Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Electron Probe Microanalysis”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88Linked to original sources
PubMed1980

Performance analysis of total hip prostheses: some particular metallurgical observations.

Metallurgical observations of phenomena which influence the clinically successful performance of permanent implants and implant materials are reported. The effect of casting voids in cast cobalt chromium femoral stems of total hip replacements is discussed first. Pitting corrosion occurred in a retrieved stainless-steel implant type AISI 316 containing 2.7% Mo. The fractographic pattern of this device retrieved for fatigue failure shows typical characteristics of corrosion-enhanced fatigue.

Chromium Alloys↗
PubMed1984

Casting properties of Ni-Ti shape memory alloy.

A Ni-45 wt% Ti (Ni-50 at % Ti) alloy was cast into molds of magnesia and silica investments by use of a dental argon-arc pressure casting machine with a copper crucible . The castings exhibited shape memory properties. The shape recovery process was sharper in the specimens cast in magnesia investment molds than in those cast in silica (phosphate-bonded) investment molds. The latter casting had a hard region of the periphery, suggesting that shape recovery process may be affected by reaction of molten metal with silica. Furthermore, the alloy possessed the adequate mechanical properties for consideration as crown-and-bridge prostheses.

Chemical Phenomena↗
PubMed1986

In vitro calcification and in vivo biocompatibility of the cross-linked polypentapeptide of elastin.

The in vitro calcifiability and molecular weight dependence of calcification of the polypentapeptide, (L X Val1-L X Pro2-Gly3-L X Val4-Gly5)n, which had been gamma-irradiation cross-linked have been determined when exposed to dialyzates of normal, nonaugmented fetal bovine serum. The material was found to calcify: calcifiability was found to be highly molecular weight dependent and to be most favored when the highest molecular weight polymers (n approximately equal to 240) had been used for cross-linking. The in vivo biocompatibility, biodegradability, and calcifiability of the gamma-irradiation cross-linked polypentapeptide were examined in rabbits in both soft and hard tissue sites. The material was found to be biocompatible irrespective of its physical form and to be biodegradable but with n of 200 or less it was not shown to calcify or ossify in the rabbit tibial nonunion model.

Animals↗
PubMed1991

Protein adsorption to poly(ethylene oxide) surfaces.

Surfaces containing poly(ethylene oxide) (PEO) are interesting biomaterials because they exhibit low degrees of protein adsorption and cell adhesion. In this study different molecular weight PEO molecules were covalently attached to poly(ethylene terephthalate) (PET) films using cyanuric chloride chemistry. Prior to the PEO immobilization, amino groups were introduced onto the PET films by exposing them to an allylamine plasma glow discharge. The amino groups on the PET film were next activated with cyanuric chloride and then reacted with bis-amino PEO. The samples were characterized by scanning electron microscopy, water contact angle measurements, gravimetric analysis, and electron spectroscopy for chemical analysis (ESCA). The adsorption of 125I-labeled baboon fibrinogen and bovine serum albumin was studied from buffer solutions. Gravimetric analysis indicated that the films grafted with the low-molecular-weight PEO contained many more PEO molecules than the surfaces grafted with higher-molecular-weight PEO. The high-molecular-weight PEO surfaces, however, exhibited greater wettability (lower water contact angles) and less protein adsorption than the low-molecular-weight PEO surfaces. Adsorption of albumin and fibrinogen to the PEO surfaces decreased with increasing PEO molecular weight up to 3500. A further increase in molecular weight resulted in only slight decreases in protein adsorption. Protein adsorption studies as a function of buffer ionic strength suggest that there may be an ionic interaction between the protein and the allylamine surface. The trends in protein adsorption together with the water contact angle results and the gravimetric analysis suggest that a kind of "cooperative" water structuring around the larger PEO molecules may create an "excluded volume" of the hydrated polymer coils. This may be an important factor contributing to the observed low protein adsorption behavior.

Adsorption↗
PubMed1995

Characterization of nodules induced by bioactive glass on cultured periodontal-ligament fibroblasts.

We previously reported that materials leached from bioactive glass (BG) and vitamin D3 induced the formation of nodules on cultured periodontal-ligament fibroblasts (PLF). In this study, we have investigated the relationship between the conditions of the materials and nodule formation, analyzed morphologically, and also studied whether the production of nodules was specific to cultured PLF. PLF and skin fibroblasts were cultured in the presence or absence of BG. The amounts of calcium, phosphate, sodium and silicon in the culture medium and the number of nodules were measured at the 55th day. The nodules were observed microscopically and analyzed using an X-ray microanalyzer. In PLF, nodules were formed regardless of the presence or absence of BG; however, they were more numerous in the presence of BG. In skin fibroblasts, nodules were not observed. The amounts of calcium and silicon were higher in the presence of BG, while the amount of phosphate was lower. The nodules appeared crystalline with a spongy structure and contained calcium and phosphorus. Our results show that the nodules were associated with PLF and precipitated by the materials (higher concentrations of calcium and silicon), and they were spongy crystal composed of calcium and phosphorus.

