Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Thermal Diffusion”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89Linked to original sources

Comparison of the annealing behavior of thin Ta films deposited onto Si and SiO2 substrates.

Structural changes at annealing temperatures (T(an)) of 500-1,100 degrees C were investigated for thin Ta films which were sputter-deposited onto pure Si substrates and onto thermally oxidized Si. In the as-deposited state, the Ta layers predominantly consist of metastable tetragonal beta-Ta, whereby the [001] texture is independent of the substrate material. At lower annealing temperatures, the microstructural evolution is essentially the same for both Ta films. Incorporation of O atoms causes an increase of the intrinsic compressive stress, and diffusion of C atoms into the Ta layer leads to the formation of Ta(2)C. Additionally, a partial transformation of the original beta-Ta phase into a second phase with tetragonal unit cell (denoted as beta'-Ta) occurs. For the Ta/Si system, the formation of a Ta-Si intermixing layer is initiated at T(an)=550 degrees C, and nucleation of crystalline TaSi(2) occurs at T(an)=620 degrees C. The formation of a second Ta silicide was not detected up to T(an)=900 degrees C. In the case of the Ta film deposited onto the SiO(2) substrate, the metastable beta-Ta and the beta'-Ta transform completely into the thermodynamically stable cubic alpha-Ta at T(an)=750 degrees C. A marked reaction with the substrate indicated by the formation of Ta(2)O(5) and Ta(5)Si(3) occurs at T(an)=1,000 degrees C.

Alloys↗

Effect of length, topology, and concentration on the microviscosity and microheterogeneity of DNA solutions.

The viscoelastic behavior of chromosomal DNA, which is heterogeneously distributed within the nucleus, may influence the diffusion of nuclear organelles and proteins. To identify some of the parameters that affect DNA viscoelasticity, we use the high-throughput method of multiple-particle nanotracking to measure the microviscosity and degree of heterogeneity of solutions of chromosomal DNA, linear DNA, and circular double-stranded DNA over a wide range of concentrations and lengths. The thermally excited displacements of multiple fluorescent microspheres imbedded in DNA solutions are monitored with 5nm spatial resolution and 30Hz temporal resolution, from which mean-squared displacement (MSD) and viscosity distributions are generated. For all probed DNA solutions but the most concentrated solution of the longest molecules, the ensemble-averaged MSD increases linearly with time at all probed time scales, a signature of viscous transport. The associated mean viscosity of the DNA solutions increases slowly with concentration for circular DNA and more rapidly for linear DNA, but more slowly than predicted by theory. The heterogeneity of the DNA solutions is assessed by computing the relative contributions of the 10%, 25%, and 50% highest values of MSD and viscosity to the ensemble-averaged MSD and viscosity. For both linear DNA and circular DNA, these contributions are much larger than observed in homogeneous liquids such as glycerol. The microheterogeneity of the linear DNA solutions increases with concentration more significantly for linear DNA than circular DNA. These in vitro results suggest that the topology, local concentration, and length of DNA influence the microrheology and microheterogeneity of the DNA within the nucleus.

3T3 Cells↗

Direct measurement of the thermal rate coefficient for electron attachment to ozone in the gas phase, 300-550 K: implications for the ionosphere.

Attachment of thermal electrons to O3 was studied in 133 Pa He between 300-550 K; the process is extremely inefficient. The rate coefficient increases sharply with temperature from 0.9 to 5 x 10(-11) cm(3) s(-1) (+/-30%) and comparison to kinetic energy measurements suggests internal energy can drive the reaction. These determinations account for competing processes of diffusion, recombination, and electron detachment reactions, and imply that no significant zero-energy resonance cross section exists, contradicting recent electron-beam results that call for substantial revision of ionospheric models.

Journal Article↗

[Disseminated Penicillium marneffei infection associated with AIDS, report of a case].

