Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “MCM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
PubMed1997

Loading of an Mcm protein onto DNA replication origins is regulated by Cdc6p and CDKs.

In eukaryotic cells, firing of DNA replication origins normally does not recur until after M phase. This characteristic is thought to be due to the properties of "initiation" proteins like Orc, Cdc6, and Mcms. Using formaldehyde cross-linking, we show that Cdc6p and Mcm7p associate specifically with replication origins during G1 but not during G2 in S. cerevisiae. Mcm7p's association with origins depends on Cdc6p. Ectopic expression of Cdc6p enables it to associate with origins during G2, but this fails to recruit Mcm7p. Our data suggest that the loading of Mcm proteins onto origins is regulated by two mechanisms: first, by Cdc6p occupancy, and second, by S- and M-CDKs, whose activity during S, G2, and M phases prevents Mcm loading.

Binding Sites↗
PubMed2003

Electron radiation damage of MCM-41 and related materials.

The article compares the relative stability of MCM-41 and related mesoporous materials in electron beam at an accelerating voltage of 100-300 kV. The work encountered in electron microscopy presents a comparison with similar research that has been carried out on nonporous and microporous silicates, especially alpha-quartz and zeolite Y. The trends in stability are analyzed, classifying the effects of sample preparation, organic and inorganic moieties, and electron accelerating voltage on beam stability. A higher synthesis temperature, the use of an acid catalyst in the synthesis, and the presence of additional organic or inorganic material within the channels were all found to stabilize these materials. The dose required to completely disrupt the structure increased with accelerating voltage for nearly all samples, suggesting a primarily radiolytic damage mechanism. The exception, MCM-41 containing nanometer-sized titania particles in its channels, was found to be almost insensitive to accelerating voltage.

Catalysis↗
PubMed2004

Preparation, characterization, and condensation of copper tellurolate clusters in the pores of periodic mesoporous silica MCM-41.

The copper-tellurolate cluster [(Cu(6)(TePh)(6)(PPh(2)Et)(5)] has been loaded into the pores of MCM-41 by solid-state impregnation techniques. It was found that the best loading conditions are 110 degrees C and 10(-)(3) Torr static vacuum. The resulting material was analyzed by powder X-ray diffraction (PXRD), nitrogen adsorption isotherms, thermogravimetric analysis (TGA), (31)P CP MAS NMR spectroscopy, and TEM. It was observed that loading is accompanied by loss of the phosphine shell, with retention of the copper-tellurium core. Condensation of the impregnated material may proceed thermally or photochemically. Thermal condensation results in the formation of Cu(2)Te nanoparticles as demonstrated by PXRD, and TEM data suggests that the process has taken place inside the pores of MCM-41. Photochemical condensation yields larger metal-chalcogen clusters in the pores as suggested by the result of UV-vis diffuse reflectance spectroscopy and TEM measurements.

Journal Article↗
PubMed2002

Role of framework sodium versus local framework structure in determining the hydrothermal stability of MCM-41 mesostructures.

Two mesostructured MCM-41 silicas that differ dramatically in hydrothermal stability have been examined by (29)Si MAS NMR spectroscopy and pair distribution function (PDF) analysis of synchrotron X-ray scattering data. The less stable mesostructure assembled from sodium silicate and the substantially more stable derivative made from fumed silica possess equivalent local framework wall structures, as judged by NMR and PDF methods. Approximately 80% of the SiO(4) tetrahedra are fully cross-linked as Q(4) (Si(OSi)(4)) units in both calcined samples. Additionally, the structural correlation distances for the two materials are nearly identical, having values of 1.62(1), approximately 2.60, and 3.09(1) A for the Si-O, O-O, and nearest neighbor Si-Si distances in the framework. Sodium ions in the framework play a crucial role in limiting the hydrothermal stability of the mesostructure. Residual sodium ( approximately 0.05-0.10% Na(2)O) is retained in the MCM-41 made from sodium silicate, even after two ion exchange reactions with ammonium ions in more than 300 - fold excess. The entrapped framework sodium ions catalyze the collapse of the mesopores upon exposure to 20% steam at 800 degrees C for 5 h. The sodium - free mesostructure assembled from fumed silica retains an open framework under the same hydrothermal conditions. The stability of the fumed silica derivative, however, is greatly compromised when doped with as little as 0.10% Na(2)O, thus confirming the deleterious effect of sodium on hydrothermal stability.

