Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “LACTIC ACID”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88Linked to original sources
PubMed2000

Surface modification of poly(lactic acid) nanospheres using hydrophobically modified dextrans as stabilizers in an o/w emulsion/evaporation technique.

Sterically stabilized biocompatible poly(lactic acid) (PLA) nanospheres were prepared by an o/w emulsion/evaporation technique, using hydrophobically modified dextrans (DexP) as the emulsion stabilizer. Photon correlation spectroscopy, zetametry, and differential scanning calorimetry studies corroborated that interfacial adhesion between immiscible dextran and PLA chains was achieved by compatibilization of polymer segments via hydrophobic groups grafted onto dextran and thus leading to the formation of entanglements between the hydrophobic dextran parts and the PLA matrix. The presence of dextran exposed at the particle surface was confirmed by X-ray photoelectron spectroscopy and by the fact that the suspensions showed an increased stability in concentrated NaCl solutions and a reduction of bovine serum albumin adsorption compared to uncoated PLA nanoparticles. A comparison of the characteristics of PLA nanospheres DexP-coated via the emulsion procedure (NS(em)) with those of PLA particles coated by DexP adsorption (NS(ad)) suggests that the conformation of the polymer in the superficial layers may be different. However, both DexP layers behave similarly in terms of stability and protein adsorption.

Adsorption↗
PubMed1996

Degradation of poly(D,L-lactic acid) nanoparticles coated with albumin in model digestive fluids (USP XXII).

Entirely biodegradable poly(D, L-lactic acid) (PLA50) nanoparticles coated with albumin were prepared by the solvent evaporation technique. Their degradative properties were investigated in simulated gastric and intestinal fluids (USP XXII). The degradation of the albumin coating was monitored by HPLC, whereas PLA50 degradation was determined by size exclusion chromatography (SEC) as well as by the detection of lactate in bulk solution by enzymatic assay. As expected, the coating effect of albumin, a readily digestible protein, rapidly disappeared in both gastric and intestinal media, thus exposing albumin-free PLA50 cores to hydrolytic processes. In pepsin-rich simulated gastric fluid, no degradation of the PLA50 core was observed over 8 h incubation time. In contrast, in pancreatin-rich simulated intestinal fluid, the PLA50 nanoparticles were rapidly converted into lactate. The results showed that the PLA50 degradation was mainly due to an enzymatic cleavage process. Further experiments showed the involvement of lipases in the degradation of the PLA50 core in simulated intestinal fluid.

Albumins↗
PubMed2004

The use of poly-L-lactic acid in the management of soft-tissue augmentation: a five-year experience.

Poly-L-lactic acid (PLA) New-Fill* is one of the latest implants commercialized among bioresorbable fillers. This synthetic polymer is biocompatible, biodegradable, immunologically inert, and free from toxicity. All these necessary properties provide theoretical safety. New-Fill* has to be injected deeply into the dermis or into the subcutaneous tissue, so the main indications of New-Fill* are the correction of important wrinkles and furrows from face (Nasolabial folds, "Marionette" lines), and especially spread tissue augmentation for "face modeling" as for cheeks lipoatrophies in HIV patients receiving an antiprotease treatment. After two or three sessions, results are appreciable and equivalent to other resorbable fillers, but seem to last longer. On the other hand, the cost of this material is widely cheaper than others. However, we do not lose sight that the practitioner fee related to a series of two to three sessions of injections compensates for this material economy. Superficial injections should be avoided. They may increase the risk of persistent granulomas, which will be difficult to manage. Even if severe complications are rare, they must be revealed to the patient to obtain his informed consent before injecting.

Biocompatible Materials↗
PubMed2003

Lactic acid bacteria as prime candidates for codon optimization.

In species having a strong correlation of expressivity and codon bias it has been shown that heterologous expression can be optimized by changing codons of the introduced gene towards the set of codons that the host organism naturally uses in its highly expressed genes. Even though two lactic acid bacteria are fully sequenced, there are no reports on attempts of codon optimization in the literature. In this report it is demonstrated that codons used in highly expressed genes tend to differ from the codons in lowly expressed genes, and that there is a strong correlation of codon bias and empirical expressivity (codon adaptation index) in Lactococcus lactis and Lactobacillus plantarum. This strongly suggests that codon optimization strategies could be applied to expression systems with lactic acid bacteria as producer strains. A good example of a candidate for codon optimization is the mouse interleukin-2 gene, which in its natural form has an extremely low codon adaptation index for expression in Lc. lactis.