OBJECTIVE: To explore the clinical and laboratory features of disseminated Penicillium marneffei infection in patients with AIDS. METHODS: The HIV antibody in serum was assayed by both enzyme immunoassay (EIA) and Western immunoblot (WIB) methods. Morphology of the pathogenic fungus in smear and biopsy specimens of bone marrow was observed. The fungus was isolated from the patient's skin lesion and inoculated into the abdominal cavities of 2 rats and 2 mice. Twenty days later the rats and mice were killed and their viscera were taken out. Blood from the organs were cultured in Sabourand glucose agar at 25 degrees C and 37 degrees C. The colonies were observed. The morphology of the fungus was observed by microscopy and scanning electron microscopy. RESULTS: The most common clinical manifestations of Penicilium marneffei infection were fever, weight loss, anemia, papular skin lesion, hepatosplenomegaly, and lymphadenectasis. Yeast-like cells were found in the culture at 37 degrees C or in tissues. The fungi outside the host cells were elongated, often curved, sausage-like and with clear central septi. When cultured at 25 degrees C, the fungus was mycelia-like and produced a characteristic red pigment, diffusing into the medium. CONCLUSION: Disseminated Penicilliosis marneffei is one of the most important opportunistic infections in patients with AIDS in Southeast Asia and the southern part of China. Since there is no specific clinical manifestation for Penicillium marneffei infection, it is often misdiagnosed. Definite diagnosis requires culture of the pathogenic fungus from clinical specimens. The fungus is thermally dimorphic, produces red pigment, and is sausage-form with clear central septum outside the host cell. Amphotericin B and itraconazole are effective in treating Penicilliosis marneffei.

AIDS-Related Opportunistic Infections↗

Practical aspects of photodynamic therapy for superficial bladder carcinoma.

Most clinicians equate laser use with direct thermal ablation of tissue, but the precise spatial and temporal control of laser energy has made possible a number of diagnostic and therapeutic applications for these unique light sources that do not involve nonspecific thermal destruction of tissue. One such application is the detection and treatment of tissue with compounds that absorb specific types of light, known as photodynamic therapy (PDT). This article examines the practical aspects of PDT for the treatment of superficial bladder carcinoma with an emphasis on dosimetry. The results presented are encouraging and suggest that patient who have diffuse superficial bladder carcinoma refractive to standard treatment methods should be given the benefit of whole bladder PDT before commitment to radical extirpative surgery. Close attention to dosimetry will be required. PDT remains experimental at this stage; it has been approved for general use only in Canada, though filings with regulatory agencies in both the United States and Europe are anticipated in the near future.

Canada↗

Finite volume analysis of temperature effects induced by active MRI implants: 2. Defects on active MRI implants causing hot spots.

