Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Azides”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources

Effect of pH and ligand binding on the structure of the Cu site of the Met121Glu mutant of azurin from Pseudomonas aeruginosa.

A pH-dependent X-ray absorption fine structure (XAFS) study has been undertaken to provide a structural interpretation of the spectroscopic properties of the Met121 Glu mutant of azurin from Pseudomonas aeruginosa (Azp). Ligand binding studies have been carried out to investigate the effect of the cavity formed at the Cu site as a result of the mutation. The optical spectrum at pH 4 exhibits an intense band at approximately 600 nm and a weaker band at approximately 450 nm, typical for the blue copper proteins. As the pH is increased, these bands decrease in intensity and shift to 570 and 413 nm, respectively, with the latter becoming the more intense of the two [Karlsson, B.G., et al. (1991) Protein Eng. 4 (3), 343-349]. These changes are accompanied by a change in the EPR spectrum from a rhombic type 1 Cu spectrum at pH 4 to a spectrum with the rhombic splitting decreasing to zero and the hyperfine coupling increasing from 25 to 83 G. X-ray absorption a the Cu K-edge shows that this change results from the lengthening of the Cu-His (by 0.07 A) and Cu-Cys (by 0.06 A) bonds and the coordination of one of the oxygen atoms of the glutamate ligand at pH 8, at a distance as close as 1.90 A. The copper site thus changes from a normal type 1 copper center with three strong bonds at pH 4 to a copper site with four strong bonds at pH 8, with Cu-His distances significantly longer than known distances for type 1 copper centres measured using the XAFS technique. The XAFS of the azide derivative measured at pH 8 shows a similar Cu coordination, with azide replacing glutamate as the fourth ligand. Azide binding at pH 8 is accompanied by a further increase in the EPR hyperfine coupling to 110 G. This structural information when taken together with recent structural sudies on copper proteins points toward the need for a reexamination of the basis on which copper proteins are classified.

Absorptiometry, Photon↗

A structure-based mechanism for copper-zinc superoxide dismutase.

A reaction cycle is proposed for the mechanism of copper-zinc superoxide dismutase (CuZnSOD) that involves inner sphere electron transfer from superoxide to Cu(II) in one portion of the cycle and outer sphere electron transfer from Cu(I) to superoxide in the other portion of the cycle. This mechanism is based on three yeast CuZnSOD structures determined by X-ray crystallography together with many other observations. The new structures reported here are (1) wild type under 15 atm of oxygen pressure, (2) wild type in the presence of azide, and (3) the His48Cys mutant. Final R-values for the three structures are respectively 20.0%, 17.3%, and 20.9%. Comparison of these three new structures to the wild-type yeast Cu(I)ZnSOD model, which has a broken imidazolate bridge, reveals the following: (i) The protein backbones (the "SOD rack") remain essentially unchanged. (ii) A pressure of 15 atm of oxygen causes a displacement of the copper ion 0.37 A from its Cu(I) position in the trigonal plane formed by His46, His48, and His120. The displacement is perpendicular to this plane and toward the NE2 atom of His63 and is accompanied by elongated copper electron density in the direction of the displacement suggestive of two copper positions in the crystal. The copper geometry remains three coordinate, but the His48-Cu bond distance increases by 0.18 A. (iii) Azide binding also causes a displacement of the copper toward His63 such that it moves 1.28 A from the wild-type Cu(I) position, but unlike the effect of 15 atm of oxygen, there is no two-state character. The geometry becomes five-coordinate square pyramidal, and the His63 imidazolate bridge re-forms. The His48-Cu distance increases by 0.70 A, suggesting that His48 becomes an axial ligand. (iv) The His63 imidazole ring tilts upon 15 atm of oxygen treatment and azide binding. Its NE2 atom moves toward the trigonal plane by 0.28 and 0.66 A, respectively, in these structures. (v) The replacement of His48 by Cys, which does not bind copper, results in a five-coordinate square pyramidal, bridge-intact copper geometry with a novel chloride ligand. Combining results from these and other CuZnSOD crystal structures, we offer the outlines of a structure-based cyclic mechanism.

Amino Acid Substitution↗

Solid-phase synthesis of 1,2,3-triazoles via 1,3-dipolar cycloaddition.