Algorithms↗
PubMed2006

Inhibition of Listeria innocua growth by antimicrobial-producing lactic acid cultures in vacuum-packed cold-smoked salmon.

The biopreservative potential of three antimicrobial-producing lactic acid bacteria strains was evaluated on cold-smoked salmon. Lactobacillus casei, Lactobacillus plantarum and Carnobacterium piscicola were added singly or in association to cold-smoked salmon, artificially contaminated with Listeria innocua and stored under vacuum for 30 days at 4 degrees C. All the lactic cultures were able to inhibit Listeria innocua growth, showing a bacteriostatic or bactericidal effect, without affecting negatively the sensory quality of the product. Lactobacillus casei was bacteriostatic when inoculated at 6 log cfu/g, but bactericidal at 8 log cfu/g, reducing Listeria innocua of 3.3 log cfu/g in comparison with the test at the end of storage. Lactobacillus plantarum and C. piscicola strains, inoculated singly at 6 log cfu/g reduced Listeria innocua counts of 2.8 and 2.7 log cfu/g, respectively, compared with the test. The association Lactobacillus casei-Lactobacillus plantarum was the most effective among the treatments with 6 log cfu/g inoculum, as Listeria innocua counts decreased of 3.2 log cfu/g compared with the test. The treatment with Lactobacillus casei-C. piscicola association was less effective than C. piscicola alone.

Animals↗
PubMedDate not supplied

Microencapsulation using poly(L-lactic acid) IV: Release properties of microcapsules containing phenobarbitone.

Microcapsules containing phenobarbitone were prepared from poly(L-lactic acid), using a water/oil emulsification and evaporation process. Polymers of three different molecular weights were used. Particle size was found to increase with an increase in core loading and polymer molecular weight. Release studies were carried out at buffer pHs of 2 and 9 at 37 degrees C. The release mechanism was found to follow a square root of time relationship. Almost 90 per cent of the phenobarbitone was released within 2 h. The release rate was not a direct relationship with the phenobarbitone content of the microcapsules because of the differing size and surface area of the microcapsules. However, normalized release rates (release rate/specific surface area) were found to increase linearly with the increase in phenobarbitone content. First order release plots of the data were not found consistent with the core loading. The release at a buffer pH of 9 was very rapid and with some microcapsules was faster than solution of the uncoated crystalline phenobarbitone. At pH 2 release was also very rapid, due to the presence of large pores in the microcapsules of high molecular weight polymers. Release from the microcapsules prepared from low molecular weight polymer was slower than those from high molecular weight polymers. Microcapsules from the low molecular weight polymer were found to swell in the dissolution medium and finally disintegrated into smaller fragments.

Capsules↗
PubMedDate not supplied

Microencapsulation using poly(L-lactic acid). I: Microcapsule properties affected by the preparative technique.

Microcapsules were prepared using a poly (L-lactic acid) (L = PLA), mol. wt. 43,200, by an emulsification and solvent evaporation technique. Phenobarbitone (PB) was used as a reference drug, (core to polymer ratio, 1:1). Both the o/w and w/o emulsion system were investigated in order to study microcapsule properties affected by the preparative technique. In the o/w system, dichloromethane (DCM) was used to dissolve L = PLA and PB and the resulting solution was dispersed in 1 per cent aqueous gelatin solution. Subsequent evaporation of the DCM resulted in the formation of microcapsules. PB was found to be poorly encapsulated within microcapsules from this o/w system. PB content in the microcapsules was found to improve using PB saturated aqueous gelatin solution as the continuum. In the w/o system, acetonitrile (AN) was used as a solvent for L-PLA and PB and light liquid paraffin (LLP), containing 2 per cent w/w Span 40, as the continuous phase. PB loading in the microcapsules was found to be very high from this w/o system. Microcapsules from the o/w system were very small compared to microcapsules obtained from the w/o system. The morphology of the microcapsules and the surface properties were found to be affected distinctly by the two techniques. Microcapsules from the o/w system showed a smooth and less porous surface, whereas a highly porous surface containing embedded PB crystals was found in the microcapsules from the w/o system.

Capsules↗
PubMed2004

[Repair of hard cleft palate with absorbable membranes made by poly-DL-lactic acid: a feasibility study].

