Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “HUMIDITY”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
PubMed1984

Inspired humidity in anaesthesia breathing circuits: comparison and examination of effect of Revell circulator.

Humidity levels of respired gases in spontaneously breathing patients were measured with a quadrupole mass spectrometer (Medishield Model MS-2) and compared between various anaesthetic systems during clinical anaesthesia. In studies of high flow rebreathing non-absorption systems the mean inspired absolute humidity averaged approximately 16 mg X l-1 (range 14.7 to 16.1 mg X l-1) compared to a semiclosed circle absorption system (BOC MK III) in which values for absolute humidity varied from 6.8 +/- 5.1 mg X l-1 for children through 9.5 +/- 3.0 mg X l-1 for adults), and the closed circle absorption system in which values of 20.5 +/- 2.3 mg X l-1 were only gradually reached. Addition of a functioning Revell circulator to the circle absorption system provided immediately markedly higher levels of inspired humidity during clinical use, either semiclosed (15.4 +/- 5.1 mg X l-1 in children to 18.8 +/- 2.4 mg X l-1 in adults), or closed (23.3 +/- 1.8 mg X l-1 in adults). These markedly higher inspired levels of absolute humidity were attained during forced circulation of respired gas provided by the Revell circulator without the concomitant disadvantages of rebreathing or the potential hazards associated with some humidifying devices.

Adult↗
PubMed1976

pH, temperature, humidity and the dynamic force-area curve of dipalmitoyl lecithin.

Both high pH at 25 degrees C and humidity at 37 degrees C prevent DPL films from attaining zero surface tension, whereas humidity at 25 degrees C and high pH at 37 degrees C do not. At 37 degrees C DPL lowered surface tension to zero when spread from organic solvent or when absorbed from aqueous 0.15 M NaCl in the surface balance in which the surface film was exposed to the room air (dry film). Upon saturation of the atmosphere with water vapor in equilibrium with the aqueous phase at 37 degrees C in a closed chamber, DPL lost the ability to produce zero surface tension, and the gamma min of the DPL film increased from zero to 22 dyne/cm. Addition of DPL in chloroform to distilled water before dispersion by sonication did not prevent the effect of the humidity. However, when the chloroform solution of DPL was added to 0.15 M NaCl before sonication, the adsorbed film produced immediately a stable gamma min of zero in a saturated atmosphere, 37 degrees C. In the absence of chloroform, with DPL adsorbed from either distilled water or 0.15 M NaCl, the effect of humidity was reversed either by removing the chamber and returning the wet film to room air or by introducing small quantities of dispersing agents such as cholesteryl palmitate. However, whereas the effect of humidifying the air was reversible indefinitely, the effect of cholesteryl palmitate (zero surface tension, wet or dry film) was irreversible. This means that there are substances or conditions that can assist DPL films in maintaining zero surface tension when such films are exposed to humidity-saturated air at 37 degrees C.

Humidity↗
PubMed1995

Influence of humidity on dimensional stability of a range of ion-leachable cements.

The dimensional changes of a variety of dental restorative materials, occurring during and after setting, were investigated. The materials were tested under four different environmental conditions: 25 degrees C at laboratory humidity, 25 degrees C at 100% humidity, 37 degrees C at laboratory humidity and 37 degrees C at 100% humidity. Two materials setting by an acid-base reaction were also examined when protected with both a conventional varnish and a low-viscosity light-curable resin. The dimensional changes were recorded continuously using linear variable displacement transducers (LVDTs) over periods of up to 2 h. The materials investigated showed varying magnitudes of dimensional change. The shrinkage of conventional glass-ionomer cements (Fuji II and Opusfil) were the highest at 37 degrees C in air. This was attributed to the highest rate of water loss in the most desiccating environment. The shrinkage observed for the materials which set, even only in part, by a polymerization reaction will probably be due to the water loss and/or polymerization shrinkage. Exposure of these materials to a high-humidity environment reduced the shrinkage because of the swelling associated with water absorption. Application of the varnish and the protective resin over the cement surfaces also reduced shrinkage in Fuji II due to prevention of water exchange. The apparatus used in this study provided a simple and reliable method for measuring linear dimensional change. Data obtained in this study were comparable, where appropriate, to the values found in the literature.

