Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Compression Algorithms”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89Linked to original sources

Vibrography during tumor neurosurgery.

OBJECTIVE: The aim of this study was to determine whether elastography, a sonographically based real-time strain imaging method for registering the elastic properties of tissue, can be used in brain tumor surgery. METHODS: A modification of classic elastography called vibrography was applied in these measurements with static compression replaced by low-frequency axial vibration. Twenty patients were examined with this technique during brain tumor surgery. A conventional sonographic system with a custom-designed radio frequency (RF) interface was used. The RF data were digitized with a 50-MHz, 12-bit peripheral component interconnect analog/digital converter for real-time or offline processing. Sonographic RF data were acquired with a 6.5-MHz endocavity curved array. A special applicator equipped with a stepping motor moved the ultrasonic probe and produced a low-frequency mechanical vibration of approximately 5 to 10 Hz with a vibration amplitude of 0.3 mm. RESULTS: Detection of tumors was possible in 18 of 20 cases. Brain tissue was normally color coded orange or red. Three major groups of tumors with different elastic properties relative to brain tissue could be differentiated. In 3 cases, the stiffness of the tumor was identical to that of brain tissue, but the tumors were surrounded by a thin yellow border. Six tumors displayed higher strain than brain, whereas 7 tumors exhibited lower strain than the surrounding cerebrum. Two patients could not be assigned clearly to either of these groups. CONCLUSIONS: These findings indicate that vibrography is a feasible imaging method for brain tumor surgery and may have numerous potential applications in neurosurgery if further improvements are made.

Adult↗

Advances in computers and image processing with applications in nuclear medicine.

The continuing advances in hardware performance had made many previously computationally unattractive methods feasible, an example being iterative reconstruction in tomography, which is now routine. Dynamic SPECT can also be performed. However the aim of image processing is not just to produce pretty pictures, but to extract good clinical information. The methods also need to incorporate clinical knowledge and be defined using clinical constraints. In general data in nuclear medicine are n-D, often 3-D plus time. Data reduction for example by the extraction of physiological information, is important. Such data are in any case hard to visualise without compression, for example some kind of dimensionality reduction, going from n-D to a 2-D "functional" image. Both linear and non-linear operations can be considered. To extract physiological data, we need to fit models. Two classes of method are important: data driven and hypothesis driven. Examples of data driven methods are principal component analysis and factor analysis, where the model is derived form the data. Hypothesis driven methods are all implicitly or explicitly based on model fitting. A preliminary data driven step followed by an hypothesis driven approach could be called constrained statistical image analysis. Examples are shown as used in nuclear medicine and are being extended to MRI. Another important problem considered is that of multi-modality image registration and fusion. Although many methods exist, all based on the minimisation of an appropriate distance functions between 2 image data sets such as mutual information, additional constraints are required when the images are not so similar. Additional constraints can be imposed by means of cluster analysis of the n-dimensional feature space. In the analysis of such data, tests against reference data sets (atlases) are required, normally requiring warping the data sets in space, for example by the use of optic flow, or some kind of diffusion equation. Real time analysis of data during acquisition can lead to optimisation of acquisition procedures. Incorporation of such image analysis into a decision support system is desirable.

Algorithms↗

Angular velocity: a new method to improve prediction of ventricular fibrillation duration.

Ventricular fibrillation (VF) is a leading cause of sudden death. Electrical defibrillation is the primary modality of treatment, but evidence is accumulating that its use in the late stage of VF prior to providing ventilation, chest compressions and the administration of appropriate medication is detrimental. In VF of <5 min duration a 'shock first' strategy is effective. In VF of 5> min duration a 'perfuse first' approach is more effective. Because of the difficulty in determining the duration of VF in the clinical setting we have sought to develop method which analyze 5 s intervals of VF waveform and quickly provide an estimate of duration. Such methods would be useful in directing clinical interventions. Using methods of nonlinear dynamics and fractal geometry we have previously derived a quantitative measure of VF duration, namely the scaling exponent (ScE). In this study we report on a novel method also based on nonlinear dynamics, the angular velocity (AV). By constructing a flat, circular disk-shaped structure in a three-dimensional phase space and measuring the velocity of rotation of the position vector over time, a statistic is developed which rises from 58 rad/s at 1 min to 79 rad/s at 4 min and then decreases in a linear manner to 32 rad/s at 12.5 min. Using ScE and AV probability density estimated, VF of <5 min duration can be identified with 90% sensitivity on the basis of a single 5 s recording of the waveform. The combination of ScE and AV can be used in developing strategies for the treatment of VF during the different clinical phases of VF.