BACKGROUND: Active magnetic resonance imaging implants, for example stents, stent grafts or vena cava filters, are constructed as wireless inductively coupled transmit and receive coils. They are built as a resonator tuned to the Larmor frequency of a magnetic resonance system. The resonator can be added to or incorporated within the implant. This technology can counteract the shielding caused by eddy currents inside the metallic implant structure. This may allow getting diagnostic information of the implant lumen (in stent stenosis or thrombosis for example). The electro magnetic rf-pulses during magnetic resonance imaging induce a current in the circuit path of the resonator. A by material fatigue provoked partial rupture of the circuit path or a broken wire with touching surfaces can set up a relatively high resistance on a very short distance, which may behave as a point-like power source, a hot spot, inside the body part the resonator is implanted to. This local power loss inside a small volume can reach (1/4) of the total power loss of the intact resonating circuit, which itself is proportional to the product of the resonator volume and the quality factor and depends as well from the orientation of the resonator with respect to the main magnetic field and the imaging sequence the resonator is exposed to. METHODS: First an analytical solution of a hot spot for thermal equilibrium is described. This analytical solution with a definite hot spot power loss represents the worst case scenario for thermal equilibrium inside a homogeneous medium without cooling effects. Starting with this worst case assumptions additional conditions are considered in a numerical simulation, which are more realistic and may make the results less critical. The analytical solution as well as the numerical simulations use the experimental experience of the maximum hot spot power loss of implanted resonators with a definite volume during magnetic resonance imaging investigations. The finite volume analysis calculates the time developing temperature maps for the model of a broken linear metallic wire embedded in tissue. Half of the total hot spot power loss is assumed to diffuse into both wire parts at the location of a defect. The energy is distributed from there by heat conduction. Additionally the effect of blood perfusion and blood flow is respected in some simulations because the simultaneous appearance of all worst case conditions, especially the absence of blood perfusion and blood flow near the hot spot, is very unlikely for vessel implants. RESULTS: The analytical solution as worst case scenario as well as the finite volume analysis for near worst case situations show not negligible volumes with critical temperature increases for part of the modeled hot spot situations. MR investigations with a high rf-pulse density lasting below a minute can establish volumes of several cubic millimeters with temperature increases high enough to start cell destruction. Longer exposure times can involve volumes larger than 100 mm3. Even temperature increases in the range of thermal ablation are reached for substantial volumes. MR sequence exposure time and hot spot power loss are the primary factors influencing the volume with critical temperature increases. Wire radius, wire material as well as the physiological parameters blood perfusion and blood flow inside larger vessels reduce the volume with critical temperature increases, but do not exclude a volume with critical tissue heating for resonators with a large product of resonator volume and quality factor. CONCLUSION: The worst case scenario assumes thermal equilibrium for a hot spot embedded in homogeneous tissue without any cooling due to blood perfusion or flow. The finite volume analysis can calculate the results for near and not close to worst case conditions. For both cases a substantial volume can reach a critical temperature increase in a short time. The analytical solution, as absolute worst case, points out that resonators with a small product of inductance volume and quality factor (Q V(ind) < 2 cm3) are definitely save. Stents for coronary vessels or resonators used as tracking devices for interventional procedures therefore have no risk of high temperature increases. The finite volume analysis shows for sure that also conditions not close to the worst case reach physiologically critical temperature increases for implants with a large product of inductance volume and quality factor (Q V(ind) > 10 cm3). Such resonators exclude patients from exactly the MRI investigation these devices are made for.

Animals↗

Reaction diffusion models in one dimension with disorder.

We study a large class of one-dimensional reaction diffusion models with quenched disorder using a real space renormalization group method (RSRG) which yields exact results at large time. Particles (e.g., of several species) undergo diffusion with random local bias (Sinai model) and may react upon meeting. We obtain a detailed description of the asymptotic states (i.e., attractive fixed points of the RSRG), such as the large time decay of the density of each specie, their associated universal amplitudes, and the spatial distribution of particles. We also derive the spectrum of nontrivial exponents which characterize the convergence towards the asymptotic states. For reactions which lead to several possible asymptotic states separated by unstable fixed points, we analyze the dynamical phase diagram and obtain the critical exponents characterizing the transitions. We also obtain a detailed characterization of the persistence properties for single particles as well as more complex patterns. We compute the decay exponents for the probability of no crossing of a given point by, respectively, the single particle trajectories (theta) or the thermally averaged packets (theta). The generalized persistence exponents associated to n crossings are also obtained. Specifying to the process A+A--> or A with probabilities (r,1-r), we compute exactly the exponents delta(r) and psi(r) characterizing the survival up to time t of a domain without any merging or with mergings, respectively, and the exponents deltaA(r) and psiA(r) characterizing the survival up to time t of a particle A without any coalescence or with coalescences, respectively. theta, psi, and delta obey hypergeometric equations and are numerically surprisingly close to pure system exponents (though associated to a completely different diffusion length). The effect of additional disorder in the reaction rates, as well as some open questions, are also discussed.

Journal Article↗

Free radical decay kinetics in PMMA bone cement.

Electron-spin resonance has been used to measure the decay of the concentration of polymerization radicals in polymethyl methacrylate (PMMA) bone cement and the kinetics of the decay determined. Thermal annealing at various temperatures has shown that the logarithm of the concentration of radicals varies linearly with time, but with a nonzero intercept. These results have been analyzed by including both first- and second-order decay processes. The first-order process has an activation energy of 39 +/- 2 kcal/mol and is probably due to a diffusion-limited termination. The second-order process has an activation energy of 36 +/- 5 kcal/mol and is probably due to bimolecular termination.

