Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Films”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83Linked to original sources
PubMed2005

Correlation of the number of thiophene units with structural order and carrier mobility in unsubstituted even- and odd-numbered alpha-oligothiophene films.

We investigate the correlation of the number of thiophene units with the structural order and carrier mobility of the films through studies on thin-film transistors (TFTs) based on alpha-quinquethiophene (5T), alpha-sexithiophene (6T), and alpha-septithiophene (7T). The X-ray diffraction (XRD) data of the nT films deposited at low substrate temperatures present obviously different structural orders depending on the parity of the number of thiophene units. Although even-numbered nT films present well-ordered structures and large carrier mobilities, odd-numbered nT films present two different crystalline polymorphs and vastly low carrier mobilities reflecting the coexistence of two crystalline polymorphs. However, the XRD data of both even- and odd-numbered nT films deposited at high substrate temperatures indicate that the nT molecules form single well-ordered structures. Those ordered TFTs exhibit large carrier mobilities accompanying an increase in the number of thiophene units, 0.05, 0.08, and 0.13 cm2 V(-1) s(-1) for 5T, 6T, and 7T, respectively. The parity of the number of thiophene units affects the structural order intrinsically in grown thin films, and affects carrier mobilities extrinsically in their TFTs.

Journal Article↗
PubMed2005

Supramolecular assemblies and molecular recognition of amphiphilic schiff bases with barbituric acid in organized molecular films.

A bolaform Schiff base, N,N'-bis(salicylidene)-1,10-decanediamine (BSC10), has been synthesized and its interfacial hydrogen bond formation or molecular recognition with barbituric acid was investigated in comparison with that of a single chain Schiff base, 2-hydroxybenzaldehyde-octadecylamine (HBOA). It has been found that while HBOA formed a monolayer at the air/water interface, the bolaform Schiff base formed a multilayer film with ordered layer structure on water surface. When the Schiff bases were spread on the subphase containing barbituric acid, both of the Schiff bases could form hydrogen bonds with barbituric acid in situ in the spreading films. As a result, an increase of the molecular areas in the isotherms was observed. The in situ H-bonded films could be transferred onto solid substrates, and the transferred multilayer films were characterized by various methods such as UV-vis and FT-IR spectrosopies. Spectral changes were observed for the films deposited from the barbituric acid subphase, which supported the hydrogen bond formation between the Schiff bases and barbituric acid. By measuring the MS-TOF of the deposited films dissolved in CHCl3 solution, it was concluded that a 2:1 complex of HBOA with barbituric acid and a 1:2 complex of BSC10 with barbituric acid were formed. On the other hand, when the multilayer films of both Schiff bases were immersed in an aqueous solution of barbituric acid, a similar molecular recognition through the hydrogen bond occurred. A clear conformational change of the alkyl spacer in the bolaform Schiff base was observed during the complex formation with the barbituric acid.

Journal Article↗
PubMed2005

Photophysical properties of [60]fullerenes and phthalocyanines embedded in ordered mesoporous silica films annealed at various temperatures.

The photophysical properties of fullerene and/or phthalocyanine dyes embedded in ordered mesoporous silica films and the influence of annealing temperature on the nature of the immobilized dye molecules has been investigated using photoluminescence (PL) and diffuse reflectance (DR) studies. The PL and DR studies show that fullerene (C60) and/or zinc phthalocyanine (ZnPc) molecules incorporated into transparent mesoporous silica films, via either sol-gel or grafting routes, exist predominantly in monomeric form. Careful choice of annealing temperature, between 25 and 225 degrees C, can further enhance monomeric dispersion. For C60-containing films, monomeric dispersion of fullerene was observed for annealing temperatures up to 175 degrees C for sol-gel derived films and 225 degrees C for grafted films. Both sol-gel and grafted ZnPc-containing films showed evidence of monodispersed phthalocyanine for annealing temperatures up to 225 degrees C. In general, annealing temperatures in the range 125-175 degrees C were found to yield optimal monodispersion of the dye molecules. When both C60 and ZnPc were incorporated into the silica films, no evidence of interaction between the dyes, i.e., charge-transfer transitions or the formation of fullerene/phthalocyanine charge-transfer complexes, was observed. This suggests that embedded fullerene and phthalocyanine molecules may be used for the preparation of solid-state optical limiters, based on reverse saturable absorption, where monomeric dispersion of the dye molecules is important.

