Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “atomic force microscopy”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89Linked to original sources
PubMed2006

Solution-deposited microstructures based on aluminum-tris-hydroxyquinoline.

Iridescent organic films consisting of quasi-parallel wire-like microstructures are grown by castings from ethanol solutions containing mixtures of aluminium-tris-hydroxyquinoline and 1,10-phenanthroline. Spectrophotometric measurements carried out in the ultraviolet-visible range indicate that the microstructured films have angular-dependent optical behaviour, which is motivated by a refractive-index modulation over dimensions that are comparable to visible-light wavelengths. According to the results of investigations carried out by means of optical microscopy, atomic force microscopy (AFM), and scanning near-field optical microscopy (SNOM), the refractive-index modulation originates from a thickness modulation and a phase separation that occurs as the aluminium-tris-hydroxyquinoline and phenanthroline co-crystallize, with the former material being arranged to form a green luminescent pattern on the top of the latter one.

Journal Article↗
PubMedDate not supplied

The unique ribbon morphology of the major ampullate silk of spiders from the genus Loxosceles (recluse spiders).

The morphology of silk produced by recluse spiders (Loxosceles arizonica) was investigated by scanning electron microscopy, atomic force microscopy, and transmission electron microscopy. This silk consisted entirely of very long, thin ribbons of width 2-4 microm and thicknesses of no more than 40 nm. The correspondence in shape and dimension between the silk ribbons and the elongated aperture of the major ampullate spigot indicated that these ribbons were major ampullate silk. Selected area electron diffraction patterns from single ribbons were indexed with an orthorhombic unit cell (a = 9.43(2) A, b = 8.96(3) A, c = 6.96(1) A). This unit cell is in good agreement with that previously reported for synthetic poly(L-alanylglycine). Thus it is likely that the crystalline regions of the major ampullate silk of L. arizonica consist of an alternating glycine-L-alanine motif that has adopted a beta-sheet structure. The amino acid composition achieved with the silk of L. arizonica as well as that of L. laeta confirmed that the major amino acid constituents of this silk were glycine and L-alanine in nearly equal amounts. As it was noticed that the dry ribbons were highly electrostatic, it is suggested that the electrostatic interaction plays an important role in prey capture for Loxoseles.

Amino Acids↗
PubMed2006

Biological reduction of nanoengineered iron(III) oxide sculptured thin films.

Sculptured thin films (STFs) are assemblies of nominally identical, parallel nanowires with tailored shapes such as chevrons and spirals. A series of iron(lll) STFs were produced with varied crystallinity (from hematite toferrihydrite) and nanowire shapes (slanted columnar, clockwise helical, and counterclockwise helical). When the dissimilatory metal-reducing bacterium Shewanella putrefaciens CN32 was used to measure their bioreducibility, it was found that bioreduction was controlled primarily by oxide crystallinity. STFs were characterized by scanning electron microscopy, atomic force microscopy, and grazing incidence small-angle X-ray scattering. Postbioreduction characterizations determined that mineralogy of the film materials did not change, but surface roughness generally increased. Changes caused by bioreduction were assessed in terms of both transmittance and reflectance of light incident normal to the STFs. The greatest optical changes were obtained with crystalline hematite films. These results underscore the feasibility of an STF-based fiber optic iron(lll) reduction sensor for in situ subsurface deployment.

Ferric Compounds↗
PubMed2006

Organic-organic epitaxy of incommensurate systems: quaterthiophene on potassium hydrogen phthalate single crystals.

Hot-wall epitaxy and molecular-beam epitaxy have been employed for growing quaterthiophene thin films on the (010) cleavage face of potassium hydrogen phthalate, and the results are compared in terms of film properties and growth mode. Even if there is no geometrical match between substrate and overlayer lattices, these films are epitaxially oriented. To investigate the physical rationale for this strong orientation effect, optical microscopy, atomic force microscopy, and X-ray diffraction are employed. A clear correlation between the morphology of the thin films and the crystallographic orientation is found. The results are also validated by surface potential calculations, which demonstrate the primary role played by the corrugation of the substrate surface.

Journal Article↗
PubMed2006

Photochemically driven shape changes of crystalline organic nanorods.

