Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “BONE REGENERATION”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

Influence of bone marrow on membrane-guided bone regeneration of segmental long-bone defects in rabbits.

Defects 10 mm long were created in long bone in the diaphysis of both radii of 18 rabbits (test and control side). On the test side, ingrowth of bone marrow into the defects was hindered or delayed by: plugging the opening of the cut bone ends with gutta-percha points (n = 7); plugging with Gelfoam (n = 6); or by removing the bone marrow by flushing with saline (n = 5). The defects on both test and control side were covered with an expanded polytetrafluoroethylene membrane, shaped as a tube. Healing was followed with radiographs for four to five months, after which the animals were killed and ground sections of the areas of the defects were prepared for histological examination. On the control side, nine of 18 animals had complete osseous bridging of the defect, and a small transverse non-mineralised zone remained in the centre of the healed defect in the other animals. This zone consisted of loose connective and cartilagenous tissue as well as connective tissue obviously derived from the outside of the membrane. By preventing or delaying the ingrowth of bone marrow we retarded the regeneration of mineralised bone, particularly in the gutta-percha and flushed bone marrow groups. The principle of guided tissue regeneration may be used to achieve regeneration of extensive long-bone defects. Any attempts to delay or prevent bone marrow ingrowth into the defects did retard regeneration of segmental long-bone defects.

Animals↗

Tissue engineering: TGF-beta superfamily members and delivery systems in bone regeneration.

The induction of bone formation requires three parameters that interact in a highly regulated process: soluble osteoinductive signals, capable responding cells, and a supporting matrix substratum or insoluble signal. The use of recombinant and naturally derived bone morphogenetic proteins and transforming growth factor beta(s) (TGF-beta(s)) has increased our understanding of the functions of these morphogens during the induction of endochondral bone formation. In addition, growing understanding of the cellular interactions of living tissues with synthetic biomaterials has led to the in vivo induction of bone formation using porous biomimetic matrices as an alternative to the use of autografts for bone regeneration. This review outlines the basis of bone tissue engineering by members of the TGF-beta superfamily, focusing on their delivery systems and the intrinsic induction of bone formation by specific biomimetic matrices with a defined geometry.

Animals↗

The effect of heat on bone regeneration: an experimental study in the rabbit using the bone growth chamber.

A dividable titanium implant that, after insertion in the tibial metaphysis of an experimental animal, permits a numerical estimation of ingrowing bone was used to evaluate the effects of a defined temperature rise on bone regeneration. Heating the test implants to 47 degrees C or 50 degrees C for 1 minute caused significantly reduced bone formation in the implants, while no significant effects were observed after heating to 44 degrees C for 1 minute. The results reflect the importance of controlling the heat produced during surgery to avoid impaired bone regeneration.

Animals↗

Expression of bone morphogenetic protein 2 and fibroblast growth factor 2 during bone regeneration using different implant materials as an onlay bone graft in rabbit mandibles.

OBJECTIVES: The purpose of this study was to histologically and immunohistochemically evaluate bone regeneration using 3 different implant materials in rabbit mandibles and to compare the bone regenerative capability of these materials in an animal model. STUDY DESIGN: Adult male Japanese white rabbits (n = 48; 12-16 wks old; 2.5-3.0 kg) were divided into 4 groups, consisting of 12 animals each. The implant materials were beta-tricalcium phosphate (beta-TCP), autologous bone derived from the radius, and recombinant human bone morphogenetic protein 2 (rhBMP-2) with polylactic acid/polyglycolic acid copolymer and gelatin sponge (PGS) complex. After incising along the inferior border of the mandible, the materials were implanted as only grafts and covered by titanium mesh with screws. No material was implanted into the control group. The rabbits were killed at 2, 4, 8, 12, and 24 wks postoperatively, and formalin-fixed specimens containing titanium mesh were embedded in acrylic resin. The specimens were stained with hematoxylin and eosin. For immunohistochemical analysis, the specimens were treated with BMP-2 and fibroblast growth factor 2 (FGF-2) antibodies. Finally, they were examined microscopically. RESULTS: The autologous bone induced substantially more new bone formation compared with beta-TCP at 4 wks postoperatively. However, rhBMP-2/PGS induced new bone formation at 8 wks postoperatively. No growth of bony tissue was observed in the control group at any period. In the autologous bone and rhBMP-2/PGS groups, both BMP-2 and FGF-2 were observed later in the beta-TCP group than in other groups. CONCLUSION: This study suggests that autologous bone as well as rhBMP-2/PGS implants induce expression of both BMP-2 and FGF-2 specifically at the operated sites, even at early stages.