Absorption↗
PubMed1994

Intraoral humidity during operative procedures.

Results of dentine adhesion studies are influenced by many factors such as intrinsic and extrinsic dentine wetness. Relative air humidity and temperature are extrinsic environmental factors whose influence on dentine bonding capability is not precisely known. It was the aim of this study to gain an understanding of these factors as present in the mouths of patients and as influenced by several variables. In six different experiments the influence of application of a rubber dam, high and low relative humidity in the dental surgery, nose and mouth breathing and tooth drying was investigated. The results show that without application of a rubber dam there was no statistically significant difference in temperature for the variables nose and mouth breathing and tooth drying (mean 27.7 +/- 1.5 degrees C). Only the difference in relative air humidity of the dental surgery was statistically significant. With the application of a rubber dam the relative air humidity and temperature were essentially the same as the dental surgery conditions. It is concluded that without rubber dam the intraoral environment in which bonding procedures are to be performed is comparable with a high humidity climate such as that of Central Africa or the South Pacific.

Analysis of Variance↗
PubMed2026

Balancing growth and immunity of potato by humidity-dependent expression of a late blight resistance gene.

Inducible expression of resistance genes is an effective approach to balance plant growth and immunity, thus facilitating the development of disease-resistant crop cultivars. While pathogen-responsive and immunity-related promoters have been adopted for this purpose, alternative design strategies remain to be explored. High relative humidity (RH) has been recognized as a crucial permissive environmental condition for the occurrence of devastating plant diseases including tomato and potato late blight. Here, we identified humidity-activated cis-regulatory elements (HAEs) in Solanum lycopersicum through an integrative analysis of transcriptomics and chromatin accessibility data. Sequence homology-inferred HAEs in S. tuberosum can predict humidity-elicited changes in downstream gene expression. Transgenic S. tuberosum lines expressing a late blight resistance gene driven by an artificial humidity-inducible promoter containing a natural S. tuberosum HAE were generated. These transgenic lines exhibited comparable late blight resistance levels to the lines overexpressing the same resistance gene in controlled zoospore inoculation bioassays, while avoiding growth suppression and tuber yield penalties in common garden experiments. Our findings highlight the importance of plant cis-regulatory elements in the transcriptional responses to high RH and provide a proof-of-concept for a humidity-inducible environment-responsive resistance gene deployment strategy to engineer disease-resistant crop cultivars without compromising growth and yield.

Phytophthora infestans↗
PubMed2005

Effect of relative humidity on germination of ascospores and macroconidia of Gibberella zeae and deoxynivalenol production.

Cereals are frequently infested by mycotoxin-producing fungi such as Gibberella zeae. G. zeae produces sexual spores (ascospores, dispersed by wind) and asexual spores (macroconidia, dispersed by rain droplets) to infect host plants. The production of the mycotoxin deoxynivalenol (DON) and the germination of ascospores and macroconidia of G. zeae were studied at 20 degrees C in relation to relative humidity (RH). The DON contents of wheat heads and autoclaved rice grain samples, artificially inoculated with ascospore or macroconidia suspensions of equal spore density, were determined at 35 days after inoculation by high-performance liquid chromatography (HPLC). The average DON production 35 days after inoculation was much lower on rice (3.95+/-1.34 mg kg(-1)) than on wheat heads (302.30+/-57.46 mg kg(-1)). Macroconidia inoculi produced more DON than ascospore inoculi at relative humidities >90%, but less DON between 53% and 80% RH. At RH < or = 53%, no significant differences in DON production were observed between macroconidia and ascospore inoculi. DON production increased with RH irrespective of spore type. Germination of ascospores and macroconidia was monitored during incubation above six constant humidity solutions ranging from 30% to 93% RH. Ascospores only required a RH > or = 53%, whereas macroconidia required RH of > or = 80% for germination. The different humidity requirements of the two spore types for germination are discussed as a potential reason for the differential DON production of ascospore and macroconidia inoculi in relation to humidity. The results indicate that DON contamination levels partly dependent upon the interaction of spore type and RH and may confer an ecological advantage to G. zeae over other Fusarium head blight pathogens.

