Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Thermal Diffusion”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88Linked to original sources

Controlled release of vancomycin from biodegradable microcapsules.

Poly D,L-lactic acid (PLA) and its copolymers with glycolide PLGA 90:10 and 70:30 were polymerized under various conditions to yield polymers in the molecular weight range 12000-40000 daltons, as determined by gel permeation chromatography. Vancomycin hydrochloride was the hydrophilic drug of choice for the treatment of methicillin resistant Staphyloccoccal infections. It was microencapsulated in the synthesized polymers using water-oil-water (w/o/w) double emulsion and solvent evaporation. The influence of microcapsule preparation medium on product properties was investigated. An increase in polymer-to-drug ratio from 1:1 to 3:1 caused an increase in the encapsulation efficiency (i.e. from 44-97% with PLGA). An increase in the emulsifier (PVA) molecular weight from 14-72 kD caused an increase in encapsulation efficiency and microcapsule size. The in vitro release of vancomycin from microcapsules in phosphate buffer saline (pH 7.4) was found to be dependent on molecular weight and copolymer type. The kinetic behaviour was controlled by both diffusion and degradation. Sterilization with 60Co (2.5 Mrad) also affected the degradation rate and release profiles. Degradation of microcapsules could be seen by scanning electron microscopy, by the increase in the release rate from PLA and by the decrease in the Tg values of microcapsules. In vitro bactericidal effects of the microcapsule formulations on S. aureus were determined with a special diffusion cell after the preparations had been sterilized, and were found to have bactericidal effects lasting for 4 days.

Anti-Bacterial Agents↗

Imaging of water distribution in thermally fractured granites by SPRITE.

Water distribution in thermally fractured granite samples was visualized by using SPRITE sequences. Networks of intergranular fractures were observed in the coarse-grained Inada granite after heating at 873 K or above. On the other hand, bright spots were observed in the fine-grained Okazaki granite, which may be due to pore water in feldspar grains. D2O diffusion into samples saturated with H2O was also observed by 2D-projected SPRITE imaging.

Diffusion↗

Somatosensory auras in focal epilepsy: a clinical, video EEG and MRI study.

PURPOSE: To determine the clinical characteristics of somatosensory auras (SSA) and analyse features of seizure semiology predictive for localization in focal neocortical and limbic epilepsy. METHODS: This study analyses the clinical, video-EEG and MRI imaging features of 75 consecutive patients with focal epilepsy who described somatosensory auras at seizure onset to determine the frequency and localising value of SSAs in different types of focal epilepsy. Sensory characteristics, somatotopic distribution, evolution of the auras and subsequent ictal features in relation to MRI and EEG findings were analysed. RESULTS: The incidence of SSAs in 600 patients with focal epilepsy was 12%. Seventy-five patients were studied further: 77% reported tingling. Pain, thermal changes and a sense of movement or pulling were also reported. Distal unilateral auras in the hand and arm (46%) were most frequent and associated with a contralateral centroparietal focus. Contralateral auras were reported in 62% of lesional cases, focal cortical dysplasia was the commonest pathology in operated cases. Bilateral auras were associated with more diffuse pathologies or parasagittal foci. Evolution was centrifugal, somatotopic and usually unilaterally confined. Subsequent motor semiology was postural tonic, unilateral clonic, psychomotor or secondary generalized. CONCLUSION: SSA are highly correlated with centroparietal epilepsy but may occur in temporal lobe, mesial frontal and multifocal epilepsy. A lesional etiology including discrete dysplasias, tumours, ischemic and postencephalitic gliosis is likely.

Adolescent↗

Intermittent drying of bioproducts--an overview.