Animals↗

Digital radiography. A predictor of regenerate bone stiffness in distraction osteogenesis.

The newly formed regenerate bone during limb lengthening usually is assessed by observing standard plain radiographs. However, no objective data correlate the radiographic appearance with the quantitative strength of the newly formed bone. A noninvasive method was developed to assess the regenerate bone using digital radiography. The investigations were performed in a micropig animal model. The right tibia was distracted for 10 days at 2 mm per day. Digital radiography was performed after the distraction during a 10-day consolidation period. For quantitative analysis, an aluminum step wedge was placed on all images, and a region of interest was outlined in the regenerate bone. A calibration curve was calculated by measuring the corresponding gray values of the aluminum phantom. The calibration equation was used for determining the mean density in the region of interest. This method was sensitive in assessing day to day healing progress. The measurements taken the day before sacrifice were compared with torsional mechanical data using a material testing machine. The high correlation between the densimetric evaluations and the biomechanical data suggests this method is a useful tool for in vivo assessment of the regenerate bone during the consolidation period in distraction osteogenesis.

Absorptiometry, Photon↗

Allogenic peripheral blood derived mesenchymal stem cells (MSCs) enhance bone regeneration in rabbit ulna critical-sized bone defect model.

Mesenchymal stem cells (MSCs) were demonstrated to exist within peripheral blood (PB) of several mammalian species including human, guinea pig, mice, rat, and rabbit. Whether or not the PB derived MSCs (PBMSCs) could enhance the regeneration of large bone defects have not been reported. In this study, rabbit MSCs were obtained from mononuclear cells (MNCs) cultures of both the PB and bone marrow (BM) origin. The number of PBMSCs was relatively lower, with the colony forming efficiency (CFE) ranging from 1.2 to 13 per million MNCs. Under specific inductive conditions, PBMSCs differentiated into osteoblasts, chondrocytes, and adipocytes, showing multidifferentiation ability similar to BMMSCs. Bilateral 20 mm critical-sized bone defects were created in the ulnae of 12 6-month-old New Zealand white rabbits. The defects were treated with allogenic PBMSCs/Skelite (porous calcium phosphate resorbable substitute), BMMSCs/Skelite, PBMNCs/Skelite, Skelite alone, and left empty for 12 weeks. Bone regeneration was evaluated by serial radiography, peripheral quantitative computed tomography (pQCT), and histological examinations. The X-ray scores and the pQCT total bone mineral density in the PBMSCs/Skelite and BMMSCs/Skelite treated groups were significantly greater than those of the PBMNCs/Skelite and Skelite alone groups ( p < 0.05), respectively. Histologically, newly formed bone was evident in the PBMSCs/Skelite and BMMSCs/Skelite treated groups. The findings demonstrated that the rabbit PBMSCs possessed multidifferentiation potential comparable with BMMSCs, allogenic PBMSCs seeded onto porous calcium phosphate resorbable substitutes enhanced bone regeneration in the rabbit ulna critical-sized bone defect model, suggesting allogenic PBMSCs may be a new source of circulating osteogenic stem cells for bone regeneration and tissue engineering.

Animals↗

Biomechanical model to simulate tissue differentiation and bone regeneration: application to fracture healing.

Bone regeneration is a common biological process occurring, for example, during fracture healing or osseo-integration of prostheses. Computer simulation of bone regeneration is difficult to carry out because it is a complex sequence of cell-mediated processes regulated by mechanobiological stimuli. An algorithm to predict the time-course of intramembranous and endochondral ossification has been developed. The algorithm assumes that there are precursor cells in the undifferentiated tissue and that these cells differentiate into either fibroblasts (to form fibrous connective tissue), chondrocytes (to form cartilaginous tissue) or osteoblasts (to form bone), based on a combination of biophysical stimuli derived from strain in the collagenous matrix and flow of the interstitial fluid. Both these stimuli are known to deform the precursor cells, and the authors hypothesise that this causes activation of cell differentiation pathways. The observation that precursor cells take time to spread throughout the fracture callus has been included in the algorithm. The algorithm was tested in an investigation of the fracture healing of a long bone using an axi-symmetric finite element model. The spatio-temporal sequence of tissue phenotypes that appear in the course of fracture healing was successfully simulated. Furthermore, the origin of the precursor cells (either surrounding muscle, bone marrow or periosteum) was predicted to have a fundamental effect on the healing pattern and on the rate of reduction of the interfragmentary strain (IFS). The initial IFS = 0.15 drops to 0.01 within seven iterations if cells originated from the surrounding soft tissue, but took more than 50% longer if cells originated in the inner cambium layer of the periosteum, and four times longer if precursor cells originated from the bone marrow only.