Algorithms↗

The Compressed Feature Matrix--a novel descriptor for adaptive similarity search.

The Compressed Feature Matrix (CFM) is a new molecular descriptor for adaptive similarity searching. Depending on the requirements, it is based on a distance or geometry matrix. Thus, the CFM permits topological and three-dimensional comparisons of molecules. In contrast to the common distance matrix, the CFM is based on features instead of atoms. Each kind of these features may be weighted separately, depending on its (estimated) contribution to the biological effect of the molecule. In this work, we show that the CFM allows us to adapt similarity evaluations to particular ligands as well as to classification requirements. The CFM method is analyzed regarding correctness, adaptivity and speed. Applying the basic setting of feature weights, the similarity evaluations using the CFM on the one hand and the Tanimoto coefficient together with MACCS Keys on the other yield similar results. However, in contrast to the latter method, the CFM even permits us to focus on small parts of molecules to serve as a basis for similarity. Accordingly, we have achieved striking results not only by readjusting the feature weights with regard to the scaffold but also to the side chain of the respective target. The results of the latter run turned out to be rather independent of the molecular scaffold. Hence, the CFM is suitable not only for common similarity evaluation, but also for techniques such as lead or scaffold hopping. Figure Chemical structure, feature graph and topological CFM of serotonine

Algorithms↗

Acute aortic occlusion--factors that influence outcome.

PURPOSE: The purpose of this study was to report our experience in the management of acute aortic occlusion and to analyze factors that influenced the outcome. METHODS: This was a retrospective analysis of 48 patients with acute aortic occlusion treated over a 19-year period. Presentation included limb ischemia in 34, acute abdomen in four, spinal cord compression-like symptoms in eight, and sudden onset of hypertension in two patients. Thrombosis was the cause of acute aortic occlusion in 44, and embolus in four patients. Acute thrombosis was associated with underlying atherosclerotic occlusive disease in 36 patients. In these, thrombosis was due to low-flow state caused by cardiac dysfunction or severe volume depletion. Thrombosed aneurysms caused aortic occlusion in two patients. Hypercoagulable state caused thrombosis of relatively normal aorta in six patients. Angiography in 39 patients revealed occlusion to be juxtarenal or infrarenal in 37 and suprarenal in two. Left ventricular function (LVF) was assessed in 42 patients. Circulation was restored in 45 (aortofemoral bypass in 22, axillofemoral bypass in 12, and thromboembolectomy in 11). This was not feasible in three patients. Additional surgical procedures were required in 29 patients (64%). RESULTS: The overall mortality rate was 52% (25 of 48). Of the 20 patients with severely compromised LVF, 17 died (85%). In contrast, only five (23%) deaths occurred among 22 with good LVF. Among 29 patients who required additional operations, 18 died (62%). All four patients with embolic occlusion survived. Patients with normal LVF but hypercoagulable state had dismal outcome--only one of the six survived. CONCLUSIONS: Acute aortic occlusion is infrequent. Presentation may be varied, thus delaying diagnosis. Poor LVF, thrombosis of arteries below the inguinal ligament or of visceral arteries, and "hypercoagulable state" portend ominous prognosis.

Acute Disease↗

A mathematical high bar-human body model for analysing and interpreting mechanical-energetic processes on the high bar.