OBJECTIVE: To investigate the feasibility and clinical results of applying poly-DL-lactic acid (PDLLA) biomembranes in cleft palate repair. METHODS: 68 cleft palate patients were divided into study group and control group. The traditional surgical method was used to control group to close the soft cleft palate, and the PDLLA biomembrane was used to study group and implanted into the surgical gap between the periosteum and bone at the hard palate, and fixed with suture. The duration, blood loss at operation, post-operative complication, wound healing and recovery were recorded and compared to conventional cleft palate repair. RESULTS: Operations were successfully completed on all 34 patients. Wound healing of soft palate and uvula was uneventful with no incidence of fistula or dehiscence. The primary healing on tissue defect of hard palate occurred in 29 patients, secondary healing occurred in 3 patients, permanent fistula between the oral cavity and the nasal cavity occurred in only one patients, and 3 patients left over fistula on alveolar process. Compared to traditional cleft palate repair, blood loss and incidence of fistula on alveolar process were decreased; the average surgical time was 89.25 minutes and was not prolonged; and there was no significant increase in post-operative complication. CONCLUSION: Hard cleft palate repair with PDLLA biomembranes is safe, simple and practical with good clinical results and is beneficial to minimize the bad influences towards the development and growth for maxilla of cleft palate patients.

Absorbable Implants↗
PubMed2006

Crystallization behaviors of poly(3-hydroxybutyrate) and poly(l-lactic acid) in their immiscible and miscible blends.

By adjusting the molecular weight of the poly(l-lactic acid) (PLLA) component in poly(3-hydroxybutyrate) (PHB)/PLLA blends, we investigated the crystallization behaviors of the two components in their immiscible and miscible 50:50 blends by real time infrared (IR) spectroscopy. In the immiscible PHB/PLLA blend, the stepwise crystallization of PHB and PLLA was realized at different crystallization temperatures. PLLA crystallizes first at a higher temperature (120 degrees C). Its crystallization mechanism from the immiscible PHB/PLLA melt is not affected by the presence of the PHB component, while its crystallization rate is substantially depressed. Subsequently, in the presence of crystallized PLLA, the isothermal melt-crystallization of PHB takes place at a lower temperature (90 degrees C). It is interesting to find that there are two growth stages for PHB. At the early stage of the growth period, the Avrami exponent is 5.0, which is unusually high, while in the late stage, it is 2.5, which is very close to the reported value (n approximately 2.5) for the neat PHB system. In contrast to the stepwise crystallization of PHB and PLLA in the immiscible blends, the almost simultaneous crystallization of PHB and PLLA in the miscible 50:50 blend was observed at the same crystallization temperature (110 degrees C). Detailed dynamic analysis by IR spectroscopy has disclosed that, even in such apparently simultaneous crystallization, the crystallization of PLLA actually occurs faster than that of PHB. It has been found that, both in the immiscible and miscible blends, the crystallization dynamics of PHB are heavily affected by the presence of crystallized PLLA.

Crystallization↗
PubMed2003

[Clinical investigation of the correlation between blood concentration of lactic acid and tissue oxygenation in severely burned patients].

OBJECTIVE: To investigate the relationship between blood concentration of lactic acid (LA) and tissue oxygenation in severely burned patients with shock. METHODS: Thirty-four severely burned patients admitted during early postburn stage were included in this study and were randomly divided into A (n = 18) and B (n = 16) groups. The patients in A group were resuscitated with modified anti-shock programme by which the patients' urine output was maintained roughly around 100ml per hour, while the patients in B group were treated by our traditional resuscitation formula by which the patients urine was kept at 40 ml per hour. The blood concentration of LA and usual indices (urine output, blood pressure, heart rate, and mental status) were simultaneously monitored before and 1, 8, 16, 24, 48 and 72 hours after resuscitation in patients of both groups. RESULTS: (1) The average blood LA level in patients of A group was (3.2 +/- 0.4) mmol/L within 24 hours of resuscitation, while the monitored indices remained within normal range. Nevertheless the LA level in B group was (7.4 +/- 1.6) mmol/L (P < 0.01, compared with that of A group), and hyperlactacidemia lasted for more than 72 hours while other indices were normal. (2) The mortality in B group was high (31.2%), whilst that in A-group was only 5.5% (P < 0.01). (3) There was negative correlation between blood LA and urine output and positive correlation between blood LA and heart rate. CONCLUSION: (1) Blood LA concentration might be taken as an immediate, sensitive, simple and useful index of tissue oxygenation of the whole body during burn shock stage. (2) It was suggested by our results that fluid resuscitation should be extended to 72 PBHs (postburn hours) with urine output over 100 ml/h, so as to ensure the quality and effects of the resuscitation of burn shock.

