Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polystyrenes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86Linked to original sources
PubMed2001

An improved selection procedure for the screening of phage display peptide libraries.

Peptide sequences that bind to a wide range of ligands such as monoclonal antibodies, receptors and carbohydrates have been successfully identified after screening phage display peptide libraries. However, these procedures tend to select mainly medium to low affinity-binding clones. A modified screening procedure has been developed in order to improve the efficiency of this process such that high avidity/affinity binding clones are preferentially selected. Three different solid phase binding surfaces were evaluated for the attachment of antibody during the screening procedure and a stepwise decrease in the pH of the elution buffer introduced during the final round of biopanning. The monoclonal antibody MA 18/7 was used to screen a 15-mer peptide library. This antibody is well-characterised and its binding site has been mapped to residues 28-37 of the pre-S1 protein of the hepatitis B virus. The antibody was either biotinylated and attached to polystyrene plates via a streptavidin-biotin 'bridge', or bound directly to 1/4 in. polystyrene beads, or to 11 microm latex beads. A significant enrichment of binding clones was observed when the monoclonal antibody was attached directly to polystyrene or latex beads as compared to the biotinylated antibody. All mimotopes identified after biopanning with the antibody attached to the polystyrene beads possessed a central core motif, identical or similar to the sequence DPAF contained within the epitope binding site of MA 18/7 on the native pre-S molecule. However, this motif was only observed in 30% of clones isolated after biopanning using the 11 microm latex beads and in 2% of clones isolated after biopanning on the streptavidin-coated plates. Immunoblotting with the monoclonal antibody MA 18/7 confirmed binding to clones containing the DPAF sequence or a similar motif. A stepwise reduction in the pH of the elution buffer in the final round of biopanning resulted in the removal of clones that possessed low affinity binding motifs, thereby increasing the percentage of clones containing high affinity binding motifs in the final elution step at pH 2.0. Thus, the combined use of polystyrene beads and a stepwise decrease in the pH of the elution buffer in the final round of biopanning resulted in the elimination of non-binding clones and an increase in the efficiency in isolating high affinity binding clones.

Amino Acid Sequence↗
PubMed1997

Properties of solid supports.

Many supports including composite materials and functionalized surfaces are available for solid-phase synthesis. In the process of selecting the proper support it is important to consider the optimal performance during solid-phase synthesis. For most purposes the mechanically stable beaded gel resins are preferred. These resins are homogeneous, and the loading and physical and chemical properties can easily be varied. Optimal properties have been obtained by radical polymerization of end group acryloylated long-chain polyethylene glycols. However, polystyrene resins or amide bond free PEG-based resins may be more suited for general organic synthesis where reactivity of radicals, carbenes, carbanions, carbenium ions, or strong Lewis acids have to be considered. Loading of the resins can have a dramatic effect on the outcome of a synthesis and has to be considered separately for each synthesis. Synthesis of long peptides with 50-100 amino acids imposes completely different requirements on the performance, swelling, and loading than a large-scale synthesis of, for example, the pentapeptide enkephalin. Automated multiple synthesizers constructed for columns of beaded gel or composite supports are available from many suppliers. It is therefore expected that the optimization of support properties will continue in order to meet new synthetic challenges. In the synthesis for solid-phase screening of binding of biomolecules to ligands directly on the resin beads, it is an advantage if the resin is not permeable to the biomolecule so unbound molecules can easily be removed by washing. This is the case with polystyrene-based resins, but they do, however, often show nonspecific adhesion of proteins owing to the hydrophobic character of the polystyrene. Modification of the functional groups of polystyrene with polyethylene glycol as spacers for synthesis of the binding ligands can increase the available ligand concentration on the bead surface and eliminate most of the nonspecific adhesion. In contrast to binding studies, solid-phase assays of enzymes require beads that are permeable to the enzyme, as the progress of reaction can be followed and the product of reaction analyzed. The available amount on the surface of the polystyrene-based beads (approximately 0.3%) is not enough for product analysis. Therefore, in the case of enzyme assays, highly swelling permeable PEG-based gel resins or functionalized surfaces of a polar and porous matrix are preferred.

Chemistry↗
PubMed2003

Chondrocyte interactions with porous titanium alloy and calcium polyphosphate substrates.