Chromatography, High Pressure Liquid↗
PubMed2006

Influence of humidity and setting time on the push-out strength of mineral trioxide aggregate obturations.

The aim of this study is to assess how a wet environment curing affects the retention characteristics of mineral trioxide aggregate (MTA), and also to determine the time needed for curing. MTA obturations were carried out in perforated dentine slices and cured under different conditions (presence or absence of humidity and several time intervals). The obturations were then subjected to an increasing mechanical strength until they were displaced from the perforations. The push-out strength was determined as the ration of the dislodging force to the MTA-dentine contact surface. The influence of the different curing conditions on the push-out strength was then analyzed for statistical significance. Humidity significantly increased the push-out strength of MTA obturations. The effect of curing time depended on humidity: while in the absence of humidity the push-out strength did not increase after 3 days, in the presence of humidity a lengthening of the curing time up to 21 days produced a moderate increase over and above the large initial increase obtained in the first 3 days.

Aluminum Compounds↗
PubMed2005

Production and scavenging of reactive oxygen species in Fagus sylvatica seeds during storage at varied temperature and humidity.

The accumulation of reactive oxygen species (ROS) in seed tissues plays an important role in the loss of seed viability during storage. In the present study, we examined whether the loss of germination capacity and viability of beech (Fagus sylvatica L.) seeds during storage under different temperatures (4, 20 and 30 degrees C) and relative humidity levels (45% and 75% RH) is associated with: (1) an increase in the level of ROS, such as superoxide radical (O2*-), oxygen peroxide (H2O2); and, (2) changes in low molecular antioxidants (ascorbate and glutathione) and enzymatic scavengers such as ascorbate peroxidase dehydroascorbate reductase, glutathione reductase, catalase, superoxide dismutase and guaiacol peroxidase. Beech seeds progressively lost their ability to germinate during 9 weeks of storage under the above conditions. The deleterious effects of temperature treatments increased with growing seed moisture content at higher humidity. The loss of seed viability was correlated with the generation of ROS during storage, which was more intensive at higher temperatures and humidity levels. The ascorbate content significantly increased in seeds stored in all temperature and humidity variants, when the seeds lost the ability to germinate to a large degree. At the same time, glutathione content dramatically decreased, but it was possible to observe a defensive reaction in seeds stored at 20 degrees C. Activities of all scavenging enzymes, measured after slow imbibition of seeds, significantly increased in comparison to the non-treated control (8-9% MC, -10 degrees C). This increase was higher in embryo axes than in cotyledons. Our results suggest that the loss of viability of beech seeds during storage at different temperatures, above zero, and at different humidity levels is closely related to ROS production, and that the antioxidative system is not sufficient to protect them.

Antioxidants↗
PubMed2006

Humidity-dependent dynamic infrared linear dichroism study of a poly(ester urethane).

Fourier transform infrared techniques, infrared difference spectroscopy and dynamic infrared linear dichroism (DIRLD), have been utilized to explore the effects of humidity and water absorption on a poly(ester urethane). An environmental infrared microbalance cell was used to measure the infrared spectra as a function of humidity and accompanying weight change for the absorption-desorption processes. The infrared difference data indicate that exposure to humidity affects the hydrogen-bonding interactions in the polymer. Dynamic infrared linear dichroism studies in tensile deformation mode as a function of humidity demonstrate how changes in water content affect the orientational response of functional groups. Complex behavior as a function of humidity for functional groups involved in hydrogen bonding indicates that water absorbed by the polymer affects the micro-environments near these functional groups.