Journal Article↗
PubMed2005

Photochemical CO2 splitting by metal-to-metal charge-transfer excitation in mesoporous ZrCu(I)-MCM-41 silicate sieve.

Binuclear redox sites consisting of a Zr oxo-bridged to a Cu(I) center have been obtained on the pore surface of MCM-41 silicate sieve by a stepwise grafting procedure, along with isolated metal centers. The bimetallic site features a Zr(IV)-O-Cu(I) to Zr(III)-O-Cu(II) metal-to-metal charge-transfer (MMCT) absorption extending from the UV region to about 500 nm. The Zr-O-Cu linkage is revealed by a Cu(I)-O infrared stretch mode at 643 cm-1. Irradiation of the MMCT chromophore of ZrCu(I)-MCM-41 loaded with 1 atm of CO2 gas at room temperature resulted in growth of CO (2150 cm-1) and H2O (1600 cm-1). Photolysis experiments using 13CO2 and C18O2 demonstrate that carbon monoxide and the oxygen atom of the water product originate from CO2. This indicates splitting of the CO2 by the excited MMCT moiety to CO and a surface OH radical, followed by trapping of the products at Cu(I) centers (OH is reduced to H2O). This is the first observation of CO2 photoreduction at a binuclear MMCT site at the gas-solid interface.

Journal Article↗
PubMed2005

NMR study of the adsorption-desorption kinetics of dissolved tetraalanine in MCM-41 mesoporous material.

In this study we show how deuterium magic-angle spinning NMR spectroscopy can be used to investigate the adsorption-desorption kinetics of molecules in solution at surface-liquid interfaces. An aqueous solution of deuterium-labeled tetraalanine is inserted in the pores of MCM-41 mesoporous material, and its 2H MAS NMR spectrum is measured as a function of temperature and fraction of filling of the pores. Prior to this study, the different types of water in MCM-41 are characterized as a function of water loading of the pores. Analysis of 2H MAS sideband line shapes enabled the determination of the adsorption and desorption rates and the activation energies of desorption.

Adsorption↗
PubMed2005

EPR spectroscopy of Cu(I)-NO adsorption complexes formed over Cu-ZSM-5 and Cu-MCM-22 zeolites.

The Cu(I)-NO adsorption complexes were formed over copper exchanged and autoreduced high siliceous Cu-ZSM-5 and Cu-MCM-22 zeolites and studied by EPR spectroscopy at X-, Q-, and W-band frequencies. The spin Hamiltonian parameters of the Cu(I)-NO species are indicative of a nitrogen-centered radical complex with a bent geometry and a significant contribution of the Cu(I) 4s atomic orbital to the wave function of the unpaired electron. Two different Cu(I)-NO species were found in both zeolites. It has been confirmed by comparing the experimental data with the results of previous theoretical studies that the presence of two different species is due to the formation of Cu(I)-NO adsorption complexes from two different Cu(I) sites in the zeolite matrix with different numbers of oxygen coligands. The structure of the two sites in the Cu-ZSM-5 and Cu-MCM-22 zeolites must be similar as the spin Hamiltonian parameters are found to be almost independent of the zeolite matrix, where the Cu(I)-NO complex is formed. The EPR signal intensity of the Cu(I)-NO species was studied as a function of the NO loading, and the formation of diamagnetic Cu(I)-(NO)(2) species with rising NO pressure at the expense of paramagnetic Cu(I)-NO monomers could be demonstrated for both systems at low temperatures.

Adsorption↗
PubMed2005

Modification of MCM-48-, SBA-15-, MCF-, and MSU-type mesoporous silicas with transition metal oxides using the molecular designed dispersion method.