Chondrocytes maintain their phenotype and form cartilagenous tissue when cultured on calcium polyphosphate (CPP) or titanium alloy (Ti alloy), porous three-dimensional materials. To understand how these materials may influence chondrocyte phenotype and matrix synthesis, the early interactions of cultured cells with CPP and titanium alloy were examined. These were compared to chondrocytes grown in monolayer culture on tissue culture polystyrene, conditions in which cultured chondrocytes dedifferentiate and do not form cartilagenous tissue. Scanning electron microscopy of cells up to 72 h in culture showed that bovine chondrocytes on CPP, Ti alloy, and polystyrene were an admixture of round and spread cells. The spread cells on CPP and titanium alloy were not entirely flattened but maintained a polygonal shape. In contrast, spread chondrocytes in monolayer culture were flatter and significantly larger, a difference that was maintained even in the absence of serum. All cells cultured on CPP and Ti alloy exhibited subcortical ring-like distribution of actin filaments whereas the flattened cells on polystyrene showed actin filaments distributed throughout the cytoplasm. Cells on CPP and Ti alloy synthesized significantly less collagen and proteoglycans than cells cultured on polystyrene at 72 h of culture. In summary the cells on the porous three-dimensional materials differed from those on polystyrene in terms of cell morphology and size, actin cytoskeleton organization, and synthesis of selected matrix macromolecules. The data suggests that CPP and titanium alloy may mediate their effect by limiting cell spreading in part by favoring the maintenance of a ring-like actin distribution.

Actin Cytoskeleton↗
PubMed1998

Influence of extracellular matrix proteins on membrane potentials and excitability in NG108-15 cells.

Previous studies have demonstrated that components of the extracellular matrix can induce neurite extension and cell adhesion in the neuroblastoma x glioma hybrid cell line, NG108-15. Using standard intracellular recording techniques, we examined the resting membrane potential (RMP) and membrane excitability of NG108-15 cells differentiated under serum-free media with representative extracellular matrix (ECM) protein components as the substrate. Surfaces coated with collagen IV and a laminin-1 synthetic peptide induced a significantly (P < 0.05) more hyperpolarized RMP than control polystyrene surfaces. For example, after > or =8 days in culture NG108-15 cells plated on polystyrene exhibited a RMP of -33.2+/-0.8 mV (mean+/-SEM, n=158 cells) whereas cells cultured on the laminin-1 peptide C16 and collagen IV showed a RMP of -37.6+/-0.7 mV (n=157) and -37.5+/-1.5 mV (n=68), respectively. Furthermore, the proportions of cells on ECM substrates showing membrane excitability, i.e. evoked action potentials (APs) and the capability for regular firing, were significantly greater compared to those cells cultured on polystyrene. Among excitable cells cultured on the different substrates, characteristics of the action potentials, such as AP duration, amplitude, and the maximum rate of rise, dV/dtMAX, were examined in detail. While little or no differences were observed between polystyrene and the laminin-1 peptide groups, significant differences in the AP parameters were apparent for collagen IV. For example, dV/dtMAX for polystyrene and the laminin-1 peptide C16 were only 71.7+/-24.5 V/s (n=11) and 59.0+/-8.9 V/s (n=9), respectively, whereas cells cultured on collagen IV surfaces exhibited a dV/dtMAX reaching 156.1+/-22.0 V/s (n=7). These data support a role for ECM components in the maintenance of the RMP and membrane excitability in NG108-15 cells.

Action Potentials↗
PubMedDate not supplied

Physical properties of poly(ethylene glycol) (PEG)-based resins for combinatorial solid phase organic chemistry: a comparison of PEG-cross-linked and PEG-grafted resins.