The solid-phase synthesis of 1,2,3-triazoles via 1,3-dipolar cycloaddition of polymer-bound azides to various alkynes is reported. Polymer-bound azides were synthesized from polymer-bound halides and sodium azide and reacted with alkynes to produce polymer-bound 1,2,3-triazoles. Cleavage of the triazoles was performed with trifluoroacetic acid. A traceless synthesis of 1,2,3-triazoles was developed using 2-methoxy-substituted resin (polymer-bound 4-hydroxy-2-methoxybenzyl alcohol). In addition, a synthesis of 4-hydroxybenzyl-substituted 1,2,3-triazoles from the bromo-Wang resin (4-(bromomethyl)phenoxymethyl polystyrene) was achieved.

Technology, Pharmaceutical↗

Combining Biginelli multicomponent and click chemistry: generation of 6-(1,2,3-triazol-1-yl)-dihydropyrimidone libraries.

Efficient solution-phase protocols for the high-throughput synthesis of 6-(1,2,3-triazol-1-yl)-dihydropyrimidones are reported. The multistep sequence involves the initial bromination of dihydropyrimidones precursors (DHPMs, Biginelli compounds) at the C6-methyl position, using a recyclable polymer-supported brominating agent under rapid flow-through conditions (residence time of 1 min). The 6-bromomethyldihydropyrimidone intermediates were subsequently subjected to a microwave-assisted azidation step (25 min), providing the key 6-azidomethyldihydropyrimidone precursors. In the final step of the sequence, the azides were treated with terminal acetylenes under Cu(I) catalysis (azide-acetylene ligation, "click chemistry") to provide the target 6-(1,2,3-triazol-1-yl)-dihydropyrimidones in a regiospecific fashion (1,4-triazoles) in moderate overall yield utilizing controlled microwave irradiation (20 min). In total, a library of 27 compounds was prepared with 4 points of diversity.

Journal Article↗

Mononuclear (nitrido)iron(V) and (oxo)iron(IV) complexes via photolysis of [(cyclam-acetato)FeIII(N3)]+ and ozonolysis of [(cyclam-acetato)FeIII(O3SCF3)]+ in water/acetone mixtures.

Reaction of the monoanionic, pentacoordinate ligand lithium 1,4,8,11-tetraazacyclotetradecane-1-acetate, Li(cyclam-acetate), with FeCl3 yields, upon addition of KPF6, [(cyclam-acetato)FeCl]PF6 (1) as a red microcrystalline solid. Addition of excess NaN3 prior to addition of KPF6 yields the azide derivative [(cyclam-acetato)FeN3]PF6 (2a) as orange microcrystals. The X-ray crystal structure of the azide derivative has been determined as the tetraphenylborate salt (2b). Reaction of 1 with silver triflate yields [(cyclam-acetato)Fe(O3SCF3)]PF6 (3), which partially dissociates triflate in nondried solvents to yield a mixture of triflate and aqua bound species. Each of the iron(III) derivatives is low-spin (d5, S = 1/2) as determined by variable-temperature magnetic susceptibility measurements, Mössbauer and EPR spectroscopy. The low-spin iron(II) (d6, S = 0) complexes 1red and 2ared have been prepared by electrochemical and chemical methods and have been characterized by Mössbauer spectroscopy. Photolysis of 2a at 419 nm in frozen acetonitrile yields a nearly colorless species in approximately 80% conversion with an isomer shift delta = -0.04 mm/s and a quadrupole splitting delta EQ = -1.67 mm/s. A spin-Hamiltonian analysis of the magnetic Mössbauer spectra is consistent with an FeV ion (d3, S = 3/2). The proposed [(cyclam-acetato)FeV=N]+ results from the photooxidation of 2a via heterolytic N-N cleavage of coordinated azide. Photolysis of 2a in acetonitrile solution at -35 degrees C (300 nm) or 20 degrees C (Hg immersion lamp) results primarily in photoreduction via homolytic Fe-Nazide cleavage yielding FeII (d,6 S = 0) with an isomer shift delta = 0.56 mm/s and quadrupole splitting delta EQ = 0.54 mm/s. A minor product containing high-valent iron is suggested by Mössbauer spectroscopy and is proposed to originate from [((cyclam-acetato)Fe)2(mu-N)]2+ with a mixed-valent (FeIV(mu-N)FeIII))4+S = 1/2 core. Exposure of 3 to a stream of oxygen/ozone at low temperatures (-80 degrees C) in acetone/water results in a single oxidized product with an isomer shift delta = 0.01 mm/s and quadrupole splitting delta EQ = 1.37 mm/s. A spin-Hamiltonian analysis of the magnetic Mössbauer yields parameters similar to those of compound II of horseradish peroxidase which are consistent with an FeIV=O monomeric complex (S = 1).