Journal Article↗
PubMed2005

Controlled growth of mesostructured crystalline iron oxide nanowires and Fe-filled carbon nanotube arrays templated by mesoporous silica SBA-16 film.

The three-dimensional (3D) accessible pore structures (Imm space groups) of continuous mesoporous silica SBA-16 thin films have been prepared by a dip-coating technique in nonaqueous media under acidic conditions on indium-tin oxide glass (ITO). The films are oriented with the (111) crystal plane perpendicular to the surface of the film. On one hand, deposition of iron metal into the mesopores of SBA-16 films was achieved by using an electrochemical method. The Fe2O3 nanowire arrays were synthesized. The crystalline structures of porous Fe2O3 nanowires and nanorods were studied via TEM, SEM, and XRD. On the other hand, a small amount of Fe was deposited into the pores of the SBA-16 thin film as a catalyst, and carbon nanotube arrays formed inside the pores of SBA-16 film were fabricated by catalytic decomposition of acetylene at 700 degrees C. The second-order template synthesis method for preparing the ordered array of carbon nanotubes filled with Fe has been used. The carbon nanotubes are very uniform in diameter and length and are aligned vertically with respect to the SBA-16 film.

Journal Article↗
PubMed2005

Molecularly organized Langmuir-Blodgett films from a ruthenium biphosphine complex.

Langmuir-Blodgett (LB) films from a ruthenium complex mer-[RuCl3 (dppb)(4-Mepy)] (dppb = PPh2 (CH2)4PPh2; 4-Mepy = 4-methylpyridine), termed Ru-Pic, display a distinct color, which is different from the coloration exhibited by cast films or chloroform solutions. The solution and cast films are red, while the LB films are green-bluish. The manifestation of the blue color in the LB film finds its explanation in a unique absorption band at 690 nm, which is associated with the oxidation of the phosphine moieties. Fluorescence emission and absorption-reflection infrared spectroscopy measurements revealed the molecular organization in the LB films. In contrast, cast films showed a random distribution of complexes. Surface-enhanced Raman scattering was also used in an attempt to identify the main interactions in Ru-Pic.

Journal Article↗
PubMed2005

Photoelectrochemical properties of a dinitrogen-fixing iron titanate thin film.

The band edge positions of a nitrogen-fixing nanostructured semiconductor thin film are determined both in the dark through spectroelectrochemistry and under irradiation by photovoltage measurements. Both methods afford the same result indicating that the film in addition to the dinitrogen-fixing phase Fe2Ti2O7 also contains titanium dioxide. Thus, both methods enable the analysis of a mixture of semiconducting thin films. For pH 7, values of -0.4 and +1.6 V were estimated for the conduction and valence band edge of the iron titanate film, respectively. A 3-fold photocurrent increase by methanol was observed only when the film was calcined at 600 degrees C but not below or above this temperature; the films calcined at temperatures other than 600 degrees C were also inactive in the photoreduction of dinitrogen. For a matter of comparison, an iron(III) oxide film was characterized analogously.

Journal Article↗
PubMed2005

Dependence of electrochemical properties of vanadium oxide films on their nano- and microstructures.

Platelet- and fibrillar-structured V2O5 films have been prepared by solution methods, and their electrochemical Li+ intercalation properties have been studied. Platelet film consists of 20-30 nm sized V2O5 particles with random orientation, whereas fibrillar film is comprised of randomly oriented fibers though most of them protrude from the substrate surface. These platelet- and fibrillar-structured films exhibit relatively larger surface area and shorter diffusion path for Li+ intercalation than plain thin film structure. The processing methods, the discharge capacity, and cyclic performance of these films are compared with those of the conventional plain structured film.

Journal Article↗
PubMed2005

Orientation of dye molecules in DNA-based films with chain alignment and judgment of their DNA-binding modes.