Three series of poly(ethylene glycol) (PEG)-based polymers were synthesized and characterized with respect to their physical properties. Polyoxyethylene-polyoxypropylene (POEPOP), polyoxyethylene-polyoxetane (SPOCC), and polyoxyethylene-polystyrene (POEPS-3) were synthesized respectively by anion polymerization, cation polymerization, and radical polymerization. Both bulk and suspension modes were used to synthesize the polymers from derivatized PEG monomers (PEG 400, PEG 900, and PEG 1500). The three supports were compared with two commercially available PEG-grafted supports (TentaGel S OH, ArgoGel-OH) and two polystyrene supports (aminomethylated polystyrene [PS-NH2] and macroporous aminomethylated polystyrene [PLAMS]) with respect to their swelling properties, loading, NMR spectral quality, as well as solvent and reagent accessibility. Loadings of 0.3-0.7 mmol/g were obtained for the PEG-based resins. Swelling of the PEG-based resins was determined to be higher than that of the PEG-grafted resins and polystyrene supports. The PEG-based resins gave better resolved high-resolution NMR spectra than the PEG-grafted resins when examined by magic angle spinning nanoprobe (MAS) NMR spectroscopy. Moreover, fluorescence quenching of polymer bound 2-amino-benzoate by protonation with p-toluenesulfonic acid showed moderate to fast diffusion through the polymer depending on the solvent and the polymer matrix.

Chemistry, Organic↗
PubMed2005

Relaxation processes in semidilute solutions of polymers in liquid crystal solvents.

We investigate the relaxation phenomena in a polymer (polystyrene)/liquid crystal (4-cyano-4'-n-octyl-biphenyl) system, in its homogeneous isotropic phase near the isotropic-isotropic, isotropic-nematic, and isotropic-smectic coexistence curve, using both polarized and depolarized photon correlation spectroscopy (PCS). We study this system for different polystyrene molecular weights (4750, 12 500, and 65 000 g/mol), different compositions (50, 40, 30, and 10% polystyrene (PS) by weight), and different temperatures close to phase boundaries. First of all, we determine the phase diagrams of this system for the different molecular weights. The shape of the phase diagrams strongly depends on the molecular weight. However, in all cases, at low temperatures, these systems separate into an almost pure liquid crystalline (LC) phase and polystyrene-rich phase. PCS measurements show that the relaxation processes in the homogeneous phase are not affected by the proximity of the nematic, or smectic, boundaries (even at a temperature of 0.1 degrees C above the phase separation in two phases). In polarized PCS experiments, we always see three relaxation processes well separated in time: one, very fast, with a relaxation time of the order of 10(-5) s; a second one with a relaxation time within the range 10(-2)-10(-3) s; and a last one, very slow, with a relaxation time of the order of 1 s. Both the fast and slow modes are independent of the wave vector magnitude, while the intermediate relaxation process is diffusive. In depolarized PCS experiments, the intermediate mode disappears and only the fast and slow relaxation processes remain, and they are independent of the magnitude of the wave vector. The diffusive mode is the classical diffusive mode, which is associated with the diffusion of polymer chains in all polymer solutions. The fast mode is due to the rotational diffusion of 4-cyano-4'-n-octyl-biphenyl (8CB) molecules close to polystyrene chains (transient network). Finally, we assign the slowest mode to reorientational processes of small aggregates of PS chains that are not dissolved in 8CB.

Journal Article↗
PubMed1992

Adhesion to porcine squamous epithelium of saccharide and protein moieties of Lactobacillus fermentum strain 104-S.

The mechanism by which Lactobacillus fermentum strain 104-S adheres to porcine squamous epithelium was investigated by studying the adsorption to epithelial cells, and control surfaces, of radioactively labelled material released from the bacterial cells by water extraction. The released material was fractionated by gel filtration and the adsorption of pronase-sensitive and -resistant material in the various fractions to porcine gastric tissue and the control surfaces of polystyrene and immobilized bovine serum albumin (BSA) was determined. The fraction with affinity for the epithelium was characterized by enzymic degradation, periodate oxidation, lipid extraction, and protein and carbohydrate analyses. The adsorption pattern of radioactively labelled crude released material mimicked the adhesion of whole labelled cells to polystyrene and to gastric squamous tissue pieces. On fractionation, the pattern of adsorption to polystyrene and BSA was different from that obtained for the tissue pieces. Considerably less labelled pronase-stable material bound to surfaces of polystyrene and BSA, as compared with the tissue, suggesting that the pronase-resistant component has a tissue-specific affinity. After pronase treatment of the fraction of M(r) about 20,000 (20 K) containing labelled components with affinity for the epithelium, only saccharides were detected. Radioactivity was lost after hydrolysis with HCl, and therefore this pronase-resistant labelled component must be a saccharide. It is concluded that protein moieties in the extract have an affinity for several surfaces, including polystyrene, and that saccharide moieties have a specific affinity for the gastric squamous epithelium.