Bone Cements↗

Photochemistry of Triton's atmosphere and ionosphere.

The photochemistry of 32 neutral and 21 ion species in Triton's atmosphere is considered. Parent species N2, CH4, and CO (with a mixing ratio of 3 x 10(-4) in our basic model) sublime from the ice with rates of 40, 208, and 0.3 g/cm2/b.y., respectively. Chemistry below 50 km is driven mostly by photolysis of methane by the solar and interstellar medium Lyman-alpha photons, producing hydrocarbons C2H4, C2H6, and C2H2 which form haze particles with precipitation rates of 135, 28, and 1.3 g/cm2/b.y., respectively. Some processes are discussed which increase the production of HCN (by an order of magnitude to a value of 29 g/cm2/b.y.) and involve indirect photolysis of N2 by neutrals. Reanalysis of the measured methane profiles gives an eddy diffusion coefficient K = 4 x 10(3) cm2/s above the tropopause and a more accurate methane number density near the surface, (3.1 +/- 0.8) x 10(11) cm-3. Chemistry above 200 km is driven by the solar EUV radiation (lambda < 1000 angstroms) and by precipitation of magnetospheric electrons with a total energy input of 10(8) W (based on thermal balance calculations). The most abundant photochemical species are N, H2, H, O, and C. They escape with the total rates of 7.7 x 10(24) s-1, 4.5 x 10(25) s-1, 2.4 x 10(25) s-1, 4.4 x 10(22) s-1, and 1.1 x 10(24) s-1, respectively. Atomic species are transported to a region of 50-200 km and drive the chemistry there. Ionospheric chemistry explains the formation of an E region at 150-240 km with HCO+ as a major ion, and of an F region above 240 km with a peak at 320 km and C+ as a major ion. The ionosphere above 500 km consists of almost equal densities of C+ and N+ ions. The model profiles agree with the measured atomic nitrogen and electron density profiles. A number of other models with varying rate coefficients of some reactions, differing properties of the haze particles (chemically passive or active), etc., were developed. These models show that there are four basic unknown values which have strong impacts on the composition and structure of the atmosphere and ionosphere. These values and their plausible ranges are the CO mixing ratio fco = 10(-4)-10(-3), the magnetospheric electron energy input (1 +/- 0.5) x 10(8) W, the rate coefficient of charge-exchange reaction N2(+) + C k = 10(-11)-10(-10) cm3/s, and the ion escape velocity Vi approximately equal to 150 cm/s.

Atmosphere↗

Physical properties of the E. coli 4.5S RNA: first results suggest a hairpin helix of unusual thermal stability.

Hyperchromicity measurements and quasi-elastic laser light scattering (QELS) have been used to assess the solution structure of the metabolically stable E. coli 4.5S RNA. Results from thermal denaturation measurements revealed the 4.5S species to be markedly more stable than most other RNAs characterized thus far. Optical Tm's range from 79 degrees to 88 degrees with transitions approximately 25 degrees C wide. The Tm values show little dependence on ionic strength, but stability is enhanced considerably by Mg+2. In the QELS experiments the diffusion coefficient does not decrease until T greater than 70 degrees C. Neither the diffusive melting nor the diffusion coefficient at infinite dilution (D0(20,w)) show dependencies on ionic strength but both are influenced by Mg+2. The diffusion behavior is in agreement with that predicted for a rigid cylindrical molecule 125 to 160 A long and 37 to 26 A in diameter. Taken together these results are consistent with the more stable hypothetical secondary structures that can be formed, in which 70-75% of the 114 bases are paired to form a single extended hairpin helix.

Base Sequence↗

Distal pocket residues affect picosecond ligand recombination in myoglobin. An experimental and molecular dynamics study of position 29 mutants.