Biocompatible Materials↗
PubMed1990

Transmission electron microscopic x-ray quantitative analysis of human dentin at 200 kV accelerating voltage.

Qualitative and quantitative x-ray energy dispersive spectroscopy is now used successfully to analyze many features and processes in inorganic samples. When applied to inorganic samples, however, the results are often less satisfactory due to problems of preparation of organic samples, difficulty of measuring x-rays from organic samples, damage of the sample by the electron beam, and other practical problems. In the present study we used a high voltage transmission electron microscope equipped with an energy dispersive x-ray spectrometer to examine accurate quantitative standardless analysis of thin sections of an organic sample, human dentin. Based on our experiments we found the important parameters for quantitative analysis were sample thickness and appropriate choice of model sample. Further, we show that the method of Cliff and Lorimer can be used with biological samples at 200 kV, and we show that quantitative analysis of human dentin can be carried out at 200 kV. Finally, we show that areas of human dentin can be differentiated by their morphological characteristics and x-ray analyses obtained in the transmission electron microscope.

Child↗
PubMed1993

Imaging fluid/solid interactions in hydrocarbon reservoir rocks.

The environmental scanning electron microscope (ESEM) has been used to image liquid hydrocarbons in sandstones and oil shales. Additionally, the fluid sensitivity of selected clay minerals in hydrocarbon reservoirs was assessed via three case studies: HCl acid sensitivity of authigenic chlorite in sandstone reservoirs, freshwater sensitivity of authigenic illite/smectite in sandstone reservoirs, and bleach sensitivity of a volcanic reservoir containing abundant secondary chlorite/corrensite. The results showed the suitability of using ESEM for imaging liquid hydrocarbon films in hydrocarbon reservoirs and the importance of simulating in situ fluid-rock interactions for hydrocarbon production programmes. In each case, results of the ESEM studies greatly enhanced prediction of reservoir/borehole reactions and, in some cases, contradicted conventional wisdom regarding the outcome of potential engineering solutions.

Aluminum Silicates↗
PubMed1997

Theoretical explanation of the relationship between backscattered electron and x-ray linear attenuation coefficients in calcified tissues.

X-ray absorption and backscattered electron (BSE) microscopies are two commonly used techniques for estimating mineral contents in calcified tissues. The resolution in BSE images is usually higher than in x-ray images, but due to the previous lack of good standards to quantify the grey levels in BSE images of bones and teeth, x-ray microtomography (XMT) images of the same specimens have been used for calibration. However, the physics of these two techniques is different: for a specimen with a given composition, the x-ray linear attenuation coefficient is proportional to density, but there is no such relation with the BSE coefficient. To understand the reason that this calibration appears to be valid, the behaviour of simulated bone samples was investigated. In this, the bone samples were modelled as having three phases: hydroxyapatite (Ca10(PO4)6(OH)2), protein, and void (either empty or completely filled with polymethylmethacrylate (PMMA), a resin which is usually used for embedding bones and teeth in microscopic studies). The x-ray linear attenuation coefficients (calculated using published data) and the BSE coefficients (calculated using Monte Carlo simulation) were compared for samples of various phase proportions. It was found that the BSE coefficient correlated only with the x-ray attenuation coefficient for samples with PMMA infiltration. This was attributed to the properties of PMMA (density and mean atomic number) being very similar to those of the protein; therefore, the sample behaves like a two-phase system which allows the establishment of a monotonic relation between density and BSE coefficient. With the newly developed standards (brominated and iodinated dimethacrylate esters) for BSE microscopy of bone, grey levels can be converted to absolute BSE coefficients by linear interpolation, from which equivalent densities can be determined.

Bone Density↗
PubMed1996

Biopersistence of man-made vitreous fibers and crocidolite asbestos in the rat lung following inhalation.

This study investigated possible relationships between fiber bio-persistence in the lung and previously observed differences in pulmonary toxicity between asbestos and man-made vitreous fibers (MMVF) following inhalation exposure. Fischer 344/N rats were exposed nose only, 6 hr/day for 5 days to 30 mg/m3 MMVF (two fiberglass compositions, rock wool, or slag wool) or to 10 mg/m3 crocidolite asbestos. At eight time points up to 1 year postexposure, lung fiber burdens were analyzed for number/lung and bivariate dimensions using scanning electron microscopy (SEM) and for chemical composition using SEM energy dispersive spectroscopy. After 365 days, > 95% of long (> 20 microns) MMVFs had disappeared from the lung compared to only 17% of long crocidolite fibers. Longer MMVFs disappeared more rapidly than short MMVFs, suggesting that long fibers were dissolving or breaking. Mean diameters and lengths of the MMVFs decreased with time, while the mean diameter of crocidolite remained unchanged and its mean length showed an apparent increase, probably related to macrophage-mediated clearance of short fibers. Leaching of oxides occurred in the fibrous glasses and slag wool and correlated with morphological changes in the fibers over time. No chemical or morphological changes were observed in crocidolite fibers. These changes in MMVF number, chemistry, and morphology over time in lung tissue compared to crocidolite asbestos demonstrate the relatively low biological persistence of some MMVFs in the lung and may explain why these MMVFs are not tumorigenic in rats, even after chronic exposure at high concentrations.