Unlike the conventional practice of supplying energy for batch drying processes at a constant rate, newly developed intermittent drying processes employ time-varying heat input tailored to match the drying kinetics of the material being dried. The energy required may be supplied by combining different modes of heat transfer (e.g. convection coupled with conduction or radiation or dielectric heating simultaneously or in a pre-selected sequence) in a time-varying fashion so as to provide optimal drying kinetics as well as quality of the bioproduct. This is especially important for drying of heat-sensitive materials (such as foods, pharmaceutical, neutraceutical substances, herbs, spices and herbal medicines). Intermittent heat supply is beneficial only for materials which dry primarily in the falling rate period where internal diffusion of heat and moisture controls the overall drying rate. Periods when little or no heat is supplied for drying allow the tempering period needed for the moisture and heat to diffuse within the material. As the moisture content increases at the surface of the biomaterial during the tempering period, the rate of drying is higher when heat input is resumed. It is possible to control the heat input such that the surface temperature of the product does not exceed a pre-determined value beyond which thermal damage of the material may occur. This process results in reduction in the use of thermal energy as well as the mass of air used in convective drying. Thus, the thermal efficiency of such a process is higher. The quality of the product, as such color and ascorbic acid content, is also typically superior to that obtained with a continuous supply of heat. However, in some cases, there will be a nominal increase in drying time. In the case of microwave-assisted and heat pump drying, for example, the capital cost of the drying system can also be reduced by drying in the intermittent mode. This paper provides an overview of the basic process, selected results from experiments and mathematical models for a variety of biomaterials dried in a wide assortment of dryers. It begins with a classification of intermittent drying processes that may be applied e.g. time-varying temperature, air flow rate, operating pressure as well as heat input by different modes and in different temporal variations. The beneficial effects of improving the quality of dried bioproducts by different intermittent processes are also included and discussed.

Biological Factors↗

Characterization of pepsin-resistant collagen-like tail subunit fragments of 18S and 14S acetylcholinesterase from Electrophorus electricus.

Digestion of 18S and 14S acetylcholinesterase from eel electric organ with pepsin at 15 degrees C for 6 h results in extensive degradation of the catalytic subunits, but a major portion of the collagen-like tail structure associated with these enzyme forms resists degradation. The pepsin-resistant structures partially aggregate and can be isolated by gel exclusion chromatography on Sepharose CL-6B in buffered 1 M sodium chloride. The largest structure, denoted F3, has a molecular weight of 72 000 according to gel electrophoresis in sodium dodecyl sulfate and is composed of three 24 000 molecular weight polypeptides linked by intersubunit disulfide bonds. This structure is largely, but not completely, a collagen-like triple helix as indicated by a circular dichroism spectrum typical of triple-helical collagen and an amino acid composition characterized by 27% glycine, 5% hydroxyproline, and 5% hydroxylysine. Continued pepsin action results in degradation of the disulfide linkage region such that disulfide-linked dimers F2 and finally F1 monomers become the predominant forms in sodium dodecyl sulfate. Digested samples in which either F3 or F2 predominate have virtually identical circular dichroic spectra and amino acid compositions and generate similar diffuse 24 000 molecular weight polypeptides following disulfide reduction. Thus the intersubunit disulfide linkages in F3 must occur close to the end(s) of the fragment polypeptide chains. Pepsin conversion of F3 to F2 is particularly accelerated between 25 and 30 degrees C, suggesting that the triple-helical structure in the disulfide linkage region undergoes thermal destabilization in this temperature range. Digestion at 40 degrees C yields presumably triple-helical F1 structures devoid of disulfide linkages, although their degradation to small fragments can be detected at this temperature. The question of whether the three tail subunits that give rise to F1 polypeptides are identical remains open.

Acetylcholinesterase↗

[Application of high-speed thermovisor TV-03 to rapid diagnosis of focal pathology of the nervous system].

The equipment for, and methods of thermovisional examinations developed by the authors and used in 300 patients with focal pathologies of the central and peripheral nervous system are described. In patients with intracranial processes, local changes of the skin temperature on the head usually correlating with the loci of the brain pathology are revealed. The correlation between the asymmetry of the thermal fields and the tumour localization in relation to the brain surface was found to be regular. Peculiarities of the thermographic picture are described with reference to the histobiological characteristics of the tumours. In meningiomas, the zone of the increased luminosity was rounded, homogenous and distinctly outlined; in gliomas reaching the brain surface, this zone is diffuse and less intense. Thermovisional characteristics of traumatic meningeal hematomas with regard to the time of their formation are presented. Acute hematomas were characterized by a lowered skin temperature above them, chronic ones by a brighter luminosity in the zone of their localization. For the first time the thermovisional syndrome of the traumatic foci of brain contusion and smashing is described. Thermovisional appearance of spinal cord tumours, intervertebral disc hernias, injures of peripheral nerves, etc. is also presented.

Adolescent↗

Interaction between indometacin and beta-cyclodextrin.