Journal Article↗

Azido derivatives of low-valent group 14 elements: synthesis, characterization, and electronic structure of [(n-Pr)2ATI]GeN3 and [(n-Pr)2ATI]SnN3 featuring heterobicyclic 10-pi-electron ring systems.

Treatment of THF solutions of [(n-Pr)2ATI]MCl (where [(n-Pr)2ATI]- = N-(n-propyl)-2-(n-propylamino)troponiminate; M = Ge and Sn) with sodium azide affords the compounds [(n-Pr)2ATI]MN3 in excellent yield. X-ray analyses revealed that these Ge(II) and Sn(II) compounds feature linear azide moieties and planar heterobicyclic C7N2M ring systems. Germanium and tin atoms adopt a pyramidal geometry. IR spectra of [(n-Pr)2ATI]GeN3 and [(n-Pr)2ATI]SnN3 display a nu asym(N3) band at 2048 and 2039 cm-1, respectively. DFT calculations on the corresponding methyl-substituted species demonstrate that the geometrical and electronic structure of these two species are very similar, and the dominant canonical form of the metal-azide moiety is M-N-N identical to N. The tin system is, as expected, slightly more ionic. A comparative CASSCF/DFT study on the model system H-Sn-N3 illustrates that the DFT approach is viable for the calculation of the structures of these species.

Journal Article↗

Synthesis and characterization of the SO(2)N(3)(-), (SO(2))(2)N(3)(-), and SO(3)N(3)(-) anions.

SO(2) solutions of azide anions are bright yellow, and their Raman spectra indicate the presence of covalently bound azide. Removal of the solvent at -64 degrees C from CsN(3) or N(CH(3))(4)N(3) solutions produces yellow (SO(2))(2)N(3)(-) salts. Above -64 degrees C, these salts lose 1 mol of SO(2), resulting in white SO(2)N(3)(-) salts that are marginally stable at room temperature and thermally decompose to the corresponding azides and SO(2). These anions were characterized by vibrational and (14)N NMR spectroscopy and theoretical calculations. Slow loss of the solvent by diffusion through the walls of a sealed Teflon tube containing a sample of CsSO(2)N(3) in SO(2) resulted in white and yellowish single crystals that were identified by X-ray diffraction as CsSO(2)N(3).CsSO(3)N(3) with a = 9.542(2) A, b = 6.2189(14) A, c = 10.342(2) A, and beta = 114.958(4) degrees in the monoclinic space group P2(1)/m, Z = 2, and Cs(2)S(2)O(5).Cs(2)S(2)O(7).SO(2), respectively. Pure CsSO(3)N(3) was also prepared and characterized by vibrational spectroscopy. The S-N bond in SO(2)N(3)(-) is much weaker than that in SO(3)N(3)(-), resulting in decreased thermal stability, an increase in the S-N bond distance by 0.23 A, and an increased tendency to undergo rotational disorder. This marked difference is due to SO(3) being a much stronger Lewis acid (pF(-) value of 7.83) than SO(2) (pF(-) value of 3.99), thus forming a stronger S-N bond with the Lewis base N(3)(-). The geometry of the free gaseous SO(2)N(3)(-) anion was calculated at the RHF, MP2, B3LYP, and CCSD(T) levels. The results show that only the correlated methods correctly reproduce the experimentally observed orientation of the SO(2) group.

Journal Article↗

Mixed guanidinato/alkylimido/azido tungsten(VI) complexes: synthesis and structural characterization.