Nanorods composed of 9-tert-butylanthroate (9-TBAE) are synthesized using an Al2O3 template and solvent annealing. The rods consist of micron-scale crystalline domains, and UV light induces a [4 + 4] photodimerization that results in a uniform 15% expansion along the rod axis. This is in contrast to random 9-TBAE crystals, which disintegrate under the same conditions. Transmission electron microscopy, atomic force microscopy, and comparison of the X-ray crystal structures of the monomer and photodimer all provide evidence for a mechanism based on a crystal-to-crystal photoreaction leading to an increase in molecular volume. It is likely that the high surface-to-volume ratio in the nanorods provides a strain relief pathway that is absent in larger crystals. Preliminary attempts to reverse the reaction using shorter wavelength light to photodissociate the dimers were only partly successful. These results suggest that crystalline organic nanostructures may provide an efficient way to transform photochemical energy into mechanical motion on the nanometer scale.

Journal Article↗
PubMed2006

Multicomponent polymer brushes.

This article describes a general synthetic route to laterally distinctive multicomponent polymer brushes on gold. The procedure involves repeated surface patterning using microcontact printing (muCP) of initiator-terminated thiols without backfilling with inert thiols and surface-initiated atomic transfer radical polymerization steps. In between brush growth, the remaining initiator moieties are deactivated to avoid reinitiation on existing brushes. Optical and fluorescence microscopy, atomic force microscopy, attenuated total reflectance Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy have been used to characterize every step of this procedure. We found that brushes can be grown from initiator-modified surfaces that contain bare gold areas and that these areas remain available for further patterning using muCP. To demonstrate the flexibility of this approach, surfaces containing four different polymer brushes in patterns ranging from 2 x 4 microm lines to 20 x 20 microm squares were fabricated. The range of chemical functionalities incorporated includes cationic and anionic polyelectrolytes, as well as thermally responsive polymers.

Journal Article↗
PubMed2006

Giant macrocycles composed of thiophene, acetylene, and ethylene building blocks.

Fully conjugated giant macrocyclic oligothiophenes with 60pi, 90pi,120pi, 150pi, and 180pi frames (1, 2, 3, 4 and 5) have been designed, and their butyl-substituted derivatives (1a, 2a, 3a, 4a, and 5a) have been synthesized using modified Sonogashira and McMurry coupling reactions as key steps. The 60-180pi systems 1-5 are circular with 1.8-6 nm inner cavities and 3.3-7.5 nm outside molecular diameters. Compound 1a containing ten 3,4-dibutyl-2,5-thienylene, eight ethynylene, and two vinylene units has been converted into macrocyclic oligo(3,4-dibutyl-2,5-thienylene-ethynylene) 6a using bromination/dehydrobromination procedure. Giant macrocycles 1a-6a exhibit a red shift of their absorption spectra and a fairly strong fluorescence with a large Stokes shift as compared to a linear conjugated counterpart having five thiophene rings. Compounds 1a-6a exhibit multistep reversible redox behaviors with fairly low first oxidation potentials, reflecting their cyclic conjugation. Furthermore, chemical oxidation of 1a-6a with FeCl3 shows drastic changes of spectroscopic properties due to intramolecular and intermolecular pi-pi interactions. Doping of 1a-3a with iodine forms semiconductor due to its pi-donor properties and pi-pi stacking ability. X-ray analysis of 1a confirmed a round, planar structure with nanoscale inner cavity, and revealed host ability for alkanes and unique packing structure. Interestingly, 2a and 3a self-aggregate in the solid state to form "molecular wires," which are about 200 nm thick and more than 1 mm long. The internal structures of fibrous aggregates have been investigated by optical microscope, scanning electron microscopy, atomic force microscopy, and X-ray diffraction analyses.

Acetylene↗
PubMed2005

Nature and properties of ultrathin nanocrystalline gold films formed at the organic-aqueous interface.