Time courses for intramolecular NO and O2 recombination to native and three position 29 mutants of sperm whale myoglobins were measured after laser photolysis on picosecond and nanosecond time scales. The rates for the first phase of NO recombination were 1.8, 2.5, 29, and > or = 100 ns-1 for Ala29, Val29, Leu29 (native), and Phe29 myoglobin, respectively, at room temperature. This order is not correlated with the overall association rate constants for NO binding which were all in the range 20-50 x 10(6) M-1 s-1 and is the opposite of that observed for the rate constants for the overall thermal dissociation of NO which were 5.0, 2.8, 0.98, and 0.21 x 10(-4) s-1 for Ala29, Val29, Leu29 (native), and Phe29 myoglobin, respectively, at 20 degrees C. This inverse correlation suggests that photo- and thermally dissociated ligand molecules experience similar kinetic and equilibrium barriers to rebinding. The larger side chains of Leu29 and Phe29 inhibit rapid movement of the ligand away from the iron atom facilitating geminate recombination. The smaller side chains of Val29 and Ala29 increase the space available to the ligand, decreasing the rate of geminate recombination and enhancing complete dissociation. Diffusion of NO in the distal pocket of myoglobin was simulated using a variant of the molecular dynamics program CHARMM that includes the locally enhanced sampling protocol (Elber, R., and Karplus, M. (1991) J. Am. Chem. Soc. 112, 9161-9175; Roitberg, A., and Elber, R. (1991) J. Chem. Phys. 95, 9277-9287) and the x-ray structures of Carver et al. (Carver, T. E., Brantley, R. E., Jr., Singleton, E. W., Arduini, R. M., Quillin, M. L., Phillips, G. N., Jr., and Olson, J. S. (1992) J. Biol. Chem. 267, 14443-14450). Both accelerated (5,000 K) and room temperature ligands were used, and comparisons were made between simulations with a complete hydration shell surrounding the protein and those with only eight water molecules near the distal histidine. Photodissociated ligands initially move away from the heme plane, past Leu29, and toward Leu32, Phe33, Ile107, and Ile111. These theoretical results confirm that a complete description of picosecond ligand recombination must include the dynamics of ligand movement in the distal portion of the heme pocket.

Animals↗

Thermally activated mechanisms of hydrogen abstraction by growth precursors during plasma deposition of silicon thin films.

Hydrogen abstraction by growth precursors is the dominant process responsible for reducing the hydrogen content of amorphous silicon thin films grown from SiH(4) discharges at low temperatures. Besides direct (Eley-Rideal) abstraction, gas-phase radicals may first adsorb on the growth surface and abstract hydrogen in a subsequent process, giving rise to thermally activated precursor-mediated (PM) and Langmuir-Hinshelwood (LH) abstraction mechanisms. Using results of first-principles density functional theory (DFT) calculations on the interaction of SiH(3) radicals with the hydrogen-terminated Si(001)-(2x1) surface, we show that precursor-mediated abstraction mechanisms can be described by a chemisorbed SiH(3) radical hopping between overcoordinated surface Si atoms while being weakly bonded to the surface before encountering a favorable site for hydrogen abstraction. The calculated energy barrier of 0.39 eV for the PM abstraction reaction is commensurate with the calculated barrier of 0.43-0.47 eV for diffusion of SiH(3) on the hydrogen-terminated Si(001)-(2x1) surface, which allows the radical to sample the entire surface for hydrogen atoms to abstract. In addition, using the same type of DFT analysis we have found that LH reaction pathways involve bond breaking between the silicon atoms of the chemisorbed SiH(3) radical and the film prior to hydrogen abstraction. The LH reaction pathways exhibit energy barriers of 0.76 eV or higher, confining the abstraction only to nearest-neighbor hydrogens. Furthermore, we have found that LH processes compete with radical desorption from the hydrogen-terminated Si(001)-(2x1) surface and may be suppressed by the dissociation of chemisorbed SiH(3) radicals into lower surface hydrides. Analysis of molecular-dynamics simulations of the growth process of plasma deposited silicon films have revealed that qualitatively similar pathways for thermally activated hydrogen abstraction also occur commonly on the amorphous silicon growth surface.

Journal Article↗

Hyperbranched polymers as drug carriers: microencapsulation and release kinetics.