CHINOIN-137 consists of indometacin and beta-cyclodextrin in a 1 : 2 molar ratio. solid phase analytical techniques, as thermal analysis, mass spectrometry and X-ray powder diffraction do not support the existence of a well-defined crystalline complex. However this product dissolved in water more readily and results in a higher indometacin concentration than indometacin itself. The formation of an inclusion complex with a reasonable stability in aqueous solution was proved by diffusion tests and chiroptical properties. Following oral administration of CHINOIN-137 to rats, higher blood levels (by about 25%) of indometacin can be achieved than with the uncomplexed drug. A significant difference was observed in the absorption of 14C-labelled indometacin and its cyclodextrin complex by "in loco" techniques in the small intestines of anaesthetized rats: from indometacin 56%, from the complex 68% of the activity was resorbed within 10 min.

Animals↗

Research on annihilation of cancer cells by glass-ceramics for cancer treatment with external magnetic field. I. Preparation and cytotoxicity.

Ferrimagnetic glass-ceramics were prepared as a heating mediator for hyperthermia in cancer treatment. We prepared glasses in the system 40Fe2O3-30CaO-30SiO2 and precipitated ferrimagnetic crystallites through controlled two-step heat treatment. To improve the heating capability of ferrimagnetic crystallites, i.e., magnetite, generation of other crystalline phases should be prohibited. The addition of each 1% of P2O5 and B2O3 led to lowering the crystallization temperature of magnetite, which was useful to suppress the other crystalline formation. The maximum nucleating and crystal growth rates were 20.47 x 10(6)/mm2 x s at 690 degrees C and 8.125 nm/min(0.5) at 940 degrees C, respectively. After nucleation at 690 degrees C for 60 min prior to crystal growth at 940 degrees C for 2 h, samples exhibited the following properties: crystallite size of 90.5 nm, the maximum volumetric fraction of 31.1%, and saturation magnetization of 100 emu/cm2. The coercive forces were ranged between 382.0 and 388.2 Oe in all heat-treatment conditions. As a result of a preclinical evaluation of biocompatibility by agar diffusion test with L929 cells, both as-quenched and heat-treated glasses could be biocompatible.

Bone Substitutes↗

Copper/solder intermetallic growth studies.

Copper samples, hot solder (eutectic) dipped and thermally aged, were cross-sectioned and placed in an environmental scanning electronic microscope (ESEM). While in the ESEM the samples were heated for approximately 2.5 h at 170 degrees C to stimulate the growth of additional Cu/Sn intermetallic compound. The intent of the study was to obtain a continuous real-time videotape record of the diffusion process and compare the observations to static SEM images reported to represent long-term, naturally aged intermetallic growth. The video obtained allows the observation of the diffusion process and relativistic growth phenomena at the Cu, Cu3Sn, Cu6Sn5, and solder interfaces as well as effects on the bulk Cu and solder. Effects contrary to earlier reports were observed; for example, growth rates of Cu3Sn were found to greatly exceed those of Cu6Sn5.

Alloys↗

A biodegradable injectable thermoplastic for localized camptothecin delivery.

Camptothecin is an example of a potent drug with a short half-life that would benefit from a localized drug depot system that maintains its stability prior to being released. For this reason, a thermoplastic, biodegradable polymer drug depot was prepared and characterized, and the in vitro release of camptothecin examined. epsilon-Caprolactone oligomers were prepared by ring-opening polymerization initiated by various alcohols. The polymers were characterized via differential scanning calorimeter (DSC) for thermal transitions, and via a parallel plate rheometer for melt viscosity. Camptothecin was loaded into the oligomers and released into PBS buffer. The viscosity of the oligomers was alterable by the initiator used. The oligomers were semi-crystalline with melting points between 37 and 45 degrees C. Camptothecin was released from the oligomers in a diffusion-controlled manner, with the release rate increasing as the melt viscosity of the oligomer decreased. The unreleased camptothecin remained in its active lactone form for a period of up to 16 weeks.

Biocompatible Materials↗

Commercial double-indicator-dilution densitometer using heavy water: evaluation in oleic-acid pulmonary edema.