Algorithms↗

[Haversian remodeling in guided bone regeneration].

OBJECTIVE: To study the relationship between Haversian remodeling and bone regeneration in guided bone regeneration (GBR). METHOD: 10 mm long segmental defects were created in the diaphyses of one radius in 24 rabbits. The defect was covered with silicone membrane shaped as a tube. Rabbits were killed at the 3rd day, 1st, 2nd, 3rd, 4th, 6th, 10th, 12th weeks. Undecalcified section was prepared for histologic examination. RESULT: Bone resorption was seen in Haversian canal, connection between osteocytes and osteoblasts in Haversian, and connection of osteoblasts in Haversian and in callus. The process of Haversian remodeling was involved in the process of bone regeneration, just like primary bone healing. The process of Haversian remodeling and regeneration was coupled in topography, time and size. CONCLUSION: Bone repair is related to Haversian remodeling.

Animals↗

Histological findings in guided bone regeneration (GBR) around titanium dental implants with autogenous bone chips using a new resorbable membrane.

The aim of this study was to test the value of the new polydioxanone-membrane (PDS, Ethicon, Norderstedt, Germany) in combination with autogenous bone as a spacer for guided bone regeneration of denuded implant surfaces compared to simple augmentation. Forty implants were selected for 20 test cases (with membrane) and 20 control cases (without membrane) and were distributed randomly in 19 patients who were treated according to a standard protocol and examined. The defects were filled with autogenous bone chips, harvested interforaminally or locally, and were covered by the PDS membrane within the test group (control group: periosteum). The membranes were fixed with Memfix screws and cover screws. Seven membranes became exposed and were removed before reentry. Within the control group, three augments were sequestered. After 6 months, reentry was performed, the healing results were observed clinically, and biopsies were taken. The test group, including the seven cases with early removal of the membrane, showed that bone had filled in the defects in 95% of test cases, compared with 60% for the control group. The results of this study show that single augmentation of defects exceeding 9 mm2 is not sufficient. The membrane used in this investigation may be helpful for guided bone regeneration (GBR) at denuded screw thread sites in implant dentistry.

Adult↗

In vitro change in mechanical strength of beta-tricalcium phosphate/copolymerized poly-L-lactide composites and their application for guided bone regeneration.

Novel composites of bioactive beta-tricalcium phosphate [Ca(3)(PO(4))(2)] and biodegradable copolymerized poly-L-lactide (CPLA) were prepared by a heat-kneading method. The mechanical and chemical changes of the composites were evaluated in vitro by soaking in physiological saline and Dulbecco's phosphate buffered saline. When soaked in physiological saline, the 3-point mechanical strength decreased rapidly from 60 to 30 MPa in the initial 4 weeks and then gradually reached a plateau; the initial decrease in the mechanical strength was ascribed to the dissolution of beta-tricalcium phosphate from the surface. The mechanical properties evident at 8-12 weeks were sufficient for the composites to be used as a biodegradable material for regeneration of bone because the hydrolysis of CPLA was inhibited in both physiological saline and phosphate-buffered saline as a result of a pH-buffering effect. Composite membranes 250-microm thick were used to regenerate large bone defects in beagle dogs: 10 x 10 x 10 mm(3) in volume in the mandible and 20 mm in length in the tibia. The afflicted areas covered with the composite membranes were almost perfectly filled with new bone 12 weeks after the operation, whereas those covered with a CPLA membrane or without any membranes were invaded by soft tissue.

Algorithms↗

Alveolar bone formation at dental implant dehiscence defects following guided bone regeneration and xenogeneic freeze-dried demineralized bone matrix.

