Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ChIP”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources
PubMed2002

Towards disposable lab-on-a-chip: poly(methylmethacrylate) microchip electrophoresis device with electrochemical detection.

A fully disposable microanalytical device based on combination of poly(methylmethacrylate) (PMMA) capillary electrophoresis microchips and thick-film electrochemical detector strips is described. Variables influencing the separation efficiency and amperometric response, including separation voltage or detection potential are assessed and optimized. The versatility, simplicity and low-cost advantages of the new design are coupled to an attractive analytical performance, with good precision (relative standard deviation RSD = 1.68% for n = 10). Applicability for assays of mixtures of hydrazine, phenolic compounds, and catecholamines is demonstrated. Such coupling of low-cost PMMA-based microchips with thick-film electrochemical detectors holds great promise for mass production of single-use micrototal analytical systems.

Catecholamines↗
PubMed2002

A dynamically modified microfluidic poly(dimethylsiloxane) chip with electrochemical detection for biological analysis.

Separation and direct detection of amino acids, glucose and peptide in a 3.1 cm separation channel made of poly(dimethylsiloxane) (PDMS) with end-column amperometric detection at a copper microdisk electrode was developed. This system is the integration of a normal sized working electrode with electrochemical detection on a PDMS microfabricated device. The PDMS channels dynamically modified by 2-morpholinoethanesulfonic acid (MES) show less adsorption and more enhanced efficiency than that of unmodified ones when applied to separations of these biological molecules. The migration time is less than 100 s and the reproducibility of migration time is satisfactory with relative standard deviation (RSD) of 2.8% in 19 successive injections. The limits of detection of arginine (Arg), glucose, and methionine-glycine (Met-Gly) are estimated to be 2.0, 8.5, and 64.0 microM at S/N = 3, approximately 0.5-16.0 fmol, respectively. Variances influencing the separation efficiency and amperometric response, including injection, separation voltage, detection potential, or concentration of buffer and additive, are assessed and optimized.

Alkanesulfonic Acids↗
PubMed2003

CHIP: Defining a dimension of the vulnerability to attention deficit hyperactivity disorder (ADHD) using sibling and individual data of children in a community-based sample.

We are taking a quantitative trait approach to the molecular genetic study of attention deficit hyperactivity disorder (ADHD) using a truncated case-control association design. An epidemiological sample of children aged 5 to 15 years was evaluated for symptoms of ADHD using a parent rating scale. Individuals scoring high or low on this scale were selected for further investigation with additional questionnaires and DNA analysis. Data in studies like this are typically complicated. In the study reported on here, individuals have from 1 to 4 questionnaires completed on them and the sample is composed of a mixture of singletons and siblings. In this paper, we describe how we used a genetic hierarchical model to fit our data, together with a twin dataset, in order to estimate genetic factor loadings. Correlation matrices were estimated for our data using a maximum likelihood approach to account for missing data. We describe how we used these results to create a composite score, the heritability of which was estimated to be acceptably high using the twin dataset. This score measures a quantitative dimension onto which molecular genetic data will be mapped.

Adolescent↗
PubMed2004

How consistent are expression chip platforms?

DNA arrays are now widely used in academia and industry, and expression profiling is recognised as a major tool for basic research as well as for drug development. It is also likely, in the near future, that DNA arrays will be used in clinical laboratories for diagnostic and prognostic purposes. Since several types of arrays are being used, the coherence of results obtained using these diverse platforms becomes an important issue: to what extent can data obtained in different laboratories and with different equipment be combined? Several recent papers address this issue and demonstrate that the expected agreement is not necessarily found. Consistent results can be obtained, but this requires careful identification of the genes assessed by the arrays, and scrupulous adherence to strict experimental procedures.

DNA, Complementary↗
PubMed2003

Electrochemical optical waveguide lightmode spectroscopy (EC-OWLS): a pilot study using evanescent-field optical sensing under voltage control to monitor polycationic polymer adsorption onto indium tin oxide (ITO)-coated waveguide chips.

A new technique has been developed that combines evanescent-field optical sensing with electrochemical control of surface adsorption processes. This new technique, termed "electrochemical optical waveguide lightmode spectroscopy" (EC-OWLS), proved efficient in monitoring molecular surface adsorption and layer thickness changes of an adsorbed polymer layer examined in situ as a function of potential applied to a waveguide in a pilot study. For optical sensing, a layer of indium tin oxide (ITO) served as both a high-refractive-index waveguide and a conductive electrode. In addition, an electrochemical flow-through fluid cell was provided, which incorporated working, reference, and counter electrodes, and was compatible with the constraints of optical sensing. Poly(L-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG) served as a model, polycation adsorbate. Adsorption of PLL-g-PEG from aqueous buffer solution increased from 125 to 475 ng/cm(2 )along a sigmoidal path as a function of increasing potential between 0 and 1.5 V versus the Ag reference electrode. Upon buffer rinse, adsorption was partially reversible when a potential of >/=0.93 V was maintained on the ITO waveguide. However, reducing the applied potential back to 0 V before rinsing resulted in irreversible polymer adsorption. PLL-g-PEG modified with biotin demonstrated similar adsorption characteristics, but subsequent streptavidin binding was independent of biotin concentration. Applying positive potentials resulted in increased adsorbed mass, presumably due to polymer chain extension and reorganization in the molecular adlayer.