The aims of this study were: 1. To study the transfer of energy between the high bar and the gymnast. 2. To develop criteria from the utilisation of high bar elasticity and the utilisation of muscle capacity to assess the effectiveness of a movement solution. 3. To study the influence of varying segment movement upon release parameters. For these purposes a model of the human body attached to the high bar (high bar-human body model) was developed. The human body was modelled using a 15-segment body system. The joint-beam element method (superelement) was employed for modelling the high bar. A superelement consists of four rigid segments connected by joints (two Cardan joints and one rotational-translational joint) and springs (seven rotation springs and one tension-compression spring). The high bar was modelled using three superelements. The input data required for the high bar human body model were collected with video-kinematographic (50 Hz) and dynamometric (500 Hz) techniques. Masses and moments of inertia of the 15 segments were calculated using the data from the Zatsiorsky et al. (1984) model. There are two major phases characteristic of the giant swing prior to dismounts from the high bar. In the first phase the gymnast attempts to supply energy to the high bar-humanbody system through muscle activity and to store this energy in the high bar. The difference between the energy transferred to the high bar and the reduction in the total energy of the body could be adopted as a criterion for the utilisation of high bar elasticity. The energy previously transferred into the high bar is returned to the body during the second phase. An advantageous increase in total body energy at the end of the exercise could only be obtained through muscle energy supply. An index characterising the utilisation of muscle capacity was developed out of the difference between the increase in total body energy and the energy returned from the high bar. A delayed and initially slow but even reduction of hip and shoulder angles provided more advantageous release conditions. The total body energy could be improved by up to 15%, the vertical CM release velocity by up to 10% and the angular momentum by up to 35%.

Algorithms↗

The redundant nature of locomotor optimization laws.

A sagittal-plane model of the lower limb, which considered the possibility of antagonistic and synergistic muscle action and took account of the load-bearing roles of the cruciate ligaments, was applied to a dynamic analysis of level walking. It was hypothesized that: (1) the simple, one-sided constraints that intra-articular contact forces must be compressive and muscle and ligament forces tensile substantially reduce the redundancy of the load-transmitting structures of the lower limb, (2) many previously proposed optimization laws for muscle selection yield equivalent results, when they are applied to a finite set of admissible limiting solutions, and (3) the aforementioned optimization laws, when applied to a finite set of admissible limiting solutions, do not adequately predict the co-contraction of antagonistic muscles during gait. The problem of indeterminacy was resolved by considering all possible limiting solutions of the system unknowns on the dynamic equations. Although 498 limiting solutions of nine unknowns could arise at each sampled point on the gait cycle, the aforementioned one-sided constraints ruled out the large majority of them. It was shown that of the 498 possible, the minimum number of simultaneous admissible solutions for any subject was as few as three and the maximum number was only 18. The Principles of minimal total muscle force, squared muscle force, muscle stress, intra-articular contact force and instantaneous muscle power predicted remarkably similar patterns of muscle activity over the gait cycle. Of the six tested performance criteria, the Principle of minimal total ligament force was the least successful in terms of selecting solutions that closely matched the EMG patterns. This result implied that the muscles do not always act to protect the knee ligaments during gait. Finally, each of the above minimum principles failed to predict any antagonistic quadriceps-hamstrings action at the knee and hip around the event of heelstrike, although such activity was indicated by electromyography.

Adult↗

Measurements of acoustic dispersion on calcaneus using spilt spectrum processing technique.

The speed of sound (SOS) has become a useful tool in osteoporosis assessment, since it represents a combination of density and compressibility of bone tissue and should provide better information on bone quality and an estimate the fracture risk. In general, the speed of sound on dispersive material, such as bone tissue, depends strongly on frequency. Therefore, a measurement of velocity dispersion magnitude (VDM) might provide more important bone structure information than measurements of bone mineral density (BMD), SOS or broadband ultrasound attenuation (BUA). To obtain the velocity dispersion magnitude requires a sequence of pulses that have a frequency that is different from that used in conventional approaches. The measurement is complicated by the fact that pulse waveform will distort as the pulses propagate through the frequency-dependent medium. Alternatively, the phase velocity and velocity dispersion measurements also can be obtained on frequency-domain processing. However, the accuracy of those techniques is affected by the 2mpi ambiguity in the phase unwrapping process in frequency domain. And the spectrum approach is highly dependent on the gating window selection in time domain signals. The time-domain split spectrum processing (SSP) technique is proposed here to measure the phase velocity and the VDM. The SSP technique is also used to measure the SOS and VDM of two commercial calcaneus phantoms. Simulation results are in good agreement with the preset parameters of a model-based signal obtained using the SSP technique. In addition, in vitro SSP measurements agree with the manufacturer's specifications for two commercial calcaneus phantoms. The negative dispersion is also found in in vivo measurements on human heel. Finally, an approach based on the time domain SSP technique has potential clinical applications for osteoporosis diagnosis.

