Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “PRINTING”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

Biological deinking of inkjet-printed paper using Vibrio alginolyticus and its enzymes.

Recycling of office waste paper (photocopy, inkjet, and laser prints) is a major problem due to difficulty in removal of nonimpact ink. Biological deinking of office waste paper is reported using several microorganisms and their enzymes. We report here deinking and decolorization of the dislodged ink particles from inkjet printed paper pulp by a marine bacterium, Vibrio alginolyticus isolate no. NIO/DI/32, obtained from marine sediments. Decolorization of this pulp was achieved within 72 h by growing the bacterium in the pulp of 3-6% consistency suspended in seawater. Immobilized bacterial cells in sodium alginate beads were also able to decolorize this pulp within 72 h. The cell-free culture supernatant of the bacterium grown in nutrient broth was not effective in deinking. However, when the culture was grown in nutrient broth supplemented with starch or Tween 80, the cell-free culture supernatant could effectively deink and decolorize inkjet-printed paper pulp within 72 h at 30 degrees C. The culture supernatant of V. alginolyticus grown in the presence of starch or Tween 80 showed 49 U ml(-1) and 33 U ml(-1) amylase and lipase activities, respectively. Dialysis of these culture supernatants through 10 kDa cut-off membrane resulted in a 35-40% reduction in their efficiency in decolorizing the pulp. It appears that amylase and lipase effectively help in dislodging the ink particles from the inkjet printed-paper pulp. We hypothesize that the bacterium might be inducing the formation of low molecular weight free radicals in the culture medium, which might be responsible for decolorization of the pulp.

Amylases↗

Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants.

A key requirement for three-dimensional printing (3-DP) of medical implants is the availability of printable and biocompatible powder-binder systems. In this study we developed a powder mixture comprising tetracalcium phosphate (TTCP) as reactive component and beta-tricalcium phosphate (beta-TCP) or calcium sulfate as biodegradable fillers, which can be printed with an aqueous citric acid solution. The potential of this material combination was demonstrated printing various devices with intersecting channels and filigree structures. Two post-processing procedures, a sintering and a polymer infiltration process were established to substantially improve the mechanical properties of the printed devices. Preliminary examinations on relevant application properties including in vitro cytocompatibility testing indicate that the new powder-binder system represents an efficient approach to patient specific ceramic bone substitutes and scaffolds for bone tissue engineering.

3T3 Cells↗

Localization of fruit tree viruses by immuno-tissue printing in infected shoots of Malus sp. and Prunus sp.

Immuno-tissue printing protocols for the localization of apple chlorotic leaf spot virus (ACLSV), stem grooving virus (SGV) and plum pox virus (PPV) in shoots of Prunus and Malus in vitro have been established for routine diagnosis in a virus elimination program. Since these viruses belong to different virus genera, the protocols were adapted according to the properties of the virus under investigation. Accumulation of ACLSV was highest in the base of the stem and decreased towards the apex of the shoots. ACLSV was found in the epidermis, the cortex, in the vascular bundles, but seldom in the pith tissue of in vitro apple shoots. ACLSV immuno-tissue printing was as sensitive as ELISA and the intensity of color signals in immuno-tissue prints correlated with absorbance values by two-step ELISA. SGV could be detected by immuno-tissue prints at infectivity levels, where it reacted negative in ELISA. SGV accumulated in the vascular bundles, occurred locally in the parenchymatic tissue, was found in high amounts in young leaves near the meristem, but not within the meristem. PPV was detected in all tissue types of stem sections with an irregular pattern reflecting the in vivo situation causing problems with detection. Discrimination of poorly and heavily infected shoots was possible with the naked eye.

Culture Techniques↗

A glucose sensor fabricated by the screen printing technique.

A novel glucose sensor employing ferrocene-modified glucose oxidase is fabricated using the screen printing technique. Glucose oxidase is covalently bound to the electron mediator ferrocenecarboxylic acid in order to obtain higher enzyme activity. The ferrocene-glucose oxidase shows an increased catalytic current because the ferrocene acts as an electron transfer relay between the active centre of the enzyme and the gold electrode. Glucose sensors employing enzymes modified with ferrocene in various ways are successfully fabricated using the screen printing technique. The ink component containing the ferrocene-glucose oxidase is specially developed to be applicable to the printing machine. The printed glucose sensor chip offers a stable calibration profile and stable electrochemical properties.

Biosensing Techniques↗

Inkjet printing of viable mammalian cells.