A series of structurally characterized new examples of pentacoordinated heteroleptic tungsten(VI)-guanidinates complexes are described. Starting out from [WCl(2)(Nt-Bu)(2)py(2)] (1) (py = pyridine) and the guanidinato transfer reagents (TMEDA)Li[(Ni-Pr)(2)CNi-Pr(2)] (2a) (TMEDA = N,N,N',N'-tetramethylethylendiamine) and [Li(NC(NMe(2))(2))](x) (2b), the title compounds [WCl(Nt-Bu)(2)[(Ni-Pr)(2)CNi-Pr(2)]] (3) and [W(Nt-Bu)(2)Cl{NC(NMe(2))(2)]](2) (6) were selectively formed by the elimination of one mole equivalent of lithium chloride. The isopropyl-substituted guanidinato ligand [(Ni-Pr)(2)CNi-Pr(2)} of monomeric 3 is N(1),N(3)-bonded to the tungsten center. The introduction of the sterically less-demanding tetramethyl guanidinato ligand [NC(NMe(2))(2)] expectedly leads to dimeric 6 exhibiting a planar W(2)N(2) ring with the guanidinato group bridging the two tungsten centers via the deprotonated imino N-atom. The remaining chloro ligand of 3 is labile and can be substituted by sterically less-crowded groups such as dimethylamido or azido that yield the presumably monomeric compounds 4 and 5, respectively. A similar treatment of 6 with sodium azide yields the dimeric azido derivative 7. Reacting [WCl(2)(Nt-Bu)(2)py(2)] directly with an excess of sodium azide leads to the dimeric bis-azide species [[W(Nt-Bu)(2)(N(3))(mu(2)-N(3))py](2)]. The new compounds were fully characterized by single-crystal X-ray diffractometry (except 2, 4, and 5), NMR, IR, and mass-spectroscopy as well as elemental analysis. Compound 5, [W(N(3))(Nt-Bu)(2)[(Ni-Pr)(2)CNi-Pr(2)]], can be sublimed at 80 degrees C, 1 Pa.

Journal Article↗

Synthesis, Structure, and Magnetic Properties of Mn(salpn)N(3,) a Helical Polymer, and Fe(salpn)N(3), a Ferromagnetically Coupled Dimer (salpnH(2) = N,N'-bis(Salicylidene)-1,3-diaminopropane).

The preparation, crystal structures, and variable temperature magnetic susceptibility data are presented for two azido-bridged Schiff base complexes of Mn(III) and Fe(III). Mn(salpn)N(3) (1), where salpn is the dianion of N,N'-bis(salicylidene)-1,3-diaminopropane, crystallizes in the orthorhombic system, space group Pna2(1), with a = 11.947(2) Å, b = 11.818(2) Å, c = 11.227(5) Å, and Z = 4. Fe(salpn)N(3) (2) crystallizes in the monoclinic system, space group P2(1)/c, with a = 10.199(7) Å, b = 14.081(6) Å, c = 12.017(3) Å, beta = 105.19(3) degrees, and Z = 4. In 1, salpn coordinates in the equatorial mode, with two azide ions coordinating in axial positions. The azide ions act as "end-to-end" (&mgr;-(1,3)) bridges, leading to an infinite helical chain propagating along the crystallographic c axis. In striking contrast, 2 has a dimeric structure in which the Schiff base adopts a cis-octahedral coordination mode. The dimer is held together by two "head-on" (&mgr;-(1,1)) bridging azide ions. The polymeric compound, 1, is weakly antiferromagnetic (J = -4.03 cm(-)(1), H(ex) = -2J summation operatorS(i)()S(i)()(+1)), while 2 is weakly ferromagnetic (J = 0.76 cm(-)(1), H(ex) = -2JS(1)S(2)).

Journal Article↗

Chemoselective covalent coupling of oligonucleotide probes to self-assembled monolayers.

A chemoselective route to routinely and rapidly attach oligonucleotide probes to well-defined surfaces is presented. Cu(I) tris(benzyltriazolylmethyl)amine-catalyzed coupling of terminal acetylenes to azides on a self-assembled monolayer is used instead of traditional nucleophilic-electrophilic coupling reactions. The reaction proceeds well even in the presence of purposely introduced nucleophilic and electrophilic impurities. The density of oligonucleotide probes can be controlled by controlling the amount of azide functionality. Although most of our work was done on gold surfaces, this technique should be readily applicable to any surface on which an azide-containing monolayer can be assembled as we have preliminarily demonstrated by derivatizing azidotrimethoxysilane-modified glass slides with fluorescein-containing oligonucleotides.

Amines↗

Solution phase isomerization of vibrationally excited singlet nitrenes to vibrationally excited 1,2-didehydroazepine.

Photolysis of phenyl and o-biphenylyl azide (at 270 nm) releases vibrationally excited singlet nitrene which isomerizes to the corresponding hot 1,2-didehydroazepine at a rate competitive with thermal relaxation. Using ultrafast vibrational spectroscopy we observe the formation of vibrationally excited 1,2-4,6-azacycloheptatetraene (1,2-didehydroazepine) in picoseconds following photolysis of phenyl azide in chloroform and o-biphenylyl azide in acetonitrile at ambient temperature.