Algorithms↗

Efficacy of a new ketoconazole bioadhesive vaginal tablet on Candida albicans.

To develop more effective treatment for vaginal candidasis, ketoconazole (KTZ) was formulated in bioadhesive tablet formulations that increase the time of contact of drug with the vaginal mucosa. The bioadhesive vaginal tablets delivery of KTZ was prepared by direct compression of sodium carboxymethyl cellulose or polyvinylpyrrolidone or hydroxypropylmethyl cellulose (HPMC-E(50)). Dissolution studies of bioadhesive tablets and commercial ovules were carried out with a new basket method (horizontal rotating basket). In vitro, a good sustained release action was obtained with bioadhesive tablets containing 1:1 and 1:2 drug/polymer ratio using HPMC-E(50). These bioadhesive tablets containing 400 mg of KTZ showed a zero-order drug release kinetic. KTZ solutions at increasing concentrations (0.16, 0.33, 0.5 and 0.66 mg/ml) were prepared for microbiological trials. These concentrations correspond to 25%, 50%, 75% and 100% of KTZ released from bioadhesive tablets, respectively. Yeast mixture was mixed with each concentration of KTZ at ratio of 1:10. One hundred microliters of this mixture was transferred in 900 microl liquid Sabouraud medium after a certain time interval for each concentration of KTZ and incubation at 37 degrees C for 24 h. Then this culture streaked onto Sabouraud-dextrose-agar plates, which were incubated at 37 degrees C for 48 h. The 0.16 and 0.33 mg/ml concentrations of KTZ showed fungistatic effect in 120 min. The 0.5 mg/ml concentration of KTZ was fungistatic in 90 and 120 min; and the 0.66 mg/ml concentration of the drug was fungistatic in 120 min as well as in 180 min. It was found that, in vitro antifungal activity of KTZ was dependent on its concentration and contact time with yeast cells. These results indicated that a new bioadhesive vaginal tablet formulations might be further developed for safe convenient and effective treatment of vaginal candidasis.

Adhesives↗

Optimizing timing of ventricular defibrillation.

OBJECTIVE: Our intent was to evolve a prognosticator that would predict the likelihood that an electrical shock would restore a perfusing rhythm. Such a prognosticator was to be based on conventional electrocardiographic signals but without constraints caused by artifacts resulting from precordial compression. The adverse effects of "hands off" intervals for rhythm analyses would therefore be minimized. Such a prognosticator was further intended to reduce the number of electrical shocks and the total energy delivered and thereby minimize postresuscitation myocardial dysfunction. DESIGN: Observational study. SUBJECTS: Medical research laboratory of a university-affiliated research and educational institute. SUBJECTS: Domestic pigs. INTERVENTIONS: Ventricular fibrillation was induced in an established porcine model of cardiac arrest. Recordings of scalar lead 2 over the frequency range of 4-48 Hz were utilized. The area under the curve representing the amplitude and frequency was defined as the amplitude spectrum area (AMSA). MEASUREMENTS AND MAIN RESULTS: A derivation group of 55 animals yielded a threshold value of AMSA that uniformly predicted successful resuscitation. A separate group of 10 animals, a validation group, confirmed that an AMSA value of 21 mV.Hz predicted restoration of perfusing rhythm after 7 of 8 electrical shocks and failure of electrical conversion in 21 of 23 electrical shocks, yielding sensitivity and specificity of about 90%. The negative predictive value of AMSA was 95% and statistically equivalent to that of coronary perfusion pressure, mean amplitude, and median frequency. The positive predictive value that would prompt continuation of cardiopulmonary resuscitation without interruption for an unsuccessful defibrillation attempt was greatly improved with AMSA (78%) as compared with coronary perfusion pressure (42%), mean amplitude (32%), and median frequency (29%). CONCLUSION: AMSA has the potential for guiding more optimal timing of defibrillation without adverse interruption of cardiopulmonary resuscitation or the delivery of unsuccessful high energy electrical shocks that contribute to postresuscitation myocardial injury.

