Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Alkenes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
PubMed2006

Reaction of alkenes with hydrogen-terminated and photooxidized silicon surfaces. A comparison of thermal and photochemical processes.

Reagentless micropatterning of hydrogen-terminated Si(111) via UV irradiation through a photomask has proven to be a convenient strategy for the preparation of ordered bicomponent monolayers. The success of this technique relies upon the differential rate of reaction of an alkene with the hydrogen-terminated and photooxidized regions of the surface. Monolayer formation can be accomplished under either thermal or photochemical conditions. It was observed that, after 3 h, reaction in neat alkene solution irradiation (Rayonet, 300 nm) afforded the expected patterned surface, while thermal conditions (150 degrees C) resulted in a partial loss of pattern fidelity. Monolayer properties and formation were studied on oxidized and hydrogen-terminated silicon under thermal and photochemical initiation, by contact angle, ellipsometry, Fourier transform infrared spectroscopy, high-resolution electron energy loss spectroscopy, and X-ray photoelectron spectroscopy. Results show that alkenes add to silanol groups on the silica surface in a manner consistent with acid catalysis: once attached to the surface, the silica oxidized the hydrocarbon.

Alkenes↗
PubMed2003

Simple iron catalyst for terminal alkene epoxidation.

[reaction: see text] A mu-oxo-iron(III) dimer, [((phen)(2)(H(2)O)Fe(III))(2)(mu-O)](ClO(4))(4), is an efficient epoxidation catalyst for a wide range of alkenes, including terminal alkenes, using peracetic acid as the oxidant. Low catalyst loadings, in situ catalyst preparation from common reagents, fast reaction times (<5 min at 0 degrees C), and enhanced reaction performance at high substrate concentrations combine to create a temporally and synthetically efficient procedure for alkene epoxidation.

Alkenes↗
PubMed2003

Ritter-type reactions of N-chlorosaccharin: a method for the electrophilic diamination of alkenes.

[reaction: see text] N-Chlorosaccharin has been shown to undergo electrophilic Ritter-type reactions with alkenes in acetonitrile. The resulting labile beta-chloro sulfonylamidines can be ring-opened and cyclized to imidazolines. Overall this provides a one pot method for the electrophilic diamination of alkenes. Competing aziridine formation as well as allylic chlorination are also observed depending on the nature of the alkene used.

Acetonitriles↗
PubMed2004

Iron(III) porphyrin catalyzed aziridination of alkenes with bromamine-T as nitrene source.

[reaction: see text] Iron(III) porphyrin complexes Fe(Por)Cl are effective catalysts for aziridination of alkenes using bromamine-T as the nitrene source. The catalytic system can operate under mild conditions with alkenes as limiting reagents. The aziridination reaction is general and suitable for a wide variety of alkenes, including aromatic, aliphatic, cyclic, and acyclic olefins, as well as alpha,beta-unsaturated esters. For 1,2-disubstituted olefins, the reactions proceeded with moderate to low stereospecificity.

Alkenes↗
PubMed1999

Carbometalations of simple alkenes with allyldibromoborane.

[formula: see text] The allylboration of alkenes with allyldibromoborane is described. Utilizing an improved methodology for the synthesis of allyldibromoborane, 1,3-dienes, styrene, and even isolated alkenes could be carbometalated in high yield regio- and stereospecifically at 0 degree C. This high reactivity of allyldibromoborane significantly expands the scope of carbometalations of alkenes.

Alkenes↗
PubMed2003

L-alanine-glyoxylate aminotransferase II of rat kidney and liver mitochondria possesses cysteine S-conjugate beta-lyase activity: a contributing factor to the nephrotoxicity/hepatotoxicity of halogenated alkenes?