Four various mesoporous silicas (MCM-48, SBA-15, MCF, and MSU) were modified by the molecular designed dispersion method using Fe(acac)3, Cr(acac)3, and Cu(acac)2 complexes. The deposition was performed at the same concentration of the metal acetylacetonate (acac) complex in a toluene solution. All as-synthesized samples were investigated by diffuse reflectance infrared Fourier transform spectroscopy, Fourier transform infrared photoacoustic spectroscopy, and thermogravimetric analysis. The calcined materials were studied with respect to their textural properties (Brunauer-Emmett-Teller adsorption isotherm) and chemical composition (electron microprobe analysis). It allowed elucidation of the mechanism of interaction between the acac complex and the silanol groups. For the MCM-48, SBA-15, and MCF materials, the formation of hydrogen bonding was found for the chromium- and copper-modified samples, whereas the Fe-containing materials showed the ligand exchange mechanism. The strong interaction of the MSU support and the different acetylacetonate complexes, resulting in a loss of at least one acac ligand, was observed. The mesoporous silicas modified with transition metal oxides were studied by UV-vis-DR spectroscopy. The different metal dispersions were found for the samples containing various transition metal oxides.

Journal Article↗
PubMed2005

Optical spectra of a novel polyoxometalate occluded within modified MCM-41.

The novel polyoxometalate ([(Eu2PW10O38)4(W3O8(H2O)2(OH)4)]22-), also referred to herein as Eu8P4W43, has been immobilized inside the channels of MCM-41 mesoporous molecular sieve material by means of the incipient wetness method. For proper host-guest interaction, amine groups were introduced into the system as a result of an aminosilylation procedure. A stable and integrated Eu8P4W43 polyoxometalate was shown to be formed inside the channels of the modified MCM-41. The products were characterized by XRD, UV-vis absorption, emission, Raman excitation, Raman, and 31P solid-state NMR measurements. Infrared and Raman spectra of the polyoxometalate/MCM-41 composite systems are interpreted as showing spectral shifts due to site induced electrostatic interactions. The photoluminescent behavior of the composite at room temperature indicates a characteristic Eu3+ emission pattern corresponding to 5D0- 7F(J) transitions. A strong photoluminescence suggests the potential utility of the polyoxometalate as a luminescent material.

Aluminum Silicates↗
PubMed2006

Characterization of the local structures of Ti-MCM-41 and their photocatalytic reactivity for the decomposition of NO into N2 and O2.

Ti-MCM-41 mesoporous molecular sieves were prepared at ambient temperature and were characterized by X-ray absorption near-edge structure and extended X-ray absorption fine structure, UV-vis, Fourier transform infrared spectroscopy, and photoluminescence spectroscopic analyses. It was found that an increase in the Ti content caused the structure of the Ti-oxides in Ti-MCM-41 to change from an isolated tetrahedral coordination to adjacent Ti-oxide species with Ti4+ of tetrahedral coordination. The photocatalytic reactivity of these catalysts for the decomposition of NO into N2 and O2 was found to strongly depend on the local structure of the Ti-oxide species including their coordination and distribution, i.e., the charge transfer excited state of the highly dispersed isolated tetrahedrally coordinated Ti-oxides act as the active sites for the photocatalytic decomposition of NO into N2 and O2.

Journal Article↗
PubMed2006

Characterization of ZnE (E = S, Se, or Te) materials synthesized using silylated chalcogen reagents in mesoporous MCM-41.

The binary materials ZnS, ZnSe, and ZnTe have been successfully prepared within the mesoporous framework of MCM-41 at room temperature through the use of silylated chalcogen reagents. Postsynthesis grafting of ethylenediamine facilitates the complexation of anhydrous zinc acetate to the pore surface via a ligand exchange process between monodentate 3,5-lutidine ligands and the anchored chelating moiety. Coordinated zinc acetate readily reacts with E(SiMe(3))(2) (E = S, Se, or Te), thereby encapsulating zinc chalcogenides in the mesoporous channels. ZnE-MCM-41 materials have been characterized by EDX analysis, nitrogen sorption analysis, and Raman, UV-vis, and solid-state NMR spectroscopy. The observed blue shift in the absorption maximum is in agreement with the expected quantum confinement of these materials given the nanometer dimensions of the mesoporous architecture of the silicate host.

