Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Alum Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

Immunogenicity and adverse effects of inactivated virosome versus alum-adsorbed hepatitis A vaccine: a randomized controlled trial.

Immunogenicity and adverse effects of a novel inactivated hepatitis A vaccine based on virosomes (IRIV-HAV) was compared with a standard vaccine adsorbed to aluminium (Al-HAV). Seronegative volunteers (n = 301) were randomly allocated to one injection of IRIV-HAV or to two injections of Al-HAV, followed by a booster injection at 12 months. Two hundred and ninety-eight (99%) completed the first month and 215 (71%) could be evaluated at 1 year. Geometric mean antibody concentrations at days 0, 14 and at 12 months were similar in the two vaccine groups. Lower antibody concentrations were recorded with IRIV-HAV at day 28 (P < 0.0001) and at 13 months (P = 0.02). Seroconversion to protective antibody levels, however, was similar (98% at day 28, 94% at 12 months, 100% at 13 months). Local adverse effects were reported in 17% with IRIV-HAV but in 66% with Al-HAV (P < 0.0001) after the initial vaccination and in 32% and 42% following the booster vaccination (P = 0.05). In conclusion, IRIV-HAV may provide similar protection but cause less local adverse effects.

Alum Compounds↗

Decrease of serum triglyceride in normal rat fed with 2000 ppm aluminum diet for 67 days. II. Feeding young and adult rats a sucrose diet with addition of aluminum hydroxide and aluminum potassium sulfate.

To confirm the hypotriglyceridemic effect of aluminum (Al), male weanling and adult Wistar rats were fed sucrose diets with the addition of aluminum hydroxide (Al(OH)3) or aluminum potassium sulfate (AlK(SO4)2) for 67 days. As in the foregoing report (C. Sugawara, N. Sugawara, H. Kiyosawa, and H. Miyake, Fundam. Appl. Toxicol. 10, 607-615), no Al-induced anemia or hypophosphatemia was observed and serum Al did not exceed 20 ng/ml. Serum triglyceride (TG) was decreased by aluminum. Serum TG was significantly correlated with the serum nonesterified fatty acid (NEFA) concentration in both the Young groups (R = 0.757, n = 22, p less than 0.01) and the Adult groups (R = 0.727, n = 19, p less than 0.01). Neither serum cholesterol nor phospholipids was affected by Al ingestion. Aluminum caused a decrease in hepatic glycogen in all groups, but the decrease was significant only in Adult groups. Glycerol tri[9,10(n)-3H]oleate was administered by gastric tube into rats fed for 81 days with experimental diets. In all the Al-treated groups serum 3H was significantly greater than in control groups at 3 hr after intubation. At 24 hr after intubation, serum 3H did not differ between Control and Al-treated groups. Total 3H at 24 hr found in serum, liver, and epididymal adipose tissue was not changed significantly by Al feeding. These effects were observed without measurable increase of Al in the serum.(ABSTRACT TRUNCATED AT 250 WORDS)

Alum Compounds↗

Atheroprotective effect of adjuvants in apolipoprotein E knockout mice.

Strategies aimed at treating atherosclerosis by immunization protocols are emerging. Such protocols commonly use adjuvants as non-specific stimulators of immune responses. However, adjuvants are known to modify various disease processes. The aim of this study was to determine whether adjuvants alter the development of atherosclerosis. We performed immunization protocols in apolipoprotein E knockout mice (E degrees ) following chronic administration schedules commonly employed in experimental atherosclerosis. Our results point out a dramatic effect of several adjuvants on the development of atherosclerosis; three of the four adjuvants tested reduced lesion size. The Alum adjuvant, which is the adjuvant currently used in most vaccination protocols in humans, displayed a strong atheroprotective effect. Mechanisms accounting for atheroprotective effect of Freund's adjuvants included their capacity to increase both Th2 responses and anti-MDA-LDL IgM titers, and/or to impose atheroprotective lipoprotein profiles. The present study indicates that adjuvants have potent atheromodulating capabilities, and thus, implies that the choice of adjuvant is crucial in long-term immunization protocols in experimental atherosclerosis.

Adjuvants, Immunologic↗

Elevated expression of TARC (CCL17) and MDC (CCL22) in models of cigarette smoke-induced pulmonary inflammation.