Journal Article↗

Rapid discovery and structure-activity profiling of novel inhibitors of human immunodeficiency virus type 1 protease enabled by the copper(I)-catalyzed synthesis of 1,2,3-triazoles and their further functionalization.

Building from the results of a computational screen of a range of triazole-containing compounds for binding efficiency to human immunodeficiency virus type 1 protease (HIV-1-Pr), a novel series of potent inhibitors has been developed. The copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC), which provides ready access to 1,4-disubstituted-1,2,3-triazoles, was used to unite a focused library of azide-containing fragments with a diverse array of functionalized alkyne-containing building blocks. In combination with direct screening of the crude reaction products, this method led to the rapid identification of a lead structure and readily enabled optimization of both azide and alkyne fragments. Replacement of the triazole with a range of alternative linkers led to greatly reduced protease inhibition; however, further functionalization of the triazoles at the 5-position gave a series of compounds with increased activity, exhibiting Ki values as low as 8 nM.

Catalysis↗

Radical azidonation of aldehydes.

Aliphatic and aromatic aldehydes can be converted to acyl azides by treatment with iodine azide at 0-25 degrees C. If the reaction is performed at reflux Curtius rearrangement occurs and carbamoyl azides are obtained in 70-97% yield from the aldehyde. The reaction was shown to have a radical mechanism.

Journal Article↗

Mechanisms of Staudinger reactions within density functional theory.

The Staudinger reactions of substituted phosphanes and azides have been investigated by using density functional theory. Four different initial reaction mechanisms have been found. All systems studied go through a cis-transition state rather than a trans-transition state or a one-step transition state. The one-step pathway of the phosphorus atom attacking the substituted nitrogen atom is always unfavorable energetically. Depending on the substituents on the azide and the phosphane, the reaction mechanism with the lowest initial reaction barrier can be classified into three categories: (1). like the parent reaction, PH(3) + N(3)H, the reaction goes through a cis-transition state, approaches a cis-intermediate, overcomes a PN-bond-shifting transition state, reaches a four-membered ring intermediate, dissociates N(2) by overcoming a small barrier, and results in the final products: N(2) and a phosphazene; (2). once reaching the cis-intermediate, the reaction goes through the N(2)-eliminating transition state and produces the final products; (3). the reaction has a concerted initial cis-transition state, in which the phosphorus atom attacks the first and the third nitrogen atoms of the azide simultaneously and reaches an intermediate, and then the reaction goes through similar steps of the first reaction mechanism. In contrast to the previous predictions on the relative stability of the unsubstituted cis-configured phosphazide intermediate and the unsubstituted trans-configured phosphazide intermediate, the total energy of the substituted trans-configured phosphazide intermediate is close to that of the substituted cis-configured phosphazide intermediate. The preference of the initial cis-transition state reaction pathway is thoroughly discussed. The relative stability of the cis- and the trans-intermediates is explored and analyzed with the aid of molecular orbitals. The effects of substituents and solvent effects on the reaction mechanisms of the Staudinger reactions are discussed in detail.

Journal Article↗

4-Azido-2-pyrimidinone Nucleosides and Related Chemistry.

As a part of azide prodrug approach, we synthesized a 4-azido analog of ara-C (4) as a prodrug for ara-C. The compound 4 was obtained from 1-(beta-D-arabinofuranosyl)uracil (1) in three steps. At pH 7.0 and 11.0, a loss of UV absorption of the compound 4 was observed resulting from a transformation that was proved by identifying the transformed product 5 by 1-D, and 2-D NMR as well as tandem mass spectral studies. In NMR studies, changes in the chemical shifts were observed at positions 5, 6, 1', and 2' between the compounds 4 and 5. A molecular peak at m/z 270.1 (MH(+)) was observed in the mass spectra of compounds 4 and the transformed product 5. A fragment at 180.2 was identified to be the compound 6, containing the 6,2'-anhydro linkage of compound 5. The X-ray analysis indicated that compound 4 exists as 1-(beta-D-arabinofuranosyl)tetrazolo[4,5-c]pyrimidin-2-one, with the azide moiety cyclized. To understand if the chemical instability of the nucleoside 4 was due to the arabino configuration of 2'-OH or due to the azido moiety, we also studied 1-(2,3-dideoxy-2-fluoro-beta-D-arabinofuranosyl)tetrazolo[4,5-c]pyrimidin-2-one (11) and 4-azido-1-methyl-2-pyrimidinone (15). At pH 2.0 and 7.0, similar UV profiles were observed for compounds 11 and 15. However, at pH 11.0, lambda(max) shifted slowly to lower wavelength for both compounds 11 and 15. In a separate kinetic study, they were stable at pH 7.4 for up to 2.45 h. From the NMR and high-resolution mass spectral studies, it was concluded that in the presence of ammonium hydroxide, an addition of amine occurred at 6-position of compound 11. Thus, the stability profiles of compounds 4, 11, and 15 were different. The instability and the formation of 2',6-anhydro bond in compound 4 in nonacidic media was due to the presence of 2'-OH in the arabino configuration and probably not due to the azide group.

