither for humans nor for the environment. The landfill sites receive all kinds of wastes such as food wastes, oil products, debris, dead animals, agricultural wastes, chemical wastes, wastewater and sewage sludge. The wastes are dumped, spread and compacted in an uncontrolled manner and cover material is not applied regularly. Dust created within the landfill site and gas emissions cause a public nuisance. The characteristics of leachate formed indicate high organic content and presence of heavy metals, salts and nutrients. There are no provisions for leachate or landfill gas collection at the landfill sites. Recommendations for adjustment in landfill operation have been made in recognition of the transition period that is experienced in proceeding from the past and present to the future management of landfills in Kuwait to safeguard the public health and protect the environment.

Environmental Monitoring↗
PubMed2003

[Composting technology of municipal solid waste with inoculation agent].

This paper introduced composting technology of municipal solid wastes (MSW) with inoculation agent, used complex microbial community, ordure of horse, composting, soil of garden and sewage sludge as inoculation agent, the temperature, oxygen consumption rate, organic matters degradation rate and outlet H2S gas were detected and analyzed in composting process. The experimental results indicated that adding inoculation agent to municipal solid wastes were proper for enhancing the composting temperature, oxygen consumption rate and controlling well H2S gas. Especially, when adding complex microbial community or ordure of horse as inoculation were effective to compose organic matter and speed up composting into humus. Therefore, adding inoculation agent to MSW greatly influence the rate of organic degradation and was useful to improve composting conditions.

Bacteria↗
PubMed2006

Prevalence of hepatitis A virus infection among municipal solid-waste workers.

A study was conducted among 151 municipal workers (72 solid-waste workers, and 79 workers not exposed to waste). Total antibodies against Hepatitis A virus (HAV) were measured, and socio-demographic information was collected using a self-administered questionnaire. Univariate analysis has shown that occupational exposure to waste, age, duration of employment and educational status were significantly associated with the prevalence of anti-HAV(+). Municipal Solid Waste Workers had a higher prevalence of anti-HAV(+) in comparison with municipal workers not exposed to waste. Duration of employment was significantly associated anti-HAV(+). Multivariate analysis revealed an independent association of anti-HAV(+) with occupational exposure to waste and ageing. Our results suggest a potential causal role of occupational exposure to waste, in the development of HAV infection.

Adult↗
PubMed1978

Hazardous solid waste from agriculture.

Large quantities of food processing, crop, forestry, and animal solid wastes are generated in the United States each year. The major components of these wastes are biodegradable. However, they also contain components such as nitrogen, human and animal pathogens, medicinals, feed additives, salts, and certain metals, that under uncontrolled conditions can be detrimental to aquatic, plant, animal, or human life. The most common method of disposal of these wastes is application to the land. Thus the major pathways for transmission of hazards are from and through the soil. Use of these wastes as animal feed also can be a pathway. While at this time there are no crises associated with hazardous materials in agricultural solid wastes, the potential for problems should not be underestimated. Manpower and financial support should be provided to obtain more detailed information in this area, esepcially to better delineate transport and dispersal and to determine and evaluate risks.

Agriculture↗
PubMed2006

Dry anaerobic digestion of differently sorted organic municipal solid waste: a full-scale experience.

This paper presents a comparison of dry anaerobic digestion reactors fed with differently sorted municipal organic solid wastes. One reactor was fed with source sorted organic wastes and a second reactor was fed with mixed organic wastes consisting of grey wastes, mechanically selected municipal solid wastes and sludge. The two reactors utilised the same process (Valorga) and operational conditions at full scale. The results of the study emphasise the influence of the kind of treated material on the process performances, especially in terms of biogas and methane production, thus, energy reclamation. The reactor treating the source sorted organic waste and the reactor treating the mixed organic wastes generated some 200 m3 and 60 m3 of biogas per ton of waste treated, respectively, while the specific methane production was some 0.40 and 0.13 m3CH4/kgTVS, respectively. The mass balance and the final fate of the digested material from the two reactors were also clearly different. As for the costs, these were some 29 Euro per ton of treated waste (50% for personnel) and 53 Euro/ton for disposing of the rejected materials. Incomes were some 100 Euro/ton (on average) and an other 15 Euro/ton came from green certificates. The initial investment was 16 million Euros.

Anaerobiosis↗
PubMed2002

Modelling for environmental assessment of municipal solid waste landfills (part II: biodegradation).

The biodegradation module of a simulation program for municipal solid waste landfills (MODUELO) was developed. The biodegradation module carries out the balance of organic material starting with the results of the hydrologic simulation and the waste composition. It simulates the biologic reactions of hydrolysis of solids and the gasification of the dissolved biodegradable material. The results of this module are: organic matter (COD, BOD and elemental components such as carbon, hydrogen, nitrogen, oxygen, sulfur and ash), ammonium nitrogen generated with the gas and transported by the leachates and the potential rates of methane and carbon dioxide generation. The model was calibrated by using the general tendency curves of the pollutants recorded in municipal solid waste landfills, fitting the first part of them to available landfill data. Although the results show some agreement, further work is being done to make MODUELO a useful tool for real landfill simulation.

Biodegradation, Environmental↗
PubMed2003

Community modelling: a tool for correlating estimates of exposure with perception of odour from municipal solid waste (MSW) landfills.

Odours from municipal solid waste landfills have the potential to cause significant annoyance and impact to amenity in the environment surrounding sites. In order to assess the impact of odorous emissions on surrounding communities a quantitative model to predict annoyance was developed. The overall objective of this research was to develop the major components of the model namely, assessment of odorous emissions, dispersion and reception by the surrounding community around the landfill site. This study used community modelling as a tool to find a link between dispersion and perception of odour. The research completed a year-round monitoring program engaging people within the local community as regular odour monitors. Estimates of exposure from dispersion analysis were used to compare incidents causing complaint and intensity-concentration plots were fitted for each monitor whose reports were found to be logically consistent with regard to the intensity scaling. Human responses to the vast range of odour intensities, from highly intense source odours through to less intense dispersed odours at monitors' locations, were found to differ greatly. It was observed that the psychophysical models based on the Weber-Fechner law and Power law fitted the data consistently well for the entire range of the intensity scale used, 1-7. However, the other two models, based on Beidler's law and Laffort's equation showed an inconsistency with the intensity scales >3.

Air Movements↗
PubMed2002

Vitrification of fly ash from municipal solid waste incinerator.

Fly ash from municipal solid wastes (MSW) incinerators in Korea contains a large amount of toxic materials and requires pertinent treatments. However, since fly ash in Korea has a high chlorine concentration, it is difficult to apply cementation and chemical treatment techniques. In this study, we report the vitrification of fly ash along with the properties of the glasses and leaching characteristics of heavy metal ions. Fly ash can be vitrified by melting at 1500 degrees C for 30 min with the addition of >5 wt.% of SiO2. Glasses showed Vickers hardness of 4000-5000 MPa, bending strength of 60-90 MPa and indentation fracture toughness of approximately 0.9 MPa m(1/2). Glasses also showed the excellent resistance against leaching of heavy metal ions with Cd2+ <0.04 ppm, Cr3+ <0.02 ppm, Cu2+ <0.04 ppm and Pb2+ <0.2 ppm. These results indicate that the vitrification technique is effective for the stabilization and recycling of toxic incinerator fly ash.

Chemical Phenomena↗