Ultrathin nanocrystalline films of gold formed at different temperatures at the organic-aqueous interface have been investigated by X-ray diffraction, electron microscopy, atomic force microscopy, and electronic spectroscopy. The films are smooth and continuous over relatively large length scales and are generally approximately 100 nm thick. The size of the nanocrystals is sensitive to the reaction temperature, which also determines whether the film is metallic or an activated conductor. The surface plasmon band of gold is highly red-shifted in the films. Alkanethiols perturb the structure of the films, with the magnitude of the effect depending on the chain length. Accordingly, the position of the plasmon band and the electrical resistance of the films are affected by interaction with alkanethiols; the plasmon band approaches that of isolated nanocrystals in the presence of long-chain thiols.

Journal Article↗
PubMed2005

Thermal behavior of polyelectrolyte multilayer microcapsules. 1. The effect of odd and even layer number.

The temperature-dependent behavior of hollow polyelectrolyte multilayer capsules consisting of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(styrene sulfonate) (PSS) with a different number of layers was investigated in aqueous media using confocal laser scanning microscopy, scanning and transmission electron microscopy, atomic force microscopy, and elemental analysis. Capsules with an even number of layers exhibited a pronounced shrinking at elevated temperature resulting in a transition to a dense sphere, whereas capsules with an odd number of layers swelled during heating to 5-fold of their initial size followed by their rupture. This effect increases for odd layer numbers and decreases for even layer numbers with increasing layer number. According to elemental analysis, an excess of PDADMAC monomers exists within the multilayers of capsules with an odd number of layers leading to a repulsion between the positive charges, whereas shells with an even number of layers have a balanced ratio between the oppositely charged polyions, so that the temperature-dependent behavior is controlled by the different interactions between polyelectrolytes and the bulk water. At a certain temperature, the polyelectrolyte material softens thus facilitating any rearrangement. Besides incubation temperature, the duration of heating has an influence on the restructuring of the multilayers.

Electrolytes↗
PubMed2006

Effect of substrate temperature on morphology and electrochemical performance of radio frequency magnetron sputtered lithium nickel vanadate films used as negative electrodes for lithium microbatteries.

Lithium nickel vanadate thin films were prepared by radio frequency magnetron sputtering at various substrate temperatures (Ts). These thin films have been investigated as anode electrode material in the use of microbatteries. Films were characterized by Rutherford backscattering spectroscopy, nuclear reaction analysis, Auger electron spectroscopy, glancing-incidence X-ray diffraction analysis, Raman spectroscopy, scanning electron microscopy, atomic force microscopy, and high-resolution transmission electron microscopy techniques. The anodic electrochemical performances of the films have been evaluated by cyclic voltammetry at a scan rate of 1 mV/s and by galvanostatic cycling, with lithium metal as the counter and the reference electrode, and cycled in the range of 0.02-3.0 V at a current density of 75 microA/cm2. Thin films prepared at a Ts of 650 degrees C show a discharge capacity at the 20th cycle of 1100 (+/-10) mAh/g, which exhibited excellent capacity retention with a small capacity fade.

Journal Article↗
PubMed2006

Raman imaging and Kelvin probe microscopy for the examination of the heterogeneity of doping in polycrystalline boron-doped diamond electrodes.

The issue of the heterogeneity of boron doping in microcrystalline diamond films was addressed by four different methods: micro-Raman spectroscopy and Raman imaging, Kelvin probe force microscopy, conducting atomic force microscopy, and scanning electrochemical microscopy. The samples were commercially available films from Windsor Scientific, with an average boron concentration of about 5 x 10(20) cm(-3). In agreement with previous works, all of the methods showed that the boron uptake was nonuniform across the surface of the electrode. Two different types of regions were evidenced, with metallic or semiconducting properties that were characterized with different types of Raman spectra. The line shape of these spectra was strongly dependent on the excitation wavelength. Local variations in electroactivity were evidenced by the SECM curves, which are related to the electronic properties of the individual grains, which, in turn, are governed by the boron content of the individual crystallites. In this study, two different micro-Raman imaging techniques were used that reveal the grain structure of the films: the images constructed from the diamond line intensity perfectly reproduced the optical image obtained by illuminating the sample in reflection. The method also allows detection of the presence of nondiamond carbon, especially in the metallic parts of the samples. Other spectral features (intensity of the boron-related broad lines, as well as the frequency and width of the diamond line) were used to construct images. In every case, the grain structure of the film was revealed, as well as twinning within individual crystallites. All approaches revealed that no enhanced doping or boron depletion occurred at the grain boundaries.