The purpose of this study was to explore the use of a commercial thermal printer to deposit Chinese Hamster Ovary (CHO) and embryonic motoneuron cells into pre-defined patterns. These experiments were undertaken to verify the biocompatibility of thermal inkjet printing of mammalian cells and the ability to assemble them into viable constructs. Using a modified Hewlett Packard (HP) 550C computer printer and an HP 51626a ink cartridge, CHO cells and rat embryonic motoneurons were suspended separately in a concentrated phosphate buffered saline solution (3 x). The cells were subsequently printed as a kind of "ink" onto several "bio-papers" made from soy agar and collagen gel. The appearance of the CHO cells and motoneurons on the bio-papers indicated an healthy cell morphology. Furthermore, the analyses of the CHO cell viability showed that less than 8% of the cells were lysed during printing. These data indicate that mammalian cells can be effectively delivered by a modified thermal inkjet printer onto biological substrates and that they retain their ability to function. The computer-aided inkjet printing of viable mammalian cells holds potential for creating living tissue analogs, and may eventually lead to the construction of engineered human organs.

Animals↗

Fabrication of poly(dimethylsiloxane) microfluidic system based on masters directly printed with an office laser printer.

Applications of poly(dimethylsiloxane) (PDMS)-based microfluidic systems are more popular nowadays. Previous fabrication methods of the masters for PDMS microchannels require complicated steps and/or special device. In this paper, we demonstrated that the toner printed on the transparency film with the office laser printer (1200 dpi) can be used as the positive relief of the masters. The transparency film was printed in two steps in order to obtain the same printing quality for the crossed lines. With the laser-printed master, the depth of the fabricated PDMS microchannels was ca. 10 microm and the smallest width was ca. 60 microm. Surface characteristics of the PDMS/PDMS microchannels were performed with SEM. Their electrokinetic properties were investigated by the aids of the measurement of electroosmotic flow (EOF) and the Ohm's curve. Using the PDMS/PDMS microchip CE systems, electroactive biological molecules and non-electroactive inorganic ions were well separated, respectively. This simple approach could make it easy to carry out the studies of PDMS microfluidic systems in more general labs without special devices.

Dimethylpolysiloxanes↗

Preliminary study of post mortem identification using lip prints.

Identification using lip prints was first performed in the 1950s and was the subject of much research in the 1960s and 70s, leading to the acceptance of this technique as evidence in the criminal justice system. Previous research has focused on identifying lip print types or on methods of obtaining hidden lip prints left at the crime scene. The present study aimed to clarify characteristics of lip prints from cadavers with various causes of death (including drowning and hanging) and to determine the effects of fixation on post mortem changes in lip impressions.

Adult↗

Effects of multimedia with printed nursing guide in education on self-efficacy and functional activity and hospitalization in patients with hip replacement.

This study aimed to examine the effects of multimedia with printed nursing guides in patient education on the improvement of self-efficacy, functional activity and length of hospitalization in patients with hip replacement. A quasi-experimental design was used. Control group received a routine care, whereas experimental group was given the multimedia with printed nursing guides. In the multimedia, CD is a collection of nursing instructions in the format of multimedia such as video and audio recorded into a CD. The result showed there are statistically different between experimental and control groups on self-efficacy (t = -7.93, P < 0.001), functional activities (t = 4.33, P < 0.001), and length of hospitalization (t = 2.54, P < 0.05). The findings indicated experimental group achieved higher self-efficacy with the help of multimedia with printed nursing guides. Control group needed more assistance in performing functional activities. Length of hospitalization was significantly shorter in experimental group than in control group. To better adapt to continual human resource reduction and to improve nursing service quality, wider applications of multimedia with printed nursing guides in patient education may be worthwhile.

Activities of Daily Living↗

Fate of bromine in pyrolysis of printed circuit board wastes.

Behavior of Br in pyrolysis of the printed circuit board waste with valuable copper and oil recycling has been studied in the present work. Experimentally, pyrolysis of the printed circuit board waste generated approximately 40.6% of oils, 24.9% of noncondensible gases and 34.5% of solid residues that enriched in copper (90-95%). The cuts of the oils produced from pyrolysis of the printed circuit board waste into weighted boiling fraction were primarily light naphtha and heavy gas oil. Approximately 72.3% of total Br in the printed circuit board waste were found in product gas mainly as HBr and bromobenzene. However, by extended X-ray absorption fine structural (EXAFS) spectroscopy, Cu-O and Cu-(O)-Cu species with bond distance of 1.87 and 2.95 A, respectively, were observed in the solid residues. Essentially, no Cu-Br species was found.

Bromine↗

Preferential glial cell attachment to microcontact printed surfaces.

Microcontact printing is introduced as a method for fabricating test surfaces for attachment of cells to chemically patterned silicon surfaces. Tests with astroglial cells indicate that cells attach to microcontact printed surfaces similarly to surfaces produced by traditional photolithographic methods. Astroglial cells attach selectively to 50 microns wide bars of N1[3-(Trimethoxysilyl)propyl]diethylenetriamine (DETA) self-assembled monolayers (SAMs) on surfaces prepared using variable width spaces generated from microcontact printing with octadecyltrichlorosilane (OTS) as the ink. Our results demonstrate that microcontact printing provides an effective and rapid method for routine production of patterned self-assembled monolayers that can be used for directing cell attachment and studying cell morphology.

