Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “atomic force microscopy”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83Linked to original sources
PubMed2003

In situ observation of the surface processes involved in dissolution from the cleavage surface of calcite in aqueous solution using combined scanning electrochemical-atomic force microscopy (SECM-AFM).

The surface processes involved in the initial stages of the proton-assisted dissolution of the calcite single crystal cleavage plane (1014) have been identified using a combined scanning electro-chemical-atomic force microscope (SECM-AFM). This instrument employs a platinum-coated AFM probe, which functions as an electrode as well as a high-resolution topographical sensor. Dissolution in this arrangement is effected by the local electrogeneration of protons, produced by oxidation of water at the probe electrode. By careful control of the applied potential, it is possible to vary the magnitude of the electrogenerated flux of protons from the probe towards the calcite surface. Crucially, by generating a small proton flux for short time periods (0.5 s) it is possible to observe and monitor the initial sites in the dissolution process. Topographical images were recorded in the same area of the surface both prior to and after inducing dissolution, as a function of the proton flux. At low proton fluxes, of the order of 1 nmol cm-2s-1 or less, the surface was observed to dissolve by the nucleation of monolayer deep pits, with densities of about 10(8) cm-2. These pits are likely to be formed at point vacancies or atomic (impurity, for example) defects in the crystal lattice. As the proton flux was increased (over two orders of magnitude), these same etch pits were found to open into wider macro-pits, with an outline morphology that reflected the crystallographic orientation of the surface. At the highest proton fluxes, dissolution from macroscopic step edges became significant.

Journal Article↗
PubMed1991

Atomic force microscopy of hydrated phosphatidylethanolamine bilayers.

We present images of the polar or headgroup regions of bilayers of dimyristoyl-phosphatidylethanolamine (DMPE), deposited by Langmuir-Blodgett deposition onto mica substrates at high surface pressures and imaged under water at room temperature with the optical lever atomic force microscope. The lattice structure of DMPE is visualized with sufficient resolution that the location of individual headgroups can be determined. The forces are sufficiently small that the same area can be repeatedly imaged with a minimum of damage. The DMPE molecules in the bilayer appear to have relatively good long-range orientational order, but rather short-range and poor positional order. These results are in good agreement with x-ray measurements of unsupported lipid monolayers on the water surface, and with electron diffraction of adsorbed monolayers.

Biophysical Phenomena↗
PubMed2003

Nanoscopic lipid domain dynamics revealed by atomic force microscopy.

Intrinsic heterogeneities, represented as domain formations in biological membranes, are important to both the structure and function of the membranes. We observed domain formations in mixed lipid bilayers of dipalmitoylphosphatidylcholine (DPPC), dilauroylphosphatidylcholine (DLPC), and cholesterol (chol) in a fluid environment using an atomic force microscope (AFM). At room temperature, we demonstrated that both microscopic and nanoscopic domains coexist and the DPPC-rich domain is approximately 1.4 nm higher than the surrounding DLPC-rich membrane areas as a consequence of intrinsic phase differences. DPPC-rich microscopic domains became larger as DPPC concentration increased. In cholesterol-free mixtures, nanoscopic DPPC-rich domain sizes ranged from 26 to 46 nm depending on phospholipid concentration. Domain size varied between 33 and 48 nm in the presence of cholesterol (0 < or = [chol] < or = 40). The nanoscopic domains were markedly fragmented near [chol] = 0.135 and appeared to fuse more readily into microscopic domains at higher and lower [chol]. By phase balance analyses we demonstrated phase behavior differences between a free-vesicle GUV system studied by confocal light microscopy and a supported membrane system studied by AFM. We propose a new three-dimensional phase diagram elucidating the effects of a solid substrate support on lipid phase behavior relevant to complex membrane phase phenomena in biological systems.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2005

Detection of single-electron charging in an individual InAs quantum dot by noncontact atomic-force microscopy.

Single-electron charging in an individual InAs quantum dot was observed by electrostatic force measurements with an atomic-force microscope (AFM). The resonant frequency shift and the dissipated energy of an oscillating AFM cantilever were measured as a function of the tip-back electrode voltage, and the resulting spectra show distinct jumps when the tip was positioned above the dot. The observed jumps in the frequency shift, with corresponding peaks in dissipation, are attributed to a single-electron tunneling between the dot and the back electrode governed by the Coulomb blockade effect, and are consistent with a model based on the free energy of the system. The observed phenomenon may be regarded as the "force version" of the Coulomb blockade effect.