TARC (CCL17) and MDC (CCL22) are well-known chemoattractants for Th2 cells. Here, we evaluated the role of both chemokines for cigarette smoke-induced airway inflammation. The expression profiles of MDC, TARC, and their receptor CCR4 were analyzed in models of acute and chronic cigarette smoke-induced airway inflammation that is characterized by a Th1 immune response. The results were compared to the expression of both chemokines in models of idiopathic pulmonary fibrosis and acute asthma, which are associated with a Th2 immune response. The expression of MDC and TARC was found to be elevated in all lung inflammation models. In contrast to the findings in the asthma and lung fibrosis models, the increased expression of MDC and TARC in the cigarette-smoke model was not associated with an increased infiltration of Th2 cells into smoke-treated lungs. Our data indicate that instead of Th2 cells, airway epithelial cells expressing CCR4 might be the principal targets for MDC and TARC released from alveolar macrophages during cigarette smoke-induced airway inflammation.

Alum Compounds↗

Coagulant selection and sludge conditioning in a slaughterhouse wastewater treatment plant.

Attempts were made in this study to examine the effectiveness of polymer addition to the aeration tank effluent prior to sludge flotation as practiced in a slaughterhouse wastewater treatment plant. The plant currently uses 10 mg/l of polymer prior to sludge flotation, but alternative, less-expensive, chemicals such as alum could be equally effective. Therefore, experiments were conducted using the Standard Jar test to determine the performance of both alum (Al2SO4.6H2O) and organic polymer. The dosages used for alum ranged between 0 and 1000 mg/l, whereas polymer dosages varied between 0 and 90 mg/l. The (optimal) removal efficiency for suspended solids in the mixed liquor was obtained at 400 mg/l for alum and 30 mg/l for polymer. It is evident that addition of alum or polymer results in significant removal of suspended solids reaching up to 99% for alum and 96% for polymer but alum produced a more compacted sludge. Removal of filterable COD was much lower in both cases since the chemicals used target the colloidal and suspended portion of the COD rather than the soluble (filterable) part of the COD.

Abattoirs↗

Use of coagulants in treatment of olive oil wastewater model solutions by induced air flotation.

Natural polyelectrolytes are suitable coagulants for the treatment of industrial and minicipal wastewaters because they are safe and have environmental benefits. Chitosan, a natural cationic polyelectrolyte, and other similar coagulants were used in the treatment of an olive oil water suspension as a model for the processing wastewater. The effect of chitosan, starch, alum and ferric chloride on the coagulation of oil droplets were determined by the jar test apparatus and turbidometric measurements. Olive oil emulsion samples were prepared by the use of surface active agents and other agents that could form stable oil water emulsions. The effect of parameters such as pH, ionic strength and optimum dosage of the coagulants were determined in the jar test experiments. Following the jar experiments, with the optimum concentration of the suitable coagulant, the emulsions were placed in an induced air flotation (IAF) cell to separate the coagulated oil droplets from solution. In the air flotation experiments, the effect of temperature, surfactant concentration and air flowrate were determined on the decrease of turbidity and COD of the emulsion samples. In the jar experiments, chitosan and alum used together at concentrations of 15 and 25 ppm, respectively, at pH 6 produced the lowest turbidity values. In the air flotation experiments, a concentration of 100 ppm of chitosan, an air flowrate of 3 l/min, aeration time of 45 s, temperature of 20 degrees C and pH 6 produced optimum levels. At optimum conditions of coagulation and flotation stages, the COD of the olive oil emulsion could be reduced by 95%.

Air↗

Potential nitrification in alum-treated soil slurries amended with poultry manure.

Alum is used to reduce environmental pollutants in poultry production. Alum decreases NH3 volatilization and increases total N and NH4+-N compared to untreated poultry manure. Nitrification in poultry wastes could therefore be stimulated due to higher NH4+ concentrations or could be inhibited because the soil environment is acidified. A 10-day laboratory study was conducted to study potential nitrification rates in soil slurries (20 g soil in 150 ml water) amended with 2.0 g alum-treated poultry manure. Fecal bacteria, NH4+, NO2-, NO3-, orthophosphate, pH, and NH3 were measured at 2-day intervals. Alum significantly reduced fecal bacteria concentrations through day 6. Water-soluble P was reduced 82% by day 10. Alum-treated manure had significantly increased NH4+ concentrations by day 8 and 10, and significantly decreased NO2- and NO3- concentrations by days 6-10. Alum's effect on potential nitrification was inhibitory in the soil environment. Slurries with alum-treated poultry manure had reduced nitrification rates, fecal bacteria, and soluble P. Therefore, in addition to reducing P loss, alum could temporarily reduce the risk for environmental pollution from land-applied manures in terms of both NO3- and fecal bacteria loss.