Adsorption↗
PubMed2005

Electrochemical probe for on-chip type flow immunoassay: immunoglobulin G labeled with ferrocenecarboaldehyde.

Labeling of ferrocenecarboaldehyde (Fc-CHO) to immunoglobulin G (IgG) via formation of Schiff-base and its reduction was investigated for construction of an electrochemical probe for miniaturized amperometric flow immunoassay. Approximately eight molecules of Fc-CHO were labeled to IgG and the reversible redox property of ferrocene was observed. Labeling efficiency improved by over three times as compared to the conventional method using ferrocenemonocarboxylic acid (Fc-COOH). Also, binding affinity of IgG labeled with Fc-CHO to its antigen, IgE, was investigated by enzyme-linked immunosorbent assay (ELISA) and surface plasmon resonance assay. IgG labeled with Fc-CHO that retained eight ferrocene moiety showed sufficient binding affinity to its antigen and the current response obtained in the flow electrochemical detection system increased by 14-fold as compared with IgG labeled with Fc-COOH when applying the potential of 390 mV vs. Ag/AgCl. The minimum detectable concentration of IgG labeled with Fc-CHO was 0.06 microM. IgG labeled with Fc-CHO demonstrate biochemical and electrochemical properties that are useful for electrochemical immunosensors.

Animals↗
PubMed2006

Identification of organ-specific T cell populations by analysis of multiparameter flow cytometry data using DNA-chip analysis software.

BACKGROUND: The analysis of cells from multiple experimental groups by multiparameter flow cytometry leads to the generation of complex data sets, for which adequate analysis tools are not commonly available. We report here that software designed for transcriptomics applications can be used in multiparameter flow cytometry. METHODS: Lymphocytes isolated from nine different mouse organs were stained and subjected to 10-parameter flow cytometry. The resulting data set contained 594 different T cell subsets per organ per mouse and was organized into a so-called flow cytometry array (FCA). RESULTS: Computation of a hierarchical tree revealed that lymph nodes and spleen were populated by similar T cell subsets, while T cells from peripheral organs displayed a diverse subset composition. Furthermore, organ-specific T cell subsets were identified. CONCLUSIONS: This new FCA concept in flow cytomics proved to be a valuable tool for the fast and unbiased analysis of complex multiparameter flow cytometry data sets. It can be used for assessing disease progression and therapeutic intervention, and for the association of disease-related biomarkers on the protein level.

Animals↗
PubMed2003

Monolithic valves for microfluidic chips based on thermoresponsive polymer gels.

The direct preparation of thermoresponsive monolithic copolymers by photopatterning of a liquid phase consisting of an aqueous solution of N-isopropylacrylamide, N-ethylacrylamide, N,N'-methylenebisacrylamide, and 4,4'-azobis(4-cyanovaleric acid) has been studied and the products used as valves within the channels of microfluidic devices. The volume change associated with the polymer phase transition at its lower critical solution temperature (LCST) leads to the rapid swelling and the deswelling of the 2.5% cross-linked monolithic gel thus enabling the polymer to close or open the channel and to function as a nonmechanically actuated valve. The LCST at which the valve switches was easily adjusted within a range of 35 degrees C-74 degrees C by varying the proportions of the monovinyl monomers in the polymerization mixture. The closed valve holds pressures of up to 18 MPa without noticeable dislocation, structural damage, or leakage. In contrast, following deswelling by raising the temperature above LCST the valve offers no appreciable flow resistance since its large, micrometer-size pores are open. Laser-triggered photobleaching of a fluorescent dye contained in the liquid phase enabled monitoring of flow through the device and determination of the times required to open and close the valve. The valves are characterized by very fast actuation times in a range of 1-4 s depending on the type of device. No changes in performance were observed even after repeated open-close cycling of the valves.

Acrylamides↗
PubMed2004

Multichannel homogeneous immunoassay for detection of 2,4,6-trinitrotoluene (TNT) using a microfabricated capillary array electrophoresis chip.

A high-throughput homogeneous immunoassay for the sensitive detection of 2,4,6-trinitrotoluene (TNT) has been developed using radial capillary array electrophoresis microdevices. Samples consisting of equilibrium mixtures of anti-TNT antibody (Ab), fluorescein-labeled TNT, and various concentrations of unlabeled TNT were electrokinetically injected into 48 channels of a radial capillary array electrophoresis microchannel plate. The rapid electrophoretic separation allows us to analyze the equilibrium ratio formed by the competition between the labeled and the unlabeled TNT for Ab binding. The simultaneous parallel TNT separations facilitate determination of a calibration curve for the TNT assay, which has high sensitivity (LOD, 1 ng/mL) and a wide dynamic range (1-300 ng/mL).

Antibodies↗
PubMed2004

Dispersion control in microfluidic chips by localized zeta potential variation using the field effect.

A new technique to minimize the effects of turn-induced dispersion within U-shaped separation channels by using the field effect within a capacitor to vary the zeta potential along the channel walls in the vicinity of the microchannel is described. The effects of the separation channel geometry, the fluid velocity profile, and the use of the field effect to control the zeta potential on the band distribution in the detection area are extensively discussed. The results for a U-shaped separation channel indicate that varying the zeta potential by controlling the field effect significantly reduces the band dispersion induced by the 90 degrees turns within the channel. Finally, it is shown that the application of the proposed localized zeta potential variation method also results in a correction of the band tilting phenomenon and a reduction in the racetrack effect.

Electromagnetic Fields↗