Algorithms↗

[Computer analysis of conformational and physicochemical percularities of sequences cleaved by DNA topoisomerase I].

After complexation of DNA with enzymes a specific adaptation of DNA structure including its partial or nearly complet melting, change of sugar-phosphate backbone structure, stretching, compression, bending or kinking, flipping out of nucleotides from the DNA helix, etc. take place. The full set of such changes is specific for each individual enzyme and is a very important for effective adjustment of reacting orbitals of enzyme and specific DNA atoms with accuracy up to 10-15 degrees. Efficiency of DNA sequence adaptation in the direction providing by enzyme depends on many specific structural characteristics of DNA. Maximal adjustment of DNA structure can be achieved only for specific sequences, therefore on going from nonspecific to specific DNAs the increase of the catalytic rate by 4-8 orders of magnitude takes place. DNA topoisomerase I is a sequence-dependent enzyme, but it can cleave with lower efficiency DNA sequences, which are significantly different from an optimal one. We have carried out the computer analysis of structural characteristics of many DNA sequences utilizing by topoisomerase using the method which is based on the analysis of conformational and physico-chemical characteristics of DNA helix and gives a detailed information about similarities or differences of DNA structural units. In addition to such characteristics as base tilt angle, shift of base pair, helix steering angle, and helix step for all cleaved sequences the presence of sterically disadvantageous contacts in small grove between N3 and NH2 of guanines and N3 of adenines were detected which corresponds to the presence Py-Pu dinucleotides in the cleavaged site. In addition, for optimal sequences bending of DNA helix toward major groove is characterized. The proposed method seems to be a very perspective for the analysis of an efficiency of nucleic acids cleavage by different DNA- and RNA-dependent enzymes.

Algorithms↗

Assessment of deep vein thrombosis or pulmonary embolism by the combined use of clinical model and noninvasive diagnostic tests.

Deep vein thrombosis (DVT) and pulmonary embolism (PE) are relatively common diseases and are amenable to therapy but with a potentially fatal outcome if untreated. The diagnosis can be made in most patients with use of the noninvasive imaging tests, but limitations exist. The standard first choice of investigation in patients with suspected DVT is compression ultrasonography (CUS). As with all tests, there is a potential for false-positive and false-negative results. The latter are especially an issue for calf vein thrombi, and this in part has led to the concept of serial CUS testing of the proximal venous system and not imaging of the calf. The premise of the repeat (serial) CUS test is that only thrombi that extend to the proximal system are clinically relevant, and these thrombi will be detected during subsequent testing. However, despite the safety of the serial CUS testing concept, it is inconvenient and expensive. The standard first choice of investigation in patients with suspected PE, the ventilation-perfusion (V/Q) lung scan is nondiagnostic in most cases. In the past few years, the diagnostic process has improved because of the validation of clinical models that accurately categorize patients as having low (5%), moderate (20% to 30%), or high probability (>60%) for venous thromboembolic disease. Among the improvements this provides is the elimination of serial CUS testing if the ultrasound results are normal and the clinical probability is low in patients with suspected DVT. In patients with suspected PE in whom further testing is necessary, determination of clinical probability allows selection of invasive (angiography) or noninvasive testing (serial ultrasound) in patients with non-high-probability V/Q scans. The fibrin degradation product D-dimer has had a high negative predictive value; negative results with enzyme-linked immunosorbent assay (ELISA) tests effectively rule out DVT or PE. In addition, a negative result with less-sentive D-dimer testing and a low clinical probability excludes DVT or PE.

Algorithms↗

Hematogenous pyogenic spinal infections and their surgical management.