Adult↗
PubMed2002

Self-assembling biomaterials: liquid crystal phases of cholesteryl oligo(L-lactic acid) and their interactions with cells.

We report here on the synthesis and characterization of a series of self-assembling biomaterials with molecular features designed to interact with cells and scaffolds for tissue regeneration. The molecules of these materials contain cholesteryl moieties, which have universal affinity for cell membranes, and short chains of lactic acid, a common component of biodegradable tissue engineering matrices. The materials were synthesized in good yields with low polydispersities in the range of 1.05-1.15, and their characterization was carried out by small-angle x-ray diffraction, transmission electron microscopy, electron diffraction, differential scanning calorimetry, and atomic force microscopy. These molecular materials form layered structures that can be described as smectic phases and can also order into single-crystal stacks with an orthorhombic unit cell. Their layer spacings range from 58 to 99 A, corresponding to bilayers of oligomers with an average of 10 and 37 lactic acid residues, respectively. The self-organized layered structures were found to promote improved fibroblast adhesion and spreading, although the specific mechanism for this observed response remains unknown. The ability of self-assembling materials to present ordered and periodic bulk structures to cells could be a useful strategy in tissue engineering.

Animals↗
PubMedDate not supplied

Stereocomplexes of enantiomeric lactic acid and sebacic acid ester-anhydride triblock copolymers.

A systematic study on the synthesis, characterization, degradation, and drug release of d-, l-, and dl-poly(lactic acid) (PLA)-terminated poly(sebacic acid) (PSA) and their stereocomplexes is reported. PLA-terminated sebacic acid polymers were synthesized by melt condensation of the acetate anhydride derivatives of PLA oligomers and sebacic anhydride oligomers to yield ABA triblock copolymers of molecular weights between 3000 and 9000 that melt at temperatures between 35 and 80 degrees C. Pairs of the corresponding enantiomeric ABA copolymers composed of l-PLA-PSA-l-PLA and d-PLA-PSA-d-PLA were solvent mixed to form stereocomplexes. The formed stereocomplexes exhibited higher crystalline melting temperature than the enantiomeric polymers, which indicate stereocomplex formulation. The PLA terminals had a significant effect on the polymer degradation and drug release rate. PSA with up to 20% w/w of PLA terminals degraded and released the incorporated drug for more than 3 weeks as compared with 10 days for PSA homopolymer.

Anti-Inflammatory Agents↗
PubMed2006

Hepatic stellate cells on poly(DL-lactic acid) surfaces control the formation of 3D hepatocyte co-culture aggregates in vitro.

Evidence for the functional superiority of cells cultured as 3D aggregates or on 3D scaffolds over conventional 2D monolayer cultures has created interest in material and cell based methods that influence the formation and structure of multicellular aggregates in vitro. We have created a co-culture of primary rat hepatocytes and hepatic stellate cells on a poly(DL-lactic acid) surface, a poor substrate for rat hepatocyte adhesion, to study the dynamics of multicellular spheroid formation and the resultant cell arrangement. The poly(DL-lactic acid) surface allows dynamic and rapid interaction of hepatocytes and stellate cells to form co-culture spheroids in a complex multistage process (shown by time lapse microscopy). This spheroid morphology supports enhanced cell viability relative to a mono-culture mono-layer system (measured by lactate dehydrogenase leakage). The distribution of the aggregating cell type in the final structure is related to the mechanics of formation i.e. mainly central and peripheral. This study provides a unique and generically applicable insight into the dynamics of multicellular spheroid formation where aggregation is induced by one cell type and imposed on another. This has implications for 3D cell culture models and a wide number of currently used stromal co-culture systems.

Animals↗
PubMed1986

Manganese: its acquisition by and function in the lactic acid bacteria.