Several halogenated alkenes are metabolized in part to cysteine S-conjugates, which are mitochondrial toxicants of kidney and, to a lesser extent, other organs. Toxicity is due to cysteine S-conjugate beta-lyases, which convert the cysteine S-conjugate into pyruvate, ammonia and a reactive sulphur-containing fragment. A section of the human population is exposed to halogenated alkenes. To understand the health effects of such exposure, it is important to identify cysteine S-conjugate beta-lyases that contribute to mitochondrial damage. Mitochondrial aspartate aminotransferase [Cooper, Bruschi, Iriarte and Martinez-Carrion (2002) Biochem. J. 368, 253-261] and mitochondrial branched-chain aminotransferase [Cooper, Bruschi, Conway and Hutson (2003) Biochem. Pharmacol. 65, 181-192] exhibit beta-lyase activity toward S -(1,2-dichlorovinyl)-L-cysteine (the cysteine S-conjugate of trichloroethylene) and S -(1,1,2,2-tetrafluoroethyl)-L-cysteine (the cysteine S-conjugate of tetrafluoroethylene). Turnover leads to eventual inactivation of these enzymes. Here we report that mitochondrial L-alanine-glyoxylate aminotransferase II, which, in the rat, is most active in kidney, catalyses cysteine S-conjugate beta-lyase reactions with S -(1,1,2,2-tetrafluoroethyl)-L-cysteine, S -(1,2-dichlorovinyl)-L-cysteine and S -(benzothiazolyl-L-cysteine); turnover leads to inactivation. Previous workers showed that the reactive-sulphur-containing fragment released from S -(1,1,2,2-tetrafluoroethyl)-L-cysteine and S -(1,2-dichlorovinyl)-L-cysteine is toxic by acting as a thioacylating agent - particularly of lysine residues in nearby proteins. Toxicity, however, may also involve 'self-inactivation' of key enzymes. The present findings suggest that alanine-glyoxylate aminotransferase II may be an important factor in the well-established targeting of rat kidney mitochondria by toxic halogenated cysteine S-conjugates. Previous reports suggest that alanine-glyoxylate aminotransferase II is absent in some humans, but present in others. Alanine-glyoxylate aminotransferase II may contribute to the bioactivation (toxification) of halogenated cysteine S-conjugates in a subset of individuals exposed to halogenated alkenes.

Alkenes↗
PubMed2000

Redesign of substrate-selectivity determining modules of glutathione transferase A1-1 installs high catalytic efficiency with toxic alkenal products of lipid peroxidation.

The evolution of proteins for novel functions involves point mutations and recombinations of domains or structural segments. Mimicking this process by rational design in vitro is still a major challenge. The present report demonstrates that the active site of the enzyme glutathione transferase (GST) A1-1 can be tailored for high catalytic efficiency with alkenals. The result is a >3,000-fold change in substrate selectivity involving a noteworthy change in preferred catalyzed reaction from aromatic nucleophilic substitution to Michael addition. The hydrophobic substrate binding pocket of GST A1-1 is formed by three structural modules, which were redesigned sequentially with four point mutations and the exchange of a helical segment. The substitutions were made to mimic first-sphere interactions with a substrate in GST A4-4, which naturally has high activity with alkenals. These substrates are toxic lipid peroxidation products of pathophysiological significance, and glutathione conjugation is a route of their inactivation. The final product of the sequential redesign of GST A1-1, mutant GIMFhelix, had a 300-fold increase in catalytic efficiency with nonenal and a >10 times decreased activity with 1-chloro-2,4-dinitrobenzene. In absolute values, GIMFhelix is more efficient than wild-type GST A4-4 with some alkenal substrates, with a k(cat)/K(m) value of 1.5 +/- 0. 1 10(6) M(-1) small middle dots(-1) for nonenal. The pKa value of the active-site Tyr-9 of GIMFhelix is 7.3 +/- 0.1, approaching the unusually low value of GST A4-4. Thus, rational redesign of the active-site region of an enzyme may be sufficient for the generation of efficient catalysts with altered chemical mechanism and novel selectivity.

Alkenes↗
PubMed1995

The high activity of rat glutathione transferase 8-8 with alkene substrates is dependent on a glycine residue in the active site.