STUDY DESIGN: Mainly a retrospective study of 101 cases of pyogenic spinal infection, excluding postoperative infections. Data were obtained through medical record review, imaging examination, and patient follow-up evaluation. SUMMARY OF BACKGROUND DATA: Hematogenous pyogenic spinal infection has been described variously as spondylodiscitis, discitis, vertebral osteomyelitis, and epidural abscess. Recommended treatment options have included conservative methods (antibiotics and bracing) and surgical intervention. However, a comprehensive classification that would aid in diagnosis, treatment planning, and prognosis has not yet been devised. OBJECTIVES: To analyze the bacteriology, pathologic entities, complications, and results of treatment options for pyogenic spinal infection. METHOD: All patients received plain radiographs, gadolinium-enhanced magnetic resonance imaging scans, and bone/gallium radionuclide studies. All patients had tissue biopsies. Bacteriology, hematology, and predisposing factors were analyzed. All patients received intravenous and oral antibiotics. A total of 58 patients underwent surgery. Patient outcomes were correlated with clinical status, with treatment method and, where applicable, with location and nature of epidural compression. Statistical analyses were performed. RESULTS: Spondylodiscitis occurred most commonly with primary epidural abscess, spondylitis, discitis, and pyogenic facet arthropathy, all occurring rarely. Staphylococcus aureus was the main organism. Infection elsewhere was the most common predisposing factor. Leukocyte counts were elevated in 42.6% of spondylodiscitis cases. The erythrocyte sedimentation rate was elevated in all cases of epidural abscess. There were 35 cases of epidural abscess (frank abscess, 29; granulation tissue, 6). Epidural abscess complicating spondylodiscitis occurred most often in the cervical spine, followed by thoracic and lumbar areas. The rate of paraplegia or paraparesis also was highest in cervical and thoracic regions. There were no cases of quadriplegia. All patients with either epidural granulation tissue or paraparesis recovered completely after surgical decompression. Only 18% of patients with frank epidural abscess and 23% of patients with paralysis recovered completely after surgical decompression. Patients with spondylodiscitis who were treated nonsurgically reported residual back pain more often (64%) than patients treated surgically (26.3%). CONCLUSIONS: Pyogenic spinal infection can be thought of as a spectrum of disease comprising spondylitis, discitis, spondylodiscitis, pyogenic facet arthropathy, and epidural abscess. Spondylodiscitis is more prone to develop epidural abscesses in the cervical spine (90%) than the thoracic (33.3%) or lumbar (23.6%) areas. Thecal sac neurocompression has a greater chance of causing neurologic deficit in the thoracic spine (81.8%). Treatment of neurologic deficit caused by epidural abscess is prompt surgical decompression, with or without fusion. Patients with frank abscess had less favorable outcomes than those with granulation tissue, and paraplegia responded to treatment more poorly than paraparesis. Surgery was preferable to nonsurgical treatment for improving back pain.

Abscess↗

An asymptotic solution for the contact of two biphasic cartilage layers.

This study addresses the hypothesis that interstitial fluid plays a major role in the load support mechanism of articular cartilage. An asymptotic solution is presented for two contacting biphasic cartilage layers under compression. This solution is valid for identical thin (i.e. epsilon = h'/a'0 << 1), frictionless cartilage layers, and for the 'early' time response (i.e. t' << (h')2/HAk) after the application of a step load. An equilibrium asymptotic solution is also presented (i.e.t'-->infinity). Here h' is the thickness, a'0 is a characteristic contact radius, HA is the aggregate modulus and k is the permeability of the cartilage layer. A main conclusion from this analysis is that the fluid phase of cartilage plays a major role in providing load support during the first 100-200 s after contact loading. Further, the largest component of stress in cartilage is the hydrostatic pressure developed in the interstitial fluid. For tissue fluid volume fraction (porosity) in the range 0.6 < or = phi f < or = 0.8, k = O(10(-15) m4/Ns) and HA = O(1 MPa), the peak magnitude of the principal effective (or elastic) stress may be as low as 14% of the peak hydrostatic pressure within the tissue, or the contact stress at the surface. In effect, the interstitial fluid shields the solid matrix from high normal stresses and strains. The asymptotic solution also shows that pressure-sensitive film measurements of intra-articular contact stress do not measure the elastic stress at the surface, but they rather provide a measure of the interstitial fluid pressure. Finally, this analysis provides strong support for the hypothesis that, if sudden loading causes shear failure within the cartilage-bone layer structure, this failure would take place at the cartilage-bone interface, and the plane of failure would be either parallel or perpendicular to this interface.