Alum Compounds↗

Regulation of antigen-specific versus by-stander IgE production after antigen sensitization.

IgE is critical in the pathogenesis of allergic disorders. In this report, we investigated the differential regulation of antigen-specific and by-stander IgE. Ovalbumin (OVA) immunization did not increase IgE producing cells in the spleen, but significantly enhanced the intracellular IgE content of all IgE+ cells. In contrast, OVA induced a significant increase of IgE+ cells in the draining lymph nodes (LN). Furthermore, OVA-specific IgE was detected only in the ex vivo cultures of the draining LN but not the spleen cells, while total IgE was increased in both cultures. These results indicated that antigen-specific IgE was mainly produced in the draining LN, while the spleen was a major source for by-stander IgE. Anti-IL-4, but not anti-IL-13, antibody blocked the expansion of IgE producing cells in the draining LN as well as systemic OVA-specific and total IgE levels, indicating IL-4 was important in both antigen-specific IgE generation and total IgE upregulation.

Adjuvants, Immunologic↗

Evaluation of modified clay coagulant for sewage treatment.

The use of modified clays as coagulants for sewage treatment was investigated in this study. The raw clays were montmorillonites K10 and KSF, and were modified by polymeric Al or Fe and/or Al/Fe mixing polymeric species. The comparative performance of modified clays and aluminium sulphate and ferric sulphate were evaluated in terms of the removal of turbidity, suspended solids, UV(254)-abs, colour, and total and soluble CODs. The results demonstrated that after being modified with mixing polymeric Al/Fe species, two montmorillonite clays possess greater properties to remove the particles (as suspended solids) and organic pollutants (as COD and UV(254)-abs) from the sewage and to enhance the particle settling rate significantly.

Adsorption↗

Improvement of coagulation-flocculation process using anionic polyacrylamide as coagulant aid.

A physicochemical treatment (coagulation-flocculation) was applied to a slaughterhouse wastewater, using anionic polyacrylamide as coagulant aid to improve the settling velocity of the flocs formed with the coagulants used: ferric sulphate, aluminium sulphate and polyaluminium chloride. The optimum speed and stirring time for the flocculation stage were ascertained along with the optimum pH and coagulant and coagulant aid doses. The speed and coagulation time were initially set according to recommendations in the literature concerning the treatment of this type of water. Chemical oxygen demand (COD), biochemical oxygen demand at 5 days (BOD5) and total suspended solids (TSS) were recorded at the beginning and end of each experiment in order to monitor the process. Once the optimal conditions had been established, several parameters were measured in order to assess the coagulation-flocculation process: particle number and size, sludge volume, nutrients (ammonia nitrogen, total Kjeldahl nitrogen, albuminoid nitrogen, orthophosphate, total phosphorus) and the residual concentration of iron and aluminium in clarified water. Anionic polyacrylamide, when added with ferric sulphate or polyaluminium chloride led to a significant increase in the settling speed.

Acrylic Resins↗

Effect of SO4 2-/Al3+ ratio and OH-/Al3+ value on the characterization of coagulant poly-aluminum-chloride-sulfate (PACS) and its coagulation performance in water treatment.

A poly-aluminum-chloride-sulfate (PACS) was prepared at various experimental conditions. It was found that the coagulation performance of PACS in water treatment was affected by the PACS particle size distribution and zeta potential value. The experimental results indicated that the PACS particle size distribution and zeta potential value were highly influenced by SO(4)(2-)/Al(3+) molar ratio and bacicities (gamma,gamma=[OH]/[Al]) value. At a fixed gamma value of 2.0, the average PACS particle size increased from 25 to 80nm with the increase of SO(4)(2-)/Al(3+) ratio from 0 to 0.1. Further increase of the SO(4)(2-)/Al(3+) ratio resulted in acute increment particle size of PACS extremely, which can be attributed to its aggregation. At a fixed SO(4)(2-)/Al(3+) ratio of 0.0664, the largest average size of PACS occurred at gamma=2.0. It was also found that the zeta potential value of PACS was strongly influenced by the SO(4)(2-)/Al(3+) ratio, gamma value and pH of the aquatic solution. The zeta potential value of PACS increased with increasing of SO(4)(2-)/Al(3+) ratio. At a fixed SO(4)(2-)/Al(3+) ratio of 0.0664, PACS achieved greatest zeta potential value at gamma value of around 2.0. The maximum positive zeta potential value of PACS was found at pH5.3. At a fixed gamma value of 2.0 and SO(4)(2-)/Al(3+) ratio of 0.0664, the PACS achieved an optimum natural organic matter and turbidity removal efficiency.