The present study evaluated rate and extent of alveolar bone formation in dental implant dehiscence defects following guided bone regeneration (GBR) and implantation of xenogeneic freeze-dried demineralized bone matrix (xDBM). A total of 16 titanium plasma-sprayed (TPS) and 16 hydroxyapatite-coated (HA) titanium cylinder implants were inserted in 4 mongrel dogs following extraction of the mandibular premolar teeth. Four implant sites per jaw quadrant (2 TPS and 2 HA implant sites) were prepared into extraction sockets in each dog. Buccal alveolar bone was removed to create 3 x 5 mm dehiscence defects. Two jaw quadrants in separate animals received GBR, GBR + xDBM, xDBM (control), or gingival flap surgery alone (GFS; control). Thus, four conditions were available for each implant type (TPS or HA): GBR, GBR + xDBM; xDBM and GFS. The animals received fluorescent bone labels to allow observations of rate and extent of bone formation. Animals were sacrificed at 12 weeks postsurgery and block sections were harvested for histologic analysis. There were no apparent histologic differences between TPS and HA implant defects. GBR and GBR + xDBM resulted in almost complete bone closure of the dental implant dehiscence defect. Rate of bone formation appeared higher following GBR alone. Extent of bone formation appeared somewhat greater following GBR + xDBM; however, delayed. xDBM alone did not adequately resolve the bony defect. In conclusion, GBR results in rapid, clinically relevant bone closure of dental implant dehiscence defects. Adjunctive implantation of xDBM does not appear to significantly improve the healing response in the model used.

Alveolar Process↗

Effect of perforations in burr hole covers on cranial bone regeneration in rabbits.

The reconstruction of bone defects is a significant problem in cranio-maxillofacial surgery. In an effort to avoid the known disadvantages of autogenous bone grafting, alternatives have been investigated. Bone substitute materials, degradable or nondegradable, aim at facilitating bone regeneration, while they take over load-bearing functions for a period of time. In this study, the healing of cranial defects in rabbits was assessed using polylactide guiding covers with and without perforations. Bilateral circular cranial defects were produced in 16 New Zealand white rabbits. The defects were covered with extruded and laser cut polylactide burr hole covers, each animal receiving a perforated burr hole cover on one side and a nonperforated one on the contralateral side. Bone seeking fluorochromes were administered at regular intervals. After an observation period of 8 weeks the amount of bone regeneration in the area of the defects was quantified from contact radiographs, and the dynamics of bone formation were assessed by fluorescence microscopy. Stained sections were used to analyze morphologic differences. No signs of adverse tissue reactions or osteolysis were observed. A bone-guiding function was observed for both covers with or without perforations. Intracranial tissue herniation into the defect hindered the regeneration process. Wide intraindividual and interindividual variation became apparent and average defect filling was only 40% within the 8-week observation period. In this model the perforated covers offered no advantage over nonperforated covers. It can be concluded from this study, that the use of external burr hole covers alone does not guarantee a full thickness regeneration of the cranial defect, but it provides a guiding function for promotion of structured bone regeneration.

Absorbable Implants↗

Physiological bases of bone regeneration I. Histology and physiology of bone tissue.

Bone is the only body tissue capable of regeneration, allowing the restitutio ad integrum following trauma. In the event of a fracture or bone graft, new bone is formed, which following the remodeling process is identical to the pre-existing. Bone is a dynamic tissue in constant formation and resorption. This balanced phenomena, known as the remodeling process, allows the renovation of 5-15% of the total bone mass per year under normal conditions. Bone remodeling consists of the resorption of a certain amount of bone by osteoclasts, likewise the formation of osteoid matrix by osteoblasts, and its subsequent mineralization. This phenomenon occurs in small areas of the cortical bone or the trabecular surface, called Basic Multicellular Units (BMU). Treatment in Traumatology, Orthopedics, Implantology, and Maxillofacial and Oral Surgery, is based on the biologic principals of bone regeneration, in which cells, extracellular matrix, and osteoinductive signals are involved. The aim of this paper is to provide an up date on current knowledge on the biochemical and physiological mechanisms of bone regeneration, paying particular attention to the role played by the cells and proteins of the bone matrix.

Bone Matrix↗

Bony healing of large cranial and mandibular defects protected from soft-tissue interposition: A comparative study of spontaneous bone regeneration, osteoconduction, and cancellous autografting in dogs.