The transition metal manganese is considered to be a minor micronutrient in both pro- and eukaryotes, usually being required from the environment at subnanomolar levels. Until recently, Mn was only known to function in cells as a cofactor for a few enzymatic reactions. A notable exception has been reported in many lactic acid bacterial species which require micromolar medium Mn levels for growth and contain up to 35 mM Mn. These high Mn concentrations are accompanied by the near or complete absence of intracellular iron and superoxide dismutase (SOD). Lacking hemes, Lactobacillus plantarum and related species contain a unique Mn-cofactored catalase as well as millimolar Mn(II) in a nonenzymic complex performing the function of the micromolar superoxide dismutase found in most other aerotolerant cells. The high Mn(II) levels are accumulated via an efficient active transport system and are stored intracellularly in a high molecular weight complex. Study of Lactobacillus plantarum has provided an interesting example of the substitution of Mn for Fe in several of the biological roles of Fe, an alternative mechanism of aerotolerance, and a better understanding of the unique biochemistry of the lactic acid bacteria.

Aerobiosis↗
PubMed1995

pUCL287 plasmid from Tetragenococcus halophila (Pediococcus halophilus) ATCC 33315 represents a new theta-type replicon family of lactic acid bacteria.

A cryptic plasmid, pUCL287, was isolated from Tetragenococcus halophila (Pediococcus halophilus) ATCC 33315. It had a theta-type mechanism of replication in its natural host. Its minimal replicon, Rep287, was isolated on a 1.6-kb EcoRI fragment. The Rep287 host range included the genera Pediococcus, Enterococcus, Lactobacillus and Leuconostoc but not genus Lactococcus. Plasmids hybridizing to pUCL287 are rare among lactic acid bacteria. As assessed by hybridization, Rep287 is dissimilar to pAM beta 1, pIP501 and pUCL22, representatives of the most common theta-type replicon groups in Gram-positive bacteria. Therefore, pUCL287 appears to represent a new theta-type replicon family from lactic acid bacteria.

Base Sequence↗
PubMed2005

Effects of salicylic-lactic acid conditioner on the shear bond strength of brackets and enamel surfaces.

The purpose of this study was to evaluate the effects of salicylic-lactic (SL) acid conditioner on the shear bond strength of brackets. Fluoride releasing (Light-bond) and non-fluoride releasing (Enlight) composite adhesives were used after conditioning with 0.22% salicylic + 9% lactic acid or 34% phosphoric acid. Composite adhesives were light cured with either a halogen light curing (HLC) unit for 30-50 s or a plasma arc curing (PAC) unit for 4 s. The shear bond strength was measured with an Instron. Failure modes of debonded brackets were identified based on adhesive remnants on the bracket and tooth. Salicylic-lactic acid conditioning was found to provide adequate shear bond strength. Groups conditioned with SL acid were debonded mainly at the enamel-resin interface and comparatively clean enamel surface after debonding was observed than those conditioned with phosphoric acid. Using confocal laser scanning microscopic examinations, it was found that demineralization patterns between SL acid and phosphoric acid conditioned groups were not different when the same adhesive was used. The SL acid conditioner did not reduce the demineralization. Light-bond adhesive showed less demineralization than Enlight adhesive. The PAC unit can be recommended as an alterative to the HLC unit because it significantly reduces the irradiation time.

Acid Etching, Dental↗
PubMed2003

The use of poly(ethylene glycol)-block-poly(lactic acid) derived copolymers for the rapid creation of biomimetic surfaces.

For many tissue engineering applications biomimetic or bioactive polymers would allow for a more precise control of cell behavior in growing tissues than has so far been possible. For this application recently developed amine reactive diblock copolymers (N-succinimidyl tartrate monoamine poly(ethylene glycol)-block-poly(D,L-lactic acid) [ST-NH-PEGxPLAy]) were investigated concerning their reactivity in binding model substances. Their ability to covalently immobilize proteins on their surfaces was examined using polymer films with amine reactive surfaces. Furthermore, thiol reactive polymers were obtained by attaching N-succinimidyl 3-maleinimido propionate, a thiol reactive linker to monoamine poly(ethylene glycol)-block-poly(D,L-lactic acid) [H2N-PEGxPLAy]. This allowed the immobilization of proteins carrying free thiol groups. The amine and thiol reactive polymers were characterized by 1H-NMR spectroscopy and gel permeation chromatography (GPC). Investigation of glass transitions temperatures using modulated differential scanning calorimetry proved suitability for the fabrication of polymeric scaffolds for tissue engineering applications. The functionality of the polymers was demonstrated by investigating their ability to bind model amines, like the fluorescent dye EDANS. Moreover, insulin and somatostatin were covalently attached to the active linker groups via amine and thiol groups. The polymers will permit covalently attaching different bioactive molecules, such as growth and differentiation factors, with fast and gentle procedures securing their biological activity.

Amino Acid Sequence↗