Humidity↗
PubMed2005

Effect of temperature and humidity on reproductive performance of crossbred sows in Thailand.

This study investigated the influence of season, temperature, and humidity on the reproductive performance of sows under tropical conditions. Data were collected from 11 sow herds from January 2001 to June 2002. Temperature and humidity were recorded daily for each herd from January 2001 to February 2002. Semen used was collected from boars housed in conventional open-air stables (six herds) or in evaporative cooling stables (five herds). A total of 43,875 farrowing records were included in the statistical analysis. Fourteen-day moving averages of daily maximum temperature and minimum humidity were calculated and merged with each reproductive record. ANOVA was applied to the reproductive records. In addition to the fixed effects included in the statistical models (e.g. system, season, parity, temperature, and humidity), the random effect of herd within system was included. The total number of piglets born was analyzed in relation to the climate at previous weaning (NTB-w), at mating (NTB-m), and at farrowing (NTB-f). The housing system of the boars had no significant effect on any of the reproductive variables analyzed. Season (2-month periods) as well as parity number had a significant effect on all reproductive variables analyzed. Increased length of previous lactation had a significant and favorable effect (P < 0.001) on NTB-w, NTB-m, and weaning-to-first-service interval. There were indications that high temperature and humidity (recorded at the herd level) at previous weaning/mating or at farrowing had negative effects on litter size, but these negative influences were not consistent.

Analysis of Variance↗
PubMed2006

Levels of N-methyl-2-pyrrolidone (NMP) and its metabolites in plasma and urine from volunteers after experimental exposure to NMP in dry and humid air.

The aim of this study was to investigate if the uptake of N-methyl-2-pyrrolidone (NMP), a widely used industrial chemical, increases after exposure to NMP in humid air compared to dry air. NMP has been described to be an airway irritant and a developmentally toxic compound. Six male volunteers were exposed to NMP, three at the time, for 8h in an exposure chamber. They were each exposed on four different occasions to air levels of 0 and 20mg NMP/m(3) in dry and humid air. Blood and urine were sampled before, during and up to 5 days after the end of the 8-h exposure. Plasma and urine were analysed for NMP and its metabolites, using liquid chromatography-tandem mass spectrometry. There was no statistically significant increase in the total cumulated excretion of NMP and its metabolites in urine after exposure in humid air as compared to dry air. Furthermore, there were no differences in the levels of peak concentrations in either plasma or urine. Also, no differences were found in AUC between the exposures. However, there were large individual differences, especially for the exposure in humid air. A not previously identified metabolite in human, 2-pyrrolidone (2-P), was identified. The results do not support a significantly higher absorption of NMP at exposure in humid air as compared to dry air. However, the large individual differences support the use of biological monitoring for assessment of NMP exposure. In addition, 2-P was confirmed to be an NMP metabolite in humans. This may be of importance for the developmental toxicity of NMP since 2-P have been described to be a reproductively toxic substance.

Adult↗
PubMed1998

Effects of relative humidity and applied force on atomic force microscopy images of the filamentous phage fd.

The filamentous phage fd was studied by both contact- and tapping-mode atomic force microscopy under conditions of controlled variations in relative humidity and changes in the applied tip force. By spin-coating freshly cleaved mica with phage containing solutions having very low salt content followed by rapid humidity control, stable and reliable sample preparation was achieved. The apparent height of the phage varied by about 10-fold with a quadratic dependence on the stabilized relative humidity, extrapolating to 73% of the accepted X-ray diffraction-based height at 0% relative humidity. The variation in measured height with relative humidity largely reconciles previous widely varying atomic force microscopy estimates of this dimension for the filamentous phage. Our finding that contact-mode images of phage are more difficult to analyze than those acquired in tapping mode are consistent with previously published results on other biological specimens such as DNA.

Humidity↗
PubMed2000

Influence of relative humidity on the mechanical and drug release properties of theophylline pellets coated with an acrylic polymer containing methylparaben as a non-traditional plasticizer.