The aim of this work was to study the feasibility of hyperbranched polymers as drug carriers by employing different microparticle formation methods and the influence of loading methods on release kinetics. Commercially available hyperbranched polyester (Perstorp) and three polyesteramides (DSM) were loaded with the pharmaceutical acetaminophen. The gas antisolvent precipitation (GAS), the coacervation, and the particles from gas saturated solutions (PGSS) are among conventional processes that were used to prepare microparticles of drug-loaded hyperbranched polyesters for the first time. For preparing solid dispersions of drug-loaded hyperbranched polyesteramides the solvent method was applied. Infrared (IR) and differential thermal analysis (DTA) studies suggest that acetaminophen is partly dissolved in the polymer matrix and partly crystallized outside the polymer matrix. For acetaminophen-loaded polyesters prepared by the GAS method, the presence of free drugs is predominant when compared to microparticles prepared by the coacervation method. This event disappears for microparticles prepared by the PGSS method. Moreover, the release of drug from drug-loaded Bol-GAS is biphasic, where the initial burst (48%), indicating the presence of unincorporated drugs, is followed by a slow-release phase, suggesting the diffusion of drug through polymer matrices. The release of drugs from drug-loaded Bol-PGSS do not show this behavior since the drug is better dissolved or dispersed in polymer matrices. In the case of drug-loaded polyesteramides, coevaporates prepared from 3 hyperbranched structures (H1690, H1200, and H1500) using the solvent method result in different release kinetics. The hydrophobic characteristic of hyperbranched polyesteramide H1500 shows the biphasic release kinetic whereas the drug released from hydrophilic matrices H1690 and H1200 exhibits fast release comparable to that of pure drug.

Acetaminophen↗

Experimental and kinetic studies on methylene blue adsorption by coir pith carbon.

Varying the parameters such as agitation time, dye concentration, adsorbent dose, pH and temperature carried out the potential feasibility of thermally activated coir pith carbon prepared from coconut husk for removal of methylene blue. Greater percentage of dye was removed with decrease in the initial concentration of dye and increase in amount of adsorbent used. Kinetic study showed that the adsorption of dye on coir pith carbon was a gradual process. Lagergren first-order, second-order, intra particle diffusion model and Bangham were used to fit the experimental data. Equilibrium isotherms were analysed by Langmuir, Freundlich, Dubnin-Radushkevich, and Tempkin isotherm. The adsorption capacity was found to be 5.87 mg/g by Langmuir isotherm for the particle size 250-500 microm. The equilibrium time was found to be 30 and 60 min for 10 and 20 mg/L and 100 min for 30, 40 mg/L dye concentrations, respectively. A maximum removal of 97% was obtained at natural pH 6.9 for an adsorbent dose of 100 mg/50 mL and 100% removal was obtained for an adsorbent dose of 600 mg/50 mL of 10 mg/L dye concentration. The pH effect and desorption studies suggest that chemisorption might be the major mode of the adsorption process. The change in entropy (DeltaS0) and heat of adsorption (DeltaH0) of coir pith carbon was estimated as 117.20 J/mol/K and 30.88 kJ/mol, respectively. The high negative value of change in Gibbs free energy indicates the feasible and spontaneous adsorption of methylene blue on coir pith carbon.

Adsorption↗

Self-assembly prismatic aggregates formed during the calcination of ZnO powders: in situ monitoring by ETA technique and their photocatalytic properties.

This paper describes a unique phenomenon occurred during the calcination of ZnO powders, i.e., the ZnO particles self-assembled to form prismatic aggregates with a clear edges and faces. Field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) were used to characterize the particle morphology and crystal structure of the calcined sample. The emanation thermal analysis (ETA) technique was used to monitor the changes of ZnO particle surface and subsurface microstructure irregularities and the occurrence of interparticle compaction phenomena under in situ conditions of heating and cooling. It was assumed from the ETA results that the driven force of the self-assembly of ZnO particles towards prismatic aggregates originated from the solid state diffusion and migration of grain boundaries. The photocatalytic tests indicated that the prismatic aggregates of ZnO calcined at 800 degrees C demonstrated a highest photocatalytic activity for acetaldehyde decomposition because of the enhancement of the surface-exposed high-active crystal face of (101 0).