Novel composite films of chain-oriented DNA, which contain the DNA-binding dyes aligned in specific orientation, were successfully prepared by drying the solution under a horizontal magnetic field. Most of the dye-DNA composite films showed linear dichroism, as revealed by polarized ultraviolet-visible (UV-vis) spectroscopy. The intercalators, ethidium bromide and acridine orange, were fixed in chain-oriented DNA films in a similar binding manner as in solutions. Also, Hoechst 33258 and 4',6-diamidino-2-phenylindole were found to be aligned along the minor groove, even in the solid films. Thus, our new method of preparing dye-DNA composite films with chain orientation is useful for aligning small molecules, and it will provide views of the novel anisotropic materials expected in various application fields. We used this method to prepare composite DNA films with newly designed original compounds. Seven of nine dyes were judged to bind obviously to DNA as intercalators by polarized UV-vis spectroscopy. The DNA-binding manners were further analyzed by fluorescence anisotropy measurements. On the basis of the curves for the rotational angle dependence of the anisotropy, we were able to estimate the angles between the transition-dipole moments of dyes and the aligned chain axis of DNA. Interestingly, two original compounds were found to be in the tilted forms with regard to the plane of base pairs. We emphasize here that the method using aligned dye-DNA films is very convenient for identifying the binding modes of the compounds for double-stranded DNA.

Animals↗
PubMed2005

Surface reactions of molecular and atomic oxygen with carbon phosphide films.

The surface reactions of atomic and molecular oxygen with carbon phosphide films have been studied using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Carbon phosphide films were produced by ion implantation of trimethylphosphine into polyethylene. Atmospheric oxidation of carbon phosphide films was dominated by phosphorus oxidation and generated a carbon-containing phosphate surface film. This oxidized surface layer acted as an effective diffusion barrier, limiting the depth of phosphorus oxidation within the carbon phosphide film to < 3 nm. The effect of atomic oxygen (AO) exposure on this oxidized carbon phosphide layer was subsequently probed in situ using XPS. Initially AO exposure resulted in a loss of carbon atoms from the surface, but increased the surface concentration of phosphorus atoms as well as the degree of phosphorus oxidation. For more prolonged AO exposures, a highly oxidized phosphate surface layer formed that appeared to be inert toward further AO-mediated erosion. By utilizing phosphorus-containing hydrocarbon thin films, the phosphorus oxides produced during exposure to AO were found to desorb at temperatures >500 K under vacuum conditions. Results from this study suggest that carbon phosphide films can be used as AO-resistant surface coatings on polymers.

Journal Article↗
PubMed2006

IR spectra of photopolymerized C60 films. Experimental and density functional theory study.

IR spectra of photopolymerized fullerene films obtained by simultaneous deposition and UV irradiation were measured in the range of 1500-450 cm(-1). The degree of the polymerization of the C60 films was estimated to be about 95%. To assist the assignment of the experimental IR spectra of the films, quantum chemical calculations of the equilibrium structures of the C60 dimers and trimers were performed at the DFT(B3LYP)/3-21G level of theory. Next, IR frequencies and intensities for those structures were calculated. For the five-trimer structures found in the calculations, the relative stabilities were determined at the B3LYP/4-31G and B3LYP/6-31G levels and used to select the lowest-energy trimers, which are Trimer A (angle between monomer centers is 90 degrees ) and Trimer B (angle between monomer centers is 120 degrees). Next, the IR spectra of the polymerized fullerene films were compared with the calculated frequencies of the lowest-energy dimer and the two lowest-energy trimers. On the basis of this analysis and on the comparison of the film spectra with the IR spectra of the C60 dimer and trimer spectra obtained by other methods, it was shown that the main components of the films are C60 dimers and the orthorhombic (O) polymer phase. The tetragonal (T) and rhombohedral (R) polymers, as well as small amounts of monomers, were also found. Although vibrational frequencies of different C60 phases are similar in most cases, we found several unique spectral features of the C60 dimer and other polymers that may be used to determine the composition of the polymerized C60 film.

Fullerenes↗
PubMed2006

Single molecule spectroscopy studies of diffusion in mesoporous silica thin films.