The purpose of this study was to compare spontaneous bone regeneration, osteoconduction, and bone autografting in critical size calvarial and mandibular defects (defects which do not heal spontaneously during the lifetime of the animal) that were protected from soft-tissue interposition. Eighteen adult mongrel dogs underwent osteotomies to create a unilateral 30-mm segmental defect in the midbody of the edentulated right mandible and bilateral 15-mm x 20-mm full-thickness window defects in the parietal bones. The defects were either left empty, implanted with coralline hydroxyapatite (HA) blocks, or autografted with iliac cancellous bone. All defects were protected with a macroporous titanium mesh and the segmental mandibular defects were additionally stabilized by internal plate fixation. Specimens were retrieved after 2 and 4 months and three undecalcified longitudinal central sections including the osteotomy interfaces were prepared from each specimen for histometry and histology. Sections were analyzed for volume fractions of bone, soft tissue, and implant using scanning electron microscopy, backscatter electron imaging and histometric computer software. In the mandibular model, the empty defects exhibited the greatest amount of bone formation after 4 months (47.3 percent), which was greater than the amount of bone in the autografted group (34.8 percent) and significantly greater than the amount of bone within the hydroxyapatite implants (19.0 percent, p < 0.05). In the cranial defects, the autografted specimens demonstrated the greatest volume fraction of bone after 4 months (27.3 percent), which was significantly greater than within both the empty defects (18.2 percent, p < 0.05) and the hydroxyapatite implants (18.2 percent, p < 0.05). New bone formation in the mandibular defects united the cut ends at 4 months regardless of treatment and originated predominantly from the periosteum which remained present only along the alveolar border after surgical closure. In the calvarial defects, periosteum was not preserved and bone regenerated centripetally, originating from the diploë without any evidence of dural osteogenesis. Bone bridging was incomplete in the empty cranial defects at 4 months. In both the mandibular and cranial specimens, new bone at 2 months was a mixture of woven and parallel fibered bone. At 4 months, the new bone had remodeled almost entirely into mature Haversian bone. This study demonstrated a remarkable ability of defect protection with a macroporous protective sheet to facilitate bone regeneration in critical size mandibular and cranial bone defects. When active osteogenic periosteum was present, as in our mandibular model, we concluded that defect protection alone was sufficient to allow for healing even of critical size defects. When periosteum was absent as in our cranial defects, the limited spontaneous bone formation benefited from the added contributions of cancellous grafting and osteoconductive implants, both of which promoted bone bridging across the defects. We suggest that in the future a resorbable macroporous protective sheet would be advantageous in comparison to a titanium mesh to facilitate bone regeneration by preventing soft-tissue prolapse and allowing the migration of mesenchymal cells and the proliferation of blood vessels from the adjacent soft tissues into the bone defect. Finally, this study identified the need to differentiate critical size defects into those with and without defect protection and periosteum.

Animals↗

Simultaneous implant placement and bone regeneration around dental implants using tissue-engineered bone with fibrin glue, mesenchymal stem cells and platelet-rich plasma.

This study was undertaken to evaluate the use of tissue-engineered bone as grafting material for alveolar augmentation with simultaneous implant placement. Twelve adult hybrid dogs were used in this study. One month after the extraction of teeth in the mandible region, bone defects on both sides of the mandible were induced using a trephine bar with a diameter of 10 mm. Dog mesenchymal stem cells (dMSCs) were obtained via iliac bone biopsy and cultured for 4 weeks before implantation. After installing the dental implants, the defects were simultaneously implanted with the following graft materials: (i) fibrin, (ii) dMSCs and fibrin (dMSCs/fibrin), (iii) dMSCs, platelet-rich plasma (PRP) and fibrin (dMSCs/PRP/fibrin) and (iv) control (defect only). The implants were assessed by histological and histomorphometric analysis, 2, 4 and 8 weeks after implantation. The implants exhibited varying degrees of bone-implant contact (BIC). The BIC was 17%, 19% and 29% (control), 20%, 22% and 25% (fibrin), 22%, 32% and 42% (dMSCs/fibrin) and 25%, 49% and 53% (dMSCs/PRP/fibrin) after 2, 4 and 8 weeks, respectively. This study suggests that tissue-engineered bone may be of sufficient quality for predictable enhancement of bone regeneration around dental implants when used simultaneous by with implant placement.