Alum Compounds↗

Treatment of the textile wastewater by combined electrocoagulation.

Electrocoagulation (EC) due to some advantages over chemical coagulation is becoming a popular process to be used for wastewater treatment. The aim of this paper is to investigate the effect of initial addition of a chemical coagulant such as polyaluminum chloride (PAC) or alum on the COD removal efficiency of EC treatment of textile wastewaters. The two salts exhibited the same performance in chemical coagulation, but in the combined electrocoagulation (CEC), PAC was found to significantly enhance the COD removal rate and efficiency, depending on the amount of the total aluminum supplied, by initial addition and electrochemical generation. A comparative operating cost analysis was also given and it was found that with the same operating cost per mass of COD removed, CEC performance was 80%, in contrast to 23% with EC, in 5 min of operation.

Alum Compounds↗

The exploration of potassium ferrate(VI) as a disinfectant/coagulant in water and wastewater treatment.

This paper aims to explore potassium ferrate(VI) (K2FeO4) as an alternative water treatment chemical for both drinking water and wastewater treatment. The performance of potassium ferrate(VI) was evaluated in comparison with that of sodium hypochlorite (NaOCl) and that of NaOCl plus ferric sulphate (FS) or alum (AS). The dosages of ferrate(VI), NaOCl and FS/AS and sample pH values were varied in order to investigate the effects of these factors on the treatment performance. The study demonstrates that in drinking water treatment, ferrate(VI) can remove 10-20% more UV(254)-abs and DOC than FS for the same dose compared for natural pH range (6 and 8). The THMFP was reduced to less than 100 microg l(-1) by ferrate(VI) at a low dose. In addition to this, ferrate(VI) can achieve the disinfection targets (>6 log10 inactivation of Escherichia coliform (E. coli)) at a very low dose (6 mg l(-1) as Fe) and over wide working pH in comparison with chlorination (10 mg l(-1) as Cl2) plus coagulation (FS, 4 mg l(-1) as Fe). In wastewater treatment, ferrate(VI) can reduce 30% more COD, and kill 3log10 more bacteria compared to AS and FS at a similar or even smaller dose. Also, potassium ferrate(VI) can produce less sludge volume and remove more pollutants, which could make sludge treatment easier.

Alum Compounds↗

The effect of coagulation on the toxicity and mutagenicity of reclaimed municipal effluents.

The objectives of this work were the assessment of the effectiveness of coagulation on the reclamation of secondary effluents and the evaluation of the quality of reclaimed waters by the examination of their ecotoxic and mutagenic properties. Aluminum coagulants resulted in higher removal of organic content, than iron coagulant, reaching up to 40%; the removal of heavy metals, such as zinc and copper was enhanced by the addition of a low strength anionic flocculant. The toxicity of pre-concentrated samples to the bacteria Vibrio fischerii was related to the heavy metal content, especially zinc and copper, indicating the significance of the metals bioavailability and their potential interactive effects. The secondary effluents exhibited mutagenic effects on strain TA 98; these effects were increased during coagulation with ferric chloride (both in absence and presence of flocculant). However, the addition of aluminum coagulants resulted in a decrease of mutagenic potential of secondary effluents, due to the extended removal of organic matter.

Aliivibrio fischeri↗

Coagulant toxicity and effectiveness in a slaughterhouse wastewater treatment plant.

Attempts were made in this study to examine the toxicity of polymer/alum addition to the aeration tank effluent prior to sludge flotation as practiced in a slaughterhouse wastewater treatment plant. Based on the Microtox toxicity assay, alum at concentrations 100-200 mg/L was found to slightly increase the toxicity level of slaughterhouse wastewater effluent. However, at higher concentrations (300-1000 mg/L), significant residual chronic toxicity remained in all slaughterhouse wastewater effluents, independent of the treatment process. Polymer, on the other hand, removed organics and solids, but polymer effluents are more toxic than alum at extremely low concentration. Results indicated that alum and polymer caused inhibitory effects to the system at soluble concentrations of approximately 400 and 60 mg/L and above, respectively. The data also indicated that the solids collected in both tests (polymer/alum) were much more toxic than those from the effluents. Sediment samples from the polymer tests were the most toxic. Furthermore, the effluent toxicity of the coagulants was dramatically more significant when used after the settlement of solids than when used in mixed liquor. In addition, strong correlations were observed between the observed toxicity for a series of supernatants and the coagulant concentrations of alum/polymer processes, and between supernatants and solids collected in both tests.