We evaluated a commercially available, double-indicator-dilution densitometric system for the estimation of pulmonary extravascular water volume in oleic acid-induced pulmonary edema. Indocyanine green and heavy water were used as the nondiffusible and diffusible tracers, respectively. Pulmonary extravascular water volume, measured with this system, was 67% of the gravimetric value (r = 0.91), which was consistent with values obtained from the radioisotope methods. The measured volume was not influenced by changes in cardiac index over a range of 1 to 4 L.min.m2. This system is less invasive than the thermal-dye technique and has potential for repeated clinical measurements of pulmonary extravascular lung water and cardiac output.

Animals↗

Cometary origin of carbon and water on the terrestrial planets.

An early high-temperature phase of the protosolar accretion disk is implied by at least three different telltales in chondrites and confirmed by peculiarities in the dust grains of comet Halley. The existence this high-temperature phase implies a large accretion rate hence a massive early disk. This clarifies the origin of the Kuiper Belt and of the Oort cloud, those two cometary populations of different symmetry that subsist today. Later, when the dust sedimented and was removed from the thermal equilibrium with the gas phase, a somewhat lower temperature of the disk explains the future planets' densities as well as the location beyond 2.6 AU of the carbonaceous chondrite chemistry. This lower temperature remains however large enough to require an exogenous origin for all carbon and all water now present in the Earth. The later orbital diffusion of planetesimals, which is required by protoplanelary growth, is needed to explain the origin of the terrestrial biosphere (atmosphere, oceans, carbonates and organic compounds) by a veneer mostly made of comets.

Carbon↗

Effect of heterogeneity in fracture permeability on the potential for liquid seepage into a heated emplacement drift of the potential repository.

A numerical model was used to investigate the effect of spatial variability in fracture permeability on liquid seepage and moisture distribution in the vicinity of a waste emplacement drift in the unsaturated zone (UZ) of Yucca Mountain. The model is based on a two-dimensional, cross-sectional, dual-permeability model of the unsaturated zone at Yucca Mountain and uses a stochastic approach to investigate the effect of small-scale heterogeneous features. The studies were conducted using one uniform fracture permeability case, three realizations of stochastically generated fracture permeability, one discrete permeability feature case, and one increased ambient liquid flux case. In all cases, the models predict that completely dry drift conditions will develop above and below the drift in 10-100 years and remain dry for 1000-2000 years. During this period, the models predict no seepage into drifts, although liquid flux above the drifts and within the drift pillars may increase by up to two orders of magnitude above ambient flux. This is because the heat released by the emplaced waste is sufficient to vaporize liquid flux of one to two orders of magnitude higher than present-day ambient flux for over 1000 years. The results also show that unsaturated zone thermal-hydrological (TH) models with uniform layer permeability can adequately predict the evolution of seepage and moisture distribution in the rock mass surrounding the repository drifts. The models further show that although variability in fracture permeability may focus and enhance liquid flow in regions of enhanced liquid saturation (due to condensation above the drifts), vaporization and vapor diffusion can maintain a dry environment within the drifts for thousands of years.

Geological Phenomena↗

Spectral diffusion in the tunneling spectra of ligand-stabilized undecagold clusters.

We report diffusion in the tunneling spectra of isolated, ligand-stabilized undecagold (Au11) clusters immobilized by attachment to alpha,omega-alkanedithiolate tethers inserted into alkanethiolate self-assembled monolayers. We use scanning tunneling microscopy and spectroscopy at cryogenic (UHV, 4 K) conditions to measure these clusters' conductance with complete control of their chemical and physical environment; additionally, thermal broadening of their electronic states as well as their mobility is minimized. At low temperature, the Au11 clusters demonstrate Coulomb blockade behavior, with zero-conductance gaps resulting from quantum size effects. Surprisingly, chemically identical and even single particles produced different families of tunneling spectra, comparable to previous results for heterogeneous distributions of particles. We hypothesize that, while these particles are chemically attached to the surface of the SAM for measurement, these assemblies may still be sufficiently dynamic to affect their transport properties significantly.

Journal Article↗

ATEN: a new high temperature materials processing facility for the international space station.

Since the beginning of microgravity materials research, studies of diffusion in liquids have been performed as the typical research that efficiently uses the microgravity environment. Successful experiments in microgravity have demonstrated the ability of the Canadian Microgravity Program (QUEST I, QUELDs I and II) to make significant contributions to this field of international microgravity research. Recently, Millenium Biologix was selected to develop and build the advanced thermal environment facility (ATEN) for the International Space Station. The design of this new processing facility builds on the considerable experience gained in designing and building the QUELD II furnace and developing sealed samples for use on board a manned space platform. The system requirements for ATEN are presented, along with preliminary test data from a prototype furnace.