Animals↗
PubMed1998

Immune complex transfer enzyme immunoassay for antibody IgG to HIV-1 gp41 antigen using synthetic peptides as antigens.

The immune complex transfer enzyme immunoassay for antibody IgG to HIV-1 gp41 antigen was developed using two synthetic peptides. An aliquot (10 microl) of serum samples from HIV-1 seropositive subjects was incubated simultaneously with 2,4-dinitrophenyl-bovine serum albumin-synthetic HIV-1 gp41 peptide conjugates and synthetic HIV-1 gp41 peptide-beta-D-galactosidase conjugates and subsequently with colored polystyrene beads coated with affinity-purified (anti-2,4-dinitrophenyl group) IgG to trap the immune complexes formed comprising the three components. After washing, the colored polystyrene beads were incubated with white polystyrene beads coated with affinity-purified (anti-human IgGgamma-chain) IgG in the presence of epsilonN-2,4-dinitrophenyl-L-lysine to transfer the immune complexes to the white polystyrene beads. Beta-D-Galactosidase activity bound to the white polystyrene beads was assayed by fluorometry. The formation, trapping and transferring of the immune complexes were completed within 0.5, 0.5 and 1.5 hr, respectively. Since each peptide appeared to react with its own specific antibody IgG, serum samples were tested by the equimolar combination of the two peptides. The lowest signals (fluorescence intensities for bound beta-D-galactosidase activity) for serum samples from HIV-1 asymptomatic carriers, patients with AIDS-related complex and patients with AIDS were 1490-, 2210- and 1460-fold, respectively, higher than the highest signal for serum samples from HIV-1 seronegative subjects. In five seroconversion serum panels, antibody IgG to HIV-1 gp41 antigen was detected as early as antibodies to HIV-1 detected by three currently commercially available methods.

Acquired Immunodeficiency Syndrome↗
PubMed1996

Preparation and characterization of high-surface-area polymer substrates for microcalorimetry.

The preparation and characterization of high-surface-area polymeric substrates suitable for the microcalorimetry of protein adsorption are described. High-surface-area polystyrene, poly(styrene-co-butyl methacrylate) and poly(styrene-co-allyl alcohol) were prepared by adsorbing polymer from solution onto fumed silica. Verification of adsorption of polystyrene by silica was determined by noting peak shifts of the surface silanol group in the infrared. The amount of polymer adsorbed was determined from adsorption isotherms. The minimum thickness of polystyrene required to mask silicon oxide properties was found to be that thickness at which contact angles became constant, about 35 A. Polymer densities were measured. Water contact angles on each polymer surface indicate that poly(styrene-co-allyl alcohol) has the surface most wettable by water. Polymer-water interfacial energies were estimated from pendant drop results and a harmonic mean equation along with contact angles. Two methods were used to estimate the polar and dispersion components of the three polymers. Both methods predicted polystyrene to have the highest interfacial energy against water, and one method predicted poly(styrene-co-allyl alcohol) to have the lowest. A Wilhelmy plate study verified the change in interfacial properties as a function of contact time with water. A study of the heats of adsorption of lysozyme by each substrate using a modified Tien-Calvet microcalorimeter demonstrated the suitability of the substrates for microcalorimetry.

Adsorption↗
PubMed2001

Experimental determination of depth-scaling factors and central axis depth dose for clinical electron beams.

Depth-scaling factors rho(eff) for clear polystyrene and polymethylmethacrylate (PMMA) phantoms have been determined experimentally as a function of nominal electron-beam energy in the range 6 to 22 MeV. Values of rho(eff) have been calculated from the ratio rho(eff) = R(wat)(50) / R(med)(50), where R(wat)(50) and R(med)(50) are the measured depths of 50% ionization in electron solid water and plastic (clear polystyrene and PMMA) phantoms, respectively. Measurements were made using an Attix chamber in an electron solid water phantom, a Holt chamber in a clear polystyrene phantom, and a Markus chamber in a PMMA phantom. The average value of measured rho(poly)(eff) was found to be 0.999 +/- 0.009. This is higher than the value of 0.975 recommended by Task Group 25 (TG-25) of the American Association of Physicists in Medicine (AAPM) by 2.5%. Depending on energy, the maximum differences between the AAPM TG-25-recommended and the measured values lie in the range 1% to 3.5%. Similarly, the average value of measured rho(PMMA)(eff) was found to be 1.168 +/- 0.023. This is higher than the AAPM TG-25-recommended value of 1.115, by 5%. Depending on energy, the maximum differences between the AAPM TG-25-recommended and the measured values lie in the range 3% to 8%. Central axis depth dose curves in water were generated for 6, 15, and 20 MeV electron beams from measured depth-ionization data in PMMA and clear polystyrene phantoms following the recommendations of the AAPM TG-25 report and using both TG-25-recommended and experimentally determined values of depth-scaling factors rho(eff). For both phantoms, either the TG-25-recommended value or the experimentally determined values of rho(eff) yielded agreement to within about 2 mm among all depth doses in water at the depths of clinical relevance.