Rat glutathione transferase (GST) 8-8 displays high catalytic activity with alpha, beta-unsaturated carbonyl compounds, including lipid peroxidation products such as 4-hydroxyalkenals. The catalytic efficiency of the related class Alpha GST 1-1 is substantially lower with the same substrates. Chimeric enzymes were prepared by replacing N-terminal subunit 8 segments of different lengths (6, 25, or 100 residues) with corresponding sequences from subunit 1 using recombinant DNA techniques. The chimeric subunit r1(25)r8, containing 25 amino acid residues from subunit 1, had the same low activity with alkenal substrates as that displayed by subunit 1. Mutation of Ala-12 into Gly in r1(25)r8 gave rise to the high alkenal activity characteristic of subunit 8, showing the importance of amino acid residue 12 for the activity. However, other structural determinants are also essential, as demonstrated by the corresponding Ala-12-->Gly mutation in subunit 1, which did not afford high alkenal activity. The results show that a single point mutation in a GST subunit may give rise to a 100-fold increase in catalytic efficiency with certain substrates. Introduction of such mutations may have contributed to the biological evolution of GST isoenzymes with altered substrate specificities and may also find use in the engineering of GSTs for novel functions.

Alkenes↗
PubMed1989

Biosynthesis of 1-alkenes in higher plants: stereochemical implications. A model study with Carthamus tinctorius (Asteraceae).

Odd numbered 1-alkenes, such as 1-pentadecene or 1,8,11,14-heptadecatetraene are formed from palmitic or linolenic acid by fragmentative decarboxylation. Incubation studies with germinating safflower (Carthamus tinctorius) and (2R,3R)-12-phenyl[2,3-2H2]dodecanoic acid, (2S,3S)-12-phenyl[2,3-2H2]dodecanoic acid, (2R)-12-phenyl[2-2H]dodecanoic acid and (2S)-12-phenyl[2-2H]dodecanoic acid instead of the natural alpha-linolenic acid precursor revealed the fragmentation to be an overall anti elimination of the 3-pro(S) hydrogen and the carboxyl group (anti-periplanar transition state geometry). Externally offered 3-hydroxy acids are not fragmented to 1-alkenes. The most probable mechanistic alternatives are in agreement with abstraction of the 3-pro(S) hydrogen as a radical followed by electron transfer and fragmentation, or transient insertion of oxygen into the 3-pro(S) C-H bond and subsequent fragmentation into an 1-alkene and CO2 after appropriate activation. The mechanism seems to be of general importance for the biosynthesis of vinylic substructures of natural products from oxygenated precursors.

Alkenes↗
PubMed2006

CO-alkene polymers are biocompatible scaffolds for primary urothelial cells in vitro and in vivo.

OBJECTIVE: To investigate CO-alkene polymers, novel synthetic nonbiodegradable polymers, as a potential biomaterial for urological applications. MATERIALS AND METHODS: Porcine urothelial cells were seeded on cover glasses (96 wells; 10 000 cells/well) coated with CO-alkene polymers [propylene/N-Acetyl-O'-(hex-5-enyl)-l-tyrosine ethyl ester/CO (PTCO) and hexene-CO (HxCO)]. The following conditions were investigated: cells seeded; (i) on PTCO, (ii) on HxCO, (iii) in PTCO-conditioned medium, (iv) in HxCO-conditioned medium, (v) on glass without polymers, (vi) on polystyrene, and (vii) on polystyrene treated with 1.25% NaCl (toxic control). Cell counts, cell death detection assay, and a cell activity assay (XTT, a tetrazolium-based colorimetric assay) were performed after 3, 6 and 9 days. Urothelial-cell seeded-PTCO films (0.5 x 10(6) cells/cm(2)) were implanted into the subcutaneous space of athymic mice for up to 12 weeks and unseeded PTCO polymers were implanted as a negative control. RESULTS: The urothelial cell adherence rates on the polymers were similar to those for glass and polystyrene. The cell activity (XTT assay) was higher in cells seeded on the polymers than in cells seeded on polystyrene and glass after 3 and 6 days. There were no significant differences between the apoptosis rates of all groups at the given sample times, except for the high levels in the toxic control. In vivo the urothelial cells survived on the polymers for 12 weeks with no adverse reactions in any of the mice. CONCLUSIONS: CO-alkene polymers are biocompatible materials for urothelial cells in vitro and in vivo, and thus are potential biomaterials for the urogenital tract.

Alkenes↗
PubMed1991

Effect of C6 to C9 alkenals on aflatoxin production in corn, cottonseed, and peanuts.

The effect on aflatoxin production in Aspergillus flavus-inoculated corn, cottonseed, and peanuts in static culture in the presence of gaseous phase C6 to C9 alkenals was investigated. Aflatoxin B1 production was stimulated in corn at the lowest alkenal concentration (1-microliters level) tested. Aflatoxin B1 was completely eliminated at the highest alkenal concentrations (20-microliters level) tested in both treated corn and cottonseed cultures.