Journal Article↗
PubMed2003

Adsorption isotherm and atomic force microscopy studies of the interactions between polymers and surfactants on steel surfaces in hydrocarbon media.

The adsorption isotherms for certain polymer and surfactant molecules (and in some cases their mixtures) on stainless steel beads from isooctane have been obtained, together with corresponding adsorbed layer thicknesses, using an atomic force microscope. The polymer is a terminally functionalised (ethylene diamine), low molecular weight polyisobutylene (PIB) derivative and the surfactants are basically alkyl or alkyl phenol alkoxylate molecules, which in one case has been derivatised with an amino functionality. The results indicate the presence of multilayers at the stainless steel-isooctane interface. Theoretical analysis of the surfactant adsorption isotherms suggests molecular aggregation at the interface with an aggregation number between 2 and 6, at the highest coverages. The adsorption of the polymer is reduced in the presence of the surfactant molecules. The polymer leaches metal ions from the steel surface at higher concentrations.

Journal Article↗
PubMed2000

The Early Stages of Native Enamel Dissolution Studied with Atomic Force Microscopy.

Food-induced demineralization (erosion) is one of the key factors in surface structural changes of tooth enamel, with soft drinks being a significant etiological agent. The objective of this study was to measure early stages of enamel loss with high accuracy on native enamel surfaces combined with qualitative observations of changes in the surface morphology using the atomic force microscope (AFM). Native unerupted third molar surfaces were partly covered with a gold reference layer. Samples were imaged with the AFM before dissolution (at baseline) and after exposure to three different drinks (mineral water, a "toothkind" blackcurrant drink, and a lemon and lime juice drink) at five different exposure times (15 min, 30 min, 1 h, 2 h, and 3 h). The changes in the surface morphology were investigated qualitatively as well as quantitatively. This study showed that the maximum material loss occurred at the aprismatic parts of the enamel close to the perikymata. The maximum enamel loss was greatest for the lemon and lime juice drink and lowest for water. A two-way ANOVA of the transformed data, employing the natural logarithm, showed a statistically significant difference between both the drinks and the exposure time at a 95% confidence level (P=0.000). This demonstrates that the AFM is a suitable tool for measuring early stages of enamel demineralization. Copyright 2000 Academic Press.

Journal Article↗
PubMed2001

Examination of line crossings by atomic force microscopy.

Until now, the most widely used methods for the forensic examination of line crossings in documents were optical and electron microscopy. The combination of both techniques allows one in most cases to establish the sequence of lines. The recent development of scanning probe microscopy [1] gives an opportunity to complement or even replace the classical instruments used in this field. Scanning probe microscopes have been designed to study surfaces at high magnification. The aim of this study was to verify if their most popular member, the atomic force microscope (AFM) [2], can be applied to line crossing problems. The results show for the first time that AFM images present the same qualitative information obtained by scanning electron microscope (SEM) images and, consequently, allow the determination of the line crossing sequence under ambient conditions without vacuum and conductive coating of specimens.

Forensic Medicine↗
PubMed1997

Single Molecule Force Spectroscopy on Polysaccharides by Atomic Force Microscopy

Recent developments in piconewton instrumentation allow the manipulation of single molecules and measurements of intermolecular as well as intramolecular forces. Dextran filaments linked to a gold surface were probed with the atomic force microscope tip by vertical stretching. At low forces the deformation of dextran was found to be dominated by entropic forces and can be described by the Langevin function with a 6 angstrom Kuhn length. At elevated forces the strand elongation was governed by a twist of bond angles. At higher forces the dextran filaments underwent a distinct conformational change. The polymer stiffened and the segment elasticity was dominated by the bending of bond angles. The conformational change was found to be reversible and was corroborated by molecular dynamics calculations.

Journal Article↗
PubMed2006

Quantification of particle-bubble interactions using atomic force microscopy: A review.