Journal Article↗
PubMed2004

Enhanced electrorheology of conducting polyaniline confined in MCM-41 channels.

A composite material of a silica-based mesoporous molecular sieve, MCM-41, with conducting polyaniline (PANI) inside the uniformly aligned one-dimensional channels (PANI/MCM-41) was prepared and its nanocomposite formation was confirmed through an electrical conductivity measurement. This nanocomposite particle was adopted for a dispersed phase in electrorheological (ER) fluids, and the ER property was measured using a Couette-type rotational rheometer equipped with a high voltage generator. Suspension of PANI/MCM-41 showed ER properties more enhanced than those of MCM-41 or PANI alone as a result of the anisotropic polarization of the PANI/MCM-41 nanocomposite.

Aniline Compounds↗
PubMed2004

Study of hexane adsorption in nanoporous MCM-41 silica.

We study here the adsorption of hexane on nanoporous MCM-41 silica at 303,313, and 323 K, for various pore diameters between 2.40 and 4.24 nm. Adsorption equilibria, measured thermogravimetrically, show that all the isotherms, that are somewhat akin to those of type V, exhibit remarkably sharp capillary adsorption phase transition steps and are reversible. The position of the phase transition step gradually shifts from low to high relative pressure with an increase in the temperature as well as the pore sizes. The isosteric heats of adsorption derived from the equilibrium information using the Clapeyron equation reveal a gradual decrease with increasing adsorbed amount because of the surface heterogeneity but approach a constant value near the phase transition. A decrease in the pore size results in an increase in the isosteric heat of adsorption because of the increased dispersion forces. A simple strategy, based on the Broekhoff and De Boer adsorption theory, successfully interprets the hexane adsorption isotherms for the different pore size MCM-41 samples. The parameters of an empirical expression, used to represent the potential of interaction between the adsorbate and adsorbent, are obtained by fitting the monolayer region prior to capillary condensation and the experimental phase transition simultaneously, for some pore sizes. Subsequently, the parameters are used to predict the adsorption isotherm on other pore size samples, which showed good agreement with experimental data.

Journal Article↗
PubMed2005

Adsorption and structure of hydrocarbons in MCM-41: a computational study.

The adsorption of linear, branched, and cyclic hydrocarbons in MCM-41 is studied using Configurational Bias Monte Carlo simulations. A new computational model for MCM-41 is proposed which, although simple, is able to predict adsorption isotherms which are in agreement with the scarce experimental data. The structure of the adsorbed phase is analyzed and found to be similar to that of studies using small, hard spheres trapped in pores. The adsorption of mixtures is investigated, and the adsorption hierarchy is discussed. The structure of the adsorbed mixture is revealed and shows that all components of the mixture exhibit structure, even if they are only adsorbed in small quantities. Finally, the model is modified to include surface roughness and the effect on the adsorption isotherms and structure of the adsorbed phase is discussed.

Journal Article↗
PubMed2005

Improvement of the Derjaguin-Broekhoff-de Boer theory for capillary condensation/evaporation of nitrogen in mesoporous systems and its implications for pore size analysis of MCM-41 silicas and related materials.