Aflatoxins↗
PubMed1967

Degradation of hydrocarbons by members of the genus Candida. II. Oxidation of n-alkanes and l-alkenes by Candida lipolytica.

Candida lipolytica ATCC 8661 was grown in a mineral-salts hydrocarbon medium. n-Alkanes and 1-alkenes with 14 through 18 carbon atoms were used as substrates. Ether extracts of culture fluids and cells obtained from cultures grown on the various substrates were analyzed by thin-layer and gas-liquid chromatography. Analyses of fluids from cultures grown on n-alkanes indicated a predominance of fatty acids and alcohols of the same chain length as the substrate. In addition, numerous other fatty acids and alcohols were present. Analyses of saponifiable and nonsaponifiable material obtained from the cells revealed essentially the same products. The presence of primary and secondary alcohols, as well as fatty acids, of the same chain length as the n-alkane substrate suggested that attack on both the methyl and alpha-methylene group was occurring. The significance of these two mechanisms in the degradation of n-alkanes by this organism was not evident from the data presented. Analyses of fluids from cultures grown on 1-alkenes indicated the presence of 1,2-diols, as well as omega-unsaturated fatty acids, of the same chain length as the substrate. Alcohols present were all unsaturated. Saponifiable and nonsaponifiable material obtained from cells contained essentially the same products. The presence of 1,2-diols and omega-unsaturated fatty acids of the same chain length as the substrate from cultures grown on 1-alkenes indicated that both the terminal methyl group and the terminal double bond were being attacked.

Alcohols↗
PubMed1999

Analysis of alkenes by copper ion chemical ionization gas chromatography/mass spectrometry and gas chromatography/tandem mass spectrometry

A novel chemical ionization/fast atom bombardment (CI/FAB) source was used to analyse alkenes by chemical ionization mass spectrometry (CI-MS) using copper ions as the ionizing agent. The Cu(+)-CI mass spectra showed abundant pseudomolecular adduct ions [alkene-Cu](+) and characteristic fragment ions. Mass-analysed ion kinetic energy spectroscopy was used to study the product ions resulting from the decomposition of adduct ions and to eliminate background interferences derived from the copper ions. The major fragmentations permitted the localization of double bonds and minor fragments allowed the differentiation of alkene isomers. The CI/FAB source was coupled to a gas chromatograph and simple and complex mixtures of octene isomers were analysed by gas chromatography (GC)/Cu(+)-CI-MS and GC/Cu(+)-CI-MS/MS. Copyright 1999 John Wiley & Sons, Ltd.

Journal Article↗
PubMed2001

Catalytic Allylic Oxidation of Alkenes Using an Asymmetric Kharasch-Sosnovsky Reaction.

Kharasch and Sosnovsky reported the allylic oxidation of alkenes to give racemic allylic benzoates. This could be achieved efficiently using a tert-butyl perester as the oxidant, in the presence of a copper or cobalt salt. The use of C(2)-symmetric bis(oxazoline) ligands in the presence of copper(I) triflate with cyclic olefinic substrates gave the first synthetically useful asymmetric variant. The enantioselective control was good (up to 84 % ee) although yields were variable. In all cases the facial preference of the newly formed C-O bond was the same giving an S configuration at the allylic stereocenter. Lower stereocontrol was observed for large-ring alkenes and substantially reduced enantioselectivities were found with open-chain alkenes. This reaction has been further screened using a variety bis(oxazoline) and proline-derived ligands, which give a direct correlation between the chirality of the ligand and the enantioselectivity obtained. Individual substrates were found to be extremely sensitive to both the ligand structure and copper salt used as well as the presence of additives such as zinc, hydrazine, and molecular sieves.

Journal Article↗
PubMed2004

Catalytic Markovnikov and anti-Markovnikov functionalization of alkenes and alkynes: recent developments and trends.