Adhesiveness↗

[Prosthesis: indications, contraindications and follow-up].

The use of stents or endoprostheses to treat tracheobronchial obstruction is firmly established. The most important indication for stent placement are inoperable stenoses of the central airways, whose main component is extrinsic compression due to malignant, less frequently to benign disease. In experienced hands the short- and long-term results are excellent. When considering stent placement the functional benefit for the patient should be highly likely. With respect to this, the parameters to be assessed before and in regular intervals after stent placement include a physical examination, a chest roentgenogram or a CT scan, pulmonary function tests, bronchoscopy, and quality of life. Of all the various stents on the market the cylindrical silicone stent designed by Dumon is the one most widely used and represents the standard against which all other models have to compete. Expandable metal stents have advantages over most silicone stents through their thin walls and their excellent adaptability to greatly varying airway diameters. The current development of covered expandable stents should make it possible to combine the good biocompatibility known of silicone stents with the excellent flexibility and favorable wall to inner diameter ratio of the metal stents. This development will make expandable stents much more versatile for the treatment of malignant and benign obstructions of the central airways. Effective sealing of fistulas in airways without a concomitant obstructive component is another most welcome indication for this type of stents. The future might well belong to hybrid stents with metallic components and a smooth synthetic covering of silicone or polyurethane. The ongoing research in stents shows that the "ideal stent" for all purposes does not exist and probably never will. Quite often the specific stent type needed can only be determined during therapeutic endoscopy. Every specialist practicing in the area of stenting should therefore have an armamentarium of a few different types available and use the one best indicated in a specific situation.

Airway Obstruction↗

Modeling of adhesion in tablet compression. II. Compaction studies using a compaction simulator and an instrumented tablet press.

Adhesion problems are usually not identified until prolonged compression runs are studied near the end of the drug development process. During tablet manufacturing, adhesion problems encountered are usually addressed by statistically designed experiments based on experience. It would be a significant benefit for the pharmaceutical industry if adhesion problems could be identified early in drug development based on molecular considerations of the drug substance and/or prototype formulations. Drug substance-punch face interactions were reported in the first of the articles in this series, and focused on the elucidation of adhesion problems in tablet compression. It was hypothesized that the intermolecular interactions between drug molecules and the punch face was the first step (or criterion) in the adhesion process, and that the rank order of adhesion during tablet compression should correspond with the rank order of these energies of interaction. That is, the interaction between the molecular structure of the drug and the metal surface determines the primary interaction event or relative potential for adhesion, while the mechanical processes and/or lubrication effects may subsequently impact the extent of adhesion. Molecular simulations and atomic force microscopy were used to establish the rank order of the work of adhesion of a series of profen compounds. The results predicted that the relative degree of drug substance-punch face adhesion should decrease in the order of ketoprofen > ibuprofen > flurbiprofen. In this study, the authors investigated whether the rank order of the work of adhesion established on the molecular level and interparticulate level holds true in the tableting environment by measuring tablet take-off force, ejection force, and visual observation of the punch surfaces for both pure drug compacts and formulated tablets. The compaction simulator was used for pure profen compacts, while the instrumented tablet press for formulated tablets. Due to the inability to extract the adhesion force component from the total ejection force measurement, tablet ejection force was not used as a criterion to judge the adhesion behavior of the model compounds. The criteria used for judgement of punch face adhesion were tablet take-off force and visual observation of the punch faces. The rank order of adhesion for both pure drug and formulated tablets was determined to follow the order of ketoprofen > ibuprofen > flurbiprofen. The effect of run time on adhesion behavior was also investigated. Therefore, the rank order of the punch-face adhesion tendencies for the series of profen compounds was determined, and found to agree with the data from the predictive methods reported in the first article.