Amines↗

Determination of codeine in urine and drug formulations using a clay-modified screen-printed carbon electrode.

Both flow-injection analysis and square-wave stripping voltammetry were evaluated for the determination of codeine in pharmaceutical formulations using a nontronite clay-modified screen-printed carbon electrode. Compared with a bare screen-printed carbon electrode, the nontronite clay-modified screen-printed carbon electrode exhibited a marked enhancement of the current response of codeine. A linear calibration plot was obtained over the 2.5-45 microM range (correlation coefficient=0.999) in pH 6.0 phosphate buffer solution with a detection limit of 20 nM (S/N=3) by square-wave voltammetry (SWV). While, in flow-injection analysis, the linearity was over 5-120 ng range with a detection limit of 1 ng in 20 microl loop. The nontronite clay-modified screen-printed carbon electrode can be either disposable or reused since the renewal gave a good reproducible surface. Quantitative analysis was performed by the standard addition method for codeine content in both urine and commercially available drugs.

Adult↗

The effect of format modifications and reading comprehension on recall of informed consent information by low-income parents: a comparison of print, video, and computer-based presentations.

A randomized trial comparing the amount of knowledge orally recalled from four different presentations of the same consent information was conducted in a non-clinic sample of 233 low-income parents who displayed a range of reading comprehension skill. The study simulated recruitment of children into one of two actual studies underway at another location: one involved high risk to participants, the other did not. Use of a non-clinic sample controlled for prior knowledge of the conditions, and avoiding discussion of the information further assured that differences in recalled information could be attributed more confidently to the format itself. The formats included the original written forms, enhanced print (simpler language, topic headings, pictures), narrated videotapes, and self-paced PowerPoint presentations via laptop computer with bulleted print information, pictures, and narration. No format-related differences in recalled information were found in the full sample but for the 124 individuals with reading comprehension scores at or below the 8th grade level, the enhanced print version tended to be more effective than either the original form or the video. Across all formats, more information was recalled about the low-risk study. The findings emphasize the necessity for clinicians and researchers to verify understanding of consent information, especially when there is risk of reduced literacy skill. Reliance on video to convey information in preference to well-done print media appeared questionable.

Adult↗

Physical activity interventions using mass media, print media, and information technology.

INTRODUCTION: Media-based physical activity interventions include a variety of print, graphic, audiovisual, and broadcast media programs intended to influence behavior change. New information technology allows print to be delivered in personalized, interactive formats that may enhance efficacy. Media-based interventions have been shaped by conceptual models from health education, Social Cognitive Theory, the Transtheoretical Model, and Social Marketing frameworks. METHODS: We reviewed 28 studies of media-based interventions of which seven were mass media campaigns at the state or national level and the remaining 21 were delivered through health care, the workplace, or in the community. RESULTS: Recall of mass-media messages generally was high, but mass-media campaigns had very little impact on physical activity behavior. Interventions using print and/or telephone were effective in changing behavior in the short term. Studies in which there were more contacts and interventions tailored to the target audience were most effective. CONCLUSION: A key issue for research on media-based physical activity interventions is reaching socially disadvantaged groups for whom access, particularly to new forms of communication technology, may be limited. There is a clear need for controlled trials comparing different forms and intensities of media-based physical activity interventions. Controlled studies of personalized print, interactive computer-mediated programs, and web-based formats for program delivery also are needed. The integration of media-based methods into public and private sector service delivery has much potential for innovation.

Adolescent↗

Prussian Blue based screen printed biosensors with improved characteristics of long-term lifetime and pH stability.

The promising advantages of Prussian Blue (PB) as catalyst and of the thick film screen printing technology have been combined to assemble sensors with improved characteristics for the amperometric determination of H(2)O(2). PB-modified screen printed electrodes were applied to detect H(2)O(2) at an applied potential of -0.05 V versus the internal screen printed Ag pseudoreference electrode, showing a detection limit of 10(-7) mol l(-1), a linearity range from 10(-7) to 5x10(-5) mol l(-1), a sensitivity of 234 microA mmol l(-1) cm(-2), and a high selectivity. Improved stability at alkaline pH values was also observed, which made possible their use with enzymes having an optimum basic pH. Then, the immobilisation of a single enzyme (glucose oxidase (GOD) or choline oxidase (ChOX)) or of two enzymes, acetylcholinesterase (AchE) coimmobilised with ChOX, has been performed on the surface of PB modified screen-printed electrodes (SPEs) using glutaraldehyde and Nafion. ChOX has been selected as an example of enzyme working at alkaline pH. The choline biosensors showed a detection limit of 5x10(-7) mol l(-1), a wide linearity range (5x10(-7)-10(-4) mol l(-1)), a high selectivity and a remarkable long term stability of 9 months at 4 degrees C, and at least 4 weeks at room temperature. Similar analytical characteristics and stability were observed with the acetylcholine biosensors.