Administration, Inhalation↗
PubMed1995

Conjunctival tissue examination in severe eye burns: a study with scanning electron microscopy and energy-dispersive X-ray analysis.

BACKGROUND: Long-lasting inflammation is a major problem in treatment after severe eye burns and may find expression in an altered elemental composition of the conjunctiva. Particulate contamination of biological tissue induces such inflammatory processes. In the anterior eye segment, trauma or subsequent therapy may give rise to such contamination. Scanning electron microscopy and energy-dispersive X-ray analysis are able to detect traumatic residues of submicron size and changes of the elemental composition. METHODS: Conjunctival specimens from first-time peridectomy of three healthy and nine severely burnt-eyes were examined with scanning electron microscopy and energy-dispersive X-ray analysis. The samples were prepared as cryo- or paraffin sections, mounted on carbon blocks and coated with evaporated elemental carbon. RESULTS: The samples of healthy conjunctiva showed higher concentrations of Na, P and CI. These elements showed lower concentrations in conjunctival stroma of burnt eyes excised before the 20th day after trauma than in material obtained subsequently. In two burnt conjunctival specimens there was severe traumatic contamination with Ca in Ca(OH)2 and CaO burns, and in one case the traumatic substance was Si, in a peroxide plus silicone spray burn. In the remaining six cases, particulate contamination with Fe, Al, Ni, Zn, Cu, Ti and other substances was present in the burnt conjunctivas, while no contamination was detected in the specimens of healthy conjunctivas. CONCLUSIONS: The origin of the contaminant particles is assumed to be the trauma itself and the subsequent therapy. These investigations stress the importance, for clinical purposes, or early peridectomy and contamination-free therapy.

Burns, Chemical↗
PubMed1996

Electrolytes in the cornea: a therapeutic challenge.

BACKGROUND: Reported here are the results of electrolyte measurements in different layers of 70 apparently normal human corneas. METHODS: Samples were examined by energy-dispersive X-ray analysis under calibrated conditions in a scanning electron microscope. The method allows the simultaneous quantitative analysis of, among others, sodium (Na), chloride (Cl), phosphorus (P) and potassium (K). The results are related to the dry weight of the analyzed samples. Four distinct layers, subepithelium, middle stroma, posterior stroma and Descemet's membrane, were analysed in each cornea. RESULTS: In the middle stroma we found concentrations of: sodium 0.609 +/- 0.13, chloride 0.557 +/- 0.115, potassium 0.058 +/- 0.02 and phosphorus 0.038 +/- 0.01 (mol/kg dry weight) [corrected]. CONCLUSION: The collation of normal electrolyte concentrations provides reference values for future studies on changes of the corneal electrolyte composition in diseased or injured eyes. The electrolyte composition of rinsing fluids or eye drops should be adjusted to that of the corneal stroma. Phosphate buffer, for example, is not a good vehicle for topical eye treatments and should be replaced by organic buffering systems.

Adult↗
PubMed1980

Enameloid in the teleost fish Lophius. An ultrastructural study.

The ultrastructural and chemical differences between mature enameloid and dentine in the teleost fish Lophius were demonstrated using transmission (TEM) and scanning (SEM) electron microscopy, X-ray diffraction analysis, electron diffraction analysis and electron microprobe analysis. An enameloid cap (about 50 micron thick) and a thin layer (1 micron thick) of collar enameloid were revealed in the scanning (SEM) and transmission (TEM) electron microscopes. Collar enameloid, structurally different from dentine both in SEM and TEM, proved to be less mineralized than the cap as revealed by electron microprobe analysis. The enameloid cap was seen to differ from dentine by (i) its electron density in TEM; (ii) the structural arrangement perpendicular to the underlying dentine, observed in SEM and TEM and corroborated by electron diffraction data, which showed a preferred orientation of enameloid crystallites; (iii) its higher F content decreasing gradually from the apex of the tooth to the junction with dentine and falling suddenly below this junction; and (iv) its lower Mg content. Establishment of a classification of enameloids is proposed, similar to that for dentines, in which selachian enameloid would be a reference standard.

Animals↗
PubMed1982

Aortic endothelium of alloxan diabetic rabbits: a quantitative study using scanning electron microscopy.

Scanning electron microscope studies of the aorta and other major arteries have been performed in alloxan-induced diabetic rabbits. After 5 weeks, a variety of structural abnormalities of the endothelial lining were detected including a significant increase in the number of argyrophilic cells and an increased number of craters or openings in the endothelial junctional region. Evidence of more extensive micro-damage was present after 5 months duration of diabetes. These zones with structural changes in the endothelial lining of major vessels seem to be areas of high predilection to atherosclerosis in diabetes.

Animals↗