Journal Article↗

Curtius rearrangement of aromatic carboxylic acids to access protected anilines and aromatic ureas.

The reaction of a chloroformate or di-tert-butyl dicarbonate and sodium azide with an aromatic carboxylic acid produces the corresponding acyl azide, presumably through the formation of an azidoformate. The acyl azide undergoes a Curtius rearrangement to form an isocyanate derivative which is trapped either by an alkoxide or by an amine to form the aromatic carbamate or urea. The reaction conditions are compatible with a variety of functional groups and allow the synthesis of a number of aniline derivatives containing alkyl, halide, nitro, ketone, ether, and thioether substituents. [reaction: see text]

Aniline Compounds↗

On the utility of the azido transfer protocol: synthesis of 2- and 5-azido N-methylimidazoles, 1,3-thiazoles and N-methylpyrazole and their conversion to triazole-azole bisheteroaryls.

The azido transfer procedure of heteroaryllithium and tosyl azide was used to synthesize selected 2- and 5-azidoazoles. This procedure, which is based on the fragmentation of the appropriate lithium triazene salts 1a-7a, successfully afforded 2-azido-N-methylimidazole 1, 2-azido-1,3-thiazole 2, 2-azidobenzo-1,3-thiazole 3, 5-azido-N-methylpyrazole 4, 5-azido-N-methylimidazole 6[via 2-(trimethylsilyl)-5-azido-N-methylimidazole 5], and 5-azido-1,3-thiazole 7 (via 5-lithio-1,3-thiazole), but attempts to prepare 5-azido-2-(trimethylsilyl)-1,3-thiazole 8 from the corresponding triazene 7a failed, affording only the desilylated azide in poor yield. Azides - underwent 1,3-dipolar cycloaddition when mixed with neat (trimethylsilyl)acetylene, giving 1-heteroaryl-4-trimethylsilyl-1,2,3-triazoles 1b-7b generally in very high yields.

Journal Article↗

Syntheses and structures of metal tetrazole coordination polymers.

Two salts and seven copper(I/II) and silver(I) coordination polymers containing tetrazolyl ligands have been hydro(solvo)thermal synthesized by metal salts, NaN3 and various nitriles generated via [2 + 3] cycloaddition reactions of organonitriles and sodium azide. The study also shows that in some cases the azide can play a dual role in the in situ syntheses of metal tetrazole complexes, namely, starting material for tetrazole ligand and co-ligand in the tetrazole-based coordination complexes. Compounds and are simple salts of ammonium and sodium 5-methyltetrazolate. Compound has a 3-D framework with intersecting channel and unprecedented (4(9).6(6)) topology constructed from mixed-valent Cu8 clusters. Compounds and are isomorphous, and have 3-D organic-inorganic frameworks constructed by [M2(mtta)]+ (Hmtta = 5-methyltetrazole) ribbon and [M2(N3)]+ (M = Cu, Ag) layer two types of structural motifs, which contains an mu(4)-1,1,1,3 azide. Compound is a 3-D four-connected chiral complex with (4(2).8(4))(Cu)(4(2).8(2).10(2))(tta) topology. The structure of consists of 2-D three-connected layers that are linked by ligand-unsupported Ag(I)...Ag(I) interactions to form a 3-D supramolecular array. Compound shows a 3-D chiral framework containing tetrahedrally and linearly coordinated Ag(I) ions and mu3- and mu4-two types of 5-propyltetrazolate. Compound has a 2-D layered structure formed by linkage of [Ag(tetrazolyl)] ribbons via C-C and N-Ag bonds. Magnetic measurement confirmed that there are two Cu(II) ions and six Cu(I) ions per Cu8 unit consistent with a mixed-valent Cu(I,II) complex.

Journal Article↗