Journal Article↗

Type X collagen and other up-regulated components of the avian hypertrophic cartilage program.

Elucidating the cellular and molecular processes involved in growth and remodeling of skeletal elements is important for our understanding of congenital limb deformities. These processes can be advantageously studied in the epiphyseal growth zone, the region in which all of the increase in length of a developing long bone is achieved. Here, young chondrocytes divide, mature, become hypertrophic, and ultimately are removed. During cartilage hypertrophy, a number of changes occur, including the acquisition of synthesis of new components, the most studied being type X collagen. In this review, which is based largely on our own work, we will first examine the structure and properties of the type X collagen molecule. We then will describe the supramolecular forms into which the molecule becomes assembled within tissues, and how this changes its physical properties, such as thermal stability. Certain of these studies involve a novel, immunohistochemical approach that utilizes an antitype X collagen monoclonal antibody that detects the native conformation of the molecule. We describe the developmental acquisition of the molecule, and its transcriptional regulation as deduced by in vivo footprinting, transient transfection, and gel-shift assays. We provide evidence that the molecule has unique diffusion and regulatory properties that combine to alter the hypertrophic cartilage matrix. These conclusions are derived from an in vitro system in which exogenously added type X collagen moves rapidly through the cartilage matrix and subsequently produces certain changes mimicking ones that have been shown normally to occur in vivo. These include altering the cartilage collagen fibrils and effecting changes in proteoglycans. Last, we describe the subtractive hybridization, isolation, and characterization of other genes up-regulated during cartilage hypertrophy, with specific emphasis on one of these--transglutaminase.

Animals↗

Strand cleavage of supercoiled DNA by water-soluble peroxyl radicals. The overlooked importance of peroxyl radical charge.

It is well established that the peroxyl radicals formed during the thermal decomposition of 2,2'-azobis(amidinopropane), ABAP, in oxygenated water can cleave double-stranded DNA, from which fact it has been concluded that peroxyl radicals, as a general class, can induce DNA strand scission. However, the ABAP-derived radicals are positively charged, and DNA is a negatively charged polyanion. Moreover, the relatively small and, therefore, free to diffuse peroxyl radicals likely to be formed in vivo will generally be negatively charged or neutral. Plasmid supercoiled DNA [pBR 322, 4361 base pairs (bp)] was reacted with known, equal fluxes of two positively charged peroxyl radicals, a negatively charged peroxyl radical, and a neutral peroxyl radical. The two positively charged peroxyl radicals degraded >/=80% of the supercoiled pBR 322 at a flux of 4 radicals/bp, but the negatively charged and neutral peroxyl radicals had no significant effect even at a flux as high as 24 radicals/bp. The same lack of effect on the DNA was also observed with high fluxes of superoxide/hydroperoxyl radicals. Similar results were obtained with another supercoiled DNA, pUC 19, except that pUC 19 is somewhat more sensitive to strand scission by positively charged peroxyl radicals than pBR 322. We conclude that most of the peroxyl radicals likely to be formed in vivo have little or no ability to induce DNA strand scission and that the potential role of electrostatics in radical/DNA reactions should always be considered.

Animals↗

Self-similar renormalization approach to barrier crossing processes.

An algebraic self-similar renormalization method developed recently for summation of divergent field-theoretical series is applied to the thermally activated escape of a Brownian particle over an arbitrarily shaped barrier. Based on the Mel'nikov-Meshkov result for the underdamped Brownian motion and the inverse friction expansion of the underlying Fokker-Planck equation for strong friction, an overall rate formula is constructed. This formula agrees in the weak friction regime with the rate obtained from a diffusion equation in energy variables and, in the limiting case of strong friction with the rate following from a Smoluchowski equation. Its validity is tested for Brownian motion in bistable potentials with parabolic, cusped, and quartic barriers of different heights. The proposed formula is found to give a reasonable description of activated rate processes even though the barrier is quite low. Our comparison also includes results from various different crossover theories. In most of the cases considered the present formula is in considerably better agreement with exact numerical rates than the other interpolation formulas.

Journal Article↗