The purpose of this study was to investigate the influence of relative humidity (RH) on the mechanical and dissolution properties of theophylline pellets coated with Eudragit((R)) RS 30 D/RL 30 D containing methylparaben (MP) as a non-traditional plasticizer. The coated beads were stored at 23 degrees C and at different relative humidities (0, 29, 51, 75 and 84% RH). The effect of storage conditions on the rate of drug release from coated beads was determined in pH 7.4 phosphate buffer solution. The mechanical properties, including tensile strength and Young's modulus, of individual beads were determined by a diametral compression method with a Chatillon((R)) tension/compression apparatus. The morphology of the intact and fractured beads was investigated using scanning electron microscopy (SEM). The moisture content of the polymeric films was determined using a Karl Fischer coulometric moisture analyzer. The results from the mechanical studies demonstrated that an increase in the relative humidity resulted in a decrease in the tensile strength and Young's modulus of the coated beads. SEM photographs showed that coated beads stored at 0% RH exhibited brittle fracture failure. The coated beads stored at 84% RH showed ductile behavior, which was attributed to the hydroplasticization effect on the acrylic polymer due to the uptake of moisture. The moisture content in the films was also shown to influence the rate of drug release from Eudragit((R)) RS 30 D/RL 30 D coated beads containing MP as the plasticizer. The change in release profiles could be minimized when the relative humidity was reduced to zero. The dissolution rate of theophylline from the coated beads decreased when stored at high relative humidities. This trend was reversed when the coated beads that were stored at 84% RH for 5 weeks, were then equilibrated at 0% RH.

Humidity↗
PubMed2003

Drying temperature and relative humidity effects on wheat gluten film properties.

The mechanical and physical properties of glycerol-plasticized wheat gluten films dried at different temperatures (20, 50, and 80 degrees C) and relative humidities (35 and 70% RH) were investigated. Dispersion of wheat gluten was prepared at pH 11 in aqueous solution. Films were obtained by casting the wheat gluten suspension, followed by solvent evaporation in a temperature and relative humidity controlled chamber. Decreasing relative humidity altered most of the mechanical properties. At 35% RH, tensile strength increased when drying temperature increased. However, at 70% RH, tensile strength decreased when temperature increased. Thickness of the films decreased by increasing temperature. Hypothetical coating strength increased with increasing drying temperature at 35% RH. However, at 70% RH, a maximum value was observed at 50 degrees C. Films produced at 80 degrees C exhibited low solubility in aqueous solution. Addition of 1.5% (w/v) sodium dodecyl sulfate increased solubility of all of the films except the film dried at 50 degrees C and 70% RH. Overall, drying temperature and relative humidity affected mechanical and physical properties of the wheat gluten films. However, the effect of drying temperature was more pronounced than the effect of relative humidity.

Chemical Phenomena↗
PubMed2004

Humidity-dependent reversible aggregation of rhodamine 6G dye immobilized within layered niobate K4Nb6O17.

The spectroscopic behavior of rhodamine 6G (R6G) dye intercalated in layered hexaniobate K4Nb6O17 was investigated. R6G cations were intercalated into the niobate through displacement of preintercalated alkylammonium ions. Powder X-ray diffraction and elemental analysis indicated that the dye molecules were densely accommodated in the interlayer spaces of niobate. The spectroscopic behavior of intercalated R6G was characterized by humidity-dependent aggregation at room temperature. The dye molecules were present dominantly as monomers under humid conditions (93% relative humidity (RH)), while they formed dimers under relatively dry conditions (20% RH). The aggregation-deaggregation of dye occurred reversibly depending on the humidity. The reversible aggregation was not accompanied by a large alteration of the interlayer structure of the sample, because only a small amount of water was adsorbed/desorbed with a small change in the basal spacing of the intercalation compound during the humidity change.

Adsorption↗
PubMed2004

The influence of temperature and relative humidity on the development of Lepidoglyphus destructor (Acari: Glycyphagidae) and its production of allergens: a laboratory experiment.