Electrons↗
PubMed1988

Substratum-dependent proliferation and survival of bone marrow-derived mononuclear phagocytes.

Adherence to the culture substratum exerted a significant influence on the growth and survival of murine bone marrow cells incubated under conditions that favored the development of mononuclear phagocytes. Bone marrow cells cultured two weeks in unprocessed polystyrene dishes, refractory to cell attachment, reached a maximum or near maximum cell density by day 11. This density was stable throughout the duration of the incubation period. Characterization of the cells on day 11 revealed an essentially pure population of mononuclear phagocytes composed of round, nonadherent cells, and slightly elongated, loosely attached cells. Bone marrow cells incubated in polystyrene tissue culture dishes processed to promote cell attachment also reached a maximum cell density by day 11. However, this maximum density was only half that attained by cells incubated in unprocessed polystyrene dishes. Furthermore, continued incubation resulted in a sharp decline in cell viability and number. The cells in tissue culture dishes on day 11 represented a pure mononuclear phagocyte population composed principally of cells adherent to the surface of the dish. The subsequent analysis of cells subcultured in processed and unprocessed polystyrene dishes indicated that adherence to the substratum modulated the growth factor requirements of bone marrow-derived mononuclear phagocytes. Specifically, mononuclear phagocytes in tissue culture dishes expressed an elevated requirement for colony stimulating factor-1 in order to proliferate and survive in long-term culture.

Animals↗
PubMed1994

Direct covalent attachment of small peptide antigens to enzyme-linked immunosorbent assay plates using radiation and carbodiimide activation.

Direct adsorption of small peptide antigens to unaltered, commercially available polystyrene surfaces may be too weak to permit suitable assay by ELISA. We therefore developed a simple method for the covalent attachment of small, potentially single epitope antigens to polystyrene surfaces. Chemical activation of polystyrene plates with carbodiimide considerably improves the total and covalent attachment of radioactive octapeptides. The covalent attachment was demonstrated by washing with hot detergent. A 3.5 Mrad gamma-irradiation of plates also increases total binding, particularly in combination with chemical activation. The covalent attachment presumably occurs through formation and chemical activation of carboxylate functions on the polystyrene surface which form amide bonds with peptides. ELISA test was performed with CGRP and successive smaller CGRP fragments. Covalent attachment of C-terminal peptide fragments as detection antigens allows optimal recognition and sensitivity even for hexapeptides, while decapeptide antigens were already poorly recognized using a conventional antigen plating technique. Repetitive detergent washes and/or prolonged storage of plates with covalently bound antigens did not reduce their ELISA sensitivity. The method with storage and reutilization capacities that we present here will be useful for the development of preplated antibody screening test.

Antigens↗
PubMed1991

Immobilization of binding proteins on nonporous supports. Comparison of protein loading, activity, and stability.

Four different nonporous particulate materials, nylon, polystyrene, soda-lime silicate glass, and fused silica glass, have been evaluated for their appropriateness as immobilization supports for immunoglobulins. A method of protein quantitation that is usually applied to solutions, the bicinchoninic acid (BCA) assay, was used successfully to directly measure ng amounts of protein immobilized on the supports. Two proteins, a monoclonal antibody to theophylline and the biotin binding protein avidin, were studied. Radioactive theophylline and radioactive biotin were used to measure the activity of the immobilized protein. Ligand binding capacity per mm2 of support was measured as a function of amount of protein immobilized. By measuring both the amount of protein immobilized and its ligand binding capacity, we have determined that antitheophylline antibody adsorbed on polystyrene balls loses almost 90% of its binding activity after 65 h, although little protein is lost from the balls over this time. Avidin retains nearly full activity for biotin on polystyrene. The binding activity of biotinyl-antibody conjugate immobilized on avidin-adsorbed polystyrene is stable, even when stored for over 22 wk. Antibody covalently immobilized on soda-lime silicate glass beads retains its binding activity over long-term storage, although only 0.1 mol of 3H-theophylline bind per mol of immobilized antibody. Using fused silica glass particles as the solid support, the same antibody binds approx 0.6 mol of ligand per mol of immobilized antibody protein. The structural "softness" of the immunoglobulin requires that interaction with the surface be prevented in order to maintain activity.