Adhesiveness↗

Value of assessment of pretest probability of deep-vein thrombosis in clinical management.

BACKGROUND: When ultrasonography is used to investigate deep-vein thrombosis, serial testing is recommended for those who test negative initially. Serial testing is inconvenient for patients and costly. We aimed to assess whether the calculation of pretest probability of deep-vein thrombosis, with a simple clinical model, could be used to improve the management of patients who present with suspected deep-vein thrombosis. METHODS: Consecutive outpatients with suspected deep-vein thrombosis had their pretest probability calculated with a clinical model. They then underwent compression ultrasound imaging of proximal veins of the legs. Patients at low pretest probability underwent a single ultrasound test. A negative ultrasound excluded the diagnosis of deep-vein thrombosis whereas a positive ultrasound was confirmed by venography. Patients at moderate pretest probability with a positive ultrasound were treated for deep-vein thrombosis whereas patients with an initial negative ultrasound underwent a single follow-up ultrasound 1 week later. Patients at high pretest probability with a positive ultrasound were treated whereas those with negative ultrasound underwent venography. All patients were followed up for 3 months for thromboembolic complications. FINDINGS: 95 (16.0%) of all 593 patients had deep-vein thrombosis; 3%, 17%, and 75% of the patients with low, moderate, and high pretest probability, respectively, had deep-vein thrombosis. Ten of 329 patients with low pretest probability had the diagnosis confirmed, nine at initial testing and one at follow-up. 32 of 193 patients with moderate pretest probability had deep-vein thrombosis, three diagnosed by the serial (1 week) test, and two during follow-up. 53 of 71 patients with high pretest probability had deep-vein thrombosis (49 by the initial ultrasound and four by venography). Only three (0.6%) of all 501 (95% CI 0.1-1.8) patients diagnosed as not having deep-vein thrombosis had events during the 3-month follow-up. Overall only 33 (5.6%) of 593 patients required venography and serial testing was limited to 166 (28%) of 593 patients. INTERPRETATION: Management of patients with suspected deep-vein thrombosis based on clinical probability and ultrasound of the proximal deep veins is safe and feasible. Our strategy reduced the need for serial ultrasound testing and reduced the rate of false-negative or false-positive ultrasound studies.

Algorithms↗

On modeling center of foot pressure distortion through a medium.

The center of foot pressure (COP) is a commonly used output measure of the postural control system as it is indicative of the systems stability. A dense piece of foam, i.e., a sponge, can be used to emulate random environmental conditions that distort the ground reaction forces received and interpreted by the cutaneous sensors in the feet; thus introducing uncertainty into the control system. In this paper, the density and size of the sponge was selected such that a subject's weight did not cause full compression. In general, the COP is measured from the bottom of the sponge. As the sponge is used to distort ground reaction forces, it is reasonable then to assume that the COP signal would also be distorted. The use of other sensory information to identify state of balance, and compute necessary balance adjustments, is therefore required. In addition to a sponge, many different types of specialized footwear and inserts are used for people with peripheral neuropathy, such as diabetics. However, it is difficult to design diabetic footwear without a better understanding of the mechanical and physiological effects that different surfaces typical of outdoor terrains, such as a sponge, which cannot be predicted without the sense of the foot, have on balance. Therefore, the goal of this study was to investigate the change of the COP signal from the top and bottom of the sponge. Portable force sensing mats from Vista Medical were used to obtain the COP from the top and bottom of the sponge. The COP measured on the bottom of the sponge is not the same as the COP measured on the top, particularly in the medial-lateral direction. Several linear and nonlinear models were used to identify the unknown plant; i.e., the sponge. Overall, the nonlinear neural network method had superior performance when compared with the linear models. Thus, the results indicate that the signals from the top and bottom of the sponge are in fact different, and furthermore, they are nonlinearly related. A nonlinear mathematical model is proposed which describes COP distortion through a medium such as a sponge. Although the values for the model parameters determined were for a particular sponge, this study suggests that a neural network plant identification model may be applied to any medium other than the sponge; the information can then be used to determine how the balance control model is affected given the sensory information received.

Adult↗