In this work, we propose an improvement of the classical Derjaguin-Broekhoff-de Boer (DBdB) theory for capillary condensation/evaporation in mesoporous systems. The primary idea of this improvement is to employ the Gibbs-Tolman-Koenig-Buff equation to predict the surface tension changes in mesopores. In addition, the statistical film thickness (so-called t-curve) evaluated accurately on the basis of the adsorption isotherms measured for the MCM-41 materials is used instead of the originally proposed t-curve (to take into account the excess of the chemical potential due to the surface forces). It is shown that the aforementioned modifications of the original DBdB theory have significant implications for the pore size analysis of mesoporous solids. To verify our improvement of the DBdB pore size analysis method (IDBdB), a series of the calcined MCM-41 samples, which are well-defined materials with hexagonally ordered cylindrical mesopores, were used for the evaluation of the pore size distributions. The correlation of the IDBdB method with the empirically calibrated Kruk-Jaroniec-Sayari (KJS) relationship is very good in the range of small mesopores. So, a major advantage of the IDBdB method is its applicability for small mesopores as well as for the mesopore range beyond that established by the KJS calibration, i.e., for mesopore radii greater than approximately 4.5 nm. The comparison of the IDBdB results with experimental data reported by Kruk and Jaroniec for capillary condensation/evaporation as well as with the results from nonlocal density functional theory developed by Neimark et al. clearly justifies our approach. Note that the proposed improvement of the classical DBdB method preserves its original simplicity and simultaneously ensures a significant improvement of the pore size analysis, which is confirmed by the independent estimation of the mean pore size by the powder X-ray diffraction method.

Journal Article↗
PubMed2004

CO2 adsorption over Si-MCM-41 materials having basic sites created by postmodification with La2O3.

Moderate basic sites could be created onto mesoporous Si-MCM-41 materials by postsynthesis modification with highly dispersed La2O3. The La2O3-modified MCM-41 materials (designated here as LaM) have been characterized by Fourier transform infrared spectroscopy, temperature-programmed desorption, X-ray photoelectron spectroscopy, X-ray diffraction (XRD), and N2 adsorption/desorption and have been tested as model adsorbents for CO2 adsorption. XRD and N2 adsorption results showed that all LaM materials still maintained their uniform hexagonal mesoporous structure even after postsynthesis modification with La2O3 loading up to 20 wt %. Although the surface area, pore size, and pore volume of LaM materials decreased with increasing La2O3 loading, their capacity for CO2 storage could be significantly improved when La2O3 loading was increased from 0 to 10 wt %. Unidentate and bidentate carbonates have been identified by in situ FTIR as the two types of CO2 species adsorbed on LaM surface. The LaM material also possesses good thermal stability, allowing the model adsorbent to be regenerated at high temperature and recyclable.

Adsorption↗
PubMed2005

Self-assembly of a metallosupramolecular coordination polyelectrolyte in the pores of SBA-15 and MCM-41 silica.

It is shown that intrinsically stiff chain aggregates of a metallosupramolecular coordination polyelectrolyte (MEPE) can form in the cylindrical nanopores of MCM-41 and SBA-15 silica by self-assembly of its constituents (metal ions and organic ligand). The UV/vis spectra of the resulting MEPE-silica composites exhibit the characteristic metal-to-ligand charge transfer band of the MEPE complex in solution. For the MEPE-silica composite in SBA-15 an iron content of 1.2 wt % was found, corresponding to ca. 10 MEPE chains disposed side by side in the 8 nm wide pores of the SBA-15 matrix. In the case of MCM-41 (pore width < 3 nm), where only one MEPE chain per pore can be accommodated, an iron content of 0.3 wt % was obtained, corresponding to half-filling of the pores. It was also found that MEPE chains spontaneously enter the pores of SBA-15, when a solution of MEPE is exposed to the silica matrix.

Journal Article↗
PubMed2006

Heats of adsorption and adsorption heterogeneity for methane, ethane, and carbon dioxide in MCM-41.

We report the adsorption isotherms and the isosteric heats of adsorption of pure methane, ethane, and CO2 and a mixture of methane and CO2 in the periodic mesoporous silica MCM-41 using a multicomponent adsorption calorimeter of the Tian-Calvet type, looking in particular at the degree of heterogeneity in the adsorption of these species. The adsorption of methane and ethane in MCM-41 was found to be essentially homogeneous, while the adsorption of pure CO2 and of CO2 from a CO2/methane mixture was found to be significantly heterogeneous, reflecting the electrostatic interactions between CO2 and the adsorbent.

Journal Article↗