Adsorption↗
PubMed1998

Bioassay for hamster macrophage chemotaxis: application to study particle-lung interactions.

Attraction of lung macrophages to particle deposition sites has been demonstrated in different animal species. We reported a threefold increase of the number of macrophages to occur within 40 min after polystyrene particle deposition in hamster airways [Geiser et al. (1994) Am. J. Respir. Cell Mol. Biol. 160: 594-603]. Complement-derived chemotactic activity is one of the mechanisms postulated for macrophage recruitment. It was the aim of this study to test whether complement-derived chemotactic activity is involved in the rapid recruitment of macrophages to the site of deposited polystyrene particles in hamster airways. We first developed an in vitro cell migration assay for hamster macrophages to assess complement-derived chemotaxis. Second, the bronchoalveolar lavage fluids (BALF) of four hamsters that had inhaled aerosols of polystyrene microspheres were tested for chemotactic activity by this bioassay and compared with BALF of four sham-exposed hamsters. Chemotactic response of macrophages was found toward complement-activated hamster serum, whereas macrophage migration was not increased toward BALF of particle and sham-exposed hamsters. In contrast, macrophage migration to BALF of both groups was reduced by 1.6-fold. Thus, the stimulus for macrophage recruitment to the site of deposited polystyrene particles in hamster airways could not be demonstrated using this bioassay.

Animals↗
PubMed1989

Novel and sensitive noncompetitive enzyme immunoassay for peptides.

A novel and sensitive noncompetitive enzyme immunoassay for peptides is described. Peptides were biotinylated using sulfosuccinimidyl-6-(biotinamido)hexanoate and were trapped onto anti-peptide IgG-coated polystyrene balls. After washing the polystyrene balls to eliminate other biotinylated substances, the biotinylated peptides were eluted with HC1 and were reacted with anti-peptide Fab'-peroxidase conjugate. The complex formed was trapped onto streptavidin-coated polystyrene balls. Peroxidase activity bound to the polystyrene balls was assayed by fluorimetry. The detection limit of angiotensin I as a model peptide was 13 fg (10 amol)/tube and 0.8 ng/l of plasma, which was 80 to 480-fold lower than those previously reported by competitive radioimmunoassay and competitive enzyme immunoassay. And other peptides could also be measured more sensitively by the present noncompetitive enzyme immunoassay method than by competitive immunoassays.

Angiotensin I↗
PubMed1993

Coating particles with a block co-polymer (poloxamine-908) suppresses opsonization but permits the activity of dysopsonins in the serum.