Laboratory experiments with Lepidoglyphus destructor on a diet of mainly whole wheat were conducted to study the mite's development and production of a specific allergen, Lep d 2, at four different temperatures (5, 10, 15 and 20 degrees C) and three levels of relative humidity (ca. 70-88%). Statistical models were used to analyse the role played by temperature, relative humidity and time in explaining the observed number of L. destructor and the amount of allergen produced. Moreover, the life stage distributions of the mites were determined and related to the population growth. Based on a statistical model the intrinsic rate of natural increase, rm, was computed for a range of different temperatures and relative humidities. High relative humidity in combination with temperatures at about 25 degrees C will lead to the highest rm (ca. 0.15 day-1). The highest concentration of Lep d 2 was 3 micrograms g-1 grain, found at 20 degrees C and high relative humidity at a mite density of 254 mites g-1 grain. The concentration of allergens in the grain was best explained by a model that incorporated both the current and the cumulative numbers of mites.

Acaridae↗
PubMed2004

Humidity-induced magnetization and magnetic pole inversion in a cyano-bridged metal assembly.

In general, magnetic properties of bulk magnetic materials are independent of the humidity of the environment. To obtain a magnetic material that has humidity-sensitive characteristics, water vapour must penetrate the lattice and act on spin sites. Nanoporous materials composed of metal-assembled complexes may be expected to display some humidity response because materials in this category can show functionalities such as gas storage and molecular recognition. Here, we demonstrate humidity-induced reversible variations in the magnetic properties of cyano-bridged cobalt(II)-manganese(II)-chromium(III) metal assemblies. The observed magnetic humidity response is due to adsorption and desorption of a ligand water molecule on the cobalt ion, which changes cobalt (II) between a 6- and 4-fold coordination geometry and switches the magnetic interaction between ferromagnetic coupling and antiferromagnetic coupling.

Cobalt↗
PubMed1998

Mechanical ventilation protects one-storey single-dwelling houses against increased air humidity, domestic mite allergens and indoor pollutants in a cold climatic region.

BACKGROUND: Poor ventilation in modern, highly insulated housing is an important factor in promoting indoor humidity levels to exceed 7 g/kg in cold climatic regions. OBJECTIVE: To investigate the ventilation rate in houses with different ventilation systems in relation to indoor air humidity, domestic mite allergen levels and volatile organic compounds (VOC). METHODS: Measurements were performed regarding ventilation rate, indoor temperature, air humidity, mattress mite allergen concentrations using enzyme-linked immunosorbent assay and total indoor VOC in 59 similarly constructed one-storey single-dwelling houses. In 22 of the houses, a mechanical supply and exhaust ventilation were installed after construction. RESULTS: In only five of the houses with mechanical supply and exhaust ventilation the air exchange rate per hour (ACH) was below 0. 5 compared with 24 of the 29 houses with natural ventilation (OR = 0. 06, CI 95% 0.01-0.2). None of the 23 houses with an ACH >/= 0.5 had an absolute indoor humidity (AIH) of 7 g/kg air or more, compared with 10 of the 36 houses with an ACH < 0.5 (P = 0.01 ). In none of the 23 houses with an ACH >/= 0.5 were concentrations of mite allergen exceeding 2 microg/g of dust found, compared with six of the 36 houses (17%) with an ACH below 0.5 (P = 0.04). Further, 10 of the 34 houses with a total VOC exceeding 200 microg/m3 had mite allergen in mattress dust exceeding 0.5 microg/g, compared with one of the 22 houses with VOC < 200 microg/m3 (P = 0.04). CONCLUSION: The study shows that in modern, highly insulated, one-storey single-dwelling houses in cold temperate regions, mechanical ventilation increases the possibility of reaching an ACH of >/= 5 which protects against indoor humidity levels contributing to mite survival as well as high levels of indoor air pollutants in winter.

Air Pollution, Indoor↗