Biosensing Techniques↗

High resolution printing of DNA feature on poly(methyl methacrylate) substrates using supramolecular nano-stamping.

In recent years, a large number of devices based on organic and biological materials have been developed. To scale-up the production of these systems to industrially acceptable standards, there is a need to develop soft-material stamping approaches with the needed resolution, complexity, and versatility. We have recently developed a DNA-based stamping method (supramolecular nano-stamping, SuNS) that has superior resolution and can print multiple molecules at the same time. A similar technique was independently developed by Crooks and co-workers. Here we show that SuNS can be used to efficiently print DNA features on a polymeric substrate (poly(methyl methacrylate), PMMA) with a 40 nm point resolution and a coverage that exceeds 100 mum2. The stamped PMMA substrate was also used as a master to print on a gold substrate. With PMMA being optically clear and electrically insulating, future applications of SuNS to print DNA micro- and nanoarrays are envisioned.

DNA, Single-Stranded↗

Permeation of oxygen, water vapor, and limonene through printed and unprinted biaxially oriented polypropylene films.

Oriented polypropylene (OPP) and coated OPP (acrylic/OPP/PVDC) films were printed with two commercially available inks to investigate the influence of inks on water vapor and oxygen transmission rates. The permeation of an aroma compound (d-limonene) through coated OPP film printed with these inks was also evaluated at 35 degrees C and 100% relative humidity. The water vapor transmission rate increased significantly through OPP film printed with nitrocellulose-based ink. The oxygen transmission rate was significantly lower through both OPP and coated OPP films printed with the nitrocellulose ink. The effect of inks on limonene permeation was minor compared to the marked increase in permeation measured when the PVDC side of the coated film was exposed to the aroma, compared to the acrylic side. Scanning electron micrographs of coated film cross sections revealed changes in film structure upon exposure to limonene vapors, which were most pronounced when the PVDC side was exposed to limonene.

Biofilms↗

Positive microcontact printing with mercaptoalkyloligo(ethylene glycol)s.

The soft lithographic replication of patterns with a low filling ratio by microcontact printing (microCP) is problematic due to the poor mechanical stability of common elastomeric stamps. A recently described strategy to avoid this problem employs a modified patterning method, positive microcontact printing ((+)microCP), in which a stamp with a mechanically more stable inverted relief pattern is used. In contrast to conventional negative microCP ((-)microCP), in the contact areas a self-assembled monolayer (SAM) is printed of a "positive ink", which provides only minor etch protection, whereas the noncontacted areas are subsequently covered with a different, etch-resistant SAM, prior to development by chemical etching. With the aim to identify novel, highly versatile positive inks, the patterning of gold by (+)microCP with mercaptoalkyloligo(ethylene glycol)s (MAOEGs), the subsequent adsorption of octadecanethiol (ODT), and the final development by wet chemical etching have now been studied. A polydisperse mixture of mercaptoundecylocta(ethylene glycol) derivatives was found to provide the best patterning results. The surface spreading of the positive ink during stamping, the exchange of printed MAOEGs with ODT, and the choice of the right etching bath were identified as key parameters that influence the achievable pattern resolution and contrast. Due to the modular composition of functionalized alkyloligo(ethylene glycol) derivatives, (+)microCP with these positive inks has the potential for easy adaptation to a variety of materials and development conditions.

Ethylene Glycols↗

Nanoscopic Pd line arrays using nanocontact printed dendrimers.

High-density Pd line arrays with 55 nm line-width were obtained using nanocontact-printed dendrimer monolayers. Elastomeric PDMS stamps for nanocontact printing were replicated from silicon master molds which were fabricated by UV nanoimprinting in combination with reactive ion etching. The fabrication method effectively controlled the aspect ratios of high-density lines for resolving the problems encountered in both replicating silicon masters to PDMS stamps and printing with the replicated PDMS stamps. Using the PDMS nanostamp with an optimized aspect ratio, a self-assembled monolayer of dendrimer was patterned on a Pd film via nanocontact printing, which was facilitated by the strong interaction between Pd and amine groups of the dendrimer. The patterned self-assembled monolayer was used as an etch-resist mask against the wet etchant of Pd, leaving behind a high-density Pd line array over large areas. The resulting functional Pd nanopattern is of practical significance in microelectronics and bio- or gas-sensing devices.

Journal Article↗