The surfaces of polystyrene microspheres (60 nm in diameter) and colloidal gold particles (17 nm in diameter) were coated with a polyoxyethylene (POE)/polyoxypropylene (POP) block co-polymer; poloxamine-908. The polymer adsorb strongly to the microspheres via its relatively hydrophobic POP segments. This leaves the POE chains in a mobile state as they extend outward from the surface and thereby provide stability to the particle suspension by suppressing aggregation. The blood clearance and biodistribution of uncoated vs. poloxamine-908-coated 125I-labelled polystyrene microspheres were compared 1 h after intravenous administration into rats. Poloxamine coating dramatically reduced liver accumulation of microspheres and kept them within the systemic circulation. These observations were further confirmed by electron microscopy, demonstrating that Kupffer cells were loaded with uncoated latex but had ingested few if any of the poloxamine-908-coated particles. The interaction of uncoated and poloxamine-coated gold particles with freshly isolated rat liver sinusoidal cells was examined by electron microscopy. The accumulation in Kupffer cells of gold particles after opsonization with autologous plasma was in accordance with previous observations where the dominant opsonizing activity had been identified as fibronectin. In contrast, coating of gold particles with poloxamine-908 prior to plasma opsonization prevented the adsorption of fibronectin onto their surface. Simultaneously, Kupffer cells failed to recognize poloxamine-908-coated gold particles before and after opsonization. Unlike Kupffer cells, liver endothelial cells endocytosed poloxamine-908-coated gold particles prior to opsonization but failed to recognize them after the opsonization process. This was taken as an indication of the presence of dysopsonic activity in plasma. This dysopsonic activity was studied using polystyrene latex microspheres, where the uptake of such particles by phagocytes is known to be independent of opsonization. The coating of 125I-labelled polystyrene microspheres with poloxamine-908 dramatically reduced their interaction with liver sinusoidal cells. This interaction was further reduced in the presence of either autologous plasma or serum. A heat-stable (60 degrees C for 15 min) serum component of molecular mass > 100 kDa was found to mediate this suppressive effect. Thus, we demonstrate that organ-specific receptors, opsonin activities and plasma dysopsonins regulate the in vivo clearance of particulate materials from the circulation. Poloxamine-908 coating modulates particle clearance by effectively blocking opsonization but still allowing for dysopsonization.

Animals↗
PubMed2005

The influence of electrostatic forces on protein adsorption.

In this paper we investigate the importance of electrostatic double layer forces on the adsorption of human serum albumin by UV-ozone modified polystyrene. Electrostatic forces were measured between oxidized polystyrene surfaces and gold-coated atomic force microscope (AFM) probes in phosphate buffered saline (PBS) solutions. The variation in surface potential with surface oxygen concentration was measured. The observed force characteristics were found to agree with the theory of electrical double layer interaction under the assumption of constant potential. Chemically patterned polystyrene surfaces with adjacent 5 microm x 5 microm polar and non-polar domains have been studied by AFM before and after human serum albumin adsorption. A topographically flat surface is observed before protein adsorption indicating that the patterning process does not physically modify the surface. Friction force imaging clearly reveals the oxidation pattern with the polar domains being characterised by a higher relative friction compared to the non-polar, untreated domains. Far-field force imaging was performed on the patterned surface using the interleave AFM mode to produce two-dimensional plots of the distribution of electrostatic double-layer forces formed when the patterned polystyrene surfaces is immersed in PBS. Imaging of protein layers adsorbed onto the chemically patterned surfaces indicates that the electrostatic double-layer force was a significant driving force in the interaction of protein with the surface.

Adsorption↗
PubMed2006

Drug adsorption to plastic containers and retention of drugs in cultured cells under in vitro conditions.

Loss of drug content during cell culture transport experiment can lead to misinterpretations in permeability analysis. This study analyses drug adsorption to various plastic containers and drug retention in cultured cells under in vitro conditions. The loss of various drugs to polystyrene tubes and well plates was compared to polypropylene and glass tubes both in deionised water and buffer solution. In cellular uptake experiments, administered drugs were obtained from cultured cells by liquid extraction. Samples were collected at various time points and drug concentrations were measured by a new HPLC-MS/MS method. Acidic drugs (hydrochlorothiazide, naproxen, probenicid, and indomethacin) showed little if any sorption to all tested materials in either water or buffer. In the case of basic drugs, substantial loss to polystyrene tubes and well plates was observed. After 4.5 h, the relative amount remaining in aqueous test solution stored in polystyrene tubes was 64.7 +/- 6.8%, 38.4 +/- 9.1%, 31.9 +/- 6.7%, and 23.5 +/- 6.1% for metoprolol, medetomidine, propranolol, and midazolam, respectively. Interestingly, there was no significant loss of drugs dissolved in buffer to any of the tested materials indicating that buffer reduced surficial interaction. The effect of drug concentration to sorption was also tested. Results indicated that the higher the concentration in the test solution the lower the proportional drug loss, suggesting that the polystyrene contained a limited amount of binding sites. Cellular uptake studies showed considerable retention of drugs in cultured cells. The amounts of absorbed drugs in cellular structures were 0.45%, 4.88%, 13.15%, 43.80%, 23.57% and 11.22% for atenolol, metoprolol, medetomidine, propranolol, midazolam, and diazepam, respectively. Overall, these findings will benefit development and validation of further in vitro drug permeation experiments.

Adsorption↗