Single molecule spectroscopy is applied in studies of diffusion and surface adsorption in sol-gel-derived mesoporous silica thin films. Mesoporous films are obtained by spin casting surfactant-templated sols onto glass substrates. Small-angle X-ray diffraction results are consistent with hexagonally ordered mesophases in as-synthesized (i.e., surfactant-containing) films. Upon calcination, a 30% contraction and disordering of these structures occurs. Nile Red is used as a fluorescent probe of both the as-synthesized and calcined films. It is loaded into the samples at subnanomolar levels either prior to spin casting or after calcination. Fluorescence imaging and single-point fluorescence time transients show the dye molecules to be relatively mobile in the as-synthesized samples. In contrast, the molecules appear entrapped at fixed locations in dry calcined films. In calcined films rehydrated under high humidity conditions, the Nile Red molecules again become mobile. Time transients obtained from the as-synthesized and rehydrated samples provide clear evidence for frequent reversible adsorption of the dye to the silica surfaces. Autocorrelations of the time transients provide quantitative data on the mean diffusion coefficients (D = 2.4 x 10(-10) and 2.6 x 10(-10) cm2/s) and mean desorption times (1/k = 25 and 40 s) for the as-synthesized and rehydrated films, respectively. The results prove both water and surfactant play important roles in governing matrix interactions and mass transport.

Journal Article↗
PubMed2006

Changes in electrochemical and optical properties of oligoalkylthiophene film induced by bipolaron formation.

An unusual electrochemical response is found for oligoalkylthiophene (13T) films in acetonitrile. A pristine 13T film exhibits a stable redox wave in cyclic voltammogram when the anodic potential limit is below 0.6 V, whereas the redox peaks shift clearly to the negative side by ca. 0.1 V once the 13T film experiences a potential beyond 0.7 V. After this electrochemical stimulus is imposed on a pristine 13T film, the absorption and emission spectra change their features. These findings, along with the measurements with varying thicknesses of 13T films, suggest that a pristine 13T film is a mixture of two phases to be oxidized at separate potentials and that one phase can be switched to the other by the potential stimulation. A plausible model proposed for explaining these observations assumes that a key parameter characteristic of the two phases is a conformation of 13T molecules in the solid state and a change in conformation, leading to the shift of the redox potentials and the change of optical properties, is induced by electrochemical generation of bipolarons on the half units of the oligomers in the pristine 13T film.

Journal Article↗
PubMed2005

Studies of tetracene- and pentacene-based organic thin-film transistors fabricated by the neutral cluster beam deposition method.

The neutral cluster beam deposition (NCBD) method has been applied to produce and characterize organic thin-film transistors (OTFTs) based upon tetracene and pentacene molecules as active layers. Organic thin films were prepared by the NCBD method on hexamethyldisilazane (HMDS)-untreated and -pretreated silicon dioxide (SiO2) substrates at room temperature. The surface morphology and structures for the tetracene and pentacene thin films were examined by atomic force microscopy (AFM) and X-ray diffraction (XRD). The measurements demonstrate that the weakly bound and highly directional neutral cluster beams are efficient in producing high-quality single-crystalline thin films with uniform, smooth surfaces and that SiO2 surface treatment with HMDS enhances the crystallinity of the pentacene thin-film phase. Tetracene- and pentacene-based OTFTs with the top-contact structure showed typical source-drain current modulation behavior with different gate voltages. Device parameters such as hole carrier mobility, current on/off ratio, threshold voltage, and subthreshold slope have been derived from the current-voltage characteristics together with the effects of surface treatment with HMDS. In particular, the high field-effect room-temperature mobilities for the HMDS-untreated OTFTs are found to be comparable to the most widely reported values for the respective untreated tetracene and pentacene thin-film transistors. The device performance strongly correlates with the surface morphology, and the structural properties of the organic thin films are discussed.

Journal Article↗
PubMed2006

Two modes of transformation of amorphous calcium carbonate films in air.

Large-area amorphous calcium carbonate (ACC) films in air are shown to be transformed into crystalline calcium carbonate (CaCO(3)) films via two modes-dissolution-recrystallization and solid-solid phase transition-depending on the relative humidity of the air and the temperature. Moisture in the air promotes the transformation of ACC into crystalline forms via a dissolution-recrystallization process. Increasing the humidity increases the rate of ACC crystallization and gives rise to films with numerous large pores. As the temperature is increased, the effect of moisture in the air is reduced and solid-solid transition by thermal activation becomes the dominant transformation mechanism. At 100 and 120 degrees C, ACC films are transformed into predominantly (110) oriented crystalline films. Collectively, the results show that calcium carbonate films with different morphologies, crystal phases, and structures can be obtained by controlling the humidity and temperature. This ability to control the transformation of ACC should assist in clarifying the role of ACC in the biomineralization of CaCO(3) and should open new avenues for preparing CaCO(3) films with oriented and fine structure.