The attachment of particles to bubbles in solution is of fundamental importance to several industrial processes, most notably in the process of froth flotation. During this process hydrophobic particles attach to air bubbles in solution, which allows them to be separated as froth at the surface. The addition of chemicals can help to modulate these interactions to increase the yield of the minerals of interest. Over the past decade the atomic force microscope (AFM) has been adapted for use in studying the forces involved in the attachment of single particles to bubbles in the laboratory. This allows the measurement of actual DLVO (Derjaguin, Landau, Vervey and Overbeek) forces and adhesive contacts to be measured under different conditions. In addition contact angles may be calculated from features of force versus distance curves. It is the purpose of this article to illustrate how the colloid probe technique can be used to make single particle-bubble interactions and to summarise the current literature describing such experiments.

Journal Article↗
PubMed1993

Atomic force microscopy of biochemically tagged DNA.

Small fragments of DNA of known length were made with the polymerase chain reaction. These fragments had biotin molecules covalently attached at their ends. They were subsequently labeled with a chimeric protein fusion between streptavidin and two immunoglobulin G-binding domains of staphylococcal protein A. This tetrameric species was expected to bind up to four DNA molecules via their attached biotin moieties. The DNA-protein complex was deposited on mica and imaged with an atomic force microscope. The images revealed the protein chimera at the expected location at the ends of the strands of DNA as well as the expected dimers, trimers, and tetramers of DNA bound to a single protein.

Bacterial Proteins↗
PubMed1994

Twisted ribbon structure of paired helical filaments revealed by atomic force microscopy.

Progressive deposition of phosphorylated tau into the paired helical filaments (PHF) that compose neurofibrillary tangles, dystrophic neurites, and neuropil threads is an obligate feature of Alzheimer's disease. The standard model of PHF structure, derived from electron microscopic studies, suggests that two 8- to 10-nm filaments each composed of three to four protofilaments are wound into a helix with a maximal diameter of -20 nm and a half period of 65 to 80 nm. However, recent vertical platinum-carbon replicas of PHF more closely resemble a thin helical ribbon without constitutive protofilaments. Here we report that native PHF imaged with an atomic force microscope appear as twisted ribbons rather than the generally accepted structure derived from electron microscopic studies. These data imply that the assembly of PHF is not due to the twisting of pair-wise filaments but rather the helical winding of self-associated tau molecules arranged into a flattened structure. Future structural models of PHF should be based on quantitative data obtained from imaging techniques, such as scanning probe microscopy, which do not require harsh specimen preparation procedures.

Alzheimer Disease↗
PubMed2002

Pull-off force measurements between rough surfaces by atomic force microscopy.

Direct measurements of the pull-off (adhesion) forces between pharmaceutical particles (beclomethasone dipropionate, a peptide-type material, and lactose) with irregular geometry and rough polymeric surfaces (series of polypropylene coatings, polycarbonate, and acrylonitrile-butadiene-styrene) were carried out using the atomic force microscope. These measurements showed that roughness of the interacting surfaces is the significant factor affecting experimentally measured pull-off forces. A broad distribution of pull-off force values was noted in the measurements, caused by a varying adhesive contact area for a particle located on rough substrate. The possibility of multiple points of contact between irregularly shaped pharmaceutical particles and substrate surfaces is demonstrated with nanoindentations of the particle in a fluoro-polymer film. Force-distance curves showing the "sawtooth" pattern are additional evidence that particles make contact with substrates at more than one point. Reduced adhesion of 10- to 14-microm-diameter lactose and peptide material particles to the polypropylene coatings with a roughness of 194 nm was found in this study. Similar pull-off force versus roughness relationships are also reported for the model spherical particles, silanized glass particle with a size of 10 microm and polystyrene particle with a diameter of 9 microm, in contact with polypropylene coatings of varying roughness characteristics. It was found that the model recently proposed by Rabinovich et al. (J. Colloid Interface Sci. 232, 1-16 (2000)) closely predicts the pull-off forces for glass and lactose particles. On the other hand, the adhesion of the peptide material and polystyrene particle to polypropylene is underestimated by about an order of magnitude with the theoretical model, in which the interacting substrates are treated as rigid materials. The underestimate is attributed to the deformation of the peptide material and polystyrene particles.