Abattoirs↗

Induction of a late asthmatic response associated with airway inflammation in mice.

To investigate mechanisms underlying the late asthmatic response, we developed a murine model using repetitive intratracheal antigen challenge. BALB/c mice sensitized by i.p. injection with ovalbumin+alum were challenged with ovalbumin intratracheally 4 times. The 1st challenge induced early airway obstruction peaking at 30 min but without a late response; however, the 4th challenge caused not only early but also late airway obstruction at 2-8 h. Eosinophils, and CD4+ and CD8+ T lymphocytes were increased in the airway before the 4th but not before the 1st-3rd challenges. The numbers of IgE+/CD117+ (mast) cells were also increased in the lung before the 4th challenge. Levels of Th2 cytokines were also increased in the airway. Daily administration of dexamethasone during the challenge period suppressed all these inflammatory events. Thus, this experimental late asthmatic response is associated with Th2 cytokine production from inflammatory cells recruited as a consequence of the 1st-3rd challenges.

Airway Obstruction↗

Influences of excipients on in vitro release and in vivo performance of tetanus toxoid loaded polymer particles.

Protein instability during microencapsulation has been one of the major hurdles of biodegradable polymer particles-based vaccine delivery systems. In the present work, effect of serum albumin, sucrose and sodium bicarbonate on surface morphology, entrapment efficiency, in vitro release and in vivo performance tetanus toxoid (TT) loaded PLA particles were investigated. Use of serum albumin as well as high concentration of protein antigen ( approximately 60mg/ml) helped in protecting the immunoreactivity of the antigen during primary emulsification step of particle formulation. Incorporation of sucrose in the internal aqueous phase led to the reduction in encapsulation efficiency of TT from 43.8+/-4.3% to 27.3+/-3.6% in PLA particles and resulted with formation of particles having irregular surface characteristics. Addition of sodium bicarbonate along with sucrose during primary emulsion led to slight improvement in encapsulation efficiency of TT (34.3+/-3.2%) but affected the in vivo performance in terms of serum anti-TT antibody titers from single point immunization. Restoration of osmotic balance by adding equivalent amount of sucrose in external aqueous phase helped in preventing multiple emulsion instability and subsequently improved the encapsulation efficiency of TT to 63.1+/-4.2%. Maximum entrapment efficiency of TT up to 69.2+/-5.1% was achieved when serum albumin, sucrose and sodium bicarbonate were used in internal aqueous phase and sucrose was used in the external aqueous phase. Polymer particles entrapping tetanus toxoid along with optimal stabilizers showed burst release of immunoreactive antigen (>40% in early period) and elicited high and sustained anti-TT antibody titers from single point intramuscular immunization. Anti-TT antibody titers were further enhanced upon immunization of admixture of PLA particles and alum. Choice and use of stabilizers during particle formulation thus need careful considerations not only to protect the immunoreactivity of the antigen, but also to produce stable, uniform particles for optimal in vivo performances.

Adjuvants, Immunologic↗

Suitability of altai wildrye (Elymus angustus) and slender wheatgrass (Agropyron trachycaulum) for initial reclamation of saline composite tailings of oil sands.

The reclamation of freshly produced composite or consolidated tailings (CT) is a challenge for the Oil Sands Industry in the boreal forest of Western Canada. CT tailings materials are characterized by a relatively high salinity (dominated by sodium, sulphate and chloride) and a high pH (8-9). A greenhouse study was conducted to determine the germination, survival, injury and early plant growth of two grass species recommended for land reclamation, altai wildrye (Elymus angustus Trin) and slender wheatgrass (Agropyron trachycaulum Link Malte), growing in two different oil sand CT tailings (alum-CT and gypsum-CT), with and without peat amendment. Ion accumulation in the resulting plant tissues was determined. Our results showed that slender wheatgrass was most affected by the tailings at the germination stage, while for altai wildrye, the early growth stage was the most sensitive stage. Alum-CT had similar or less negative impact on plants than gypsum-CT. Amendment of CT with peat limited the reduction in germination and growth that was recorded in plants growing directly in CT. Based on these results, recommendations were made to improve reclamation strategies.

Agropyron↗