Air↗
PubMed2006

Structural stability and phase transitions in WO3 thin films.

Tungsten oxide (WO3) thin films have been produced by KrF excimer laser (lambda = 248 nm) ablation of bulk ceramic WO3 targets. The crystal structure, surface morphology, chemical composition, and structural stability of the WO3 thin films have been studied in detail. Characterization of freshly grown WO3 thin films has been performed using X-ray diffraction (XRD), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy (RS), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) measurements. The results indicate that the freshly grown WO3 thin films are nearly stoichiometric and well crystallized as monoclinic WO3. The surface morphology of the resulting WO3 thin film has grains of approximately 60 nm in size with a root-mean-square (rms) surface roughness of 10 nm. The phase transformations in the WO3 thin films were investigated by annealing in the TEM column at 30-500 degrees C. The phase transitions in the WO3 thin films occur in sequence as the temperature is increased: monoclinic --> orthorhombic --> hexagonal. Distortion and tilting of the WO6 octahedra occurs with the phase transitions and significantly affects the electronic properties and, hence, the electrochemical device applications of WO3.

Journal Article↗
PubMed2006

Uptake and UV-photooxidation of gas-phase PAHs on the surface of atmospheric water films. 1. Naphthalene.

The adsorption and photochemical reaction of naphthalene vapor at the air-water interface of water films (22 microm and 450 microm) were studied in a horizontal flow reactor. Experiments were conducted in the regime where gas-phase mass transfer resistance did not limit the uptake. The equilibrium uptake was dependent on water film thickness only below 1 microm. Bulk water-air and air-to-interface partition constants were estimated from the experiments. The equilibrium partition constant between the water film and air decreased with increasing temperature. Photochemical reaction products were isolated in the water film after exposure to UV light. Four main oxygenated products were identified (1,3-indandione, 1(3H)-isobenzofuranone (phthalide), 2H-1-benzopyran-2-one (coumarin), and 1-naphthol). The initial rates of product formation were 46 to 154% larger for the thin film (22 microm) compared to both a thick film (450 microm) and bulk aqueous phase photooxidation. The atmospheric implications of reactions in water films are discussed.

Journal Article↗
PubMed2006

Optical CO gas sensor using a cobalt oxide thin film prepared by pulsed laser deposition under various argon pressures.

An optical CO gas sensor was investigated using cobalt oxide thin films prepared by pulsed laser deposition. The cobalt oxide films were deposited on quartz glass and silicon wafer substrates in Ar at 0.07-133 Pa. The morphology and crystal phase of the films were changed by Ar pressure. Sensitivity was estimated as the transmittance change of the film in dry air and at 200 ppm of CO gas ambient at 350 degrees C. The morphology of the films greatly affected the sensing properties. The optimum Ar pressure for cobalt oxide film preparation for CO gas sensing was suggested to be 13.3 Pa, based on the relationship between the morphology and the optical sensor properties of the films.

Journal Article↗
PubMed2006

Gas permeability in polymer- and surfactant-stabilized bubble films.

The gas permeabilities of thin liquid films stabilized by poly(N-isopropylacrylamide) (PNIPAM) and PNIPAM-SDS (sodium dodecyl sulfate) mixtures are studied using the "diminishing bubble" method. The method consists of forming a microbubble on the surface of the polymer solution and measuring the shrinking rates of the bubble and the bubble film as the gas diffuses from the interior to the exterior of the bubble. PNIPAM-stabilized films exhibit variable thicknesses and homogeneities. Interestingly, despite these variable features, the gas permeability of the film is determined principally by the structure of the adsorbed polymer layer that provides an efficient gas barrier with a value of gas permeability coefficient that is comparable to that of an SDS Newton black film. In the presence of SDS, both the film homogeneity and the gas permeability coefficient increase. These changes are related to interactions of PNIPAM with SDS in the solution and at the interface, where coadsorption of the two species forms mixed layers that are stable but that are more porous to gas transfer. The mixed PNIPAM-SDS layers, studied previously for a single water-air interface by neutron reflectivity, are further characterized here in a vertical free-draining film using X-ray reflectivity.

Journal Article↗