Journal Article↗
PubMed2005

In situ detection of birefringent mesoscopic H and J aggregates of thiacarbocyanine dye in solution.

Polarized-light microscopy, fluorescence microscopy, atomic force microscopy as well as absorption and fluorescence spectroscopy were used to characterize mesoscopic structures of both supramolecular H and J aggregates of 3,3'-disulfopropyl-5,5'-dichloro-9-methyl thiacarbocyanine dye in aqueous solution. Polarized-light microscopy visualizes in situ the mesoscopic morphology of the H and J aggregates and distinguishes between them by their own colors. The H aggregate having a fibrous structure showed negative birefringence, namely, the refractive index along the fiber short axis was higher than that of the long axis, so that pi-electron chromophores of the dye molecule are likely to orient along the short axis of the elongated fibers. The degree of birefringence of the H aggregate fiber was approximately -0.3. Investigations on the concentration dependence of the absorption spectra showed that the amount of J aggregates increased at the expense of a decrease in the amount of H aggregates. With respect to the J aggregates, a small dot morphology was observed at a relatively low dye concentration of 3.0 mM. With an increase of the dye concentration up to 10 mM, the morphology changed into mesoscopic fibers. In contrast, fluorescence microscopy for the fibrous J aggregates reveals that the constituent molecules are approximately aligned along the long axis of the fibers.

Journal Article↗
PubMed2005

Nanoparticle assembly at fluid interfaces: structure and dynamics.

The self-assembly of nanoparticles at fluid interfaces, driven by the reduction in interfacial energy, was investigated. With spherical, tri-n-octyl-phosphine-oxide covered cadmium selenide (CdSe) nanoparticles (1-8 nm), thermal fluctuations compete with the interfacial segregation giving rise to a size-dependent self-assembly of the particles. The structure of the nanoparticle assembly was studied using electron microscopy, atomic force microscopy, and X-ray scattering in situ, which indicate that the particles form a densely packed monolayer. The energetics of the adsorption of nanoparticles onto the interface was revealed by time-dependent fluorescence studies on a mixture of two different sized nanoparticles at the interface. The dynamics of the nanoparticles at the fluid interface, probed using fluorescence photobleaching methods, suggests a liquid-like behavior. The results have implications in the design of hierarchical self-assemblies of nanoparticles for the one-step fabrication of devices on multiple length scales.

Journal Article↗
PubMed2004

Gold nanoparticle embedded, self-sustained chitosan films as substrates for surface-enhanced Raman scattering.

In this work, self-sustained, biocompatible, biodegradable films containing gold nanostructures have been fabricated for potential application in nanobioscience and ultrasensitive chemical and biochemical analysis. We report a novel synthesis of gold nanoparticles mediated by the biopolymer chitosan. Self-supporting thin films are formed from the resultant gold-chitosan nanocomposite solutions and characterized by UV-visible surface plasmon absorption, transmission electron microscopy, atomic force microscopy, infrared absorption, and Raman scattering measurements. Results demonstrate control over the size and distribution of the nanoparticles produced, which is promising for several applications, including the development of biosensors. As a proof of principle, we demonstrate that gold-chitosan films can be employed in trace analysis using surface-enhanced Raman scattering.

Biocompatible Materials↗
PubMed2004

Sacrificial adhesion promotion layers for copper metallization of device structures.

The adhesion of copper films to adjacent device layers including TiN, Ta, and TaN diffusion barriers is a crucial reliability issue for integrated circuits. We report that ultrathin layers of poly(acrylic acid) (PAA) prepared on barrier surfaces or on the native oxide of Si wafers dramatically increase the interfacial adhesion of Cu films deposited by the H2 assisted reduction of bis(2,2,7-trimethyloctane-3,5-dionato)copper in supercritical carbon dioxide. Similar improvements were achieved on Si wafers using a simple vapor phase exposure of the substrate to acrylic acid prior to metallization. The deposited films and the substrate/Cu interfaces were analyzed by X-ray photoelectron spectroscopy (XPS), electron microscopy, atomic force microscopy, and variable-angle spectroscopic ellipsometry. No trace of the adhesion layer was detected at the interface, indicating it was sacrificial at the deposition conditions used. Moreover, the presence and subsequent decomposition of the PAA layer during deposition substantially reduced or eliminated metal oxides at the substrate interface. For depositions on PAA-treated Si wafers, copper was present primarily as Cu0 at the interface and Si was present only as Si0. On PAA-treated Ta substrates, XPS analysis indicated Ta was present primarily as Ta0 at the metallized interface whereas Ta2O5 dominated the interface of samples prepared without the adhesion layers. The technique can be extended to patterned substrates using adsorption of acrylic acid or thermal/UV polymerization of acrylic acid.