Journal Article↗

[Thermography of collagen diseases with Raynaud's phenomenon].

In forty-four patients with collagen diseases accompanied with Raynaud's phenomenon(systemic lupus erythematosus(SLE)10, progressive systemic sclerosis(PSS)15, primary Sjögren's syndrome(PSJS)18 and mixed connective tissue disease(MCTD)1), we analyzed the thermography of fingers after thermal stimulation with cold water(15 degrees C, 30 seconds). In normal controls, the temperature of the distal points of fingers was higher and recovered more quickly than that of the proximal points(proximal interphalangeal joint; PIP). But in the patients with Raynaud's phenomenon, the temperature of distal point of fingers was lower and recovered more slowly than that of proximal points. Because the difference of the temperature between the distal and the proximal points (DP)is a good parameter to distinguish these two thermographic patterns, we analysed DP. DP is less influenced by room temperature than the temperature of fingers and the recovery temperature after thermal stimulation which have been used as indicators of Raynaud's phenomenon. DP in the normal controls was significantly higher than that in the patients. DP in PSS was lower than that in SLE and PSJS, and statistically associated with the markers of disease activities, such as erythrocyte sedimentation rate, titers of anti-RNP antibody and diffusing capacity of lung. These results show that thermographic pattern and the value of DP are the useful indicator of severity of Raynaud's phenomenon.

Adult↗

An improved method for water vapor detection.

We describe improvements in and details for the construction, calibration and use of a device using a thermal conductivity cell for the measurement of low-level rates of water evaporation (E) from a small surface area. E is measured from 0.0 to 1.0 mg . min-1 with a correlation coefficient of 0.999 between measured and independently verified rates and amounts of water evaporation. Data are available as a recordable analog d.c. voltage as well as in digital display for E and for the amount of water evaporated during an operator defined time period. The device we describe is noninvasive and it is designed to be constructed of conventional components. It is useful not only for measuring transcutaneous water diffusion in normal and diseased skin, but also it is adequately sensitive and rapidly responding to follow thermoregulatory and psychogenic sweating in small (nom. 1.0 cm2) skin areas. It can also be used to measure accurately and precisely the rates at which water is adsorbed by and removed from inanimate materials, as well as to determine how much water they store.

Animals↗

Fast determination of the relative elemental and organic carbon content of aerosol samples by on-line single-particle aerosol time-of-flight mass spectrometry.

Different particulate matter (PM) samples were investigated by on-line single-particle aerosol time-of-flight mass spectrometry (ATOFMS). The samples consist of soot particulates made by a diffusion flame soot generator (combustion aerosol standard, CAST), industrially produced soot material (printex), soot from a diesel passenger car as well as ambient particulates (urban dust (NIST) and road tunnel dust). Five different CAST soot particle samples were generated with different elemental carbon (EC) and organic carbon (OC) content. The samples were reaerosolized and on-line analyzed by ATOFMS, as well as precipitated on quartz filters for conventional EC/OC analysis. For each sample ca. 1000 ATOFMS single-particle mass spectra were recorded and averaged. A typical averaged soot ATOFMS mass spectrum shows characteristic carbon cluster peak progressions (Cn+) as well as hydrogen-poor carbon cluster peaks (CnH(1-3)+). These peaks are originated predominately from the elemental carbon (EC) content of the particles. Often additional peaks, which are not due to carbon clusters, are observed, which either are originated from organic compounds (OC-organic carbon), or from the non-carbonaceous inorganic content of the particles. By classification of the mass spectral peaks as elemental carbon (i.e., the carbon cluster progression peaks) or as peaks originated from organic compounds (i.e., molecular and fragment ions), the relative abundance of elemental (EC) and organic carbon (OC) can be determined. The dimensionless TC/EC values, i.e., the ratio of total carbon content (TC, TC = OC + EC) to elemental carbon (EC), were derived from the ATOFMS single-particle aerosol mass spectrometry data. The EC/TC values measured by ATOFMS were compared with the TC/EC values determined by the thermal standard techniques (thermooptical and thermocoulometric method). A good agreement between the EC/TC values obtained by on-line ATOFMS and the offline standard method was found.

Aerosols↗