Alkaline Phosphatase↗

Influence of Collagenfleece on bone regeneration.

It can be demonstrated that bone regeneration is stimulated by implantation of Collagenfleece a purified, heterologous collagen preparation. Defects were created in rabbit mandibles which were filled with Collagenfleece on the right side, while the defect on the left side served as a control. The progress in bone regeneration was followed by comparative light and electron microscopic investigations. In contrast to the controls, the defects which were treated with Collagenfleece showed quicker ossification.

Animals↗

Radiographic analysis of regenerated bone around endosseous implants in the canine using recombinant human bone morphogenetic protein-2.

Ideal endosseous implant placement involves a congruent bony housing in close apposition to the implant surface. Clinical situations are encountered, however, in which the entire implant surface cannot be in close apposition to bone. In these instances, bone grafting materials are generally used to regenerate bone around the implant. In this study, a biologically active bone differentiation factor, recombinant human bone morphogenetic protein-2 (rhBMP-2), was used with two different carriers to regenerate bone around implants in standardized critical-sized defects in the canine mandible. Half of the sites had a nonresorbable membrane placed over the defect. Longitudinal standardized radiographs were obtained to assess the amount of bone regeneration on the mesial and distal of the implants after 4 and 12 weeks of healing. Ninety-six implants were placed in 12 fox-hounds. Bone fill was determined by linear measurement of bone on the radiographs, and changes in bone density were evaluated by computer-assisted densitometric image analysis of discrete areas adjacent to the implant. After 4 weeks of healing, nonmembrane sites had significantly greater bone height than membrane-protected sites. Following 12 weeks of healing, sites treated with rhBMP-2 had significantly greater bone formation than untreated sites. Sites treated with rhBMP-2 and a membrane had the greatest bone fill, followed by sites treated with rhBMP-2 but no membrane. Sites without rhBMP-2, whether with or without a membrane, had less bone fill than sites with rhBMP-2. At 12 weeks, sites with a membrane resulted in significantly more gain in bone density than sites without a membrane. Furthermore, sites treated with a collagen carrier resulted in greater gains in bone density than sites treated with a polylactide/glycolide carrier. The results from this study demonstrate by radiographic evidence that new bone formation in critical-sized defects around implants is dependent on time after defect treatment, the type of carrier used, the use of a barrier membrane, and the presence of rhBMP-2. In addition, these findings suggest that rhBMP-2, a bone differentiation factor, can significantly stimulate bone formation around endosseous dental implants.

Analysis of Variance↗

Bone regeneration during distraction osteogenesis: mechano-regulation by shear strain and fluid velocity.

Corroboration of mechano-regulation algorithms is difficult, partly because repeatable experimental outcomes under a controlled mechanical environment are necessary, but rarely available. In distraction osteogenesis (DO), a controlled displacement is used to regenerate large volumes of new bone, with predictable and reproducible outcomes, allowing to computationally study the potential mechanisms that stimulate bone formation. We hypothesized that mechano-regulation by octahedral shear strain and fluid velocity can predict the spatial and temporal tissue distributions seen during experimental DO. Variations in predicted tissue distributions due to alterations in distraction rate and frequency could then also be studied. An in vivo ovine tibia experiment evaluating bone-segment transport (distraction, 1 mm/day) over an intramedullary nail was used for comparison. A 2D axisymmetric finite element model, with a geometry originating from the experimental data, was created and included into a previously developed model of tissue differentiation. Cells migrated and proliferated into the callus, differentiating into fibroblasts, chondrocytes or osteoblasts, dependent on the biophysical stimuli. Matrix production was modelled with an osmotic swelling model to allow tissues to grow at individual rates. The temporal and spatial tissue distributions predicted by the computational model agreed well with those seen experimentally. In addition, it was observed that decreased distraction rate (0.5 mm/d vs. 0.25 mm/d) increased the overall time needed for complete bone regeneration, whereas increased distraction frequency (0.5 mm/12 h vs. 0.25 mm/6 h) stimulated faster bone regeneration, as found in experimental findings by others. Thus, the algorithm regulated by octahedral shear strain and fluid velocity was able to predict the bone regeneration patterns dependent on distraction rate and frequency during DO.

Animals↗