Acrylic Resins↗
PubMed2005

Morphology and oxygen sensor response of luminescent Ir-labeled poly(dimethylsiloxane)/polystyrene polymer blend films.

Polymer films consisting of a linear poly(dimethylsiloxane) end-functionalized with a luminescent Ir(III) complex (Ir-PDMS), blended with polystyrene (PS), function as optical oxygen sensors. The sensor response arises by quenching of the luminescence from the Ir(III) chromophore by oxygen that permeates into the polymer film. The morphology and luminescence oxygen sensor properties of blend films consisting of Ir-PDMS and PS have been characterized by fluorescence microscopy, atomic force microscopy, and scanning electron microscopy. The investigations demonstrate that microscale phase segregation occurs in the films. In blends that contain a relatively small amount of Ir-PDMS in PS (ca. 10 wt %), the Ir-PDMS exists as circular domains, with diameters ranging from 2 to 5 mum, surrounded by the majority PS phase. For larger weight fractions of Ir-PDMS in the blends, the film morphology becomes bicontinuous. A novel epifluorescence microscopy method is applied that allows the construction of Stern-Volmer quenching images that quantify the oxygen sensor response of the blend films with micrometer spatial resolution. These images provide a map of the oxygen permeability of the polymer blend films with a spatial resolution of ca. 1 mum. The results of this investigation show that the micrometer-sized Ir-PMDS domains display a 2-3-fold higher oxygen sensor response compared to the surrounding PS matrix. This result is consistent with the fact that PDMS is considerably more gas permeable compared to PS. The relationship of the microscale morphology of the blends to their performance as macroscale optical oxygen sensors is discussed.

Journal Article↗
PubMed2005

Scanning probe microscopic studies of the oriented attachment and membrane reconstitution of cytochrome C oxidase to a gold electrode.

Scanning probe microscopy was used to monitor the resulting surface of the oriented incorporation of cytochrome c oxidase into electrode supported lipid bilayer at four crucial stages with molecular resolution. We were able to reveal the formation of a densely packed monolayer of the active ester dithio(succiniimidylepropionate) (DTSP) and the covalent linkage of the nitrilotriacetic acid (NTA) to the thiol anchored DTSP by scanning tunneling microscopy. Atomic force microscopy investigations showed that the detergent solubilized oxidase is immobilized as monomers and small aggregates via histidine residues. Finally, the reconstitution of the proteins within the supported membrane was verified. The amount of oxidase immobilized within the solid supported membrane was estimated.

Electrodes↗
PubMed2006

Lithography for imprinting colored patterns with quantum dots.

In this article, we report a new form of lithography that involves a reaction between a gas and an ion embedded in a polymer film. The principle is based on a combination of top-down and bottom-up approaches in which a transmission electron microscope grid is placed on a poly(vinylpyrrolidone) film containing Cd2+ ions, which is then exposed to H2S gas. This leads to the generation of a fluorescent yellow pattern due to the formation of CdS nanoparticles on exposed parts of the film. Also, we have used the same method to generate patterns in two colors by starting with a green fluorescent dye incorporated into the film and following the same procedure in which patterned yellow-orange CdS nanoaparticles are distributed over the background fluorescence of the dye. We have used fluorescence microscopy, UV-vis and fluorescence spectroscopy, transmission electron microscopy, atomic force microscopy, and X-ray diffraction methods for the characterization of the products and patterns. This method could possibly be a fairly general method of generating patterned materials on 2D and 3D substrates.

Journal Article↗