Journal Article↗
PubMed1998

Atomic-force microscopy on the olfactory dendrites of the silkmoths antheraea polyphemus and A. pernyi

Olfactory transduction is thought to occur in the outer dendritic membrane of insect olfactory receptor neurons. Electrophysiological studies have indicated that the outer dendritic membrane has non-specific cation channels and inositol-triphosphate-dependent Ca2+ channels. The presence of such channels is further supported by the observation that pheromone-stimulated dendrites take up cobalt. However, to date, there is no structural evidence for these channels. Therefore, in order to search for putative ion channels, we have imaged the membrane of the olfactory dendrites in the scanning electron microscope (SEM) and the atomic-force microscope (AFM), after extruding the dendrites out of the olfactory hairs and fixing them on plastic coverslips. With the aid of the SEM, we could see the beaded structure of the dendrite but no fine structural details, as the membrane was sputtered with gold. With the use of the contact mode of the AFM, we could see "pores" that were deeper than 3 nm and with a diameter of about 15 nm. The density of the "pores" was approximately 20/ microm2 or 10 000 pores per thick dendrite. We believe these to be putative ion channels based on indirect evidence.

Journal Article↗
PubMed2005

Atomic force microscopy study of the interaction between adsorbed poly(ethylene oxide) layers: effects of surface modification and approach velocity.

The interaction forces between layers of the triblock copolymer Pluronic F108 adsorbed onto hydrophobic radio frequency glow discharge (RFGD) thin film surfaces and hydrophilic silica, in polymer-free 0.15 M NaCl solution, have been measured using the atomic force microscope (AFM) colloid probe technique. Compression of Pluronic F108 layers adsorbed on the hydrophobic RFGD surfaces results in a purely repulsive force due to the steric overlap of the layers, the form of which suggests that the PEO chains adopt a brush conformation. Subsequent fitting of these data to the polymer brush models of Alexander-de Gennes and Milner, Witten, and Cates confirms that the adsorbed Pluronic F108 adsorbs onto hydrophobic surfaces as a polymer brush with a parabolic segment density profile. In comparison, the interaction between Pluronic F108 layers adsorbed on silica exhibits a long ranged shallow attractive force and a weaker steric repulsion. The attractive component is reasonably well described by van der Waals forces, but polymer bridging cannot be ruled out. The weaker steric component of the force suggests that the polymer is less densely packed on the surface and is less extended into solution, existing as polymeric isolated mushrooms. When the surfaces are driven together at high piezo ramp velocities, an additional repulsive force is measured, attributable to hydrodynamic drainage forces between the surfaces. In comparing theoretical predictions of the hydrodynamic force to the experimentally obtained data, agreement could only be obtained if the flow profile of the aqueous solution penetrated significantly into the polymer brush. This finding is in line with the theoretical predictions of Milner and provides further evidence that the segment density profile of the adsorbed polymer brush is parabolic. A velocity dependent additional stepped repulsive force, reminiscent of a solvation oscillatory force, is also observed when the adsorbed layers are compressed under high loads. This additional force is presumably a result of hindered drainage of water due to the presence of a high volume fraction of polymer chains between the surfaces.

Journal Article↗
PubMed2000

New Approach to the Study of Particle-Surface Adhesion Using Atomic Force Microscopy.

The colloidal probe technique is commonly employed to determine the adhesion force between a particle and a solid surface. Characterization of the adhesion of a particle across a surface can be as important, if not more so, as the determination of an average value for the adhesion. Unfortunately, the measurement of the variation in adhesion can be difficult at best. A new approach for studying particle-surface adhesion based on the force-volume technique is presented. Upon combining the force-volume technique with a colloidal probe, not only is it possible to determine the average adhesion force, but an image of the spatial variation of the adhesion can also be obtained. This method is envisioned to have great potential for examining and analyzing the adhesion behavior in complex natural and technological systems. Copyright 2000 Academic Press.

Journal Article↗
PubMed1993

Immobilizing DNA on gold via thiol modification for atomic force microscopy imaging in buffer solutions.

Thiols, dialkylsulfides, and dialkyldisulfides are known to be chemisorbed with high affinity on gold. We have prepared DNAs of specific length and sequence carrying thiol groups at each end. For this purpose, primers with an HS-(CH2)6-arm at the 5'-end were used to amplify segments of plasmid DNA via the polymerase chain reaction. These thiolated DNAs bind strongly to the large, ultraflat Au surfaces which we have recently described [Hegner, M. et al. (1993) Surface Sci. 291, 39-46], and can be imaged by AFM in liquids (aqueous solutions or propanol). The lengths obtained in the AFM images are consistent with the DNA being in a native B-conformation.

Base Sequence↗