The regioselective functionalization of terminal alkenes and alkynes is of utmost importance for the synthesis of a wide variety of organic products. Based on the original observation by Vladimir Markovnikov-the pioneer of this field of research-in the 19th century, the possible regioisomeric products are classified as Markovnikov or anti-Markovnikov products. Contrary to traditional belief, it is nowadays possible to control the regiochemistry of various additions of nucleophiles to alkenes and alkynes by applying different transition-metal catalysts. Recent developments in this area of selective functionalization of alkenes and alkynes are reviewed.

Journal Article↗
PubMed2004

Polyoxotungstate photoinduced alkylation of electrophilic alkenes by cycloalkanes.

Alkyl radical obtained by irradiation of tetrabutylammonium decatungstate in acetonitrile in the presence of cycloalkanes (C5H10, C6H12, C7H14) are efficiently trapped by electrophilic alkenes (acrylonitrile, isopropylydenmalonitrile, isopropylydencyanoacetate) to give the corresponding alkylated aliphatic nitriles. The reaction can be carried out up to complete conversion of the alkene with reasonable (in most cases 60-65 %) yields. Addition of the radicals to the alkene is followed by electron transfer from reduced decatungstate regenerating the sensitizer (turn over number up to 60). Steady-state measurements, EPR evidence, deuteration experiments and attempted intramolecular trapping of the adduct radical support the mechanistic proposal.

Journal Article↗
PubMed2005

A QM/MM study of the asymmetric dihydroxylation of terminal aliphatic n-alkenes with OsO4.(DHQD)2PYDZ: enantioselectivity as a function of chain length.

The dihydroxylation of terminal aliphatic n-alkenes catalyzed by OsO4(DHQD)2PYDZ ((DHQD)2PYDZ=bis(dihydroquinidine)pyridazine) has been computationally studied by the hybrid QM/MM IMOMM(Becke3LYP:MM3) method. The cases of propene, 1-butene, 1-pentene, 1-hexene, 1-heptene, 1-octene, 1-nonene, and 1-decene have been considered. A systematic treatment for the large number of possible conformations of the longer chain alkenes has been defined and applied, leading to the selection of approximately 1700 conformations to be computed. The IMOMM calculations of the transition states formed between these conformations and the catalyst generate enantiomeric excesses that closely resemble the experimental data of related systems, specifically in the preference for the R isomer and in its dependence on the chain length of the substrate. The selectivity increases sharply with the elongation of the short-chain alkenes until a ceiling value is reached, with further elongations having little effect on the enantiomeric excess (ee). These results are rationalized through the partitioning of the total energy of selected conformers, a process that leads to the identification of the most relevant regions of the catalyst and the characterization of the interactions critical for selectivity.

Journal Article↗
PubMed2004

Enantioselective hydrogenation of alkenes with iridium-PHOX catalysts: a kinetic study of anion effects.

In the asymmetric hydrogenation of unfunctionalized olefins with cationic iridium-PHOX catalysts, the reaction kinetics and, as a consequence, catalyst activity and productivity depend heavily on the counterion. A strong decrease in the reaction rate is observed in the series [Al[OC(CF3)3]4]- >BArF- >[B(C6F5)4]- >PF6- >>BF4- >CF3SO3-. With the first two anions, high rates, turnover frequencies (TOF >5000 h(-1) at 4 degrees C), and turnover numbers (TONs) of 2000-5000 are routinely achieved. The hexafluorophosphate salt reacts with lower rates, although they are still respectable; however, this salt suffers from deactivation during the reaction and extreme water-sensitivity, especially at low catalyst loading. Triflate and tetrafluoroborate almost completely inhibit the catalyst. In contrast to the hexafluorophosphate salt, catalysts with [Al[OC(CF3)3]4]-, BArF-, and [B(C6F5)4]- as counterions do not lose activity during the reaction and remain active, even after all the substrate has been consumed. In addition they are much less sensitive to moisture and, in general, rigorous exclusion of water and oxygen is not necessary. A first-order rate dependence on the hydrogen pressure was determined for the BArF- and the PF6- salts. At low catalyst loading, the rate dependence on catalyst concentration was also first order. The rate dependence on the alkene concentration was strikingly different for the two salts. While the reaction rate observed for the BArF- salt slightly decreased with increasing alkene concentration (rate order -0.2), a rate order of approximately 1 was determined for the corresponding hexafluorophosphate at low alkene concentrations.

Journal Article↗